No Session-Timeout in radtest
Uchenna Nebedum
nebeduch at gmail.com
Thu Jul 5 16:01:09 CEST 2018
You're still supposed to get Session-Timeout as 1800, what happens is that
after the 30min session authentication should fail.
Uchenna Nebedum
On Thu, Jul 5, 2018, 14:48 Rob <het.oosten at gmail.com> wrote:
> Thank you for the reply!
>
> I have added a radreply for the user test like this:
> 1 | test | Session-Timeout | := | 1800
>
> I get a session-timeout reply now, but the value is always 1800
>
> I made some test files for start, update and stop sessions
>
> My entries for user test in radcheck are:
> 18 | test | Cleartext-Password | := | 12345
> |
> | 19 | test | Max-Daily-Session | := | 1800
> Op do 5 jul. 2018 om 14:15 schreef Uchenna Nebedum <nebeduch at gmail.com>:
> >
> > You need to add Session-Timeout attribute to radreply for that user.
> >
> > Uchenna Nebedum
> >
> > On Thu, Jul 5, 2018, 12:13 Rob <het.oosten at gmail.com> wrote:
> >
> > > I have enabled the sqlcounter module with only (standard) dailycounter
> > > enabled. When I do a radtest I get a an Access-Accept reply, but I
> > > expected a Session-Timeout included in the reply. I have added this
> > > user in mysql:
> > >
> > > | 18 | test | Cleartext-Password | := | 12345
> > > |
> > > | 19 | test | Max-Daily-Session | := | 1800
> > >
> > > radtest test 12345 127.0.0.1 18 testing123
> > >
> > > FreeRADIUS Version 3.0.16
> > > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> > > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > > PARTICULAR PURPOSE
> > > You may redistribute copies of FreeRADIUS under the terms of the
> > > GNU General Public License
> > > For more information about these matters, see the file named COPYRIGHT
> > > Starting - reading configuration files ...
> > > including dictionary file /usr/share/freeradius/dictionary
> > > including dictionary file /usr/share/freeradius/dictionary.dhcp
> > > including dictionary file /usr/share/freeradius/dictionary.vqp
> > > including dictionary file /etc/freeradius/3.0/dictionary
> > > including configuration file /etc/freeradius/3.0/radiusd.conf
> > > including configuration file /etc/freeradius/3.0/proxy.conf
> > > including configuration file /etc/freeradius/3.0/clients.conf
> > > including files in directory /etc/freeradius/3.0/mods-enabled/
> > > including configuration file /etc/freeradius/3.0/mods-enabled/eap
> > > including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> > > including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> > > including configuration file /etc/freeradius/3.0/mods-enabled/digest
> > > including configuration file /etc/freeradius/3.0/mods-enabled/pap
> > > including configuration file /etc/freeradius/3.0/mods-enabled/realm
> > > including configuration file
> /etc/freeradius/3.0/mods-enabled/sqlcounter
> > > including configuration file
> > > /etc/freeradius/3.0/mods-config/sql/counter/mysql/dailycounter.conf
> > > including configuration file /etc/freeradius/3.0/mods-enabled/unix
> > > including configuration file /etc/freeradius/3.0/mods-enabled/exec
> > > including configuration file /etc/freeradius/3.0/mods-enabled/detail
> > > including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> > > including configuration file /etc/freeradius/3.0/mods-enabled/soh
> > > including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> > > including configuration file /etc/freeradius/3.0/mods-enabled/always
> > > including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> > > including configuration file /etc/freeradius/3.0/mods-enabled/sql
> > > including configuration file
> > > /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
> > > including configuration file /etc/freeradius/3.0/mods-enabled/echo
> > > including configuration file
> /etc/freeradius/3.0/mods-enabled/preprocess
> > > including configuration file
> /etc/freeradius/3.0/mods-enabled/detail.log
> > > including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> > > including configuration file
> > > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > > including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > > including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> > > including configuration file /etc/freeradius/3.0/mods-enabled/chap
> > > including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> > > including configuration file /etc/freeradius/3.0/mods-enabled/expr
> > > including configuration file /etc/freeradius/3.0/mods-enabled/files
> > > including configuration file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> > > including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> > > including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> > > including configuration file
> /etc/freeradius/3.0/mods-enabled/expiration
> > > including files in directory /etc/freeradius/3.0/policy.d/
> > > including configuration file /etc/freeradius/3.0/policy.d/dhcp
> > > including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> > > including configuration file /etc/freeradius/3.0/policy.d/debug
> > > including configuration file /etc/freeradius/3.0/policy.d/accounting
> > > including configuration file /etc/freeradius/3.0/policy.d/eap
> > > including configuration file /etc/freeradius/3.0/policy.d/filter
> > > including configuration file
> /etc/freeradius/3.0/policy.d/canonicalization
