AD Auth Question
Martin, Jeremy
jmartin at emcc.edu
Mon Jan 1 13:38:30 CET 2018
Ok so this is correct the version that gets distributed with RHEL is 3.0.4 which was installed when the system was deployed and was updated to 3.0.13 as that is the current release within the system. So now I have two questions based on this and the work that I have put in while continuing to work on this issue:
1. Is it common practice to have to destroy the configurations for FR updates? I would seem this could become an issue to put everything back in the configuration files if we can’t upgrade one from version to the next. Is there a utility that is included to account for these types of issues so that FR doesn’t need to “redeployed” repeatedly?
2. Putting in that missing statement, at least for testing, seem to get this moving forward for a bit not all the way. I was able to get the "radtest -t mschap testuser simplepass 127.0.0.1:18120 0 testing123” to work as well as a eapol_test mschapv2 test to work so at least I can connect to a single directory for the moment but here is the ugly part: the client seems to stop communicating part way through the process, from reading the available resources it would seem that this can indicate a “trust” issue when the client just stops communicating. I would agree as this appears to be the case from checking the clients event viewer:
Intel(R) Ethernet Connection I217-LM
host/lellis.emcc.edu
-
-
0
327685
Explicit Eap failure received
0
I am assuming that is what is going on here anyways. So I went back and regenerated a certificate request on the FR server signed it with the appropriate OID for sever authentication, double checked the output to make sure the chain is valid and the extended uses are correct then double checked the configuration files to make sure I was pointing to the new files and tried it again, same result. So I then went to great effort to export the keys and certificates from my NPS server as I know these are trusted and working as they are currently doing the authentication and assignment for this process and put them on the FR server, same result the client generates the same error client side.
So at this point I know I have a good working trust, good working certificates and a good working client when used against a known working server. So this leads me to the question, how do I verify and validate that FR is encrypting data correctly as the client seems to indicate it is not by its behavior. I could disable client validation to test but this would effect hundreds of computers in production and I don’t think I am willing to take a chance on changing that GPO.
If anyone has some thoughts on this particular road block I am open to any suggestions, I am including the FR trace incase it helps inspire some thoughts.
Jeremy
radiusd -X
FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/sql
including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/raddb/mods-enabled/date
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 10.40.0.0/16 {
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.40.0.0/16. Please fix your configuration
Support for old-style clients will be removed in a future release
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = mschap
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_dhcp
# Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 1024
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüà âæçèéêëîïôÅùûüaÿÃ
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÅÃß"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00} --domain=EMCC"
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_sql
# Loading module "sql" from file /etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "networkaccess"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype,acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{Acct-Session-Time}', acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate, nasid, nasportid, stationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S', '%{NAS-Identifier}', '%{NAS-Port-ID}', '%{Calling-Station-Id}')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
}
instantiate {
}
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/emcc/emlnx-nps1.pem"
certificate_file = "/etc/raddb/certs/emcc/emlnx-nps1_short.cer"
ca_file = "/etc/raddb/certs/emcc/ca.cer"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.5.56-MariaDB
mysql {
tls {
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "networkaccess"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 4
max = 32
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'networkaccess' on Localhost via UNIX socket, server version 5.5.56-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'networkaccess' on Localhost via UNIX socket, server version 5.5.56-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'networkaccess' on Localhost via UNIX socket, server version 5.5.56-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'networkaccess' on Localhost via UNIX socket, server version 5.5.56-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'networkaccess' on Localhost via UNIX socket, server version 5.5.56-MariaDB, protocol version 10
