Not Receiving radreply Attribute set for user in Access-Accept Freeradius3.0
Uchenna Nebedum
nebeduch at gmail.com
Thu May 31 14:49:51 CEST 2018
Thanks, is that why it's not sending the reply attribute in the
Access-Accept packet?
On Thu, May 31, 2018, 13:17 Alan Buxey <alan.buxey at gmail.com> wrote:
> hi,
>
> Mikrotik-Rate-Limit == "1024k/1024k"
>
> you probably want
>
> Mikrotik-Rate-Limit := "1024k/1024k"
>
> alan
>
> On 31 May 2018 at 12:35, Uchenna Nebedum <nebeduch at gmail.com> wrote:
>
> > Good Day all,
> >
> > I'm new to FreeRadius and radius in general.
> > I set up a freeradius3.0 server on my ubuntu18.04 machine
> > I created a few users and and gave them radcheck and radreply attributes
> > but when i test the users with radtest, In the Access-Accept message the
> > reply attributes are not included
> > here's the debug output
> > Thanks a lot for any help at all
> >
> >
> > The Request
> > radtest F0:3D:03:EC:42:66 F0:3D:03:EC:42:66 localhost 1812 testing123
> > Sent Access-Request Id 64 from 0.0.0.0:42592 to 127.0.0.1:1812 length
> 103
> > User-Name = "F0:3D:03:EC:42:66"
> > User-Password = "F0:3D:03:EC:42:66"
> > NAS-IP-Address = 127.0.1.1
> > NAS-Port = 1812
> > Message-Authenticator = 0x00
> > Cleartext-Password = "F0:3D:03:EC:42:66"
> > Received Access-Accept Id 64 from 127.0.0.1:1812 to 0.0.0.0:0 length 20
> >
> >
> > FreeRADIUS Version 3.0.16
> > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE
> > You may redistribute copies of FreeRADIUS under the terms of the
> > GNU General Public License
> > For more information about these matters, see the file named COPYRIGHT
> > Starting - reading configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary
> > including dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/freeradius/3.0/dictionary
> > including configuration file /etc/freeradius/3.0/radiusd.conf
> > including configuration file /etc/freeradius/3.0/proxy.conf
> > including configuration file /etc/freeradius/3.0/clients.conf
> > including files in directory /etc/freeradius/3.0/mods-enabled/
> > including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> > including configuration file /etc/freeradius/3.0/mods-enabled/realm
> > including configuration file /etc/freeradius/3.0/mods-enabled/soh
> > including configuration file /etc/freeradius/3.0/mods-enabled/digest
> > including configuration file /etc/freeradius/3.0/mods-enabled/expr
> > including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> > including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> > including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> > including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> > including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> > including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/echo
> > including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> > including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> > including configuration file /etc/freeradius/3.0/mods-enabled/always
> > including configuration file /etc/freeradius/3.0/mods-enabled/exec
> > including configuration file /etc/freeradius/3.0/mods-enabled/files
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> > including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> > including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/chap
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail
> > including configuration file /etc/freeradius/3.0/mods-enabled/pap
> > including configuration file /etc/freeradius/3.0/mods-enabled/eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/sql
> > including configuration file
> > /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
> > including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/unix
> > including files in directory /etc/freeradius/3.0/policy.d/
> > including configuration file /etc/freeradius/3.0/policy.d/debug
> > including configuration file
> > /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> > including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> > including configuration file
> /etc/freeradius/3.0/policy.d/canonicalization
> > including configuration file /etc/freeradius/3.0/policy.d/filter
> > including configuration file /etc/freeradius/3.0/policy.d/accounting
> > including configuration file /etc/freeradius/3.0/policy.d/operator-name
> > including configuration file /etc/freeradius/3.0/policy.d/dhcp
> > including configuration file /etc/freeradius/3.0/policy.d/control
> > including configuration file /etc/freeradius/3.0/policy.d/cui
> > including configuration file /etc/freeradius/3.0/policy.d/eap
> > including files in directory /etc/freeradius/3.0/sites-enabled/
> > including configuration file /etc/freeradius/3.0/sites-enabled/default
> > including configuration file /etc/freeradius/3.0/sites-
> > enabled/inner-tunnel
> > main {
> > security {
> > user = "freerad"
> > group = "freerad"
> > allow_core_dumps = no
> > }
> > name = "freeradius"
> > prefix = "/usr"
> > localstatedir = "/var"
> > logdir = "/var/log/freeradius"
> > run_dir = "/var/run/freeradius"
> > }
> > main {
> > name = "freeradius"
> > prefix = "/usr"
> > localstatedir = "/var"
> > sbindir = "/usr/sbin"
> > logdir = "/var/log/freeradius"
> > run_dir = "/var/run/freeradius"
> > libdir = "/usr/lib/freeradius"
> > radacctdir = "/var/log/freeradius/radacct"
> > hostname_lookups = no
> > max_request_time = 30
> > cleanup_delay = 5
> > max_requests = 16384
> > pidfile = "/var/run/freeradius/freeradius.pid"
> > checkrad = "/usr/sbin/checkrad"
> > debug_level = 0
> > proxy_requests = yes
> > log {
> > stripped_names = no
> > auth = yes
> > auth_badpass = yes
> > auth_goodpass = yes
> > colourise = yes
> > msg_denied = "You are already logged in - access denied"
