installtion of freeradius
m.nageh
minanageh379 at gmail.com
Tue Jun 19 01:15:06 CEST 2018
Are you talking to me ?!
On Tue, Jun 19, 2018, 2:11 PM Javier Escalante <
Javier.Escalante at bwireless.eu> wrote:
> Hello,
>
> This is the radcheck:
>
> Full texts id username attribute op value
> Edit Edit Copy Copy Delete Delete 1 test
> Cleartext-Password := test
>
> Attention!!: I have changed to test, test to make it simpler.
>
> Question; does the user have to be also in the group tables as stated
> here:
> https://wiki.freeradius.org/guide/SQL-HOWTO-for-freeradius-3.x-on-Debian-Ubuntu
> ?
>
> Thanks!!
>
> BR
>
> This is what it says when I execute it as freeradius -X
>
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 38231
> Listening on proxy address :: port 51121
> Ready to process requests
> ^C
> root at server:/home/javier# clear
> root at server:/home/javier# freeradius -X
> FreeRADIUS Version 3.0.16
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/3.0/dictionary
> including configuration file /etc/freeradius/3.0/radiusd.conf
> including configuration file /etc/freeradius/3.0/proxy.conf
> including configuration file /etc/freeradius/3.0/clients.conf
> including files in directory /etc/freeradius/3.0/mods-enabled/
> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> including configuration file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> including configuration file /etc/freeradius/3.0/mods-enabled/files
> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> including configuration file /etc/freeradius/3.0/mods-enabled/sql
> including configuration file
> /etc/freeradius/3.0/mods-config/sql/main/sqlite/queries.conf
> including configuration file /etc/freeradius/3.0/mods-enabled/always
> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> including files in directory /etc/freeradius/3.0/policy.d/
> including configuration file /etc/freeradius/3.0/policy.d/canonicalization
> including configuration file /etc/freeradius/3.0/policy.d/eap
> including configuration file /etc/freeradius/3.0/policy.d/operator-name
> including configuration file /etc/freeradius/3.0/policy.d/control
> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> including configuration file /etc/freeradius/3.0/policy.d/debug
> including configuration file
> /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> including configuration file /etc/freeradius/3.0/policy.d/filter
> including configuration file /etc/freeradius/3.0/policy.d/cui
> including configuration file /etc/freeradius/3.0/policy.d/accounting
> including files in directory /etc/freeradius/3.0/sites-enabled/
> including configuration file /etc/freeradius/3.0/sites-enabled/default
> including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 0.0.0.0/0 {
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "global"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0.
> Please fix your configuration
> Support for old-style clients will be removed in a future release
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = digest
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> # Loaded module rlm_exec
> # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> # Loaded module rlm_logintime
> # Loading module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file
> /etc/freeradius/3.0/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
> files {
> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> preproxy_usersfile =
> "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file
> /etc/freeradius/3.0/mods-enabled/digest
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_detail
> # Loading module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> preprocess {
> huntgroups =
> "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loading module "radutmp" from file
> /etc/freeradius/3.0/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loading module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
> detail {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file
> /etc/freeradius/3.0/mods-enabled/replicate
> # Loaded module rlm_unpack
> # Loading module "unpack" from file
> /etc/freeradius/3.0/mods-enabled/unpack
> # Loaded module rlm_sql
> # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> sql {
> driver = "rlm_sql_null"
> server = ""
> port = 0
> login = ""
> password = <<< secret >>>
> radius_db = "radius"
> read_groups = yes
> read_profiles = yes
> read_clients = no
> delete_stale_sessions = yes
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> client_query = "SELECT id, nasname, shortname, type, secret,
> server FROM nas"
> authorize_check_query = "SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_reply_query = "SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_group_check_query = "SELECT id, groupname, attribute,
> Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