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 58431
Listening on proxy address :: port 37446
Ready to process requests
(0) Received Access-Request Id 65 from 10.40.10.30:1055 to 10.40.0.199:1812 length 161
(0) User-Name = "host/lellis.emcc.edu"
(0) Service-Type = Framed-User
(0) Framed-MTU = 1500
(0) NAS-IP-Address = 10.40.10.30
(0) NAS-Port-Type = Ethernet
(0) NAS-Port = 295
(0) NAS-Port-Id = "2/1/39"
(0) NAS-Identifier = "MH-RM221-Stack1"
(0) Calling-Station-Id = "A0-48-1C-8E-94-26"
(0) EAP-Message = 0x0201001901686f73742f6c656c6c69732e656d63632e656475
(0) Message-Authenticator = 0xcbbb11ec268db7d8db337af77c77e5b1
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(0) EXPAND %{User-Name}
(0) --> host/lellis.emcc.edu
(0) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (0)
(0) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (0)
(0) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(0) --> 0
(0) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 25
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0x03b86a1803ba6e18
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Sent Access-Challenge Id 65 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(0) EAP-Message = 0x010200160410898a88c898c1e4ef10ebf3541db47daa
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x03b86a1803ba6e1814b763fe93032a17
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 66 from 10.40.10.30:1055 to 10.40.0.199:1812 length 160
(1) User-Name = "host/lellis.emcc.edu"
(1) Service-Type = Framed-User
(1) Framed-MTU = 1500
(1) NAS-IP-Address = 10.40.10.30
(1) NAS-Port-Type = Ethernet
(1) NAS-Port = 295
(1) NAS-Port-Id = "2/1/39"
(1) NAS-Identifier = "MH-RM221-Stack1"
(1) Calling-Station-Id = "A0-48-1C-8E-94-26"
(1) State = 0x03b86a1803ba6e1814b763fe93032a17
(1) EAP-Message = 0x020200060319
(1) Message-Authenticator = 0x7375aec73121e9e89e2ba0bcbf2634a1
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(1) EXPAND %{User-Name}
(1) --> host/lellis.emcc.edu
(1) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (1)
(1) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (1)
(1) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(1) --> 0
(1) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql: --> host/lellis.emcc.edu
(1) sql: SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (2)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'host/lellis.emcc.edu' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'host/lellis.emcc.edu' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'host/lellis.emcc.edu' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'host/lellis.emcc.edu' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (2)
(1) [sql] = notfound
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password is available
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x03b86a1803ba6e18
(1) eap: Finished EAP session with state 0x03b86a1803ba6e18
(1) eap: Previous EAP request found for state 0x03b86a1803ba6e18, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x03b86a1802bb7318
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) Sent Access-Challenge Id 66 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(1) EAP-Message = 0x010300061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x03b86a1802bb731814b763fe93032a17
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 67 from 10.40.10.30:1055 to 10.40.0.199:1812 length 299
(2) User-Name = "host/lellis.emcc.edu"
(2) Service-Type = Framed-User
(2) Framed-MTU = 1500
(2) NAS-IP-Address = 10.40.10.30
(2) NAS-Port-Type = Ethernet
(2) NAS-Port = 295
(2) NAS-Port-Id = "2/1/39"
(2) NAS-Identifier = "MH-RM221-Stack1"
(2) Calling-Station-Id = "A0-48-1C-8E-94-26"
(2) State = 0x03b86a1802bb731814b763fe93032a17
(2) EAP-Message = 0x0203009119800000008716030100820100007e03015a4a1594608fc5e4df9fa1b507ae22267e43e622111650c56ae61820566fe12f20ba120000a297e54b0dfe946b6539031c9be736d5fe83a94b146df951d52bc669001cc014c013003900330035002fc00ac00900380032000a001300050004010000
(2) Message-Authenticator = 0x7f61613003b8dc320c141d82cfe0a47f
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(2) EXPAND %{User-Name}
(2) --> host/lellis.emcc.edu
(2) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (3)
(2) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (3)
(2) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(2) --> 0
(2) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 145
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x03b86a1802bb7318
(2) eap: Finished EAP session with state 0x03b86a1802bb7318
(2) eap: Previous EAP request found for state 0x03b86a1802bb7318, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 135 bytes
(2) eap_peap: Got complete TLS record (135 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.0 Handshake [length 0082], ClientHello
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0039], ServerHello
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0c60], Certificate
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: SSLv3 read client certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x03b86a1801bc7318