> > > including configuration file
> > > /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> > > including configuration file /etc/freeradius/3.0/policy.d/control
> > > including configuration file /etc/freeradius/3.0/policy.d/cui
> > > including configuration file /etc/freeradius/3.0/policy.d/operator-name
> > > including files in directory /etc/freeradius/3.0/sites-enabled/
> > > including configuration file /etc/freeradius/3.0/sites-enabled/default
> > > including configuration file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> > > main {
> > > security {
> > > user = "freerad"
> > > group = "freerad"
> > > allow_core_dumps = no
> > > }
> > > name = "freeradius"
> > > prefix = "/usr"
> > > localstatedir = "/var"
> > > logdir = "/var/log/freeradius"
> > > run_dir = "/var/run/freeradius"
> > > }
> > > main {
> > > name = "freeradius"
> > > prefix = "/usr"
> > > localstatedir = "/var"
> > > sbindir = "/usr/sbin"
> > > logdir = "/var/log/freeradius"
> > > run_dir = "/var/run/freeradius"
> > > libdir = "/usr/lib/freeradius"
> > > radacctdir = "/var/log/freeradius/radacct"
> > > hostname_lookups = no
> > > max_request_time = 30
> > > cleanup_delay = 5
> > > max_requests = 16384
> > > pidfile = "/var/run/freeradius/freeradius.pid"
> > > checkrad = "/usr/sbin/checkrad"
> > > debug_level = 0
> > > proxy_requests = yes
> > > log {
> > > stripped_names = no
> > > auth = no
> > > auth_badpass = no
> > > auth_goodpass = no
> > > colourise = yes
> > > msg_denied = "You are already logged in - access denied"
> > > }
> > > resources {
> > > }
> > > security {
> > > max_attributes = 200
> > > reject_delay = 1.000000
> > > status_server = yes
> > > }
> > > }
> > > radiusd: #### Loading Realms and Home Servers ####
> > > proxy server {
> > > retry_delay = 5
> > > retry_count = 3
> > > default_fallback = no
> > > dead_time = 120
> > > wake_all_if_all_dead = no
> > > }
> > > home_server localhost {
> > > ipaddr = 127.0.0.1
> > > port = 1812
> > > type = "auth"
> > > secret = <<< secret >>>
> > > response_window = 20.000000
> > > response_timeouts = 1
> > > max_outstanding = 65536
> > > zombie_period = 40
> > > status_check = "status-server"
> > > ping_interval = 30
> > > check_interval = 30
> > > check_timeout = 4
> > > num_answers_to_alive = 3
> > > revive_interval = 120
> > > limit {
> > > max_connections = 16
> > > max_requests = 0
> > > lifetime = 0
> > > idle_timeout = 0
> > > }
> > > coa {
> > > irt = 2
> > > mrt = 16
> > > mrc = 5
> > > mrd = 30
> > > }
> > > }
> > > home_server_pool my_auth_failover {
> > > type = fail-over
> > > home_server = localhost
> > > }
> > > realm example.com {
> > > auth_pool = my_auth_failover
> > > }
> > > realm LOCAL {
> > > }
> > > radiusd: #### Loading Clients ####
> > > client localhost {
> > > ipaddr = 127.0.0.1
> > > require_message_authenticator = no
> > > secret = <<< secret >>>
> > > nas_type = "other"
> > > proto = "*"
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > client localhost_ipv6 {
> > > ipv6addr = ::1
> > > require_message_authenticator = no
> > > secret = <<< secret >>>
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > client all {
> > > ipaddr = 0.0.0.0
> > > require_message_authenticator = no
> > > secret = <<< secret >>>
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > Debugger not attached
> > > # Creating Auth-Type = mschap
> > > # Creating Auth-Type = digest
> > > # Creating Auth-Type = eap
> > > # Creating Auth-Type = PAP
> > > # Creating Auth-Type = CHAP
> > > # Creating Auth-Type = MS-CHAP
> > > radiusd: #### Instantiating modules ####
> > > modules {
> > > # Loaded module rlm_eap
> > > # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> > > eap {
> > > default_eap_type = "md5"
> > > timer_expire = 60
> > > ignore_unknown_eap_types = no
> > > cisco_accounting_username_bug = no
> > > max_sessions = 16384
> > > }
> > > # Loaded module rlm_radutmp
> > > # Loading module "radutmp" from file
> > > /etc/freeradius/3.0/mods-enabled/radutmp
> > > radutmp {
> > > filename = "/var/log/freeradius/radutmp"
> > > username = "%{User-Name}"
> > > case_sensitive = yes
> > > check_with_nas = yes
> > > permissions = 384
> > > caller_id = yes
> > > }
> > > # Loaded module rlm_utf8
> > > # Loading module "utf8" from file
> /etc/freeradius/3.0/mods-enabled/utf8
> > > # Loaded module rlm_digest
> > > # Loading module "digest" from file
> > > /etc/freeradius/3.0/mods-enabled/digest
> > > # Loaded module rlm_pap
> > > # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> > > pap {
> > > normalise = yes
> > > }
> > > # Loaded module rlm_realm
> > > # Loading module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> > > realm IPASS {
> > > format = "prefix"
> > > delimiter = "/"
> > > ignore_default = no
> > > ignore_null = no
> > > }
> > > # Loading module "suffix" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > realm suffix {
> > > format = "suffix"
> > > delimiter = "@"
> > > ignore_default = no
> > > ignore_null = no
> > > }
> > > # Loading module "realmpercent" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > realm realmpercent {
> > > format = "suffix"
> > > delimiter = "%"
> > > ignore_default = no
> > > ignore_null = no
> > > }
> > > # Loading module "ntdomain" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > realm ntdomain {
> > > format = "prefix"
> > > delimiter = "\\"