> > }
> > resources {
> > }
> > security {
> > max_attributes = 200
> > reject_delay = 1.000000
> > status_server = yes
> > }
> > }
> > radiusd: #### Loading Realms and Home Servers ####
> > proxy server {
> > retry_delay = 5
> > retry_count = 3
> > default_fallback = no
> > dead_time = 120
> > wake_all_if_all_dead = no
> > }
> > home_server localhost {
> > ipaddr = 127.0.0.1
> > port = 1812
> > type = "auth"
> > secret = <<< secret >>>
> > response_window = 20.000000
> > response_timeouts = 1
> > max_outstanding = 65536
> > zombie_period = 40
> > status_check = "status-server"
> > ping_interval = 30
> > check_interval = 30
> > check_timeout = 4
> > num_answers_to_alive = 3
> > revive_interval = 120
> > limit {
> > max_connections = 16
> > max_requests = 0
> > lifetime = 0
> > idle_timeout = 0
> > }
> > coa {
> > irt = 2
> > mrt = 16
> > mrc = 5
> > mrd = 30
> > }
> > }
> > home_server_pool my_auth_failover {
> > type = fail-over
> > home_server = localhost
> > }
> > realm example.com {
> > auth_pool = my_auth_failover
> > }
> > realm LOCAL {
> > }
> > radiusd: #### Loading Clients ####
> > client localhost {
> > ipaddr = 127.0.0.1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > nas_type = "other"
> > proto = "*"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > client localhost_ipv6 {
> > ipv6addr = ::1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > Debugger not attached
> > # Creating Auth-Type = mschap
> > # Creating Auth-Type = digest
> > # Creating Auth-Type = eap
> > # Creating Auth-Type = PAP
> > # Creating Auth-Type = CHAP
> > # Creating Auth-Type = MS-CHAP
> > radiusd: #### Instantiating modules ####
> > modules {
> > # Loaded module rlm_preprocess
> > # Loading module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > preprocess {
> > huntgroups =
> "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> > hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> > with_ascend_hack = no
> > ascend_channels_per_line = 23
> > with_ntdomain_hack = no
> > with_specialix_jetstream_hack = no
> > with_cisco_vsa_hack = no
> > with_alvarion_vsa_hack = no
> > }
> > # Loaded module rlm_realm
> > # Loading module "IPASS" from file /etc/freeradius/3.0/mods-
> > enabled/realm
> > realm IPASS {
> > format = "prefix"
> > delimiter = "/"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "suffix" from file /etc/freeradius/3.0/mods-
> > enabled/realm
> > realm suffix {
> > format = "suffix"
> > delimiter = "@"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm realmpercent {
> > format = "suffix"
> > delimiter = "%"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm ntdomain {
> > format = "prefix"
> > delimiter = "\\"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loaded module rlm_soh
> > # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> > soh {
> > dhcp = yes
> > }
> > # Loaded module rlm_digest
> > # Loading module "digest" from file
> > /etc/freeradius/3.0/mods-enabled/digest
> > # Loaded module rlm_expr
> > # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> > expr {
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > }
> > # Loaded module rlm_replicate
> > # Loading module "replicate" from file
> > /etc/freeradius/3.0/mods-enabled/replicate
> > # Loaded module rlm_utf8
> > # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> > # Loaded module rlm_exec
> > # Loading module "ntlm_auth" from file
> > /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > exec ntlm_auth {
> > wait = yes
> > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> > --username=%{mschap:User-Name} --password=%{User-Password}"
> > shell_escape = yes
> > }
> > # Loaded module rlm_linelog
> > # Loading module "linelog" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > linelog {
> > filename = "/var/log/freeradius/linelog"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = "This is a log message for %{User-Name}"
> > reference = "messages.%{%{reply:Packet-Type}:-default}"
> > }
> > # Loading module "log_accounting" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > linelog log_accounting {
> > filename = "/var/log/freeradius/linelog-accounting"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = ""
> > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> > }
> > # Loaded module rlm_passwd
> > # Loading module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> > passwd etc_passwd {
> > filename = "/etc/passwd"
> > format = "*User-Name:Crypt-Password:"
> > delimiter = ":"
> > ignore_nislike = no
> > ignore_empty = yes
> > allow_multiple_keys = no
> > hash_size = 100
> > }
> > # Loaded module rlm_mschap
> > # Loading module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> > mschap {
> > use_mppe = yes
> > require_encryption = no
> > require_strong = no
> > with_ntdomain_hack = yes
> > passchange {
> > }
> > allow_retry = yes
> > winbind_retry_with_normalised_username = no
> > }
> > # Loaded module rlm_radutmp
> > # Loading module "sradutmp" from file
> > /etc/freeradius/3.0/mods-enabled/sradutmp
> > radutmp sradutmp {
> > filename = "/var/log/freeradius/sradutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 420
> > caller_id = no
> > }
> > # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> > exec echo {
> > wait = yes
> > program = "/bin/echo %{User-Name}"
> > input_pairs = "request"
> > output_pairs = "reply"
> > shell_escape = yes
> > }
> > # Loaded module rlm_expiration
> > # Loading module "expiration" from file
> > /etc/freeradius/3.0/mods-enabled/expiration
> > # Loaded module rlm_attr_filter
> > # Loading module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.post-proxy {
> > filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.pre-proxy {
> > filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.access_reject {
> > filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_
> > reject"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.access_challenge {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.accounting_response {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loaded module rlm_always
> > # Loading module "reject" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always reject {
> > rcode = "reject"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "fail" from file /etc/freeradius/3.0/mods-
> > enabled/always
> > always fail {
> > rcode = "fail"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> > always ok {
> > rcode = "ok"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "handled" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always handled {
> > rcode = "handled"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "invalid" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always invalid {
> > rcode = "invalid"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "userlock" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always userlock {
> > rcode = "userlock"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "notfound" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always notfound {
> > rcode = "notfound"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "noop" from file /etc/freeradius/3.0/mods-
> > enabled/always
> > always noop {
> > rcode = "noop"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "updated" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always updated {
> > rcode = "updated"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> > exec {
> > wait = no
> > input_pairs = "request"
> > shell_escape = yes
> > timeout = 10
> > }
> > # Loaded module rlm_files
> > # Loading module "files" from file /etc/freeradius/3.0/mods-
> > enabled/files
> > files {
> > filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> > acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> > preproxy_usersfile = "/etc/freeradius/3.0/mods-
> > config/files/pre-proxy"
> > }
> > # Loaded module rlm_dynamic_clients
> > # Loading module "dynamic_clients" from file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > # Loaded module rlm_unpack
> > # Loading module "unpack" from file
> > /etc/freeradius/3.0/mods-enabled/unpack
> > # Loaded module rlm_logintime
> > # Loading module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> > logintime {
> > minimum_timeout = 60
> > }
> > # Loaded module rlm_cache
> > # Loading module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > cache cache_eap {
> > driver = "rlm_cache_rbtree"
> > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> > ttl = 15
> > max_entries = 0
> > epoch = 0
> > add_stats = no
> > }
> > # Loaded module rlm_chap
> > # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> > # Loaded module rlm_detail
> > # Loading module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail auth_log {
> > filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail reply_log {
> > filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail pre_proxy_log {
> > filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail post_proxy_log {
> > filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> > detail {
> > filename =
> > "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{
> > Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_pap
> > # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> > pap {
> > normalise = yes
> > }
> > # Loaded module rlm_eap
> > # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> > eap {
> > default_eap_type = "md5"
> > timer_expire = 60
> > ignore_unknown_eap_types = no
> > cisco_accounting_username_bug = no
> > max_sessions = 16384
> > }
> > # Loaded module rlm_sql
> > # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> > sql {
> > driver = "rlm_sql_mysql"
> > server = "localhost"
> > port = 3306
> > login = "root"
> > password = <<< secret >>>
> > radius_db = "radius"
> > read_groups = yes
> > read_profiles = yes
> > read_clients = yes
> > delete_stale_sessions = yes
> > sql_user_name = "%{User-Name}"
> > default_user_profile = ""
> > client_query = "SELECT id, nasname, shortname, type, secret, server
> > FROM nas"
> > authorize_check_query = "SELECT id, username, attribute, value, op
> > FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > authorize_reply_query = "SELECT id, username, attribute, value, op
> > FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> > authorize_group_check_query = "SELECT id, groupname, attribute,
> > Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY
> id"
> > authorize_group_reply_query = "SELECT id, groupname, attribute,
> > value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY
> id"
> > group_membership_query = "SELECT groupname FROM radusergroup WHERE
> > username = '%{SQL-User-Name}' ORDER BY priority"
> > simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> > '%{SQL-User-Name}' AND acctstoptime IS NULL"
> > simul_verify_query = "SELECT radacctid, acctsessionid, username,
> > nasipaddress, nasportid, framedipaddress, callingstationid,
> framedprotocol
> > FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
> NULL"
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> > accounting {
> > reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> > type {
> > accounting-on {
> > query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> > }
> > accounting-off {
> > query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> > }
> > start {
> > query = "INSERT INTO radacct (acctsessionid,
> > acctuniqueid, username, realm, nasipaddress,nasportid,
> > nasporttype, acctstarttime, acctupdatetime, acctstoptime,
> > acctsessiontime, acctauthentic, connectinfo_start,