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) Sent Access-Challenge Id 67 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(2) EAP-Message = 0x010403ec19c000000dfc1603010039020000350301af9f0ae6b1f4eef8a92de3f7ee7844da8b2002656c58b3f31bd6fb345043e61f00c01400000dff01000100000b0004030001021603010c600b000c5c000c590006d9308206d5308204bda00302010202137d00002b8a1d52bc94096a585a00000000
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x03b86a1801bc731814b763fe93032a17
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 68 from 10.40.10.30:1055 to 10.40.0.199:1812 length 160
(3) User-Name = "host/lellis.emcc.edu"
(3) Service-Type = Framed-User
(3) Framed-MTU = 1500
(3) NAS-IP-Address = 10.40.10.30
(3) NAS-Port-Type = Ethernet
(3) NAS-Port = 295
(3) NAS-Port-Id = "2/1/39"
(3) NAS-Identifier = "MH-RM221-Stack1"
(3) Calling-Station-Id = "A0-48-1C-8E-94-26"
(3) State = 0x03b86a1801bc731814b763fe93032a17
(3) EAP-Message = 0x020400061900
(3) Message-Authenticator = 0x1be8a4bc58b4e69f4ee5a92f13e13d20
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(3) EXPAND %{User-Name}
(3) --> host/lellis.emcc.edu
(3) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (4)
(3) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (4)
(3) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(3) --> 0
(3) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x03b86a1801bc7318
(3) eap: Finished EAP session with state 0x03b86a1801bc7318
(3) eap: Previous EAP request found for state 0x03b86a1801bc7318, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 1000
(3) eap: EAP session adding &reply:State = 0x03b86a1800bd7318
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) Sent Access-Challenge Id 68 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(3) EAP-Message = 0x010503e819406461703a2f2f2f434e3d656d7372762d646f6d636572742c434e3d4149412c434e3d5075626c69632532304b657925323053657276696365732c434e3d53657276696365732c434e3d436f6e66696775726174696f6e2c44433d656d63632c44433d6564753f6341436572746966696361
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x03b86a1800bd731814b763fe93032a17
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 69 from 10.40.10.30:1055 to 10.40.0.199:1812 length 160
(4) User-Name = "host/lellis.emcc.edu"
(4) Service-Type = Framed-User
(4) Framed-MTU = 1500
(4) NAS-IP-Address = 10.40.10.30
(4) NAS-Port-Type = Ethernet
(4) NAS-Port = 295
(4) NAS-Port-Id = "2/1/39"
(4) NAS-Identifier = "MH-RM221-Stack1"
(4) Calling-Station-Id = "A0-48-1C-8E-94-26"
(4) State = 0x03b86a1800bd731814b763fe93032a17
(4) EAP-Message = 0x020500061900
(4) Message-Authenticator = 0xb231a0efd577966ae680e111f17197de
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(4) EXPAND %{User-Name}
(4) --> host/lellis.emcc.edu
(4) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (0)
(4) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (0)
(4) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(4) --> 0
(4) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x03b86a1800bd7318
(4) eap: Finished EAP session with state 0x03b86a1800bd7318
(4) eap: Previous EAP request found for state 0x03b86a1800bd7318, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 1000
(4) eap: EAP session adding &reply:State = 0x03b86a1807be7318
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) Sent Access-Challenge Id 69 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(4) EAP-Message = 0x010603e819400992268993f22c640119160365647531143012060a0992268993f22c6401191604656d6363311630140603550403130d656d7372762d646f6d6365727430820222300d06092a864886f70d01010105000382020f003082020a0282020100a3edfe3d3ba457cc7881fcb294d6dda4525bbe
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x03b86a1807be731814b763fe93032a17
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 70 from 10.40.10.30:1055 to 10.40.0.199:1812 length 160
(5) User-Name = "host/lellis.emcc.edu"
(5) Service-Type = Framed-User
(5) Framed-MTU = 1500
(5) NAS-IP-Address = 10.40.10.30
(5) NAS-Port-Type = Ethernet
(5) NAS-Port = 295
(5) NAS-Port-Id = "2/1/39"
(5) NAS-Identifier = "MH-RM221-Stack1"
(5) Calling-Station-Id = "A0-48-1C-8E-94-26"
(5) State = 0x03b86a1807be731814b763fe93032a17
(5) EAP-Message = 0x020600061900
(5) Message-Authenticator = 0x3b0c97fff9af475f80e3de8f5f9b60fe
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5) authorize {
(5) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(5) EXPAND %{User-Name}
(5) --> host/lellis.emcc.edu
(5) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (1)
(5) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (1)
(5) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(5) --> 0
(5) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x03b86a1807be7318
(5) eap: Finished EAP session with state 0x03b86a1807be7318
(5) eap: Previous EAP request found for state 0x03b86a1807be7318, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment
(5) eap_peap: [eaptls verify] = request
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 7 length 604
(5) eap: EAP session adding &reply:State = 0x03b86a1806bf7318
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found. Ignoring.