> > > ignore_default = no
> > > ignore_null = no
> > > }
> > > # Loaded module rlm_sqlcounter
> > > # Loading module "dailycounter" from file
> > > /etc/freeradius/3.0/mods-enabled/sqlcounter
> > > sqlcounter dailycounter {
> > > sql_module_instance = "sql"
> > > key = "User-Name"
> > > query = "SELECT SUM(acctsessiontime - GREATEST((%%b -
> > > UNIX_TIMESTAMP(acctstarttime)), 0)) FROM radacct WHERE username =
> > > '%{User-Name}' AND UNIX_TIMESTAMP(acctstarttime) + acctsessiontime >
> > > '%%b'"
> > > reset = "daily"
> > > counter_name = "Daily-Session-Time"
> > > check_name = "Max-Daily-Session"
> > > reply_name = "Session-Timeout"
> > > }
> > > # Loaded module rlm_unix
> > > # Loading module "unix" from file
> /etc/freeradius/3.0/mods-enabled/unix
> > > unix {
> > > radwtmp = "/var/log/freeradius/radwtmp"
> > > }
> > > Creating attribute Unix-Group
> > > # Loaded module rlm_exec
> > > # Loading module "exec" from file
> /etc/freeradius/3.0/mods-enabled/exec
> > > exec {
> > > wait = no
> > > input_pairs = "request"
> > > shell_escape = yes
> > > timeout = 10
> > > }
> > > # Loaded module rlm_detail
> > > # Loading module "detail" from file
> > > /etc/freeradius/3.0/mods-enabled/detail
> > > detail {
> > > filename =
> > >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > > header = "%t"
> > > permissions = 384
> > > locking = no
> > > escape_filenames = no
> > > log_packet_header = no
> > > }
> > > # Loaded module rlm_cache
> > > # Loading module "cache_eap" from file
> > > /etc/freeradius/3.0/mods-enabled/cache_eap
> > > cache cache_eap {
> > > driver = "rlm_cache_rbtree"
> > > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> > > ttl = 15
> > > max_entries = 0
> > > epoch = 0
> > > add_stats = no
> > > }
> > > # Loaded module rlm_soh
> > > # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> > > soh {
> > > dhcp = yes
> > > }
> > > # Loading module "sradutmp" from file
> > > /etc/freeradius/3.0/mods-enabled/sradutmp
> > > radutmp sradutmp {
> > > filename = "/var/log/freeradius/sradutmp"
> > > username = "%{User-Name}"
> > > case_sensitive = yes
> > > check_with_nas = yes
> > > permissions = 420
> > > caller_id = no
> > > }
> > > # Loaded module rlm_always
> > > # Loading module "reject" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > always reject {
> > > rcode = "reject"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
> > > always fail {
> > > rcode = "fail"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
> > > always ok {
> > > rcode = "ok"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "handled" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > always handled {
> > > rcode = "handled"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "invalid" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > always invalid {
> > > rcode = "invalid"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "userlock" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > always userlock {
> > > rcode = "userlock"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "notfound" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > always notfound {
> > > rcode = "notfound"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
> > > always noop {
> > > rcode = "noop"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loading module "updated" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > always updated {
> > > rcode = "updated"
> > > simulcount = 0
> > > mpp = no
> > > }
> > > # Loaded module rlm_linelog
> > > # Loading module "linelog" from file
> > > /etc/freeradius/3.0/mods-enabled/linelog
> > > linelog {
> > > filename = "/var/log/freeradius/linelog"
> > > escape_filenames = no
> > > syslog_severity = "info"
> > > permissions = 384
> > > format = "This is a log message for %{User-Name}"
> > > reference = "messages.%{%{reply:Packet-Type}:-default}"
> > > }
> > > # Loading module "log_accounting" from file
> > > /etc/freeradius/3.0/mods-enabled/linelog
> > > linelog log_accounting {
> > > filename = "/var/log/freeradius/linelog-accounting"
> > > escape_filenames = no
> > > syslog_severity = "info"
> > > permissions = 384
> > > format = ""
> > > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> > > }
> > > # Loaded module rlm_sql
> > > # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> > > sql {
> > > driver = "rlm_sql_mysql"
> > > server = "localhost"
> > > port = 3306
> > > login = "radius"
> > > password = <<< secret >>>
> > > radius_db = "radius"
> > > read_groups = yes
> > > read_profiles = yes
> > > read_clients = no
> > > delete_stale_sessions = yes
> > > sql_user_name = "%{User-Name}"
> > > default_user_profile = ""
> > > client_query = "SELECT id, nasname, shortname, type, secret, server
> FROM
> > > nas"
> > > authorize_check_query = "SELECT id, username, attribute, value, op
> > > FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > > authorize_reply_query = "SELECT id, username, attribute, value, op
> > > FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > > authorize_group_check_query = "SELECT id, groupname, attribute,
> > > Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY
> > > id"
> > > authorize_group_reply_query = "SELECT id, groupname, attribute,
> > > value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY
> > > id"
> > > group_membership_query = "SELECT groupname FROM radusergroup WHERE
