Authentication and Rest
Gelinas, Robert
Robert.Gelinas at sbdinc.com
Thu Mar 29 23:07:53 CEST 2018
Matthew:
Thank you very much for the response: I know you guys answer a lot of questions.
I did as you suggested, and moved the rest into inner-tunnel authorization (and the logs show Cleartext-Password returned and recognized); however, the md5 module doesn't seem to see it.
I do apologize for the size of the logs...
------------
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/rest
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/preprocess
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/abfab-tr
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 0.0.0.0/0 {
require_message_authenticator = no
secret = <<< secret >>>
shortname = "all"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration
Support for old-style clients will be removed in a future release
client ::/0 {
require_message_authenticator = no
secret = <<< secret >>>
shortname = "all"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client ::/0. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_rest
# Loading module "rest" from file /etc/freeradius/mods-enabled/rest
rest {
connect_uri = "http://127.0.0.1:38080/"
connect_timeout = 4.000000
}
# Loaded module rlm_date
# Loading module "date" from file /etc/freeradius/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
instantiate {
}
# Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
# Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/certs/server.pem"
certificate_file = "/etc/freeradius/certs/server.pem"
ca_file = "/etc/freeradius/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "pap"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
# Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
# Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "rest" from file /etc/freeradius/mods-enabled/rest
authorize {
uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize"
method = "get"
body = "json"
force_to = "json"
auth = "none"
require_auth = no
timeout = 4.000000
chunk = 0
tls {
check_cert = no
check_cert_cn = no
}
}
authenticate {
uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=authenticate"
method = "get"
body = "json"
force_to = "json"
auth = "none"
require_auth = no
timeout = 4.000000
chunk = 0
tls {
check_cert = no
check_cert_cn = no
}
}
accounting {
uri = "http://127.0.0.1:38080/?user=%{User-Name}&sessions=%{Acct-Unique-Session-ID}"
method = "post"
body = "none"
auth = "none"
require_auth = no
timeout = 4.000000
chunk = 0
tls {
check_cert = no
check_cert_cn = no
}
}
post-auth {
uri = "http://127.0.0.1:38080/?user=%{User-Name}&mac=%{Called-Station-ID}&action=post-auth"
method = "post"
body = "none"
auth = "none"
require_auth = no
timeout = 4.000000
chunk = 0
tls {
check_cert = no
check_cert_cn = no
}
}
rlm_rest: libcurl version: libcurl/7.35.0 OpenSSL/1.0.1f zlib/1.2.8 libidn/1.28 librtmp/2.3
rlm_rest (rest): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_rest (rest): Opening additional connection (0), 1 of 32 pending slots used
rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"
rlm_rest (rest): Opening additional connection (1), 1 of 31 pending slots used
rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"
rlm_rest (rest): Opening additional connection (2), 1 of 30 pending slots used
rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"
rlm_rest (rest): Opening additional connection (3), 1 of 29 pending slots used
rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"
rlm_rest (rest): Opening additional connection (4), 1 of 28 pending slots used
rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"
# Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:336
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 44631
Listening on proxy address :: port 58994
Ready to process requests
(0) Received Access-Request Id 249 from 71.179.189.96:48929 to 172.31.26.65:1812 length 176
(0) User-Name = "testuser"
(0) NAS-IP-Address = 127.0.0.1
(0) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(0) NAS-Port-Type = Wireless-802.11
(0) NAS-Port = 1
(0) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(0) Connect-Info = "CONNECT 54Mbps 802.11a"
(0) Acct-Session-Id = "5A70EF5F-00000011"
(0) Framed-MTU = 1400
(0) EAP-Message = 0x0262000d017465737475736572
(0) Message-Authenticator = 0x23bb14913ffb5879b4329a47225818a4
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) eap: Peer sent EAP Response (code 2) ID 98 length 13
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 99 length 22
(0) eap: EAP session adding &reply:State = 0x041b6c1504786825
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 249 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(0) EAP-Message = 0x016300160410991f6be4ceaaa426886a0cd74f51bbb2
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x041b6c1504786825023c3d5d8ec03057
