Radius not giving VLAN after reconnect

Alan Buxey alan.buxey at gmail.com
Mon Sep 25 18:45:13 CEST 2017


Hi

Sounds like you've got the EAP caching enabled but are not populating the
vlan number you are returning in the cache object thus the next re-auth
uses cache but has no vlan value to reply with so you get the default vlan.

alan

On 25 Sep 2017 5:41 pm, "Matthew Pulis" <mpulis at gmail.com> wrote:

> Hi
>
> I am noticing that my WiFi clients are not getting assigned their
> respective VLAN after they reconnect to WIFI. Only works the first time.
> Any idea what would be wrong. The guys of Unifi, the brand of my APs are
> saying it is a RADIUS issue, but I doubt. Can someone please corroborate if
> my hunch is correct?
>
> Attached please find the log:
>
> radius at radius:~$ sudo freeradius -fX
> FreeRADIUS Version 3.0.15
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/dictionary
> including configuration file /etc/freeradius/radiusd.conf
> including configuration file /etc/freeradius/proxy.conf
> including configuration file /etc/freeradius/clients.conf
> including files in directory /etc/freeradius/mods-enabled/
> including configuration file /etc/freeradius/mods-enabled/mschap
> including configuration file /etc/freeradius/mods-enabled/adldap
> including configuration file /etc/freeradius/mods-enabled/always
> including configuration file /etc/freeradius/mods-enabled/soh
> including configuration file /etc/freeradius/mods-enabled/eap
> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/mods-enabled/logintime
> including configuration file /etc/freeradius/mods-enabled/exec
> including configuration file /etc/freeradius/mods-enabled/realm
> including configuration file /etc/freeradius/mods-enabled/utf8
> including configuration file /etc/freeradius/mods-enabled/date
> including configuration file /etc/freeradius/mods-enabled/echo
> including configuration file /etc/freeradius/mods-enabled/unix
> including configuration file /etc/freeradius/mods-enabled/detail.log
> including configuration file /etc/freeradius/mods-enabled/expr
> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/mods-enabled/pap
> including configuration file /etc/freeradius/mods-enabled/ldap
> including configuration file /etc/freeradius/mods-enabled/digest
> including configuration file /etc/freeradius/mods-enabled/files
> including configuration file /etc/freeradius/mods-enabled/preprocess
> including configuration file /etc/freeradius/mods-enabled/cache_eap
> including configuration file /etc/freeradius/mods-enabled/detail
> including configuration file /etc/freeradius/mods-enabled/expiration
> including configuration file /etc/freeradius/mods-enabled/chap
> including configuration file /etc/freeradius/mods-enabled/sradutmp
> including configuration file /etc/freeradius/mods-enabled/radutmp
> including configuration file /etc/freeradius/mods-enabled/passwd
> including configuration file /etc/freeradius/mods-enabled/linelog
> including configuration file /etc/freeradius/mods-enabled/unpack
> including configuration file /etc/freeradius/mods-enabled/attr_filter
> including configuration file /etc/freeradius/mods-enabled/replicate
> including files in directory /etc/freeradius/policy.d/
> including configuration file /etc/freeradius/policy.d/filter
> including configuration file /etc/freeradius/policy.d/control
> including configuration file /etc/freeradius/policy.d/canonicalization
> including configuration file /etc/freeradius/policy.d/eap
> including configuration file /etc/freeradius/policy.d/debug
> including configuration file /etc/freeradius/policy.d/dhcp
> including configuration file /etc/freeradius/policy.d/
> moonshot-targeted-ids
> including configuration file /etc/freeradius/policy.d/accounting
> including configuration file /etc/freeradius/policy.d/abfab-tr
> including configuration file /etc/freeradius/policy.d/cui
> including configuration file /etc/freeradius/policy.d/operator-name
> including files in directory /etc/freeradius/sites-enabled/
> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/sites-enabled/default
> main {
>  security {
>         user = "freerad"
>         group = "freerad"
>         allow_core_dumps = no
>  }
>         name = "freeradius"
>         prefix = "/usr"
>         localstatedir = "/var"
>         logdir = "/var/log/freeradius"
>         run_dir = "/var/run/freeradius"
> }
> main {
>         name = "freeradius"
>         prefix = "/usr"
>         localstatedir = "/var"
>         sbindir = "/usr/sbin"
>         logdir = "/var/log/freeradius"
>         run_dir = "/var/run/freeradius"
>         libdir = "/usr/lib/freeradius"
>         radacctdir = "/var/log/freeradius/radacct"
>         hostname_lookups = no
>         max_request_time = 30
>         cleanup_delay = 5
>         max_requests = 16384
>         pidfile = "/var/run/freeradius/freeradius.pid"
>         checkrad = "/usr/sbin/checkrad"
>         debug_level = 0
>         proxy_requests = yes
>  log {
>         stripped_names = no
>         auth = no
>         auth_badpass = no
>         auth_goodpass = no
>         colourise = yes
>         msg_denied = "You are already logged in - access denied"
>  }
>  resources {
>  }
>  security {
>         max_attributes = 200
>         reject_delay = 1.000000
>         status_server = yes
>  }
> }
> radiusd: #### Loading Realms and Home Servers ####
>  proxy server {
>         retry_delay = 5
>         retry_count = 3
>         default_fallback = no
>         dead_time = 120
>         wake_all_if_all_dead = no
>  }
>  home_server localhost {
>         ipaddr = 127.0.0.1
>         port = 1812
>         type = "auth"
>         secret = <<< secret >>>
>         response_window = 20.000000
>         response_timeouts = 1
>         max_outstanding = 65536
>         zombie_period = 40
>         status_check = "status-server"
>         ping_interval = 30
>         check_interval = 30
>         check_timeout = 4
>         num_answers_to_alive = 3
>         revive_interval = 120
>   limit {
>         max_connections = 16
>         max_requests = 0
>         lifetime = 0
>         idle_timeout = 0
>   }
>   coa {
>         irt = 2
>         mrt = 16
>         mrc = 5
>         mrd = 30
>   }
>  }
>  home_server_pool my_auth_failover {
>         type = fail-over
>         home_server = localhost
>  }
>  realm example.com {
>         auth_pool = my_auth_failover
>  }
>  realm LOCAL {
>  }
> radiusd: #### Loading Clients ####
>  client localhost {
>         ipaddr = 127.0.0.1
>         require_message_authenticator = no
>         secret = <<< secret >>>
>         nas_type = "other"
>         proto = "*"
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>   }
>  }
>  client localhost_ipv6 {
>         ipv6addr = ::1
>         require_message_authenticator = no
>         secret = <<< secret >>>
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>   }
>  }
>  client 192.168.100.1/24 {
>         require_message_authenticator = no
>         secret = <<< secret >>>
>         shortname = "NAS"
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>   }
>  }
> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
> 192.168.100.1/24. Please fix your configuration
> Support for old-style clients will be removed in a future release
> Debugger not attached
>  # Creating Auth-Type = eap
>  # Creating Auth-Type = PAP
>  # Creating Auth-Type = CHAP
>  # Creating Auth-Type = MS-CHAP
>  # Creating Auth-Type = LDAP
> radiusd: #### Instantiating modules ####
>  modules {
>   # Loaded module rlm_mschap
>   # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
>   mschap {
>         use_mppe = yes
>         require_encryption = yes
>         require_strong = yes
>         with_ntdomain_hack = yes
>    passchange {
>    }
>         allow_retry = yes
>         winbind_retry_with_normalised_username = no
>   }
>   # Loaded module rlm_ldap
>   # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap
>   ldap adldap {
>         server = "localhost"
>         identity = "cn=admin,dc=seminary,dc=local"
>         password = <<< secret >>>
>    sasl {
>    }
>    user {
>         scope = "sub"
>         access_positive = yes
>     sasl {
>     }
>    }
>    group {
>         filter = "(objectClass=posixGroup)"
>         scope = "sub"
>         name_attribute = "cn"
>         membership_attribute = "memberOf"
>         cacheable_name = no
>         cacheable_dn = no
>    }
>    client {