> authorize_group_reply_query = "SELECT id, groupname, attribute,
> value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
> group_membership_query = "SELECT groupname FROM radusergroup WHERE
> username = '%{SQL-User-Name}' ORDER BY priority"
> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> '%{SQL-User-Name}' AND acctstoptime IS NULL"
> simul_verify_query = "SELECT radacctid, acctsessionid, username,
> nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
> FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL"
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> type {
> accounting-on {
> query = "UPDATE radacct SET acctstoptime =
> %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
> (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s',
> acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= %{integer:Event-Timestamp}"
> }
> accounting-off {
> query = "UPDATE radacct SET acctstoptime =
> %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
> (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s',
> acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= %{integer:Event-Timestamp}"
> }
> start {
> query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
> username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
> acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
> connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets,
> calledstationid, callingstationid, acctterminatecause, servicetype,
> framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
> %{%{integer:Event-Timestamp}:-date('now')},
> %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}',
> '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
> '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
> '%{Framed-IP-Address}')"
> }
> interim-update {
> query = "UPDATE radacct SET acctupdatetime =
> %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0,
> framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
> acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
> %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId =
> '%{Acct-Unique-Session-Id}'"
> }
> stop {
> query = "UPDATE radacct SET acctstoptime =
> %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets=
> %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
> acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
> %{%{Acct-Output-Octets}:-0}, acctterminatecause =
> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> }
> }
> }
> post-auth {
> reference = ".query"
> query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')"
> }
> }
> rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked
> Creating attribute SQL-Group
> # Loaded module rlm_always
> # Loading module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
> # Loaded module rlm_linelog
> # Loading module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loading module "ntlm_auth" from file
> /etc/freeradius/3.0/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> instantiate {
> }
> # Instantiating module "eap" from file
> /etc/freeradius/3.0/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/3.0/certs"
> pem_file_type = yes
> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> ca_file = "/etc/ssl/certs/ca-certificates.crt"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/3.0/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> ecdh_curve = "prime256v1"
> tls_max_version = ""
> tls_min_version = "1.0"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
> # Instantiating module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
> # Instantiating module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> # Instantiating module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> # Instantiating module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> # Instantiating module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
> # Instantiating module "pap" from file
> /etc/freeradius/3.0/mods-enabled/pap
> # Instantiating module "sql" from file
> /etc/freeradius/3.0/mods-enabled/sql
> rlm_sql (sql): Attempting to connect to database "radius"
> rlm_sql (sql): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> used
> # Instantiating module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
> # Instantiating module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/3.0/radiusd.conf
> } # server
> server default { # from file /etc/freeradius/3.0/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> server inner-tunnel { # from file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 50516
> Listening on proxy address :: port 53787
> Ready to process requests
>
> And this is the authentication response:
>
> Ready to process requests
> (0) Received Access-Request Id 98 from 127.0.0.1:56002 to 127.0.0.1:1812
> length 74
> (0) User-Name = "test"
> (0) User-Password = "test"
> (0) NAS-IP-Address = 5.135.246.127