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 250 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187
(1) User-Name = "testuser"
(1) NAS-IP-Address = 127.0.0.1
(1) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(1) NAS-Port-Type = Wireless-802.11
(1) NAS-Port = 1
(1) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(1) Connect-Info = "CONNECT 54Mbps 802.11a"
(1) Acct-Session-Id = "5A70EF5F-00000011"
(1) Framed-MTU = 1400
(1) EAP-Message = 0x026300060319
(1) State = 0x041b6c1504786825023c3d5d8ec03057
(1) Message-Authenticator = 0xdfdf2dfff6dfc268746fefbf7ef085d7
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) eap: Peer sent EAP Response (code 2) ID 99 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password is available
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x041b6c1504786825
(1) eap: Finished EAP session with state 0x041b6c1504786825
(1) eap: Previous EAP request found for state 0x041b6c1504786825, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 100 length 6
(1) eap: EAP session adding &reply:State = 0x041b6c15057f7525
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 250 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(1) EAP-Message = 0x016400061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x041b6c15057f7525023c3d5d8ec03057
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 251 from 71.179.189.96:48929 to 172.31.26.65:1812 length 356
(2) User-Name = "testuser"
(2) NAS-IP-Address = 127.0.0.1
(2) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(2) NAS-Port-Type = Wireless-802.11
(2) NAS-Port = 1
(2) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(2) Connect-Info = "CONNECT 54Mbps 802.11a"
(2) Acct-Session-Id = "5A70EF5F-00000011"
(2) Framed-MTU = 1400
(2) EAP-Message = 0x026400af1980000000a516030100a00100009c030306feeb60e948c2010910ff80d26459729f284f21506feb0517ba7e9bda585fd800003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01
(2) State = 0x041b6c15057f7525023c3d5d8ec03057
(2) Message-Authenticator = 0x1c00c6ba0670d7117d78372097e08763
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) eap: Peer sent EAP Response (code 2) ID 100 length 175
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x041b6c15057f7525
(2) eap: Finished EAP session with state 0x041b6c15057f7525
(2) eap: Previous EAP request found for state 0x041b6c15057f7525, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 165 bytes
(2) eap_peap: Got complete TLS record (165 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.2 [length 00a0]
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> send TLS 1.2 [length 0039]
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> send TLS 1.2 [length 08d3]
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> send TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> send TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 101 length 1004
(2) eap: EAP session adding &reply:State = 0x041b6c15067e7525
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 251 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(2) EAP-Message = 0x016503ec19c000000a71160303003902000035030368762ddf8ad2c608b3d460b47c93a01a3715aa614d91420362cf29df245002c100c03000000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x041b6c15067e7525023c3d5d8ec03057
(2) Finished request
Waking up in 4.8 seconds.
(3) Received Access-Request Id 252 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187
(3) User-Name = "testuser"
(3) NAS-IP-Address = 127.0.0.1
(3) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(3) NAS-Port-Type = Wireless-802.11
(3) NAS-Port = 1
(3) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(3) Connect-Info = "CONNECT 54Mbps 802.11a"
(3) Acct-Session-Id = "5A70EF5F-00000011"
(3) Framed-MTU = 1400
(3) EAP-Message = 0x026500061900
(3) State = 0x041b6c15067e7525023c3d5d8ec03057
(3) Message-Authenticator = 0xd46cf05dde9a865a6f44898699db503c
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) eap: Peer sent EAP Response (code 2) ID 101 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x041b6c15067e7525
(3) eap: Finished EAP session with state 0x041b6c15067e7525
(3) eap: Previous EAP request found for state 0x041b6c15067e7525, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 102 length 1000
(3) eap: EAP session adding &reply:State = 0x041b6c15077d7525
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 252 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(3) EAP-Message = 0x016603e81940cde3f324ca249bedabd066119c681a573d117ea3022864366f480c80fa575ab23d705108c00198dba38d7f1c53bc178f86b8b688ef094e68e014e70acd43e2430c1bebdb6603f5d4fe0004e8308204e4308203cca0030201020209008e86baf6e55a51bd300d06092a864886f70d01010b
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x041b6c15077d7525023c3d5d8ec03057
(3) Finished request
Waking up in 4.7 seconds.