>         filter = "(objectClass=radiusClient)"
>         scope = "sub"
>         base_dn = "ou=School,dc=seminary,dc=ad"
>    }
>    profile {
>    }
>    options {
>         ldap_debug = 40
>         chase_referrals = yes
>         rebind = yes
>         net_timeout = 1
>         res_timeout = 10
>         srv_timelimit = 3
>         idle = 60
>         probes = 3
>         interval = 3
>    }
>    tls {
>         start_tls = no
>    }
>   }
> Creating attribute adldap-LDAP-Group
>   # Loaded module rlm_always
>   # Loading module "reject" from file /etc/freeradius/mods-enabled/always
>   always reject {
>         rcode = "reject"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "fail" from file /etc/freeradius/mods-enabled/always
>   always fail {
>         rcode = "fail"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "ok" from file /etc/freeradius/mods-enabled/always
>   always ok {
>         rcode = "ok"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "handled" from file /etc/freeradius/mods-enabled/always
>   always handled {
>         rcode = "handled"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
>   always invalid {
>         rcode = "invalid"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "userlock" from file /etc/freeradius/mods-enabled/
> always
>   always userlock {
>         rcode = "userlock"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "notfound" from file /etc/freeradius/mods-enabled/
> always
>   always notfound {
>         rcode = "notfound"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "noop" from file /etc/freeradius/mods-enabled/always
>   always noop {
>         rcode = "noop"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "updated" from file /etc/freeradius/mods-enabled/always
>   always updated {
>         rcode = "updated"
>         simulcount = 0
>         mpp = no
>   }
>   # Loaded module rlm_soh
>   # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
>   soh {
>         dhcp = yes
>   }
>   # Loaded module rlm_eap
>   # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
>   eap {
>         default_eap_type = "ttls"
>         timer_expire = 60
>         ignore_unknown_eap_types = no
>         cisco_accounting_username_bug = no
>         max_sessions = 16384
>   }
>   # Loaded module rlm_dynamic_clients
>   # Loading module "dynamic_clients" from file
> /etc/freeradius/mods-enabled/dynamic_clients
>   # Loaded module rlm_logintime
>   # Loading module "logintime" from file
> /etc/freeradius/mods-enabled/logintime
>   logintime {
>         minimum_timeout = 60
>   }
>   # Loaded module rlm_exec
>   # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
>   exec {
>         wait = no
>         input_pairs = "request"
>         shell_escape = yes
>         timeout = 10
>   }
>   # Loaded module rlm_realm
>   # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
>   realm IPASS {
>         format = "prefix"
>         delimiter = "/"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
>   realm suffix {
>         format = "suffix"
>         delimiter = "@"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "realmpercent" from file
> /etc/freeradius/mods-enabled/realm
>   realm realmpercent {
>         format = "suffix"
>         delimiter = "%"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
>   realm ntdomain {
>         format = "prefix"
>         delimiter = "\\"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loaded module rlm_utf8
>   # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
>   # Loaded module rlm_date
>   # Loading module "date" from file /etc/freeradius/mods-enabled/date
>   date {
>         format = "%b %e %Y %H:%M:%S %Z"
>         utc = no
>   }
>   # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
>   exec echo {
>         wait = yes
>         program = "/bin/echo %{User-Name}"
>         input_pairs = "request"
>         output_pairs = "reply"
>         shell_escape = yes
>   }
>   # Loaded module rlm_unix
>   # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
>   unix {
>         radwtmp = "/var/log/freeradius/radwtmp"
>   }
> Creating attribute Unix-Group
>   # Loaded module rlm_detail
>   # Loading module "auth_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   detail auth_log {
>         filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "reply_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   detail reply_log {
>         filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   detail pre_proxy_log {
>         filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   detail post_proxy_log {
>         filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loaded module rlm_expr
>   # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
>   expr {
>         safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>   }
>   # Loading module "ntlm_auth" from file
> /etc/freeradius/mods-enabled/ntlm_auth
>   exec ntlm_auth {
>         wait = yes
>         program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
>         shell_escape = yes
>   }
>   # Loaded module rlm_pap
>   # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
>   pap {
>         normalise = yes
>   }
>   # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
>   ldap {
>         server = "localhost"
>         identity = "cn=admin,dc=seminary,dc=local"
>         password = <<< secret >>>
>    sasl {
>    }
>    user {
>         scope = "sub"
>         access_positive = yes
>     sasl {
>     }
>    }
>    group {
>         filter = "(objectClass=posixGroup)"
>         scope = "sub"
>         name_attribute = "cn"
>         membership_attribute = "memberOf"
>         cacheable_name = no
>         cacheable_dn = no
>    }
>    client {
>         filter = "(objectClass=radiusClient)"
>         scope = "sub"
>         base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
>    }
>    profile {
>    }
>    options {
>         ldap_debug = 40
>         chase_referrals = yes
>         rebind = yes
>         net_timeout = 1
>         res_timeout = 10
>         srv_timelimit = 3
>         idle = 60
>         probes = 3
>         interval = 3
>    }
>    tls {
>         start_tls = no
>    }
>   }
> Creating attribute LDAP-Group
>   # Loaded module rlm_digest
>   # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
>   # Loaded module rlm_files
>   # Loading module "files" from file /etc/freeradius/mods-enabled/files
>   files {
>         filename = "/etc/freeradius/mods-config/files/authorize"
>         acctusersfile = "/etc/freeradius/mods-config/files/accounting"
>         preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
>   }
>   # Loaded module rlm_preprocess
>   # Loading module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
>   preprocess {
>         huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
>         hints = "/etc/freeradius/mods-config/preprocess/hints"
>         with_ascend_hack = no
>         ascend_channels_per_line = 23
>         with_ntdomain_hack = no
>         with_specialix_jetstream_hack = no
>         with_cisco_vsa_hack = no
>         with_alvarion_vsa_hack = no
>   }
>   # Loaded module rlm_cache
>   # Loading module "cache_eap" from file
> /etc/freeradius/mods-enabled/cache_eap
>   cache cache_eap {
>         driver = "rlm_cache_rbtree"
>         key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>         ttl = 15
>         max_entries = 0
>         epoch = 0
>         add_stats = no
>   }
>   # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
>   detail {
>         filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loaded module rlm_expiration
>   # Loading module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
>   # Loaded module rlm_chap
>   # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
>   # Loaded module rlm_radutmp
>   # Loading module "sradutmp" from file
> /etc/freeradius/mods-enabled/sradutmp
>   radutmp sradutmp {
>         filename = "/var/log/freeradius/sradutmp"
>         username = "%{User-Name}"
>         case_sensitive = yes
>         check_with_nas = yes
>         permissions = 420
>         caller_id = no
>   }
>   # Loading module "radutmp" from file /etc/freeradius/mods-enabled/
> radutmp
>   radutmp {
>         filename = "/var/log/freeradius/radutmp"
>         username = "%{User-Name}"
>         case_sensitive = yes
>         check_with_nas = yes
>         permissions = 384
>         caller_id = yes