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) Sent Access-Challenge Id 70 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(5) EAP-Message = 0x0107025c190095563efc6a8b68d993848ffcfef14e09ff65f4313851715d81378ddeff1d1c2e3bf50670c552797095139905b94856225f4b5310548b2def3ae31ca93a937886ce9e1e8990c1353bce29c84fad1372945d45fef169a3831038648e825e023b88c313950d51b2c4a4505d90ce57f54f0a43
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x03b86a1806bf731814b763fe93032a17
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 71 from 10.40.10.30:1055 to 10.40.0.199:1812 length 160
(6) User-Name = "host/lellis.emcc.edu"
(6) Service-Type = Framed-User
(6) Framed-MTU = 1500
(6) NAS-IP-Address = 10.40.10.30
(6) NAS-Port-Type = Ethernet
(6) NAS-Port = 295
(6) NAS-Port-Id = "2/1/39"
(6) NAS-Identifier = "MH-RM221-Stack1"
(6) Calling-Station-Id = "A0-48-1C-8E-94-26"
(6) State = 0x03b86a1806bf731814b763fe93032a17
(6) EAP-Message = 0x020700061900
(6) Message-Authenticator = 0x50a95987912ee6bb02138c87b0f56266
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6) authorize {
(6) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) {
(6) EXPAND %{User-Name}
(6) --> host/lellis.emcc.edu
(6) SQL-User-Name set to 'host/lellis.emcc.edu'
rlm_sql (sql): Reserved connection (2)
(6) Executing select query: CALL rejecteduser('host/lellis.emcc.edu')
rlm_sql (sql): Released connection (2)
(6) EXPAND %{sql:CALL rejecteduser('%{User-Name}')}
(6) --> 0
(6) if ("%{sql:CALL rejecteduser('%{User-Name}')}" > 0) -> FALSE
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "host/lellis.emcc.edu", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 6
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x03b86a1806bf7318
(6) eap: Finished EAP session with state 0x03b86a1806bf7318
(6) eap: Previous EAP request found for state 0x03b86a1806bf7318, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment
(6) eap_peap: [eaptls verify] = request
(6) eap_peap: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 8 length 6
(6) eap: EAP session adding &reply:State = 0x03b86a1805b07318
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) Sent Access-Challenge Id 71 from 10.40.0.199:1812 to 10.40.10.30:1055 length 0
(6) EAP-Message = 0x010800061900
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x03b86a1805b0731814b763fe93032a17
(6) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 65 with timestamp +9
(1) Cleaning up request packet ID 66 with timestamp +9
(2) Cleaning up request packet ID 67 with timestamp +9
(3) Cleaning up request packet ID 68 with timestamp +9
(4) Cleaning up request packet ID 69 with timestamp +9
(5) Cleaning up request packet ID 70 with timestamp +9
(6) Cleaning up request packet ID 71 with timestamp +9
Ready to process requests
> On Dec 31, 2017, at 10:17 PM, Nathan Ward <lists+freeradius at daork.net> wrote:
>
>
>> On 1/01/2018, at 2:50 PM, Martin, Jeremy <jmartin at emcc.edu> wrote:
>>
>> I don’t see any reference to this in that file.
>>
>> Full file below.
>
>
> <snip>
>
> I think you have a radiusd.conf from an older version of FreeRADIUS, this has been in the radiusd.conf file since 3.0.5.
>
> I would strongly recommend that you figure out whether you really do have a clean install - how are you installing FreeRADIUS?
>
> The default unless it is configured is false. Set it to true and it should work - don’t do that for anything more than a quick test, though. As I say, go through and figure out if you really do have a clean 3.0.13 install. Perhaps you installed < 3.0.5 then upgraded and there’s a radiusd.rpmnew or something kicking around? I’d suggest installing 3.0.13 from scratch, and avoiding an upgrade.
> Perhaps your “clean” install wasn’t on a fresh system, but was rather you removing (or thinking you were removing) FreeRADIUS, then reinstalling it again? If so, between the removal and the reinstall steps, make sure you remove all the config.
>
> --
> Nathan Ward
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list