CHAP faliled authenticate from users file

Marcin marcin at nicram.net
Wed Feb 14 17:17:15 CET 2018


Hello,
I'm trying to make redundant authentication if database fails to get users
from files.

authorize {

filter_username
preprocess
chap
mschap
suffix
eap {
ok = return
}

if (Service-Type == Login-User){
                files
        }
if (Framed-Protocol == PPP){
redundant {
lms
files
}
        }
expiration
logintime
pap
}

With this, when I try to connect and database is well everything goes well
and user is authentificated.
But when I simulate problems with database (shutdown db) user cannot
connect.

in users file:
serwis Cleartext-Password := "password"
Framed-IP-Address = 1.1.1.1,
Framed-IP-Netmask = 255.255.255.255,
MS-Primary-DNS-Server = 8.8.4.4,
MS-Secondary-DNS-Server = 8.8.8.8,
Port-Limit = 1,
Acct-Interim-Interval = 300,
Filter-ID = "105192k/11196k",
Mikrotik-Rate-Limit = "11196k/105192k"

now the log:

radiusd -X
FreeRADIUS Version 3.0.12
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/lineloglms
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/lms
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/lms
main {
 security {
  user = "freerad"
  group = "freerad"
  allow_core_dumps = no
 }
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = no
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
  max_attributes = 200
  reject_delay = 1.000000
  status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20.000000
  response_timeouts = 1
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  check_timeout = 4
  num_answers_to_alive = 3
  revive_interval = 120
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localhost_ipv6 {
  ipv6addr = ::1
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client localNas {
  ipaddr = 10.5.5.0/16
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
 client local2Nas {
  ipaddr = 10.10.1.0/16
  require_message_authenticator = no
  secret = <<< secret >>>
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
  # Loaded module rlm_linelog
  # Loading module "lineloglms" from file
/etc/freeradius/3.0/mods-enabled/lineloglms
  linelog lineloglms {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "%T This is a log message for %{User-Name}"
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/freeradius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_unpack
  # Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  # Loaded module rlm_always
  # Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_mschap
  # Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  filename = "/var/log/freeradius/linelog"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/freeradius/linelog-accounting"
  escape_filenames = no
  syslog_severity = "info"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_detail
  # Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  cisco_accounting_username_bug = no
  max_sessions = 16384
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
  # Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/freeradius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  driver = "rlm_cache_rbtree"
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 0
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
  # Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  detail {
  filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  escape_filenames = no
  log_packet_header = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_sql
  # Loading module "lms" from file /etc/freeradius/3.0/mods-enabled/lms
  sql lms {
  driver = "rlm_sql_mysql"
  server = "localhost"
  port = 3306
  login = "radius"
  password = <<< secret >>>
  radius_db = "lms"
  read_groups = yes
  read_profiles = yes
  read_clients = no
  delete_stale_sessions = yes
  sql_user_name = "%{User-Name}"
  default_user_profile = ""
  client_query = "SELECT id, nasname, shortname, type, secret, server FROM
nas"
  authorize_check_query = "...."
  authorize_reply_query = "...."
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   accounting {
    reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
     }
     accounting-off {
     }
     start {
     }
     interim-update {
     }
     stop {
      query = "UPDATE nodes SET lastonline = unix_timestamp() WHERE
name='%{User-Name}'"
     }
    }
   }
   post-auth {
    reference = ".query"