>   }
>   # Loaded module rlm_passwd
>   # Loading module "etc_passwd" from file
> /etc/freeradius/mods-enabled/passwd
>   passwd etc_passwd {
>         filename = "/etc/passwd"
>         format = "*User-Name:Crypt-Password:"
>         delimiter = ":"
>         ignore_nislike = no
>         ignore_empty = yes
>         allow_multiple_keys = no
>         hash_size = 100
>   }
>   # Loaded module rlm_linelog
>   # Loading module "linelog" from file /etc/freeradius/mods-enabled/
> linelog
>   linelog {
>         filename = "/var/log/freeradius/linelog"
>         escape_filenames = no
>         syslog_severity = "info"
>         permissions = 384
>         format = "This is a log message for %{User-Name}"
>         reference = "messages.%{%{reply:Packet-Type}:-default}"
>   }
>   # Loading module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
>   linelog log_accounting {
>         filename = "/var/log/freeradius/linelog-accounting"
>         escape_filenames = no
>         syslog_severity = "info"
>         permissions = 384
>         format = ""
>         reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>   }
>   # Loaded module rlm_unpack
>   # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
>   # Loaded module rlm_attr_filter
>   # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
>   attr_filter attr_filter.post-proxy {
>         filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
>         key = "%{Realm}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
>   attr_filter attr_filter.pre-proxy {
>         filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
>         key = "%{Realm}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
>   attr_filter attr_filter.access_reject {
>         filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
>   attr_filter attr_filter.access_challenge {
>         filename =
> "/etc/freeradius/mods-config/attr_filter/access_challenge"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
>   attr_filter attr_filter.accounting_response {
>         filename =
> "/etc/freeradius/mods-config/attr_filter/accounting_response"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loaded module rlm_replicate
>   # Loading module "replicate" from file
> /etc/freeradius/mods-enabled/replicate
>   instantiate {
>   }
>   # Instantiating module "mschap" from file
> /etc/freeradius/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
>   # Instantiating module "adldap" from file
> /etc/freeradius/mods-enabled/adldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20442
>    accounting {
>         reference = "%{tolower:type.%{Acct-Status-Type}}"
>    }
>    post-auth {
>         reference = "."
>    }
> rlm_ldap (adldap): Initialising connection pool
>    pool {
>         start = 5
>         min = 3
>         max = 32
>         spare = 10
>         uses = 0
>         lifetime = 0
>         cleanup_interval = 30
>         idle_timeout = 60
>         retry_delay = 30
>         spread = no
>    }
> rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
>   # Instantiating module "reject" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "fail" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "ok" from file /etc/freeradius/mods-enabled/
> always
>   # Instantiating module "handled" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "invalid" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "userlock" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "notfound" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "noop" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "updated" from file
> /etc/freeradius/mods-enabled/always
>   # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
>    # Linked to sub-module rlm_eap_md5
>    # Linked to sub-module rlm_eap_leap
>    # Linked to sub-module rlm_eap_gtc
>    gtc {
>         challenge = "Password: "
>         auth_type = "PAP"
>    }
>    # Linked to sub-module rlm_eap_tls
>    tls {
>         tls = "tls-common"
>    }
>    tls-config tls-common {
>         verify_depth = 0
>         ca_path = "/etc/freeradius/certs"
>         pem_file_type = yes
>         private_key_file = "/etc/freeradius/certs/server.pem"
>         certificate_file = "/etc/freeradius/certs/server.pem"
>         ca_file = "/etc/freeradius/certs/ca.pem"
>         private_key_password = <<< secret >>>
>         dh_file = "/etc/freeradius/certs/dh"
>         random_file = "/dev/urandom"
>         fragment_size = 1024
>         include_length = yes
>         auto_chain = yes
>         check_crl = no
>         check_all_crl = no
>         cipher_list = "DEFAULT"
>         ecdh_curve = "prime256v1"
>     cache {
>         enable = yes
>         lifetime = 24
>         max_entries = 255
>     }
>     verify {
>         skip_if_ocsp_ok = no
>     }
>     ocsp {
>         enable = no
>         override_cert_url = yes
>         url = "http://127.0.0.1/ocsp/"
>         use_nonce = yes
>         timeout = 0
>         softfail = no
>     }
>    }
>    # Linked to sub-module rlm_eap_ttls
>    ttls {
>         tls = "tls-common"
>         default_eap_type = "md5"
>         copy_request_to_tunnel = no
>         use_tunneled_reply = yes
>         virtual_server = "inner-tunnel"
>         include_length = yes
>         require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_peap
>    peap {
>         tls = "tls-common"
>         default_eap_type = "mschapv2"
>         copy_request_to_tunnel = no
>         use_tunneled_reply = yes
>         proxy_tunneled_request_as_eap = yes
>         virtual_server = "inner-tunnel"
>         soh = no
>         require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_mschapv2
>    mschapv2 {
>         with_ntdomain_hack = no
>         send_error = no
>    }
>   # Instantiating module "logintime" from file
> /etc/freeradius/mods-enabled/logintime
>   # Instantiating module "IPASS" from file
> /etc/freeradius/mods-enabled/realm
>   # Instantiating module "suffix" from file
> /etc/freeradius/mods-enabled/realm
>   # Instantiating module "realmpercent" from file
> /etc/freeradius/mods-enabled/realm
>   # Instantiating module "ntdomain" from file
> /etc/freeradius/mods-enabled/realm
>   # Instantiating module "auth_log" from file
> /etc/freeradius/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
>   # Instantiating module "reply_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   # Instantiating module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
>   # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
>   # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/
> ldap
>    accounting {
>         reference = "%{tolower:type.%{Acct-Status-Type}}"
>    }
>    post-auth {
>         reference = "."
>    }
> rlm_ldap (ldap): Initialising connection pool
>    pool {
>         start = 5
>         min = 3
>         max = 32
>         spare = 10
>         uses = 0
>         lifetime = 0
>         cleanup_interval = 30
>         idle_timeout = 60
>         retry_delay = 30
>         spread = no
>    }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
>   # Instantiating module "files" from file
> /etc/freeradius/mods-enabled/files
> reading pairlist file /etc/freeradius/mods-config/files/authorize
> reading pairlist file /etc/freeradius/mods-config/files/accounting
> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
>   # Instantiating module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
>   # Instantiating module "cache_eap" from file
> /etc/freeradius/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
>   # Instantiating module "detail" from file
> /etc/freeradius/mods-enabled/detail
>   # Instantiating module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
>   # Instantiating module "etc_passwd" from file
> /etc/freeradius/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>   # Instantiating module "linelog" from file
> /etc/freeradius/mods-enabled/linelog
>   # Instantiating module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
>   # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
>   # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
>   # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/
> attr_filter/access_reject
> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay"       found in filter list for realm "DEFAULT".
> [/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec"  found in filter list for realm
> "DEFAULT".