> > > username = '%{SQL-User-Name}' ORDER BY priority"
> > > simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> > > '%{SQL-User-Name}' AND acctstoptime IS NULL"
> > > simul_verify_query = "SELECT radacctid, acctsessionid, username,
> > > nasipaddress, nasportid, framedipaddress, callingstationid,
> > > framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
> > > acctstoptime IS NULL"
> > > safe_characters =
> > > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > > /"
> > > accounting {
> > > reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> > > type {
> > > accounting-on {
> > > query = "UPDATE radacct SET acctstoptime =
> > > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> > > }
> > > accounting-off {
> > > query = "UPDATE radacct SET acctstoptime =
> > > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> > > }
> > > start {
> > > query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
> > > username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
> > > acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
> > > connectinfo_start, connectinfo_stop, acctinputoctets,
> > > acctoutputoctets, calledstationid, callingstationid,
> > > acctterminatecause, servicetype, framedprotocol, framedipaddress)
> > > VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
> > > '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
> > > '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
> > > FROM_UNIXTIME(%{integer:Event-Timestamp}),
> > > FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
> > > '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> > > '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> > > '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
> > > }
> > > interim-update {
> > > query = "UPDATE radacct SET acctupdatetime =
> > > (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> > > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval =
> > > %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> > > framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> > > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > > '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> > > '%{Acct-Unique-Session-Id}'"
> > > }
> > > stop {
> > > query = "UPDATE radacct SET acctstoptime =
> > > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > > '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> > > '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> > > AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> > > }
> > > }
> > > }
> > > post-auth {
> > > reference = ".query"
> > > query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> > > VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> > > '%{reply:Packet-Type}', '%S')"
> > > }
> > > }
> > > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> > > linked
> > > Creating attribute SQL-Group
> > > # Loading module "echo" from file
> /etc/freeradius/3.0/mods-enabled/echo
> > > exec echo {
> > > wait = yes
> > > program = "/bin/echo %{User-Name}"
> > > input_pairs = "request"
> > > output_pairs = "reply"
> > > shell_escape = yes
> > > }
> > > # Loaded module rlm_preprocess
> > > # Loading module "preprocess" from file
> > > /etc/freeradius/3.0/mods-enabled/preprocess
> > > preprocess {
> > > huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> > > hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> > > with_ascend_hack = no
> > > ascend_channels_per_line = 23
> > > with_ntdomain_hack = no
> > > with_specialix_jetstream_hack = no
> > > with_cisco_vsa_hack = no
> > > with_alvarion_vsa_hack = no
> > > }
> > > # Loading module "auth_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > detail auth_log {
> > > filename =
> > >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > > header = "%t"
> > > permissions = 384
> > > locking = no
> > > escape_filenames = no
> > > log_packet_header = no
> > > }
> > > # Loading module "reply_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > detail reply_log {
> > > filename =
> > >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > > header = "%t"
> > > permissions = 384
> > > locking = no
> > > escape_filenames = no
> > > log_packet_header = no
> > > }
> > > # Loading module "pre_proxy_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > detail pre_proxy_log {
> > > filename =
> > >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > > header = "%t"
> > > permissions = 384
> > > locking = no
> > > escape_filenames = no
> > > log_packet_header = no
> > > }
> > > # Loading module "post_proxy_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > detail post_proxy_log {
> > > filename =
> > >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > > header = "%t"
> > > permissions = 384
> > > locking = no
> > > escape_filenames = no
> > > log_packet_header = no
> > > }
> > > # Loaded module rlm_replicate
> > > # Loading module "replicate" from file
> > > /etc/freeradius/3.0/mods-enabled/replicate
> > > # Loaded module rlm_dynamic_clients
> > > # Loading module "dynamic_clients" from file
> > > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > > # Loading module "ntlm_auth" from file
> > > /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > > exec ntlm_auth {
> > > wait = yes
> > > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> > > --username=%{mschap:User-Name} --password=%{User-Password}"