> (0) NAS-Port = 10
> (0) Message-Authenticator = 0x04858d63ef3c8e69539cd104bc4dcc01
> (0) # Executing section authorize from file
> /etc/freeradius/3.0/sites-enabled/default
> (0) authorize {
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "test", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: No EAP-Message, not doing EAP
> (0) [eap] = noop
> (0) [files] = noop
> (0) sql: EXPAND %{User-Name}
> (0) sql: --> test
> (0) sql: SQL-User-Name set to 'test'
> rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 188
> seconds
> rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 188
> seconds
> rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 188
> seconds
> rlm_sql (sql): You probably need to lower "min"
> rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 188
> seconds
> rlm_sql (sql): You probably need to lower "min"
> rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 188
> seconds
> rlm_sql (sql): You probably need to lower "min"
> rlm_sql (sql): 0 of 0 connections in use. You may need to increase
> "spare"
> rlm_sql (sql): Opening additional connection (5), 1 of 32 pending slots
> used
> rlm_sql (sql): Reserved connection (5)
> (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
> WHERE username = '%{SQL-User-Name}' ORDER BY id
> (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck
> WHERE username = 'test' ORDER BY id
> (0) sql: Executing select query: SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = 'test' ORDER BY id
> (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> '%{SQL-User-Name}' ORDER BY priority
> (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'test'
> ORDER BY priority
> (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
> username = 'test' ORDER BY priority
> (0) sql: User not found in any groups
> rlm_sql (sql): Released connection (5)
> Need 2 more connections to reach min connections (3)
> rlm_sql (sql): Opening additional connection (6), 1 of 31 pending slots
> used
> (0) [sql] = notfound
> (0) [expiration] = noop
> (0) [logintime] = noop
> (0) pap: WARNING: No "known good" password found for the user. Not
> setting Auth-Type
> (0) pap: WARNING: Authentication will fail unless a "known good" password
> is available
> (0) [pap] = noop
> (0) } # authorize = ok
> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> Reject
> (0) Failed to authenticate the user
> (0) Using Post-Auth-Type Reject
> (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (0) Post-Auth-Type REJECT {
> (0) sql: EXPAND .query
> (0) sql: --> .query
> (0) sql: Using query template 'query'
> rlm_sql (sql): Reserved connection (5)
> (0) sql: EXPAND %{User-Name}
> (0) sql: --> test
> (0) sql: SQL-User-Name set to 'test'
> (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')
> (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( 'test', 'test', 'Access-Reject', '2018-06-19 11:09:18')
> (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
> authdate) VALUES ( 'test', 'test', 'Access-Reject', '2018-06-19 11:09:18')
> (0) sql: SQL query returned: success
> (0) sql: 1 record(s) updated
> rlm_sql (sql): Released connection (5)
> (0) [sql] = ok
> (0) attr_filter.access_reject: EXPAND %{User-Name}
> (0) attr_filter.access_reject: --> test
> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (0) [attr_filter.access_reject] = updated
> (0) [eap] = noop
> (0) policy remove_reply_message_if_eap {
> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (0) else {
> (0) [noop] = noop
> (0) } # else = noop
> (0) } # policy remove_reply_message_if_eap = noop
> (0) } # Post-Auth-Type REJECT = updated
> (0) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (0) Sending delayed response
> (0) Sent Access-Reject Id 98 from 127.0.0.1:1812 to 127.0.0.1:56002
> length 20
> Waking up in 3.9 seconds.
> (0) Cleaning up request packet ID 98 with timestamp +188
> Ready to process requests
>
>
> Javier Escalante
> Business Development Manager
> Javier.escalante at bwireless.eu
> 00 34 626 785 675
> 00 34 93 141 56 36
> 00 41 78 689 85 69
> Skype: fruiz002
> Do you know our IoT solutions? Have a look here: www.bsmart.global
> http://www.bwireless.eu
> Le informamos que, de conformidad con la Ley Orgánica 15/1999, de 13 de
> diciembre, de Protección de Datos de Carácter Personal, se informa que
> todos los datos personales que nos ha facilitado serán incorporados y
> tratados en los ficheros de B’W & TAKACS TELECOM, S.L. para las finalidades
> de su e-mail.
> Puede ejercer sus derechos de acceso, rectificación, cancelación y
> oposición mediante una comunicación a B’W & TAKACS TELECOM, S.L. con
> domicilio en Camil Oliveras, 26, 08032 Barcelona (España), o bien mediante
> una comunicación a la dirección de correo electrónico info at bwireless.eu.
> En ambos casos, deberá acompañar una copia de su documento nacional de
> identidad o documento válido que lo identifique.