>   # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/mods-config/attr_filter/access_challenge
>   # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/mods-config/attr_filter/accounting_response
>  } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/radiusd.conf
> } # server
> server inner-tunnel { # from file /etc/freeradius/sites-enabled/
> inner-tunnel
>  # Loading authenticate {...}
>  # Loading authorize {...}
>  # Loading session {...}
>  # Loading post-proxy {...}
>  # Loading post-auth {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> } # server inner-tunnel
> server default { # from file /etc/freeradius/sites-enabled/default
>  # Loading authenticate {...}
>  # Loading authorize {...}
>  # Loading preacct {...}
>  # Loading accounting {...}
>  # Loading post-proxy {...}
>  # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
>         type = "auth"
>         ipaddr = 127.0.0.1
>         port = 18120
> }
> listen {
>         type = "auth"
>         ipaddr = *
>         port = 0
>    limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>    }
> }
> listen {
>         type = "acct"
>         ipaddr = *
>         port = 0
>    limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>    }
> }
> listen {
>         type = "auth"
>         ipv6addr = ::
>         port = 0
>    limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>    }
> }
> listen {
>         type = "acct"
>         ipv6addr = ::
>         port = 0
>    limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>    }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 42347
> Listening on proxy address :: port 36842
> Ready to process requests
>
>
> This is the truncated log when the user abc connects the first time and
> successfully gets VLAN 11:
>
>
> Waking up in 4.2 seconds.
> (36) Received Access-Request Id 134 from 192.168.100.112:43578 to
> 192.168.100.201:1812 length 238
> (36)   User-Name = "abc"
> (36)   NAS-IP-Address = 10.0.152.66
> (36)   NAS-Identifier = "802aa84654f2"
> (36)   NAS-Port = 0
> (36)   Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi"
> (36)   Calling-Station-Id = "08-11-96-10-3E-14"
> (36)   Framed-MTU = 1400
> (36)   NAS-Port-Type = Wireless-802.11
> (36)   Connect-Info = "CONNECT 0Mbps 802.11b"
> (36)   EAP-Message =
> 0x02f3003f1580000000351703030030000000000000000188d6f04ed734
> 63104a8a627456c7e888d8b95d71a34a21aab4724d66d06b041bdd7edbcdd4621d4b
> (36)   State = 0xa61de71ea2eef24e8e3c6f3ed559ee72
> (36)   Message-Authenticator = 0x1b19bc1f2f655c8f332822c15cd5f3a7
> (36) session-state: No cached attributes
> (36) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (36)   authorize {
> (36)     policy filter_username {
> (36)       if (&User-Name) {
> (36)       if (&User-Name)  -> TRUE
> (36)       if (&User-Name)  {
> (36)         if (&User-Name =~ /@[^@]*@/ ) {
> (36)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (36)         if (&User-Name =~ /\.\./ ) {
> (36)         if (&User-Name =~ /\.\./ )  -> FALSE
> (36)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
> (36)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>  -> FALSE
> (36)         if (&User-Name =~ /\.$/)  {
> (36)         if (&User-Name =~ /\.$/)   -> FALSE
> (36)         if (&User-Name =~ /@\./)  {
> (36)         if (&User-Name =~ /@\./)   -> FALSE
> (36)       } # if (&User-Name)  = notfound
> (36)     } # policy filter_username = notfound
> (36)     [preprocess] = ok
> (36)     [chap] = noop
> (36)     [mschap] = noop
> (36) ntdomain: Checking for prefix before "\"
> (36) ntdomain: No '\' in User-Name = "abc", looking up realm NULL
> (36) ntdomain: No such realm "NULL"
> (36)     [ntdomain] = noop
> (36) eap: Peer sent EAP Response (code 2) ID 243 length 63
> (36) eap: Continuing tunnel setup
> (36)     [eap] = ok
> (36)   } # authorize = ok
> (36) Found Auth-Type = eap
> (36) # Executing group from file /etc/freeradius/sites-enabled/default
> (36)   authenticate {
> (36) eap: Expiring EAP session with state 0xa61de71ea2eef24e
> (36) eap: Finished EAP session with state 0xa61de71ea2eef24e
> (36) eap: Previous EAP request found for state 0xa61de71ea2eef24e, released
> from the list
> (36) eap: Peer sent packet with method EAP TTLS (21)
> (36) eap: Calling submodule eap_ttls to process data
> (36) eap_ttls: Authenticate
> (36) eap_ttls: Continuing EAP-TLS
> (36) eap_ttls: Peer indicated complete TLS record size will be 53 bytes
> (36) eap_ttls: Got complete TLS record (53 bytes)
> (36) eap_ttls: [eaptls verify] = length included
> (36) eap_ttls: [eaptls process] = ok
> (36) eap_ttls: Session established.  Proceeding to decode tunneled
> attributes
> (36) eap_ttls: Got tunneled request
> (36) eap_ttls:   User-Name = "abc"
> (36) eap_ttls:   User-Password = "abcd"
> (36) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
> (36) eap_ttls: Sending tunneled request
> (36) Virtual server inner-tunnel received request
> (36)   User-Name = "abc"
> (36)   User-Password = "abcd"
> (36)   FreeRADIUS-Proxied-To = 127.0.0.1
> (36) WARNING: Outer and inner identities are the same.  User privacy is
> compromised.
> (36) server inner-tunnel {
> (36)   # Executing section authorize from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (36)     authorize {
> (36)       policy filter_username {
> (36)         if (&User-Name) {
> (36)         if (&User-Name)  -> TRUE
> (36)         if (&User-Name)  {
> (36)           if (&User-Name =~ /@[^@]*@/ ) {
> (36)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (36)           if (&User-Name =~ /\.\./ ) {
> (36)           if (&User-Name =~ /\.\./ )  -> FALSE
> (36)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> {
> (36)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>  -> FALSE
> (36)           if (&User-Name =~ /\.$/)  {
> (36)           if (&User-Name =~ /\.$/)   -> FALSE
> (36)           if (&User-Name =~ /@\./)  {
> (36)           if (&User-Name =~ /@\./)   -> FALSE
> (36)         } # if (&User-Name)  = notfound
> (36)       } # policy filter_username = notfound
> (36)       [chap] = noop
> (36)       [mschap] = noop
> (36) ntdomain: Checking for prefix before "\"
> (36) ntdomain: No '\' in User-Name = "abc", looking up realm NULL
> (36) ntdomain: No such realm "NULL"
> (36)       [ntdomain] = noop
> (36)       update control {
> (36)         &Proxy-To-Realm := LOCAL
> (36)       } # update control = noop
> (36) eap: No EAP-Message, not doing EAP
> (36)       [eap] = noop
> (36)       [files] = noop
> rlm_ldap (ldap): Reserved connection (1)
> (36) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (36) ldap:    --> (cn=abc)
> (36) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=abc)", scope "sub"
> (36) ldap: Waiting for search result...
> (36) ldap: User object found at DN
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36) ldap: Processing user attributes
> (36) ldap: control:Password-With-Header +=
> '{ssha}dYlL9kdAZTjsDzkBHYg5bEJ6J+w6tm5V4pSR+A=='
> (36) ldap: control:Password-With-Header += 'abcd'
> rlm_ldap (ldap): Released connection (1)
> Need 2 more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (8), 1 of 24 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (36)       [ldap] = updated
> rlm_ldap (adldap): Reserved connection (0)
> (36) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (36) adldap:    --> (cn=abc)
> (36) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
> "(cn=abc)", scope "sub"
> (36) adldap: Waiting for search result...