> > > shell_escape = yes
> > > }
> > > # Loaded module rlm_passwd
> > > # Loading module "etc_passwd" from file
> > > /etc/freeradius/3.0/mods-enabled/passwd
> > > passwd etc_passwd {
> > > filename = "/etc/passwd"
> > > format = "*User-Name:Crypt-Password:"
> > > delimiter = ":"
> > > ignore_nislike = no
> > > ignore_empty = yes
> > > allow_multiple_keys = no
> > > hash_size = 100
> > > }
> > > # Loaded module rlm_chap
> > > # Loading module "chap" from file
> /etc/freeradius/3.0/mods-enabled/chap
> > > # Loaded module rlm_logintime
> > > # Loading module "logintime" from file
> > > /etc/freeradius/3.0/mods-enabled/logintime
> > > logintime {
> > > minimum_timeout = 60
> > > }
> > > # Loaded module rlm_expr
> > > # Loading module "expr" from file
> /etc/freeradius/3.0/mods-enabled/expr
> > > expr {
> > > safe_characters =
> > > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > > }
> > > # Loaded module rlm_files
> > > # Loading module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> > > files {
> > > filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> > > acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> > > preproxy_usersfile =
> "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> > > }
> > > # Loaded module rlm_attr_filter
> > > # Loading module "attr_filter.post-proxy" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > attr_filter attr_filter.post-proxy {
> > > filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> > > key = "%{Realm}"
> > > relaxed = no
> > > }
> > > # Loading module "attr_filter.pre-proxy" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > attr_filter attr_filter.pre-proxy {
> > > filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> > > key = "%{Realm}"
> > > relaxed = no
> > > }
> > > # Loading module "attr_filter.access_reject" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > attr_filter attr_filter.access_reject {
> > > filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> > > key = "%{User-Name}"
> > > relaxed = no
> > > }
> > > # Loading module "attr_filter.access_challenge" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > attr_filter attr_filter.access_challenge {
> > > filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> > > key = "%{User-Name}"
> > > relaxed = no
> > > }
> > > # Loading module "attr_filter.accounting_response" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > attr_filter attr_filter.accounting_response {
> > > filename =
> > > "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> > > key = "%{User-Name}"
> > > relaxed = no
> > > }
> > > # Loaded module rlm_mschap
> > > # Loading module "mschap" from file
> > > /etc/freeradius/3.0/mods-enabled/mschap
> > > mschap {
> > > use_mppe = yes
> > > require_encryption = no
> > > require_strong = no
> > > with_ntdomain_hack = yes
> > > passchange {
> > > }
> > > allow_retry = yes
> > > winbind_retry_with_normalised_username = no
> > > }
> > > # Loaded module rlm_unpack
> > > # Loading module "unpack" from file
> > > /etc/freeradius/3.0/mods-enabled/unpack
> > > # Loaded module rlm_expiration
> > > # Loading module "expiration" from file
> > > /etc/freeradius/3.0/mods-enabled/expiration
> > > instantiate {
> > > }
> > > # Instantiating module "eap" from file
> > > /etc/freeradius/3.0/mods-enabled/eap
> > > # Linked to sub-module rlm_eap_md5
> > > # Linked to sub-module rlm_eap_leap
> > > # Linked to sub-module rlm_eap_gtc
> > > gtc {
> > > challenge = "Password: "
> > > auth_type = "PAP"
> > > }
> > > # Linked to sub-module rlm_eap_tls
> > > tls {
> > > tls = "tls-common"
> > > }
> > > tls-config tls-common {
> > > verify_depth = 0
> > > ca_path = "/etc/freeradius/3.0/certs"
> > > pem_file_type = yes
> > > private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> > > certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> > > ca_file = "/etc/ssl/certs/ca-certificates.crt"
> > > private_key_password = <<< secret >>>
> > > dh_file = "/etc/freeradius/3.0/certs/dh"
> > > fragment_size = 1024
> > > include_length = yes
> > > auto_chain = yes
> > > check_crl = no
> > > check_all_crl = no
> > > cipher_list = "DEFAULT"
> > > cipher_server_preference = no
> > > ecdh_curve = "prime256v1"
> > > tls_max_version = ""
> > > tls_min_version = "1.0"
> > > cache {
> > > enable = no
> > > lifetime = 24
> > > max_entries = 255
> > > }
> > > verify {
> > > skip_if_ocsp_ok = no
> > > }
> > > ocsp {
> > > enable = no
> > > override_cert_url = yes
> > > url = "http://127.0.0.1/ocsp/"
> > > use_nonce = yes
> > > timeout = 0
> > > softfail = no
> > > }
> > > }
> > > # Linked to sub-module rlm_eap_ttls
> > > ttls {
> > > tls = "tls-common"
> > > default_eap_type = "md5"
> > > copy_request_to_tunnel = no
> > > use_tunneled_reply = no
> > > virtual_server = "inner-tunnel"
> > > include_length = yes
> > > require_client_cert = no
> > > }
> > > tls: Using cached TLS configuration from previous invocation
> > > # Linked to sub-module rlm_eap_peap
> > > peap {
> > > tls = "tls-common"
> > > default_eap_type = "mschapv2"
> > > copy_request_to_tunnel = no
> > > use_tunneled_reply = no
> > > proxy_tunneled_request_as_eap = yes
> > > virtual_server = "inner-tunnel"
> > > soh = no
> > > require_client_cert = no
> > > }
> > > tls: Using cached TLS configuration from previous invocation
> > > # Linked to sub-module rlm_eap_mschapv2
> > > mschapv2 {