>
>
> -----Original Message-----
> From: Freeradius-Users [mailto:freeradius-users-bounces+javier.escalante=
> bwireless.eu at lists.freeradius.org] On Behalf Of Alan Buxey
> Sent: martes, 19 de junio de 2018 12:10
> To: FreeRadius users mailing list
> Subject: Re: installtion of freeradius
>
> Hi
>
> What does your radcheck row look like for that user as debug shows that
> user is not found
>
> alan
>
> On Mon, 18 Jun 2018, 22:01 Javier Escalante, <
> Javier.Escalante at bwireless.eu>
> wrote:
>
> > Hello,
> >
> > Here the debug.
> >
> > Thanks
> >
> > BR
> >
> > 8 20:57:54')
> > (0) sql: SQL query returned: success
> > (0) sql: 1 record(s) updated
> > rlm_sql (sql): Released connection (5)
> > (0) [sql] = ok
> > (0) attr_filter.access_reject: EXPAND %{User-Name}
> > (0) attr_filter.access_reject: --> test
> > (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> > (0) [attr_filter.access_reject] = updated
> > (0) [eap] = noop
> > (0) policy remove_reply_message_if_eap {
> > (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> > (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> > (0) else {
> > (0) [noop] = noop
> > (0) } # else = noop
> > (0) } # policy remove_reply_message_if_eap = noop
> > (0) } # Post-Auth-Type REJECT = updated
> > (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds.
> > Waking up in 0.6 seconds.
> > (0) Sending delayed response
> > (0) Sent Access-Reject Id 37 from 127.0.0.1:1812 to 127.0.0.1:43386
> > length 20 Waking up in 3.9 seconds.
> > (0) Cleaning up request packet ID 37 with timestamp +73 Ready to
> > process requests ^C root at server:/etc/freeradius/3.0# ^C
> > root at server:/etc/freeradius/3.0# cls
> >
> > Command 'cls' not found, but there are 17 similar ones.
> >
> > root at server:/etc/freeradius/3.0# clean
> >
> > Command 'clean' not found, did you mean:
> >
> > command 'clear' from deb ncurses-bin
> > command 'uclean' from deb svn-buildpackage
> > command 'pclean' from deb pbuilder-scripts
> >
> > Try: apt install <deb name>
> >
> > root at server:/etc/freeradius/3.0# clear
> > root at server:/etc/freeradius/3.0# freeradius -X FreeRADIUS Version
> > 3.0.16 Copyright (C) 1999-2017 The FreeRADIUS server project and
> > contributors There is NO warranty; not even for MERCHANTABILITY or
> > FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of
> > FreeRADIUS under the terms of the GNU General Public License For more
> > information about these matters, see the file named COPYRIGHT Starting
> > - reading configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary including
> > dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/freeradius/3.0/dictionary including
> > configuration file /etc/freeradius/3.0/radiusd.conf including
> > configuration file /etc/freeradius/3.0/proxy.conf including
> > configuration file /etc/freeradius/3.0/clients.conf including files in
> > directory /etc/freeradius/3.0/mods-enabled/ including configuration
> > file /etc/freeradius/3.0/mods-enabled/expr
> > including configuration file /etc/freeradius/3.0/mods-enabled/eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> > including configuration file /etc/freeradius/3.0/mods-enabled/exec
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/logintime
> > including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/chap
> > including configuration file /etc/freeradius/3.0/mods-enabled/soh
> > including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> > including configuration file /etc/freeradius/3.0/mods-enabled/files
> > including configuration file /etc/freeradius/3.0/mods-enabled/realm
> > including configuration file /etc/freeradius/3.0/mods-enabled/digest
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/unix
> > including configuration file /etc/freeradius/3.0/mods-enabled/echo
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail
> > including configuration file /etc/freeradius/3.0/mods-enabled/pap
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/replicate