> (36) adldap: The specified DN wasn't found
> (36) adldap: Search returned no results
> rlm_ldap (adldap): Released connection (0)
> Need 2 more connections to reach 10 spares
> rlm_ldap (adldap): Opening additional connection (8), 1 of 24 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> (36)       [adldap] = notfound
> (36)       [expiration] = noop
> (36)       [logintime] = noop
> (36) pap: Converted: &control:Password-With-Header ->
> &control:SSHA1-Password
> (36) pap: Removing &control:Password-With-Header
> (36) pap: No {...} in Password-With-Header, re-writing to
> Cleartext-Password
> (36) pap: Removing &control:Password-With-Header
> (36) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
> bytes
> (36)       [pap] = updated
> (36)     } # authorize = updated
> (36)   Found Auth-Type = PAP
> (36)   # Executing group from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (36)     Auth-Type PAP {
> (36) pap: Login attempt with password
> (36) pap: Comparing with "known-good" SSHA-Password
> (36) pap: User authenticated successfully
> (36)       [pap] = ok
> (36)     } # Auth-Type PAP = ok
> (36)   # Executing section post-auth from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (36)     post-auth {
> (36) ldap: EXPAND .
> (36) ldap:    --> .
> (36) ldap: EXPAND Authenticated at %S
> (36) ldap:    --> Authenticated at 2017-09-25 17:31:28
> rlm_ldap (ldap): Reserved connection (2)
> (36) ldap: Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36) ldap: Modifying object with DN
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36) ldap: Waiting for modify result...
> rlm_ldap (ldap): Released connection (2)
> (36)       [ldap] = ok
> (36)     } # post-auth = ok
> (36) } # server inner-tunnel
> (36) Virtual server sending reply
> (36) eap_ttls: Got tunneled Access-Accept
> (36) eap_ttls: No information to cache: session caching will be disabled
> for session 2e7aac7106dabc6b230c2e692645fa699f7f7c6d5757c770ea4834020230
> 8f5b
> (36) eap: Sending EAP Success (code 3) ID 243 length 4
> (36) eap: Freeing handler
> (36)     [eap] = ok
> (36)   } # authenticate = ok
> (36) # Executing section post-auth from file
> /etc/freeradius/sites-enabled/default
> (36)   post-auth {
> (36)     update {
> (36)       No attributes updated
> (36)     } # update = noop
> (36)     if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") {
> (36)     Searching for user in group
> "cn=Teachers,ou=School,dc=seminary,dc=ad"
> rlm_ldap (ldap): Reserved connection (3)
> (36)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (36)        --> (cn=abc)
> (36)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=abc)", scope "sub"
> (36)     Waiting for search result...
> (36)     User object found at DN
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     Checking user object's memberOf attributes
> (36)       Performing unfiltered search in
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base"
> (36)       Waiting for search result...
> (36)     Processing memberOf value
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
> rlm_ldap (ldap): Released connection (3)
> (36)     User is not a member of "cn=Teachers,ou=School,dc=seminary,dc=ad"
> (36)     if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad")  ->
> FALSE
> (36)     if (Ldap-Group ==
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") {
> (36)     Searching for user in group
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (4)
> (36)     Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     Checking user object's memberOf attributes
> (36)       Performing unfiltered search in
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base"
> (36)       Waiting for search result...
> (36)     Processing memberOf value
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
> rlm_ldap (ldap): Released connection (4)
> (36)     User is not a member of
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     if (Ldap-Group ==
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
> (36)     if (Ldap-Group ==
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") {
> (36)     Searching for user in group
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (0)
> (36)     Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     Checking user object's memberOf attributes
> (36)       Performing unfiltered search in
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base"
> (36)       Waiting for search result...
> (36)     Processing memberOf value
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
> rlm_ldap (ldap): Released connection (0)
> (36)     User is not a member of
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     if (Ldap-Group ==
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
> (36)     if (Ldap-Group ==
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") {
> (36)     Searching for user in group
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (6)
> (36)     Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     Checking user object's memberOf attributes
> (36)       Performing unfiltered search in
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base"
> (36)       Waiting for search result...
> (36)     Processing memberOf value
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
> (36)     User found in group DN
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local". Comparison between
> membership: dn, check: dn
> rlm_ldap (ldap): Released connection (6)
> (36)     if (Ldap-Group ==
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  -> TRUE
> (36)     if (Ldap-Group ==
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  {
> (36)       update reply {
> (36)         Tunnel-Type = VLAN
> (36)         Tunnel-Medium-Type = IEEE-802
> (36)         Tunnel-Private-Group-ID = "11"
> (36)       } # update reply = noop
> (36)     } # if (Ldap-Group ==
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  = noop
> (36)     if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local")
> {
> (36)     Searching for user in group
> "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (5)
> (36)     Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     Checking user object's memberOf attributes
> (36)       Performing unfiltered search in
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base"
> (36)       Waiting for search result...
> (36)     Processing memberOf value
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
> rlm_ldap (ldap): Released connection (5)
> (36)     User is not a member of
> "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local")
> -> FALSE
> (36)     if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local")
> {
> (36)     Searching for user in group
> "cn=School,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (7)
> (36)     Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     Checking user object's memberOf attributes
> (36)       Performing unfiltered search in
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope "base"
> (36)       Waiting for search result...
> (36)     Processing memberOf value
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
> rlm_ldap (ldap): Released connection (7)
> (36)     User is not a member of
> "cn=School,ou=SeminaryOU,dc=seminary,dc=local"
> (36)     if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local")
> -> FALSE
> (36) ldap: EXPAND .
> (36) ldap:    --> .
> (36) ldap: EXPAND Authenticated at %S
> (36) ldap:    --> Authenticated at 2017-09-25 17:31:28
> rlm_ldap (ldap): Reserved connection (1)
> (36) ldap: Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36) ldap: Modifying object with DN
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (36) ldap: Waiting for modify result...
> rlm_ldap (ldap): Released connection (1)
> (36)     [ldap] = ok
> (36)     [exec] = noop
> (36)     policy remove_reply_message_if_eap {
> (36)       if (&reply:EAP-Message && &reply:Reply-Message) {
> (36)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
> (36)       else {
> (36)         [noop] = noop
> (36)       } # else = noop
> (36)     } # policy remove_reply_message_if_eap = noop
> (36)   } # post-auth = ok
> (36) Sent Access-Accept Id 134 from 192.168.100.201:1812 to
> 192.168.100.112:43578 length 0
> (36)   MS-MPPE-Recv-Key =
> 0x1f09c87d9c6e4761e1e2c4ae95c1773d9eaabb1020e146b71648faef7be7f449
> (36)   MS-MPPE-Send-Key =
> 0xd82966c83116ad0ab06a985ffe7a4a24704fe3bbfc772c8a547f0df9b67cc765
> (36)   EAP-Message = 0x03f30004
> (36)   Message-Authenticator = 0x00000000000000000000000000000000
> (36)   User-Name = "abc"
> (36)   Tunnel-Type = VLAN
> (36)   Tunnel-Medium-Type = IEEE-802
> (36)   Tunnel-Private-Group-Id = "11"
> (36) Finished request
>
>
>
>
>
> This is the truncated log when the same user connects after a reconnect and
> gets assigned to VLAN 999 - the Management VLAN. Therefore logs in on WIFI
> but gets the wrong VLAN. As we can see from connection (19) the tunnel type
> is not set. In this use-case the client kept the same username / password
> and no changes on LDAP.
>
>
>
>
>
> Waking up in 4.9 seconds.