> > > with_ntdomain_hack = no
> > > send_error = no
> > > }
> > > # Instantiating module "pap" from file
> > > /etc/freeradius/3.0/mods-enabled/pap
> > > # Instantiating module "IPASS" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > # Instantiating module "suffix" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > # Instantiating module "realmpercent" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > # Instantiating module "ntdomain" from file
> > > /etc/freeradius/3.0/mods-enabled/realm
> > > # Instantiating module "dailycounter" from file
> > > /etc/freeradius/3.0/mods-enabled/sqlcounter
> > > rlm_sqlcounter: Current Time: 1530625024 [2018-07-03 13:37:04], Prev
> > > reset 1530576000 [2018-07-03 00:00:00]
> > > # Instantiating module "detail" from file
> > > /etc/freeradius/3.0/mods-enabled/detail
> > > # Instantiating module "cache_eap" from file
> > > /etc/freeradius/3.0/mods-enabled/cache_eap
> > > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
> > > rlm_cache_rbtree) loaded and linked
> > > # Instantiating module "reject" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "fail" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "ok" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "handled" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "invalid" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "userlock" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "notfound" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "noop" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "updated" from file
> > > /etc/freeradius/3.0/mods-enabled/always
> > > # Instantiating module "linelog" from file
> > > /etc/freeradius/3.0/mods-enabled/linelog
> > > # Instantiating module "log_accounting" from file
> > > /etc/freeradius/3.0/mods-enabled/linelog
> > > # Instantiating module "sql" from file
> > > /etc/freeradius/3.0/mods-enabled/sql
> > > rlm_sql_mysql: libmysql version: 5.7.22
> > > mysql {
> > > tls {
> > > }
> > > warnings = "auto"
> > > }
> > > rlm_sql (sql): Attempting to connect to database "radius"
> > > rlm_sql (sql): Initialising connection pool
> > > pool {
> > > start = 5
> > > min = 3
> > > max = 32
> > > spare = 10
> > > uses = 0
> > > lifetime = 0
> > > cleanup_interval = 30
> > > idle_timeout = 60
> > > retry_delay = 30
> > > spread = no
> > > }
> > > rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> > > used
> > > rlm_sql_mysql: Starting connect to MySQL server
> > > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > > socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10
> > > rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> > > used
> > > rlm_sql_mysql: Starting connect to MySQL server
> > > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > > socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10
> > > rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> > > used
> > > rlm_sql_mysql: Starting connect to MySQL server
> > > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > > socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10
> > > rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> > > used
> > > rlm_sql_mysql: Starting connect to MySQL server
> > > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > > socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10
> > > rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> > > used
> > > rlm_sql_mysql: Starting connect to MySQL server
> > > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > > socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10
> > > # Instantiating module "preprocess" from file
> > > /etc/freeradius/3.0/mods-enabled/preprocess
> > > reading pairlist file
> /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> > > reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> > > # Instantiating module "auth_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > > detail output
> > > # Instantiating module "reply_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > # Instantiating module "pre_proxy_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > # Instantiating module "post_proxy_log" from file
> > > /etc/freeradius/3.0/mods-enabled/detail.log
> > > # Instantiating module "etc_passwd" from file
> > > /etc/freeradius/3.0/mods-enabled/passwd
> > > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> > > # Instantiating module "logintime" from file
> > > /etc/freeradius/3.0/mods-enabled/logintime
> > > # Instantiating module "files" from file
> > > /etc/freeradius/3.0/mods-enabled/files
> > > reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> > > reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> > > reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> > > # Instantiating module "attr_filter.post-proxy" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > reading pairlist file
> > > /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> > > # Instantiating module "attr_filter.pre-proxy" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> > > # Instantiating module "attr_filter.access_reject" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > reading pairlist file
> > > /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> > > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check
> > > item "FreeRADIUS-Response-Delay" found in filter list for realm
> > > "DEFAULT".
> > > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check
> > > item "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> > > "DEFAULT".
> > > # Instantiating module "attr_filter.access_challenge" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > reading pairlist file
> > > /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> > > # Instantiating module "attr_filter.accounting_response" from file
> > > /etc/freeradius/3.0/mods-enabled/attr_filter
> > > reading pairlist file
> > > /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> > > # Instantiating module "mschap" from file
> > > /etc/freeradius/3.0/mods-enabled/mschap
> > > rlm_mschap (mschap): using internal authentication
> > > # Instantiating module "expiration" from file
> > > /etc/freeradius/3.0/mods-enabled/expiration
> > > } # modules
> > > radiusd: #### Loading Virtual Servers ####
> > > server { # from file /etc/freeradius/3.0/radiusd.conf
> > > } # server
> > > server default { # from file /etc/freeradius/3.0/sites-enabled/default
> > > # Loading authenticate {...}
> > > # Loading authorize {...}
> > > Ignoring "ldap" (see raddb/mods-available/README.rst)
> > > # Loading preacct {...}
> > > # Loading accounting {...}
> > > # Loading post-proxy {...}
> > > # Loading post-auth {...}
> > > } # server default
> > > server inner-tunnel { # from file
> > > /etc/freeradius/3.0/sites-enabled/inner-tunnel
> > > # Loading authenticate {...}
> > > # Loading authorize {...}
> > > # Loading session {...}
> > > # Loading post-proxy {...}
> > > # Loading post-auth {...}
> > > # Skipping contents of 'if' as it is always 'false' --
> > > /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
> > > } # server inner-tunnel
> > > radiusd: #### Opening IP addresses and Ports ####
> > > listen {
> > > type = "auth"
> > > ipaddr = *
> > > port = 0
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > listen {
> > > type = "acct"
> > > ipaddr = *
> > > port = 0
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > listen {
> > > type = "auth"
> > > ipv6addr = ::
> > > port = 0
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > listen {
> > > type = "acct"
> > > ipv6addr = ::
> > > port = 0
> > > limit {
> > > max_connections = 16
> > > lifetime = 0
> > > idle_timeout = 30
> > > }
> > > }
> > > listen {
> > > type = "auth"
> > > ipaddr = 127.0.0.1
> > > port = 18120
> > > }
> > > Listening on auth address * port 1812 bound to server default
> > > Listening on acct address * port 1813 bound to server default
> > > Listening on auth address :: port 1812 bound to server default
> > > Listening on acct address :: port 1813 bound to server default
> > > Listening on auth address 127.0.0.1 port 18120 bound to server
> inner-tunnel
> > > Listening on proxy address * port 53283
> > > Listening on proxy address :: port 49427
> > > Ready to process requests
> > > (0) Received Access-Request Id 209 from 127.0.0.1:57236 to
> > > 127.0.0.1:1812 length 74
> > > (0) User-Name = "test"
> > > (0) User-Password = "12345"
> > > (0) NAS-IP-Address = 192.168.1.26
> > > (0) NAS-Port = 18
> > > (0) Message-Authenticator = 0xcd1b705cddbb22efcb91251631b97aa2
> > > (0) # Executing section authorize from file
> > > /etc/freeradius/3.0/sites-enabled/default
> > > (0) authorize {
> > > (0) policy filter_username {
> > > (0) if (&User-Name) {
> > > (0) if (&User-Name) -> TRUE
> > > (0) if (&User-Name) {
> > > (0) if (&User-Name =~ / /) {
> > > (0) if (&User-Name =~ / /) -> FALSE
> > > (0) if (&User-Name =~ /@[^@]*@/ ) {
> > > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > > (0) if (&User-Name =~ /\.\./ ) {
> > > (0) if (&User-Name =~ /\.\./ ) -> FALSE
> > > (0) if ((&User-Name =~ /@/) && (&User-Name !~
> /@(.+)\.(.+)$/)) {
> > > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > > -> FALSE
> > > (0) if (&User-Name =~ /\.$/) {
> > > (0) if (&User-Name =~ /\.$/) -> FALSE
> > > (0) if (&User-Name =~ /@\./) {
> > > (0) if (&User-Name =~ /@\./) -> FALSE
> > > (0) } # if (&User-Name) = notfound
> > > (0) } # policy filter_username = notfound
> > > (0) [preprocess] = ok
> > > (0) [chap] = noop
> > > (0) [mschap] = noop
> > > (0) [digest] = noop
> > > (0) suffix: Checking for suffix after "@"
> > > (0) suffix: No '@' in User-Name = "test", looking up realm NULL