(4) Received Access-Request Id 253 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187
(4) User-Name = "testuser"
(4) NAS-IP-Address = 127.0.0.1
(4) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(4) NAS-Port-Type = Wireless-802.11
(4) NAS-Port = 1
(4) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(4) Connect-Info = "CONNECT 54Mbps 802.11a"
(4) Acct-Session-Id = "5A70EF5F-00000011"
(4) Framed-MTU = 1400
(4) EAP-Message = 0x026600061900
(4) State = 0x041b6c15077d7525023c3d5d8ec03057
(4) Message-Authenticator = 0x96bddec172376a3325418b922ca65f3a
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) eap: Peer sent EAP Response (code 2) ID 102 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x041b6c15077d7525
(4) eap: Finished EAP session with state 0x041b6c15077d7525
(4) eap: Previous EAP request found for state 0x041b6c15077d7525, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 103 length 691
(4) eap: EAP session adding &reply:State = 0x041b6c15007c7525
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 253 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(4) EAP-Message = 0x016702b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100369b3dc157df2fc2d04eb9f9e4641dfcaf1bc39da12fb47b6e4b70629434ab
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x041b6c15007c7525023c3d5d8ec03057
(4) Finished request
Waking up in 4.6 seconds.
(5) Received Access-Request Id 254 from 71.179.189.96:48929 to 172.31.26.65:1812 length 317
(5) User-Name = "testuser"
(5) NAS-IP-Address = 127.0.0.1
(5) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(5) NAS-Port-Type = Wireless-802.11
(5) NAS-Port = 1
(5) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(5) Connect-Info = "CONNECT 54Mbps 802.11a"
(5) Acct-Session-Id = "5A70EF5F-00000011"
(5) Framed-MTU = 1400
(5) EAP-Message = 0x0267008819800000007e1603030046100000424104efbf2a3d048ae3e88e11f7ef4880365705a9817185f70c0fe9973c848a6f2ca07b45d616190bcf93f41e232a5e97477c0cdcc5f6d8c72f15001b0447763db7a71403030001011603030028000000000000000064d335a11a027376b57b84aca00132
(5) State = 0x041b6c15007c7525023c3d5d8ec03057
(5) Message-Authenticator = 0x1be28f5681201b7e839ff13a6beea0d1
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) eap: Peer sent EAP Response (code 2) ID 103 length 136
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x041b6c15007c7525
(5) eap: Finished EAP session with state 0x041b6c15007c7525
(5) eap: Previous EAP request found for state 0x041b6c15007c7525, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(5) eap_peap: Got complete TLS record (126 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.2 [length 0046]
(5) eap_peap: TLS_accept: SSLv3 read client key exchange A
(5) eap_peap: <<< recv TLS 1.2 [length 0001]
(5) eap_peap: <<< recv TLS 1.2 [length 0010]
(5) eap_peap: TLS_accept: SSLv3 read finished A
(5) eap_peap: >>> send TLS 1.2 [length 0001]
(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap: >>> send TLS 1.2 [length 0010]
(5) eap_peap: TLS_accept: SSLv3 write finished A
(5) eap_peap: TLS_accept: SSLv3 flush data
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 104 length 57
(5) eap: EAP session adding &reply:State = 0x041b6c1501737525
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 254 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(5) EAP-Message = 0x01680039190014030300010116030300285f6ee4e8a440118e913873fff7f5a910707cc4609ef5e9aeef9f7b7242a350e482da638bf3c07c86
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x041b6c1501737525023c3d5d8ec03057
(5) Finished request
Waking up in 4.4 seconds.
(6) Received Access-Request Id 255 from 71.179.189.96:48929 to 172.31.26.65:1812 length 187
(6) User-Name = "testuser"
(6) NAS-IP-Address = 127.0.0.1
(6) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(6) NAS-Port-Type = Wireless-802.11
(6) NAS-Port = 1
(6) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(6) Connect-Info = "CONNECT 54Mbps 802.11a"
(6) Acct-Session-Id = "5A70EF5F-00000011"
(6) Framed-MTU = 1400
(6) EAP-Message = 0x026800061900
(6) State = 0x041b6c1501737525023c3d5d8ec03057
(6) Message-Authenticator = 0x4169f50796258cfa8bca5fa8860a6fe8
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) eap: Peer sent EAP Response (code 2) ID 104 length 6
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x041b6c1501737525
(6) eap: Finished EAP session with state 0x041b6c1501737525
(6) eap: Previous EAP request found for state 0x041b6c1501737525, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 105 length 40
(6) eap: EAP session adding &reply:State = 0x041b6c1502727525
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 255 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(6) EAP-Message = 0x016900281900170303001d5f6ee4e8a440118f6ae961fe58faae37d0308425f3f334891e1669857e
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x041b6c1502727525023c3d5d8ec03057
(6) Finished request
Waking up in 4.4 seconds.