> > including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> > including configuration file /etc/freeradius/3.0/mods-enabled/sql
> > including configuration file
> > /etc/freeradius/3.0/mods-config/sql/main/sqlite/queries.conf
> > including configuration file /etc/freeradius/3.0/mods-enabled/always
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/expiration
> > including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > including files in directory /etc/freeradius/3.0/policy.d/ including
> > configuration file /etc/freeradius/3.0/policy.d/canonicalization
> > including configuration file /etc/freeradius/3.0/policy.d/eap
> > including configuration file
> > /etc/freeradius/3.0/policy.d/operator-name
> > including configuration file /etc/freeradius/3.0/policy.d/control
> > including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> > including configuration file /etc/freeradius/3.0/policy.d/debug
> > including configuration file
> > /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> > including configuration file /etc/freeradius/3.0/policy.d/dhcp
> > including configuration file /etc/freeradius/3.0/policy.d/filter
> > including configuration file /etc/freeradius/3.0/policy.d/cui
> > including configuration file /etc/freeradius/3.0/policy.d/accounting
> > including files in directory /etc/freeradius/3.0/sites-enabled/
> > including configuration file /etc/freeradius/3.0/sites-enabled/default
> > including configuration file
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel
> > main {
> > security {
> > user = "freerad"
> > group = "freerad"
> > allow_core_dumps = no
> > }
> > name = "freeradius"
> > prefix = "/usr"
> > localstatedir = "/var"
> > logdir = "/var/log/freeradius"
> > run_dir = "/var/run/freeradius"
> > }
> > main {
> > name = "freeradius"
> > prefix = "/usr"
> > localstatedir = "/var"
> > sbindir = "/usr/sbin"
> > logdir = "/var/log/freeradius"
> > run_dir = "/var/run/freeradius"
> > libdir = "/usr/lib/freeradius"
> > radacctdir = "/var/log/freeradius/radacct"
> > hostname_lookups = no
> > max_request_time = 30
> > cleanup_delay = 5
> > max_requests = 16384
> > pidfile = "/var/run/freeradius/freeradius.pid"
> > checkrad = "/usr/sbin/checkrad"
> > debug_level = 0
> > proxy_requests = yes
> > log {
> > stripped_names = no
> > auth = no
> > auth_badpass = no
> > auth_goodpass = no
> > colourise = yes
> > msg_denied = "You are already logged in - access denied"
> > }
> > resources {
> > }
> > security {
> > max_attributes = 200
> > reject_delay = 1.000000
> > status_server = yes
> > }
> > }
> > radiusd: #### Loading Realms and Home Servers #### proxy server {
> > retry_delay = 5
> > retry_count = 3
> > default_fallback = no
> > dead_time = 120
> > wake_all_if_all_dead = no
> > }
> > home_server localhost {
> > ipaddr = 127.0.0.1
> > port = 1812
> > type = "auth"
> > secret = <<< secret >>>
> > response_window = 20.000000
> > response_timeouts = 1
> > max_outstanding = 65536
> > zombie_period = 40
> > status_check = "status-server"
> > ping_interval = 30
> > check_interval = 30
> > check_timeout = 4
> > num_answers_to_alive = 3
> > revive_interval = 120
> > limit {
> > max_connections = 16
> > max_requests = 0
> > lifetime = 0
> > idle_timeout = 0
> > }
> > coa {
> > irt = 2
> > mrt = 16
> > mrc = 5
> > mrd = 30
> > }
> > }
> > home_server_pool my_auth_failover {
> > type = fail-over
> > home_server = localhost
> > }
> > realm example.com {
> > auth_pool = my_auth_failover
> > }
> > realm LOCAL {
> > }
> > radiusd: #### Loading Clients ####
> > client localhost {
> > ipaddr = 127.0.0.1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > nas_type = "other"
> > proto = "*"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > client localhost_ipv6 {
> > ipv6addr = ::1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > client 0.0.0.0/0 {
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > shortname = "global"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0.