    query = "UPDATE nodes SET lastonline = unix_timestamp() WHERE
name='%{User-Name}'"
   }
  }
rlm_sql (lms): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
  instantiate {
  }
  # Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "lineloglms" from file
/etc/freeradius/3.0/mods-enabled/lineloglms
  # Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    verify_depth = 0
    ca_path = "/etc/freeradius/3.0/certs"
    pem_file_type = yes
    private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
    certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
    ca_file = "/etc/ssl/certs/ca-certificates.crt"
    private_key_password = <<< secret >>>
    dh_file = "/etc/freeradius/3.0/certs/dh"
    fragment_size = 1024
    include_length = yes
    auto_chain = yes
    check_crl = no
    check_all_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    skip_if_ocsp_ok = no
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "lms" from file
/etc/freeradius/3.0/mods-enabled/lms
rlm_sql_mysql: libmysql version: 10.1.26-MariaDB
   mysql {
    tls {
    }
    warnings = "auto"
   }
rlm_sql (lms): Attempting to connect to database "lms"
rlm_sql (lms): Initialising connection pool
   pool {
    start = 0
    min = 3
    max = 32
    spare = 10
    uses = 0
    lifetime = 0
    cleanup_interval = 30
    idle_timeout = 60
    retry_delay = 30
    spread = no
   }
  # Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/radius_users
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/lms
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 100
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipv6addr = ::
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Ready to process requests
(0) Received Access-Request Id 11 from 10.5.5.10:40267 to 10.5.5.1:1812
length 153
(0)   Service-Type = Framed-User
(0)   Framed-Protocol = PPP
(0)   NAS-Port = 15728920
(0)   NAS-Port-Type = Ethernet
(0)   User-Name = "serwis"
(0)   Calling-Station-Id = "00:0C:42:79:DC:8E"
(0)   Called-Station-Id = "pppoe-server"
(0)   NAS-Port-Id = "pppoe_br"
(0)   CHAP-Challenge = 0xc87cea176b46a73b1cf190c880397b23
(0)   CHAP-Password = 0x01ca42fce452d8fb68862851d755236a05
(0)   NAS-Identifier = "PPPoE_MT_Test"
(0)   NAS-IP-Address = 10.5.5.10
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/lms
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "serwis", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     if (Service-Type == Login-User){
(0)     if (Service-Type == Login-User) -> FALSE
(0)     if (Framed-Protocol == PPP){
(0)     if (Framed-Protocol == PPP) -> TRUE
(0)     if (Framed-Protocol == PPP) {
(0)       redundant {
(0) lms: EXPAND %{User-Name}
(0) lms:    --> serwis
(0) lms: SQL-User-Name set to 'serwis'
rlm_sql (lms): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (lms): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Couldn't connect to MySQL server radius at localhost:lms
rlm_sql_mysql: MySQL error: Can't connect to local MySQL server through
socket '/var/run/mysqld/mysqld.sock' (2 "No such file or directory")
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (lms): Opening connection failed (0)
*(0)         [lms] = fail*
*(0) files: users: Matched entry DEFAULT at line 186*
*(0)         [files] = ok*
*(0)       } # redundant = ok*
*(0)     } # if (Framed-Protocol == PPP) = ok*
*(0)     [expiration] = noop*
*(0)     [logintime] = noop*
*(0) pap: WARNING: No "known good" password found for the user.  Not
setting Auth-Type*
*(0) pap: WARNING: Authentication will fail unless a "known good" password
is available*
*(0)     [pap] = noop*
*(0)   } # authorize = ok*
*(0) Found Auth-Type = CHAP*
*(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms*
*(0)   Auth-Type CHAP {*
*(0) chap: ERROR: &control:Cleartext-Password is required for
authentication*
*(0)     [chap] = fail*
*(0)   } # Auth-Type CHAP = fail*
*(0) Failed to authenticate the user*
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> serwis
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.6 seconds.
Waking up in 0.3 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 11 from 10.5.5.1:1812 to 10.5.5.10:40267 length 20
Waking up in 3.9 seconds.
(1) Received Access-Request Id 12 from 10.5.5.10:35043 to 10.5.5.1:1812
length 153
(1)   Service-Type = Framed-User
(1)   Framed-Protocol = PPP
(1)   NAS-Port = 15728921