(7) Received Access-Request Id 0 from 71.179.189.96:48929 to 172.31.26.65:1812 length 225
(7) User-Name = "testuser"
(7) NAS-IP-Address = 127.0.0.1
(7) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(7) NAS-Port-Type = Wireless-802.11
(7) NAS-Port = 1
(7) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(7) Connect-Info = "CONNECT 54Mbps 802.11a"
(7) Acct-Session-Id = "5A70EF5F-00000011"
(7) Framed-MTU = 1400
(7) EAP-Message = 0x0269002c19001703030021000000000000000178aba074d31f98dbc7c329e6bb4c900e20ec12214c575c9c40
(7) State = 0x041b6c1502727525023c3d5d8ec03057
(7) Message-Authenticator = 0x16348adb05cf8664bc16ac2cb7c06bfc
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) eap: Peer sent EAP Response (code 2) ID 105 length 44
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x041b6c1502727525
(7) eap: Finished EAP session with state 0x041b6c1502727525
(7) eap: Previous EAP request found for state 0x041b6c1502727525, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - testuser
(7) eap_peap: Got inner identity 'testuser'
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message = 0x0269000d017465737475736572
(7) eap_peap: Setting User-Name to testuser
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message = 0x0269000d017465737475736572
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "testuser"
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x0269000d017465737475736572
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "testuser"
(7) WARNING: Outer and inner identities are the same. User privacy is compromised.
(7) server inner-tunnel {
(7) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
rlm_rest (rest): Reserved connection (0)
(7) rest: Expanding URI components
(7) rest: EXPAND http://127.0.0.1:38080
(7) rest: --> http://127.0.0.1:38080
(7) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize
(7) rest: --> /?user=testuser&mac=&action=authorize
(7) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=&action=authorize"
(7) rest: Processing response header
(7) rest: Status : 200 (OK)
(7) rest: Parsing attribute "Cleartext-Password"
(7) rest: EXPAND xxx
(7) rest: --> xxx
(7) rest: Cleartext-Password := "xxx"
rlm_rest (rest): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_rest (rest): Opening additional connection (5), 1 of 27 pending slots used
rlm_rest (rest): Connecting to "http://127.0.0.1:38080/"
(7) [rest] = updated
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 105 length 13
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_md5 to process data
(7) eap_md5: Issuing MD5 Challenge
(7) eap: Sending EAP Request (code 1) ID 106 length 22
(7) eap: EAP session adding &reply:State = 0x7c4023477c2a2753
(7) [eap] = handled
(7) } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) Cleartext-Password = "xxx"
(7) EAP-Message = 0x016a00160410e411cdc5114ec10697a41831bfe62c70
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x7c4023477c2a2753eb67ed055b591745
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap: Cleartext-Password = "xxx"
(7) eap_peap: EAP-Message = 0x016a00160410e411cdc5114ec10697a41831bfe62c70
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0x7c4023477c2a2753eb67ed055b591745
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap: Cleartext-Password = "xxx"
(7) eap_peap: EAP-Message = 0x016a00160410e411cdc5114ec10697a41831bfe62c70
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0x7c4023477c2a2753eb67ed055b591745
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 106 length 53
(7) eap: EAP session adding &reply:State = 0x041b6c1503717525
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 0 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(7) EAP-Message = 0x016a00351900170303002a5f6ee4e8a4401190f69b2bd50aa115d064d762249cbeba5a84a5b06f3602e7482572c4a43aee36706c07
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x041b6c1503717525023c3d5d8ec03057
(7) Finished request
Waking up in 4.3 seconds.
(8) Received Access-Request Id 1 from 71.179.189.96:48929 to 172.31.26.65:1812 length 234
(8) User-Name = "testuser"
(8) NAS-IP-Address = 127.0.0.1
(8) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(8) NAS-Port-Type = Wireless-802.11
(8) NAS-Port = 1
(8) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(8) Connect-Info = "CONNECT 54Mbps 802.11a"
(8) Acct-Session-Id = "5A70EF5F-00000011"
(8) Framed-MTU = 1400
(8) EAP-Message = 0x026a00351900170303002a00000000000000027af6e11e273623fa87fe0fdbda98e68a8af862d57fad52cb240c8790db90b1bd8018
(8) State = 0x041b6c1503717525023c3d5d8ec03057
(8) Message-Authenticator = 0xe87e4305d6a5725d5eeb709549e46506
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) eap: Peer sent EAP Response (code 2) ID 106 length 53
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x7c4023477c2a2753
(8) eap: Finished EAP session with state 0x041b6c1503717525
(8) eap: Previous EAP request found for state 0x041b6c1503717525, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MD5 (4)
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x026a00160410052730cd2ce584de9f0445db7f81eb23
(8) eap_peap: Setting User-Name to testuser
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x026a00160410052730cd2ce584de9f0445db7f81eb23
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "testuser"
(8) eap_peap: State = 0x7c4023477c2a2753eb67ed055b591745
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x026a00160410052730cd2ce584de9f0445db7f81eb23
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "testuser"
(8) State = 0x7c4023477c2a2753eb67ed055b591745
(8) WARNING: Outer and inner identities are the same. User privacy is compromised.