> (18) Received Access-Request Id 143 from 192.168.100.112:43578 to
> 192.168.100.201:1812 length 317
> (18)   User-Name = "anonymous"
> (18)   NAS-IP-Address = 10.0.152.66
> (18)   NAS-Identifier = "802aa84654f2"
> (18)   NAS-Port = 0
> (18)   Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi"
> (18)   Calling-Station-Id = "08-11-96-10-3E-14"
> (18)   Framed-MTU = 1400
> (18)   NAS-Port-Type = Wireless-802.11
> (18)   Connect-Info = "CONNECT 0Mbps 802.11b"
> (18)   EAP-Message =
> 0x023d008815800000007e1603030046100000424104710a87187ad0966f
> 5d5e5c3d6ce78d53bbae9f47d2132bfd8c1ad90ac06d3b0adcb938f04b04
> 3dbb4ba8b4d801278a08f0a62c4c258aaffac8b48b74d7d75f1114030300
> 010116030300280000000000000000c4bd485ef6d1f66b2bed662ec01b7e
> (18)   State = 0x32300c27310d19732351761035e99eb0
> (18)   Message-Authenticator = 0x69f3c1521ed56d5bc94b18cb8f4ddf99
> (18) session-state: No cached attributes
> (18) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (18)   authorize {
> (18)     policy filter_username {
> (18)       if (&User-Name) {
> (18)       if (&User-Name)  -> TRUE
> (18)       if (&User-Name)  {
> (18)         if (&User-Name =~ /@[^@]*@/ ) {
> (18)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (18)         if (&User-Name =~ /\.\./ ) {
> (18)         if (&User-Name =~ /\.\./ )  -> FALSE
> (18)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
> (18)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>  -> FALSE
> (18)         if (&User-Name =~ /\.$/)  {
> (18)         if (&User-Name =~ /\.$/)   -> FALSE
> (18)         if (&User-Name =~ /@\./)  {
> (18)         if (&User-Name =~ /@\./)   -> FALSE
> (18)       } # if (&User-Name)  = notfound
> (18)     } # policy filter_username = notfound
> (18)     [preprocess] = ok
> (18)     [chap] = noop
> (18)     [mschap] = noop
> (18) ntdomain: Checking for prefix before "\"
> (18) ntdomain: No '\' in User-Name = "anonymous", looking up realm NULL
> (18) ntdomain: No such realm "NULL"
> (18)     [ntdomain] = noop
> (18) eap: Peer sent EAP Response (code 2) ID 61 length 136
> (18) eap: Continuing tunnel setup
> (18)     [eap] = ok
> (18)   } # authorize = ok
> (18) Found Auth-Type = eap
> (18) # Executing group from file /etc/freeradius/sites-enabled/default
> (18)   authenticate {
> (18) eap: Expiring EAP session with state 0x32300c27310d1973
> (18) eap: Finished EAP session with state 0x32300c27310d1973
> (18) eap: Previous EAP request found for state 0x32300c27310d1973, released
> from the list
> (18) eap: Peer sent packet with method EAP TTLS (21)
> (18) eap: Calling submodule eap_ttls to process data
> (18) eap_ttls: Authenticate
> (18) eap_ttls: Continuing EAP-TLS
> (18) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
> (18) eap_ttls: Got complete TLS record (126 bytes)
> (18) eap_ttls: [eaptls verify] = length included
> (18) eap_ttls: <<< recv TLS 1.2  [length 0046]
> (18) eap_ttls: TLS_accept: unknown state
> (18) eap_ttls: TLS_accept: unknown state
> (18) eap_ttls: <<< recv TLS 1.2  [length 0001]
> (18) eap_ttls: <<< recv TLS 1.2  [length 0010]
> (18) eap_ttls: TLS_accept: unknown state
> (18) eap_ttls: >>> send TLS 1.2  [length 0001]
> (18) eap_ttls: TLS_accept: unknown state
> (18) eap_ttls: >>> send TLS 1.2  [length 0010]
> (18) eap_ttls: TLS_accept: unknown state
> (18) eap_ttls: TLS_accept: unknown state
> (18) eap_ttls: (other): SSL negotiation finished successfully
> (18) eap_ttls: SSL Connection Established
> (18) eap_ttls: [eaptls process] = handled
> (18) eap: Sending EAP Request (code 1) ID 62 length 61
> (18) eap: EAP session adding &reply:State = 0x32300c27360e1973
> (18)     [eap] = handled
> (18)   } # authenticate = handled
> (18) Using Post-Auth-Type Challenge
> (18) Post-Auth-Type sub-section not found.  Ignoring.
> (18) # Executing group from file /etc/freeradius/sites-enabled/default
> (18) Sent Access-Challenge Id 143 from 192.168.100.201:1812 to
> 192.168.100.112:43578 length 0
> (18)   EAP-Message =
> 0x013e003d1580000000331403030001011603030028dbfdcdef37ce9e1a
> adce85686ae07addc42f3d9c092d0e16c3a4642dd91a524e4467460b3a2250a1
> (18)   Message-Authenticator = 0x00000000000000000000000000000000
> (18)   State = 0x32300c27360e19732351761035e99eb0
> (18) Finished request
> Waking up in 4.9 seconds.
> (19) Received Access-Request Id 144 from 192.168.100.112:43578 to
> 192.168.100.201:1812 length 244
> (19)   User-Name = "anonymous"
> (19)   NAS-IP-Address = 10.0.152.66
> (19)   NAS-Identifier = "802aa84654f2"
> (19)   NAS-Port = 0
> (19)   Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi"
> (19)   Calling-Station-Id = "08-11-96-10-3E-14"
> (19)   Framed-MTU = 1400
> (19)   NAS-Port-Type = Wireless-802.11
> (19)   Connect-Info = "CONNECT 0Mbps 802.11b"
> (19)   EAP-Message =
> 0x023e003f15800000003517030300300000000000000001060642187792
> cdb3f0de5501856533b8fc5debf7959ad05fcfb6449203cee53da4ff81706b43b737
> (19)   State = 0x32300c27360e19732351761035e99eb0
> (19)   Message-Authenticator = 0xeca8e7189603fd44a43d98f7725965ba
> (19) session-state: No cached attributes
> (19) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (19)   authorize {
> (19)     policy filter_username {
> (19)       if (&User-Name) {
> (19)       if (&User-Name)  -> TRUE
> (19)       if (&User-Name)  {
> (19)         if (&User-Name =~ /@[^@]*@/ ) {
> (19)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (19)         if (&User-Name =~ /\.\./ ) {
> (19)         if (&User-Name =~ /\.\./ )  -> FALSE
> (19)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
> (19)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>  -> FALSE
> (19)         if (&User-Name =~ /\.$/)  {
> (19)         if (&User-Name =~ /\.$/)   -> FALSE
> (19)         if (&User-Name =~ /@\./)  {
> (19)         if (&User-Name =~ /@\./)   -> FALSE
> (19)       } # if (&User-Name)  = notfound
> (19)     } # policy filter_username = notfound
> (19)     [preprocess] = ok
> (19)     [chap] = noop
> (19)     [mschap] = noop
> (19) ntdomain: Checking for prefix before "\"
> (19) ntdomain: No '\' in User-Name = "anonymous", looking up realm NULL
> (19) ntdomain: No such realm "NULL"
> (19)     [ntdomain] = noop
> (19) eap: Peer sent EAP Response (code 2) ID 62 length 63
> (19) eap: Continuing tunnel setup
> (19)     [eap] = ok
> (19)   } # authorize = ok
> (19) Found Auth-Type = eap
> (19) # Executing group from file /etc/freeradius/sites-enabled/default
> (19)   authenticate {
> (19) eap: Expiring EAP session with state 0x32300c27360e1973
> (19) eap: Finished EAP session with state 0x32300c27360e1973
> (19) eap: Previous EAP request found for state 0x32300c27360e1973, released
> from the list
> (19) eap: Peer sent packet with method EAP TTLS (21)
> (19) eap: Calling submodule eap_ttls to process data
> (19) eap_ttls: Authenticate
> (19) eap_ttls: Continuing EAP-TLS
> (19) eap_ttls: Peer indicated complete TLS record size will be 53 bytes
> (19) eap_ttls: Got complete TLS record (53 bytes)
> (19) eap_ttls: [eaptls verify] = length included
> (19) eap_ttls: [eaptls process] = ok
> (19) eap_ttls: Session established.  Proceeding to decode tunneled
> attributes
> (19) eap_ttls: Got tunneled request
> (19) eap_ttls:   User-Name = "abc"
> (19) eap_ttls:   User-Password = "abcd"
