Google authenticator : Access-Reject

[Eero Volotinen]

You need to enable pam logging on google authenticator.

what is content of /etc/pam.d/radiusd ?

Eero

ti 24. huhtik. 2018 klo 17.29 <servernemesis at tutanota.com> kirjoitti:

> Thanks, it looks better but it's still failing :
>
> Ready to process requests
> (0) Received Access-Request Id 113 from 127.0.0.1:34793 to 127.0.0.1:1812
> length 92
> (0)   User-Name = "user at mydomain.com <mailto:user at mydomain.com>"
> (0)   User-Password = "password123456"
> (0)   NAS-IP-Address = 127.0.1.1
> (0)   NAS-Port = 18120
> (0)   Message-Authenticator = 0xd028fefb31c1de33ebec1d53011953ce
> (0) # Executing section authorize from file
> /etc/freeradius/3.0/sites-enabled/default
> (0)   authorize {
> (0)     policy filter_username {
> (0)       if (&User-Name) {
> (0)       if (&User-Name)  -> TRUE
> (0)       if (&User-Name)  {
> (0)         if (&User-Name =~ / /) {
> (0)         if (&User-Name =~ / /)  -> FALSE
> (0)         if (&User-Name =~ /@[^@]*@/ ) {
> (0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (0)         if (&User-Name =~ /\.\./ ) {
> (0)         if (&User-Name =~ /\.\./ )  -> FALSE
> (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
> (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (0)         if (&User-Name =~ /\.$/)  {
> (0)         if (&User-Name =~ /\.$/)   -> FALSE
> (0)         if (&User-Name =~ /@\./)  {
> (0)         if (&User-Name =~ /@\./)   -> FALSE
> (0)       } # if (&User-Name)  = notfound
> (0)     } # policy filter_username = notfound
> (0)     [preprocess] = ok
> (0)     [chap] = noop
> (0)     [mschap] = noop
> (0)     [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: Looking up realm "mydomain.com" for User-Name = "
> user at mydomain.com <mailto:user at mydomain.com>"
> (0) suffix: Found realm "mydomain.com"
> (0) suffix: Adding Stripped-User-Name = "user"
> (0) suffix: Adding Realm = "mydomain.com"
> (0) suffix: Authentication realm is LOCAL
> (0)     [suffix] = ok
> (0) eap: No EAP-Message, not doing EAP
> (0)     [eap] = noop
> (0) files: users: Matched entry DEFAULT at line 221
> (0)     [files] = ok
> (0)     [expiration] = noop
> (0)     [logintime] = noop
> (0) pap: WARNING: No "known good" password found for the user.  Not
> setting Auth-Type
> (0) pap: WARNING: Authentication will fail unless a "known good" password
> is available
> (0)     [pap] = noop
> (0)   } # authorize = ok
> (0) Found Auth-Type = pam
> (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (0)   authenticate {
> (0) pam: Using pamauth string "radiusd" for pam.conf lookup
> (0) pam: ERROR: pam_authenticate failed: Authentication failure
> (0)     [pam] = reject
> (0)   } # authenticate = reject
> (0) Failed to authenticate the user
> (0) Using Post-Auth-Type Reject
> (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (0)   Post-Auth-Type REJECT {
> (0) attr_filter.access_reject: EXPAND %{User-Name}
> (0) attr_filter.access_reject:    --> user at mydomain.com <mailto:
> user at mydomain.com>
> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (0)     [attr_filter.access_reject] = updated
> (0)     [eap] = noop
> (0)     policy remove_reply_message_if_eap {
> (0)       if (&reply:EAP-Message && &reply:Reply-Message) {
> (0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
> (0)       else {
> (0)         [noop] = noop
> (0)       } # else = noop
> (0)     } # policy remove_reply_message_if_eap = noop
> (0)   } # Post-Auth-Type REJECT = updated
> (0) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (0) Sending delayed response
> (0) Sent Access-Reject Id 113 from 127.0.0.1:1812 to 127.0.0.1:34793
> length 20
> Waking up in 3.9 seconds.
> (0) Cleaning up request packet ID 113 with timestamp +11
> Ready to process requests
>
>
> 24. Avr 2018 16:40 de aland at deployingradius.com <mailto:
> aland at deployingradius.com>:
>
>
> > On Apr 24, 2018, at 10:23 AM, <> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>> > <> servernemesis at tutanota.com <mailto:
> servernemesis at tutanota.com>> > wrote:
> >>
> >> My FR server is domain joined, and his krb5 realm is mydomain.com
> >> I don't know where I could specify the domain for PAM.
> >
> >   I didn't tell you to specify the domain for PAM.
> >
> >> I'm not sure what you mean by "If it doesn't know about the domain,
> then add a realm for "mydomain.com".  Make it LOCAL (see proxy.conf)."
> >> Should I edit the /etc/pam.d/radiusd ? What's proxy.conf ?
> >
> >   You know you're on the FreeRADIUS mailing list, right?  proxy.conf is
> for FreeRADIUS, not PAM.
> >
> >   No, don't edit the /etc/pam.d/radiusd file.  If I had meant to edit
> that file, I would have told you to edit that file.
> >
> >   Look in the /etc/raddb (or on debian / Ubuntu) /etc/freeradius
> directory.  The proxy.conf file is there.  Read it.
> >
> >   Alan DeKok.
> >
> >
> > -
> > List info/subscribe/unsubscribe? See >
> http://www.freeradius.org/list/users.html <
> http://www.freeradius.org/list/users.html>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html