(1)   NAS-Port-Type = Ethernet
(1)   User-Name = "serwis"
(1)   Calling-Station-Id = "00:0C:42:79:DC:8E"
(1)   Called-Station-Id = "pppoe-server"
(1)   NAS-Port-Id = "pppoe_br"
(1)   CHAP-Challenge = 0x1ba6c67c6087767d213ef90b566452fd
(1)   CHAP-Password = 0x01b5934a859ef0cd8a1a5c445f63c93785
(1)   NAS-Identifier = "PPPoE_MT_Test"
(1)   NAS-IP-Address = 10.5.5.10
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/lms
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1) chap:   &control:Auth-Type := CHAP
(1)     [chap] = ok
(1)     [mschap] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "serwis", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1)     [eap] = noop
(1)     if (Service-Type == Login-User){
(1)     if (Service-Type == Login-User) -> FALSE
(1)     if (Framed-Protocol == PPP){
(1)     if (Framed-Protocol == PPP) -> TRUE
(1)     if (Framed-Protocol == PPP) {
(1)       redundant {
(1) lms: EXPAND %{User-Name}
(1) lms:    --> serwis
(1) lms: SQL-User-Name set to 'serwis'
rlm_sql (lms): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (lms): Last connection attempt failed, waiting 30 seconds before
retrying
(1)         [lms] = fail
(1) files: users: Matched entry DEFAULT at line 186
(1)         [files] = ok
(1)       } # redundant = ok
(1)     } # if (Framed-Protocol == PPP) = ok
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user.  Not setting
Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password
is available
(1)     [pap] = noop
(1)   } # authorize = ok
(1) Found Auth-Type = CHAP
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(1)   Auth-Type CHAP {
(1) chap: ERROR: &control:Cleartext-Password is required for authentication
(1)     [chap] = fail
(1)   } # Auth-Type CHAP = fail
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(1)   Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject:    --> serwis
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1)     [attr_filter.access_reject] = updated
(1)     [eap] = noop
(1)     policy remove_reply_message_if_eap {
(1)       if (&reply:EAP-Message && &reply:Reply-Message) {
(1)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(1)       else {
(1)         [noop] = noop
(1)       } # else = noop
(1)     } # policy remove_reply_message_if_eap = noop
(1)   } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.6 seconds.
Waking up in 0.3 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 12 from 10.5.5.1:1812 to 10.5.5.10:35043 length 20
Waking up in 2.6 seconds.
(2) Received Access-Request Id 13 from 10.5.5.10:33994 to 10.5.5.1:1812
length 153
(2)   Service-Type = Framed-User
(2)   Framed-Protocol = PPP
(2)   NAS-Port = 15728922
(2)   NAS-Port-Type = Ethernet
(2)   User-Name = "serwis"
(2)   Calling-Station-Id = "00:0C:42:79:DC:8E"
(2)   Called-Station-Id = "pppoe-server"
(2)   NAS-Port-Id = "pppoe_br"
(2)   CHAP-Challenge = 0x69b1921ba616decda1f9736776d3efec
(2)   CHAP-Password = 0x01b99a2b00d635f01a5de5e230a3d70d89
(2)   NAS-Identifier = "PPPoE_MT_Test"
(2)   NAS-IP-Address = 10.5.5.10
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/lms
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2) chap:   &control:Auth-Type := CHAP
(2)     [chap] = ok
(2)     [mschap] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "serwis", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: No EAP-Message, not doing EAP
(2)     [eap] = noop
(2)     if (Service-Type == Login-User){
(2)     if (Service-Type == Login-User) -> FALSE
(2)     if (Framed-Protocol == PPP){
(2)     if (Framed-Protocol == PPP) -> TRUE
(2)     if (Framed-Protocol == PPP) {
(2)       redundant {
(2) lms: EXPAND %{User-Name}
(2) lms:    --> serwis
(2) lms: SQL-User-Name set to 'serwis'
rlm_sql (lms): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (lms): Last connection attempt failed, waiting 30 seconds before
retrying
(2)         [lms] = fail
(2) files: users: Matched entry DEFAULT at line 186
(2)         [files] = ok
(2)       } # redundant = ok
(2)     } # if (Framed-Protocol == PPP) = ok
(2)     [expiration] = noop
(2)     [logintime] = noop
(2) pap: WARNING: No "known good" password found for the user.  Not setting
Auth-Type
(2) pap: WARNING: Authentication will fail unless a "known good" password
is available
(2)     [pap] = noop
(2)   } # authorize = ok
(2) Found Auth-Type = CHAP
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(2)   Auth-Type CHAP {