> (19) eap_ttls:   FreeRADIUS-Proxied-To = 127.0.0.1
> (19) eap_ttls: Sending tunneled request
> (19) Virtual server inner-tunnel received request
> (19)   User-Name = "abc"
> (19)   User-Password = "abcd"
> (19)   FreeRADIUS-Proxied-To = 127.0.0.1
> (19) server inner-tunnel {
> (19)   # Executing section authorize from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (19)     authorize {
> (19)       policy filter_username {
> (19)         if (&User-Name) {
> (19)         if (&User-Name)  -> TRUE
> (19)         if (&User-Name)  {
> (19)           if (&User-Name =~ /@[^@]*@/ ) {
> (19)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (19)           if (&User-Name =~ /\.\./ ) {
> (19)           if (&User-Name =~ /\.\./ )  -> FALSE
> (19)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> {
> (19)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>  -> FALSE
> (19)           if (&User-Name =~ /\.$/)  {
> (19)           if (&User-Name =~ /\.$/)   -> FALSE
> (19)           if (&User-Name =~ /@\./)  {
> (19)           if (&User-Name =~ /@\./)   -> FALSE
> (19)         } # if (&User-Name)  = notfound
> (19)       } # policy filter_username = notfound
> (19)       [chap] = noop
> (19)       [mschap] = noop
> (19) ntdomain: Checking for prefix before "\"
> (19) ntdomain: No '\' in User-Name = "abc", looking up realm NULL
> (19) ntdomain: No such realm "NULL"
> (19)       [ntdomain] = noop
> (19)       update control {
> (19)         &Proxy-To-Realm := LOCAL
> (19)       } # update control = noop
> (19) eap: No EAP-Message, not doing EAP
> (19)       [eap] = noop
> (19)       [files] = noop
> rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 79
> seconds
> rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 79
> seconds
> rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 79
> seconds
> rlm_ldap (ldap): Closing connection (5): Hit idle_timeout, was idle for 79
> seconds
> rlm_ldap (ldap): You probably need to lower "min"
> rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 79
> seconds
> rlm_ldap (ldap): You probably need to lower "min"
> rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 79
> seconds
> rlm_ldap (ldap): You probably need to lower "min"
> rlm_ldap (ldap): 0 of 0 connections in use.  You  may need to increase
> "spare"
> rlm_ldap (ldap): Opening additional connection (6), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Reserved connection (6)
> (19) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19) ldap:    --> (cn=abc)
> (19) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=abc)", scope "sub"
> (19) ldap: Waiting for search result...
> (19) ldap: User object found at DN
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (19) ldap: Processing user attributes
> (19) ldap: control:Password-With-Header +=
> '{ssha}dYlL9kdAZTjsDzkBHYg5bEJ6J+w6tm5V4pSR+A=='
> (19) ldap: control:Password-With-Header += 'abcd'
> rlm_ldap (ldap): Released connection (6)
> Need 2 more connections to reach min connections (3)
> rlm_ldap (ldap): Opening additional connection (7), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://localhost:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (19)       [ldap] = updated
> rlm_ldap (adldap): Closing connection (1): Hit idle_timeout, was idle for
> 85 seconds
> rlm_ldap (adldap): Closing connection (2): Hit idle_timeout, was idle for
> 85 seconds
> rlm_ldap (adldap): Closing connection (3): Hit idle_timeout, was idle for
> 85 seconds
> rlm_ldap (adldap): Closing connection (4): Hit idle_timeout, was idle for
> 85 seconds
> rlm_ldap (adldap): You probably need to lower "min"
> rlm_ldap (adldap): Closing connection (0): Hit idle_timeout, was idle for
> 79 seconds
> rlm_ldap (adldap): You probably need to lower "min"
> rlm_ldap (adldap): Closing connection (5): Hit idle_timeout, was idle for
> 79 seconds
> rlm_ldap (adldap): You probably need to lower "min"
> rlm_ldap (adldap): 0 of 0 connections in use.  You  may need to increase
> "spare"
> rlm_ldap (adldap): Opening additional connection (6), 1 of 32 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> rlm_ldap (adldap): Reserved connection (6)
> (19) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19) adldap:    --> (cn=abc)
> (19) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
> "(cn=abc)", scope "sub"
> (19) adldap: Waiting for search result...
> (19) adldap: The specified DN wasn't found
> (19) adldap: Search returned no results
> rlm_ldap (adldap): Released connection (6)
> Need 2 more connections to reach min connections (3)
> rlm_ldap (adldap): Opening additional connection (7), 1 of 31 pending slots
> used
> rlm_ldap (adldap): Connecting to ldap://localhost:389
> rlm_ldap (adldap): Waiting for bind result...
> rlm_ldap (adldap): Bind successful
> (19)       [adldap] = notfound
> (19)       [expiration] = noop
> (19)       [logintime] = noop
> (19) pap: Converted: &control:Password-With-Header ->
> &control:SSHA1-Password
> (19) pap: Removing &control:Password-With-Header
> (19) pap: No {...} in Password-With-Header, re-writing to
> Cleartext-Password
> (19) pap: Removing &control:Password-With-Header
> (19) pap: Normalizing SSHA1-Password from base64 encoding, 40 bytes -> 28
> bytes
> (19)       [pap] = updated
> (19)     } # authorize = updated
> (19)   Found Auth-Type = PAP
> (19)   # Executing group from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (19)     Auth-Type PAP {
> (19) pap: Login attempt with password
> (19) pap: Comparing with "known-good" SSHA-Password
> (19) pap: User authenticated successfully
> (19)       [pap] = ok
> (19)     } # Auth-Type PAP = ok
> (19)   # Executing section post-auth from file
> /etc/freeradius/sites-enabled/inner-tunnel
> (19)     post-auth {
> (19) ldap: EXPAND .
> (19) ldap:    --> .
> (19) ldap: EXPAND Authenticated at %S
> (19) ldap:    --> Authenticated at 2017-09-25 17:52:13
> rlm_ldap (ldap): Reserved connection (6)
> (19) ldap: Using user DN from request
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (19) ldap: Modifying object with DN
> "cn=abc,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> (19) ldap: Waiting for modify result...
> rlm_ldap (ldap): Released connection (6)
> (19)       [ldap] = ok
> (19)     } # post-auth = ok
> (19) } # server inner-tunnel
> (19) Virtual server sending reply
> (19) eap_ttls: Got tunneled Access-Accept
> (19) eap_ttls: No information to cache: session caching will be disabled
> for session 1dac6be6ca1af46bc44f3748a84b6104a0601b5510eb0a63af149eeda17d
> d6ee
> (19) eap: Sending EAP Success (code 3) ID 62 length 4
> (19) eap: Freeing handler
> (19)     [eap] = ok
> (19)   } # authenticate = ok
> (19) # Executing section post-auth from file
> /etc/freeradius/sites-enabled/default
> (19)   post-auth {
> (19)     update {
> (19)       No attributes updated
> (19)     } # update = noop
> (19)     if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") {
> (19)     Searching for user in group
> "cn=Teachers,ou=School,dc=seminary,dc=ad"
> rlm_ldap (ldap): Reserved connection (7)
> (19)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19)        --> (cn=anonymous)
> (19)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19)     Waiting for search result...