> > Please fix your configuration
> > Support for old-style clients will be removed in a future release
> > Debugger not attached # Creating Auth-Type = mschap # Creating
> > Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type =
> > PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP
> > radiusd: #### Instantiating modules #### modules {
> > # Loaded module rlm_expr
> > # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> > expr {
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > }
> > # Loaded module rlm_eap
> > # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> > eap {
> > default_eap_type = "md5"
> > timer_expire = 60
> > ignore_unknown_eap_types = no
> > cisco_accounting_username_bug = no
> > max_sessions = 16384
> > }
> > # Loaded module rlm_utf8
> > # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> > # Loaded module rlm_exec
> > # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> > exec {
> > wait = no
> > input_pairs = "request"
> > shell_escape = yes
> > timeout = 10
> > }
> > # Loaded module rlm_cache
> > # Loading module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > cache cache_eap {
> > driver = "rlm_cache_rbtree"
> > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> > ttl = 15
> > max_entries = 0
> > epoch = 0
> > add_stats = no
> > }
> > # Loaded module rlm_dynamic_clients
> > # Loading module "dynamic_clients" from file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > # Loaded module rlm_logintime
> > # Loading module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> > logintime {
> > minimum_timeout = 60
> > }
> > # Loaded module rlm_radutmp
> > # Loading module "sradutmp" from file
> > /etc/freeradius/3.0/mods-enabled/sradutmp
> > radutmp sradutmp {
> > filename = "/var/log/freeradius/sradutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 420
> > caller_id = no
> > }
> > # Loaded module rlm_chap
> > # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> > # Loaded module rlm_soh
> > # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> > soh {
> > dhcp = yes
> > }
> > # Loaded module rlm_mschap
> > # Loading module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> > mschap {
> > use_mppe = yes
> > require_encryption = no
> > require_strong = no
> > with_ntdomain_hack = yes
> > passchange {
> > }
> > allow_retry = yes
> > winbind_retry_with_normalised_username = no
> > }
> > # Loaded module rlm_files
> > # Loading module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> > files {
> > filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> > acctusersfile =
> "/etc/freeradius/3.0/mods-config/files/accounting"
> > preproxy_usersfile =
> > "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> > }
> > # Loaded module rlm_realm
> > # Loading module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> > realm IPASS {
> > format = "prefix"
> > delimiter = "/"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "suffix" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm suffix {
> > format = "suffix"
> > delimiter = "@"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm realmpercent {
> > format = "suffix"
> > delimiter = "%"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm ntdomain {
> > format = "prefix"
> > delimiter = "\\"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loaded module rlm_digest
> > # Loading module "digest" from file
> > /etc/freeradius/3.0/mods-enabled/digest
> > # Loaded module rlm_attr_filter
> > # Loading module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.post-proxy {
> > filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.pre-proxy {
> > filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.access_reject {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.access_challenge {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.accounting_response {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loaded module rlm_detail
> > # Loading module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail auth_log {
> > filename =
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail reply_log {
> > filename =
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail pre_proxy_log {
> > filename =
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail post_proxy_log {
> > filename =
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_passwd
> > # Loading module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> > passwd etc_passwd {
> > filename = "/etc/passwd"
> > format = "*User-Name:Crypt-Password:"
> > delimiter = ":"
> > ignore_nislike = no
> > ignore_empty = yes
> > allow_multiple_keys = no
> > hash_size = 100
> > }
> > # Loaded module rlm_preprocess
> > # Loading module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > preprocess {
> > huntgroups =
> > "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> > hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> > with_ascend_hack = no
> > ascend_channels_per_line = 23
> > with_ntdomain_hack = no
> > with_specialix_jetstream_hack = no
> > with_cisco_vsa_hack = no
> > with_alvarion_vsa_hack = no
> > }
> > # Loading module "radutmp" from file
> > /etc/freeradius/3.0/mods-enabled/radutmp
> > radutmp {
> > filename = "/var/log/freeradius/radutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 384