> > > (0) suffix: No such realm "NULL"
> > > (0) [suffix] = noop
> > > (0) eap: No EAP-Message, not doing EAP
> > > (0) [eap] = noop
> > > (0) [files] = noop
> > > (0) sql: EXPAND %{User-Name}
> > > (0) sql: --> test
> > > (0) sql: SQL-User-Name set to 'test'
> > > rlm_sql (sql): Reserved connection (0)
> > > (0) sql: EXPAND SELECT id, username, attribute, value, op FROM
> > > radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
> > > (0) sql: --> SELECT id, username, attribute, value, op FROM
> > > radcheck WHERE username = 'test' ORDER BY id
> > > (0) sql: Executing select query: SELECT id, username, attribute,
> > > value, op FROM radcheck WHERE username = 'test' ORDER BY id
> > > (0) sql: User found in radcheck table
> > > (0) sql: Conditional check items matched, merging assignment check
> items
> > > (0) sql: Cleartext-Password := "12345"
> > > (0) sql: Max-Daily-Session := 1800
> > > (0) sql: EXPAND SELECT id, username, attribute, value, op FROM
> > > radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
> > > (0) sql: --> SELECT id, username, attribute, value, op FROM
> > > radreply WHERE username = 'test' ORDER BY id
> > > (0) sql: Executing select query: SELECT id, username, attribute,
> > > value, op FROM radreply WHERE username = 'test' ORDER BY id
> > > (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> > > '%{SQL-User-Name}' ORDER BY priority
> > > (0) sql: --> SELECT groupname FROM radusergroup WHERE username =
> > > 'test' ORDER BY priority
> > > (0) sql: Executing select query: SELECT groupname FROM radusergroup
> > > WHERE username = 'test' ORDER BY priority
> > > (0) sql: User not found in any groups
> > > rlm_sql (sql): Released connection (0)
> > > Need 5 more connections to reach 10 spares
> > > rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> > > used
> > > rlm_sql_mysql: Starting connect to MySQL server
> > > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > > socket, server version 5.7.22-0ubuntu18.04.1, protocol version 10
> > > (0) [sql] = ok
> > > (0) [expiration] = noop
> > > (0) [logintime] = noop
> > > (0) [pap] = updated
> > > (0) } # authorize = updated
> > > (0) Found Auth-Type = PAP
> > > (0) # Executing group from file
> /etc/freeradius/3.0/sites-enabled/default
> > > (0) Auth-Type PAP {
> > > (0) pap: Login attempt with password
> > > (0) pap: Comparing with "known good" Cleartext-Password
> > > (0) pap: User authenticated successfully
> > > (0) [pap] = ok
> > > (0) } # Auth-Type PAP = ok
> > > (0) # Executing section post-auth from file
> > > /etc/freeradius/3.0/sites-enabled/default
> > > (0) post-auth {
> > > (0) update {
> > > (0) No attributes updated
> > > (0) } # update = noop
> > > (0) sql: EXPAND .query
> > > (0) sql: --> .query
> > > (0) sql: Using query template 'query'
> > > rlm_sql (sql): Reserved connection (1)
> > > (0) sql: EXPAND %{User-Name}
> > > (0) sql: --> test
> > > (0) sql: SQL-User-Name set to 'test'
> > > (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply,
> > > authdate) VALUES ( '%{SQL-User-Name}',
> > > '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
> > > (0) sql: --> INSERT INTO radpostauth (username, pass, reply,
> > > authdate) VALUES ( 'test', '12345', 'Access-Accept', '2018-07-03
> > > 13:37:37')
> > > (0) sql: Executing query: INSERT INTO radpostauth (username, pass,
> > > reply, authdate) VALUES ( 'test', '12345', 'Access-Accept',
> > > '2018-07-03 13:37:37')
> > > (0) sql: SQL query returned: success
> > > (0) sql: 1 record(s) updated
> > > rlm_sql (sql): Released connection (1)
> > > (0) [sql] = ok
> > > (0) [exec] = noop
> > > (0) policy remove_reply_message_if_eap {
> > > (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> > > (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> > > (0) else {
> > > (0) [noop] = noop
> > > (0) } # else = noop
> > > (0) } # policy remove_reply_message_if_eap = noop
> > > (0) } # post-auth = ok
> > > (0) Sent Access-Accept Id 209 from 127.0.0.1:1812 to 127.0.0.1:57236
> > > length 0
> > > (0) Finished request
> > > Waking up in 4.9 seconds.
> > > (0) Cleaning up request packet ID 209 with timestamp +33
> > > Ready to process requests
> > >
> > >
> > > Rob
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > -
> > List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list