> (19)     Search returned no results
> rlm_ldap (ldap): Released connection (7)
> (19)     if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad")  ->
> FALSE
> (19)     if (Ldap-Group ==
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") {
> (19)     Searching for user in group
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (6)
> (19)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19)        --> (cn=anonymous)
> (19)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19)     Waiting for search result...
> (19)     Search returned no results
> rlm_ldap (ldap): Released connection (6)
> (19)     if (Ldap-Group ==
> "cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
> (19)     if (Ldap-Group ==
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") {
> (19)     Searching for user in group
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (7)
> (19)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19)        --> (cn=anonymous)
> (19)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19)     Waiting for search result...
> (19)     Search returned no results
> rlm_ldap (ldap): Released connection (7)
> (19)     if (Ldap-Group ==
> "cn=Formators,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
> (19)     if (Ldap-Group ==
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") {
> (19)     Searching for user in group
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (6)
> (19)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19)        --> (cn=anonymous)
> (19)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19)     Waiting for search result...
> (19)     Search returned no results
> rlm_ldap (ldap): Released connection (6)
> (19)     if (Ldap-Group ==
> "cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
> (19)     if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local")
> {
> (19)     Searching for user in group
> "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (7)
> (19)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19)        --> (cn=anonymous)
> (19)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19)     Waiting for search result...
> (19)     Search returned no results
> rlm_ldap (ldap): Released connection (7)
> (19)     if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local")
> -> FALSE
> (19)     if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local")
> {
> (19)     Searching for user in group
> "cn=School,ou=SeminaryOU,dc=seminary,dc=local"
> rlm_ldap (ldap): Reserved connection (6)
> (19)     EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19)        --> (cn=anonymous)
> (19)     Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19)     Waiting for search result...
> (19)     Search returned no results
> rlm_ldap (ldap): Released connection (6)
> (19)     if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local")
> -> FALSE
> (19) ldap: EXPAND .
> (19) ldap:    --> .
> (19) ldap: EXPAND Authenticated at %S
> (19) ldap:    --> Authenticated at 2017-09-25 17:52:13
> rlm_ldap (ldap): Reserved connection (7)
> (19) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
> (19) ldap:    --> (cn=anonymous)
> (19) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
> filter "(cn=anonymous)", scope "sub"
> (19) ldap: Waiting for search result...
> (19) ldap: Search returned no results
> rlm_ldap (ldap): Released connection (7)
> (19)     [ldap] = notfound
> (19)     [exec] = noop
> (19)     policy remove_reply_message_if_eap {
> (19)       if (&reply:EAP-Message && &reply:Reply-Message) {
> (19)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
> (19)       else {
> (19)         [noop] = noop
> (19)       } # else = noop
> (19)     } # policy remove_reply_message_if_eap = noop
> (19)   } # post-auth = noop
> (19) Sent Access-Accept Id 144 from 192.168.100.201:1812 to
> 192.168.100.112:43578 length 0
> (19)   MS-MPPE-Recv-Key =
> 0x40963a36a135d38efb10148c7225778c288e43da41239068e4146d3b7e0a946c
> (19)   MS-MPPE-Send-Key =
> 0x33dd7f57fe7c5470834d905818cec7823642197b95259e1745cda1f55e34dd46
> (19)   EAP-Message = 0x033e0004
> (19)   Message-Authenticator = 0x00000000000000000000000000000000
> (19)   User-Name = "anonymous"
> (19) Finished request
> Waking up in 4.8 seconds.
> (20) Received Accounting-Request Id 145 from 192.168.100.112:52973 to
> 192.168.100.201:1813 length 174
> (20)   Acct-Session-Id = "00000014-000000AC"
> (20)   Acct-Status-Type = Start
> (20)   Acct-Authentic = RADIUS
> (20)   User-Name = "anonymous"
> (20)   NAS-IP-Address = 10.0.152.66
> (20)   Framed-IP-Address = 192.168.100.36
> (20)   NAS-Identifier = "802aa84654f2"
> (20)   NAS-Port = 0
> (20)   Called-Station-Id = "80-2A-A8-47-54-F2:SeminaryWiFi"
> (20)   Calling-Station-Id = "08-11-96-10-3E-14"
> (20)   NAS-Port-Type = Wireless-802.11
> (20)   Connect-Info = "CONNECT 0Mbps 802.11b"
> (20) # Executing section preacct from file
> /etc/freeradius/sites-enabled/default
> (20)   preacct {
> (20)     [preprocess] = ok
> (20)     policy acct_unique {
> (20)       update request {
> (20)         &Tmp-String-9 := "ai:"
> (20)       } # update request = noop
> (20)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
> (20)       EXPAND %{hex:&Class}
> (20)          -->
> (20)       EXPAND ^%{hex:&Tmp-String-9}
> (20)          --> ^61693a
> (20)       if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i))  -> FALSE
> (20)       else {
> (20)         update request {
> (20)           EXPAND
> %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-
> Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
> (20)              --> 67530be64cc372a97fd64798e1f546c0
> (20)           &Acct-Unique-Session-Id := 67530be64cc372a97fd64798e1f546c0
> (20)         } # update request = noop
> (20)       } # else = noop
> (20)     } # policy acct_unique = noop
> (20) suffix: Checking for suffix after "@"
> (20) suffix: No '@' in User-Name = "anonymous", looking up realm NULL
> (20) suffix: No such realm "NULL"
> (20)     [suffix] = noop
> (20)     [files] = noop
> (20)   } # preacct = ok
> (20) # Executing section accounting from file
> /etc/freeradius/sites-enabled/default
> (20)   accounting {
> (20) detail: EXPAND
> /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/detail-%Y%m%d
> (20) detail:    --> /var/log/freeradius/radacct/
> 192.168.100.112/detail-20170925
> (20) detail:
> /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> Packet-Src-IPv6-Address}}/detail-%Y%m%d
> expands to /var/log/freeradius/radacct/192.168.100.112/detail-20170925
> (20) detail: EXPAND %t
> (20) detail:    --> Mon Sep 25 17:52:13 2017
> (20)     [detail] = ok
> (20)     [unix] = ok
> (20)     [exec] = noop
> (20) attr_filter.accounting_response: EXPAND %{User-Name}
> (20) attr_filter.accounting_response:    --> anonymous
> (20) attr_filter.accounting_response: Matched entry DEFAULT at line 12
> (20)     [attr_filter.accounting_response] = updated
> (20)   } # accounting = updated
> (20) Sent Accounting-Response Id 145 from 192.168.100.201:1813 to
> 192.168.100.112:52973 length 0
> (20) Finished request
> (20) Cleaning up request packet ID 145 with timestamp +85
> Waking up in 4.8 seconds.
>
>
> Many thanks on your help and support.
>
> Best regards
>
>
> Matthew
>
>
>
>
> Matthew Pulis
> mobile / WhatsApp:   +356 79539404
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/
> list/users.html


More information about the Freeradius-Users mailing list