(2) chap: ERROR: &control:Cleartext-Password is required for authentication
(2)     [chap] = fail
(2)   } # Auth-Type CHAP = fail
(2) Failed to authenticate the user
(2) Using Post-Auth-Type Reject
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(2)   Post-Auth-Type REJECT {
(2) attr_filter.access_reject: EXPAND %{User-Name}
(2) attr_filter.access_reject:    --> serwis
(2) attr_filter.access_reject: Matched entry DEFAULT at line 11
(2)     [attr_filter.access_reject] = updated
(2)     [eap] = noop
(2)     policy remove_reply_message_if_eap {
(2)       if (&reply:EAP-Message && &reply:Reply-Message) {
(2)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(2)       else {
(2)         [noop] = noop
(2)       } # else = noop
(2)     } # policy remove_reply_message_if_eap = noop
(2)   } # Post-Auth-Type REJECT = updated
(2) Delaying response for 1.000000 seconds
Waking up in 0.6 seconds.
Waking up in 0.3 seconds.
(2) Sending delayed response
(2) Sent Access-Reject Id 13 from 10.5.5.1:1812 to 10.5.5.10:33994 length 20
Waking up in 0.8 seconds.
(0) Cleaning up request packet ID 11 with timestamp +40
Waking up in 1.3 seconds.
(3) Received Access-Request Id 14 from 10.5.5.10:33515 to 10.5.5.1:1812
length 153
(3)   Service-Type = Framed-User
(3)   Framed-Protocol = PPP
(3)   NAS-Port = 15728923
(3)   NAS-Port-Type = Ethernet
(3)   User-Name = "serwis"
(3)   Calling-Station-Id = "00:0C:42:79:DC:8E"
(3)   Called-Station-Id = "pppoe-server"
(3)   NAS-Port-Id = "pppoe_br"
(3)   CHAP-Challenge = 0xae6e7e4edc6c7d12dbe6c46e016a84e0
(3)   CHAP-Password = 0x0196756c9df1dc459d4231d901434d6a79
(3)   NAS-Identifier = "PPPoE_MT_Test"
(3)   NAS-IP-Address = 10.5.5.10
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/lms
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3) chap:   &control:Auth-Type := CHAP
(3)     [chap] = ok
(3)     [mschap] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "serwis", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: No EAP-Message, not doing EAP
(3)     [eap] = noop
(3)     if (Service-Type == Login-User){
(3)     if (Service-Type == Login-User) -> FALSE
(3)     if (Framed-Protocol == PPP){
(3)     if (Framed-Protocol == PPP) -> TRUE
(3)     if (Framed-Protocol == PPP) {
(3)       redundant {
(3) lms: EXPAND %{User-Name}
(3) lms:    --> serwis
(3) lms: SQL-User-Name set to 'serwis'
rlm_sql (lms): 0 of 0 connections in use.  You  may need to increase "spare"
rlm_sql (lms): Last connection attempt failed, waiting 30 seconds before
retrying
(3)         [lms] = fail
(3) files: users: Matched entry DEFAULT at line 186
(3)         [files] = ok
(3)       } # redundant = ok
(3)     } # if (Framed-Protocol == PPP) = ok
(3)     [expiration] = noop
(3)     [logintime] = noop
(3) pap: WARNING: No "known good" password found for the user.  Not setting
Auth-Type
(3) pap: WARNING: Authentication will fail unless a "known good" password
is available
(3)     [pap] = noop
(3)   } # authorize = ok
(3) Found Auth-Type = CHAP
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(3)   Auth-Type CHAP {
(3) chap: ERROR: &control:Cleartext-Password is required for authentication
(3)     [chap] = fail
(3)   } # Auth-Type CHAP = fail
(3) Failed to authenticate the user
(3) Using Post-Auth-Type Reject
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/lms
(3)   Post-Auth-Type REJECT {
(3) attr_filter.access_reject: EXPAND %{User-Name}
(3) attr_filter.access_reject:    --> serwis
(3) attr_filter.access_reject: Matched entry DEFAULT at line 11
(3)     [attr_filter.access_reject] = updated
(3)     [eap] = noop
(3)     policy remove_reply_message_if_eap {
(3)       if (&reply:EAP-Message && &reply:Reply-Message) {
(3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(3)       else {
(3)         [noop] = noop
(3)       } # else = noop
(3)     } # policy remove_reply_message_if_eap = noop
(3)   } # Post-Auth-Type REJECT = updated
(3) Delaying response for 1.000000 seconds
Waking up in 0.5 seconds.
(1) Cleaning up request packet ID 12 with timestamp +42
Waking up in 0.1 seconds.
Waking up in 0.3 seconds.
(3) Sending delayed response
(3) Sent Access-Reject Id 14 from 10.5.5.1:1812 to 10.5.5.10:33515 length 20


How should I configure users file to success authorize clients?



-- 
Pozdrawiam
Marcin / nicraM


More information about the Freeradius-Users mailing list