(8) server inner-tunnel {
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
rlm_rest (rest): Reserved connection (1)
(8) rest: Expanding URI components
(8) rest: EXPAND http://127.0.0.1:38080
(8) rest: --> http://127.0.0.1:38080
(8) rest: EXPAND /?user=%{User-Name}&mac=%{Called-Station-ID}&action=authorize
(8) rest: --> /?user=testuser&mac=&action=authorize
(8) rest: Sending HTTP GET to "http://127.0.0.1:38080/?user=testuser&mac=&action=authorize"
(8) rest: Processing response header
(8) rest: Status : 200 (OK)
(8) rest: Parsing attribute "Cleartext-Password"
(8) rest: EXPAND xxx
(8) rest: --> xxx
(8) rest: Cleartext-Password := "xxx"
rlm_rest (rest): Released connection (1)
(8) [rest] = updated
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) &Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 106 length 22
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [files] = noop
(8) [expiration] = noop
(8) [logintime] = noop
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(8) authenticate {
(8) eap: Expiring EAP session with state 0x7c4023477c2a2753
(8) eap: Finished EAP session with state 0x7c4023477c2a2753
(8) eap: Previous EAP request found for state 0x7c4023477c2a2753, released from the list
(8) eap: Peer sent packet with method EAP MD5 (4)
(8) eap: Calling submodule eap_md5 to process data
(8) eap_md5: ERROR: Cleartext-Password is required for EAP-MD5 authentication
(8) eap: ERROR: Failed continuing EAP MD5 (4) session. EAP sub-module failed
(8) eap: Sending EAP Failure (code 4) ID 106 length 4
(8) eap: Failed in EAP select
(8) [eap] = invalid
(8) } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel
(8) Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject: --> testuser
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8) [attr_filter.access_reject] = updated
(8) update outer.session-state {
(8) &Module-Failure-Message := &request:Module-Failure-Message -> 'eap_md5: Cleartext-Password is required for EAP-MD5 authentication'
(8) } # update outer.session-state = noop
(8) } # Post-Auth-Type REJECT = updated
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) EAP-Message = 0x046a0004
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply code 3
(8) eap_peap: EAP-Message = 0x046a0004
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply RADIUS code 3
(8) eap_peap: EAP-Message = 0x046a0004
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Tunneled authentication was rejected
(8) eap_peap: FAILURE
(8) eap: Sending EAP Request (code 1) ID 107 length 46
(8) eap: EAP session adding &reply:State = 0x041b6c150c707525
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) Challenge { ... } # empty sub-section is ignored
(8) session-state: Saving cached attributes
(8) Module-Failure-Message := "eap_md5: Cleartext-Password is required for EAP-MD5 authentication"
(8) Sent Access-Challenge Id 1 from 172.31.26.65:1812 to 71.179.189.96:48929 length 0
(8) EAP-Message = 0x016b002e190017030300235f6ee4e8a440119139940b79ea1039c16821646a4b93ea204b5ecfc784a1434fdee304
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x041b6c150c707525023c3d5d8ec03057
(8) Finished request
Waking up in 4.2 seconds.