> > caller_id = yes
> > }
> > # Loaded module rlm_unix
> > # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> > unix {
> > radwtmp = "/var/log/freeradius/radwtmp"
> > }
> > Creating attribute Unix-Group
> > # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> > exec echo {
> > wait = yes
> > program = "/bin/echo %{User-Name}"
> > input_pairs = "request"
> > output_pairs = "reply"
> > shell_escape = yes
> > }
> > # Loading module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> > detail {
> > filename =
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_pap
> > # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> > pap {
> > normalise = yes
> > }
> > # Loaded module rlm_replicate
> > # Loading module "replicate" from file
> > /etc/freeradius/3.0/mods-enabled/replicate
> > # Loaded module rlm_unpack
> > # Loading module "unpack" from file
> > /etc/freeradius/3.0/mods-enabled/unpack
> > # Loaded module rlm_sql
> > # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> > sql {
> > driver = "rlm_sql_null"
> > server = ""
> > port = 0
> > login = ""
> > password = <<< secret >>>
> > radius_db = "radius"
> > read_groups = yes
> > read_profiles = yes
> > read_clients = no
> > delete_stale_sessions = yes
> > sql_user_name = "%{User-Name}"
> > default_user_profile = ""
> > client_query = "SELECT id, nasname, shortname, type, secret,
> > server FROM nas"
> > authorize_check_query = "SELECT id, username, attribute,
> > value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > authorize_reply_query = "SELECT id, username, attribute,
> > value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > authorize_group_check_query = "SELECT id, groupname,
> > attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}'
> ORDER BY id"
> > authorize_group_reply_query = "SELECT id, groupname,
> > attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}'
> ORDER BY id"
> > group_membership_query = "SELECT groupname FROM radusergroup
> > WHERE username = '%{SQL-User-Name}' ORDER BY priority"
> > simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
> > username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
> > simul_verify_query = "SELECT radacctid, acctsessionid,
> > username, nasipaddress, nasportid, framedipaddress, callingstationid,
> > framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND
> acctstoptime IS NULL"
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> > accounting {
> > reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> > type {
> > accounting-on {
> > query = "UPDATE radacct SET acctstoptime =
> > %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
> > (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} -
> > strftime('%%s', acctstarttime)), acctterminatecause =
> '%{Acct-Terminate-Cause}' WHERE
> > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > acctstarttime <= %{integer:Event-Timestamp}"
> > }
> > accounting-off {
> > query = "UPDATE radacct SET acctstoptime =
> > %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
> > (%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} -
> > strftime('%%s', acctstarttime)), acctterminatecause =
> '%{Acct-Terminate-Cause}' WHERE
> > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > acctstarttime <= %{integer:Event-Timestamp}"
> > }
> > start {
> > query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
> > username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
> > acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
> > connectinfo_start, connectinfo_stop, acctinputoctets,
> > acctoutputoctets, calledstationid, callingstationid,
> > acctterminatecause, servicetype, framedprotocol, framedipaddress)
> > VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
> > '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
> > '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
> > %{%{integer:Event-Timestamp}:-date('now')},
> > %{%{integer:Event-Timestamp}:-date('now')}, NULL, '0',
> > '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> > '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> > '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
> > }
> > interim-update {
> > query = "UPDATE radacct SET acctupdatetime =
> > %{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0,
> > framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
> > acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
> > %{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId =
> > '%{Acct-Unique-Session-Id}'"
> > }
> > stop {
> > query = "UPDATE radacct SET acctstoptime =
> > %{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets=
> > %{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
> > acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
> > %{%{Acct-Output-Octets}:-0}, acctterminatecause =
> > '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> > AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> > }
> > }
> > }
> > post-auth {
> > reference = ".query"
> > query = "INSERT INTO radpostauth (username, pass, reply,
> > authdate) VALUES ( '%{SQL-User-Name}',
> > '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')"
> > }
> >
More information about the Freeradius-Users
mailing list