(9) Received Access-Request Id 2 from 71.179.189.96:48929 to 172.31.26.65:1812 length 227
(9) User-Name = "testuser"
(9) NAS-IP-Address = 127.0.0.1
(9) Called-Station-Id = "02-F0-21-36-26-62:radtest"
(9) NAS-Port-Type = Wireless-802.11
(9) NAS-Port = 1
(9) Calling-Station-Id = "FC-DB-B3-D8-B2-A9"
(9) Connect-Info = "CONNECT 54Mbps 802.11a"
(9) Acct-Session-Id = "5A70EF5F-00000011"
(9) Framed-MTU = 1400
(9) EAP-Message = 0x026b002e190017030300230000000000000003c5d0c90e3297625c4dce4a6009e6fc9df299edfa7e2333b12b33a9
(9) State = 0x041b6c150c707525023c3d5d8ec03057
(9) Message-Authenticator = 0xa5d529a07b0a2a688e1ececb19906b8c
(9) Restoring &session-state
(9) &session-state:Module-Failure-Message := "eap_md5: Cleartext-Password is required for EAP-MD5 authentication"
(9) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) eap: Peer sent EAP Response (code 2) ID 107 length 46
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0x041b6c150c707525
(9) eap: Finished EAP session with state 0x041b6c150c707525
(9) eap: Previous EAP request found for state 0x041b6c150c707525, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv failure
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.)
(9) eap_peap: This means you need to read the PREVIOUS messages in the debug output
(9) eap_peap: to find out the reason why the user was rejected
(9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
(9) eap_peap: what went wrong, and how to fix the problem
(9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
(9) eap: Sending EAP Failure (code 4) ID 107 length 4
(9) eap: Failed in EAP select
(9) [eap] = invalid
(9) } # authenticate = invalid
(9) Failed to authenticate the user
(9) Using Post-Auth-Type Reject
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9) Post-Auth-Type REJECT {
(9) attr_filter.access_reject: EXPAND %{User-Name}
(9) attr_filter.access_reject: --> testuser
(9) attr_filter.access_reject: Matched entry DEFAULT at line 11
(9) [attr_filter.access_reject] = updated
(9) [eap] = noop
(9) policy remove_reply_message_if_eap {
(9) if (&reply:EAP-Message && &reply:Reply-Message) {
(9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(9) else {
(9) [noop] = noop
(9) } # else = noop
(9) } # policy remove_reply_message_if_eap = noop
(9) } # Post-Auth-Type REJECT = updated
(9) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(9) Sending delayed response
(9) Sent Access-Reject Id 2 from 172.31.26.65:1812 to 71.179.189.96:48929 length 44
(9) EAP-Message = 0x046b0004
(9) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.1 seconds.
(0) Cleaning up request packet ID 249 with timestamp +43
(1) Cleaning up request packet ID 250 with timestamp +43
(2) Cleaning up request packet ID 251 with timestamp +43
(3) Cleaning up request packet ID 252 with timestamp +43
(4) Cleaning up request packet ID 253 with timestamp +43
Waking up in 0.1 seconds.
(5) Cleaning up request packet ID 254 with timestamp +43
(6) Cleaning up request packet ID 255 with timestamp +44
(7) Cleaning up request packet ID 0 with timestamp +44
(8) Cleaning up request packet ID 1 with timestamp +44
(9) Cleaning up request packet ID 2 with timestamp +44
Ready to process requests
________________________________
From: Freeradius-Users <freeradius-users-bounces+robert.gelinas=sbdinc.com at lists.freeradius.org> on behalf of Matthew Newton <mcn at freeradius.org>
Sent: Tuesday, March 27, 2018 8:00 PM
To: freeradius-users at lists.freeradius.org
Subject: Re: Authentication and Rest
*External Message, please be cautious.*
On Tue, 2018-03-27 at 22:21 +0000, Gelinas, Robert wrote:
> I have a problem with authenticating after a RESTful auth. The
> response from the rest call seems to be integrating (free radius is
> expanding the response), but the Cleartext-Password doesn't seem to
> be carrying forward to the authentication portion.
You're calling rest in the outer "default" server.
> There are a lot more 'authorize/authenticate' call sets than I
> expected,
PEAP is like that...
> but in the end, I expected things to resolve; however, they fail with
> 'no Cleartext-Password' error message in the MD5 portion.
You haven't got the Cleartest-Password attribute in the inner-tunnel;
it's in the outer.
Move "rest" from the default server to the inner-tunnel virtual server.
You'll also save a lot of load on your REST server by only querying it
once, rather than every EAP round-trip.
--
Matthew
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Support & Services<http://www.freeradius.org/list/users.html>
www.freeradius.org
The world's leading RADIUS server. The project includes a GPL AAA server, BSD licensed client and PAM and Apache modules. Full support is available from NetworkRADIUS.
More information about the Freeradius-Users
mailing list