> > connectinfo_stop, acctinputoctets, acctoutputoctets,
> > calledstationid, callingstationid, acctterminatecause,servicetype,
> > framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> > '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> > '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
> '%{NAS-Port-Type}',
> > FROM_UNIXTIME(%{integer:Event-Timestamp}),
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
> '%{Acct-Authentic}',
> > '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
> > '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
> > '%{Framed-IP-Address}')"
> > }
> > interim-update {
> > query = "UPDATE radacct SET acctupdatetime =
> > (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval =
> > %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> > framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> > '%{Acct-Unique-Session-Id}'"
> > }
> > stop {
> > query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> > '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> > AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> > }
> > }
> > }
> > post-auth {
> > reference = ".query"
> > query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> > VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')"
> > }
> > }
> > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> > linked
> > Creating attribute SQL-Group
> > # Loading module "radutmp" from file
> > /etc/freeradius/3.0/mods-enabled/radutmp
> > radutmp {
> > filename = "/var/log/freeradius/radutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 384
> > caller_id = yes
> > }
> > # Loaded module rlm_unix
> > # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> > unix {
> > radwtmp = "/var/log/freeradius/radwtmp"
> > }
> > Creating attribute Unix-Group
> > instantiate {
> > }
> > # Instantiating module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > reading pairlist file /etc/freeradius/3.0/mods-
> > config/preprocess/huntgroups
> > reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> > # Instantiating module "IPASS" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "suffix" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "linelog" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > # Instantiating module "log_accounting" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > # Instantiating module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> > # Instantiating module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> > rlm_mschap (mschap): using internal authentication
> > # Instantiating module "expiration" from file
> > /etc/freeradius/3.0/mods-enabled/expiration
> > # Instantiating module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/3.0/mods-
> > config/attr_filter/post-proxy
> > # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/3.0/mods-
> > config/attr_filter/pre-proxy
> > # Instantiating module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> > "DEFAULT".
> > # Instantiating module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> > # Instantiating module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> > # Instantiating module "reject" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "fail" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "ok" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "handled" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "invalid" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "userlock" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "notfound" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "noop" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "updated" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "files" from file
> > /etc/freeradius/3.0/mods-enabled/files
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> > # Instantiating module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> > # Instantiating module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> > loaded and linked
> > # Instantiating module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> > # Instantiating module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > # Instantiating module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > # Instantiating module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > # Instantiating module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> > # Instantiating module "pap" from file
> > /etc/freeradius/3.0/mods-enabled/pap
> > # Instantiating module "eap" from file
> > /etc/freeradius/3.0/mods-enabled/eap
> > # Linked to sub-module rlm_eap_md5
> > # Linked to sub-module rlm_eap_leap
> > # Linked to sub-module rlm_eap_gtc
> > gtc {
> > challenge = "Password: "
> > auth_type = "PAP"
> > }
> > # Linked to sub-module rlm_eap_tls
> > tls {
> > tls = "tls-common"
> > }
> > tls-config tls-common {
> > verify_depth = 0
> > ca_path = "/etc/freeradius/3.0/certs"
> > pem_file_type = yes
> > private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> > certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> > ca_file = "/etc/ssl/certs/ca-certificates.crt"
> > private_key_password = <<< secret >>>
> > dh_file = "/etc/freeradius/3.0/certs/dh"
> > fragment_size = 1024
> > include_length = yes
> > auto_chain = yes
> > check_crl = no
> > check_all_crl = no
> > cipher_list = "DEFAULT"
> > cipher_server_preference = no
> > ecdh_curve = "prime256v1"
> > tls_max_version = ""
> > tls_min_version = "1.0"
> > cache {
> > enable = no
> > lifetime = 24
> > max_entries = 255
> > }
> > verify {
> > skip_if_ocsp_ok = no
> > }
> > ocsp {
> > enable = no
> > override_cert_url = yes
> > url = "http://127.0.0.1/ocsp/"
> > use_nonce = yes
> > timeout = 0
> > softfail = no
> > }
> > }
> > tls: Unable to set DH parameters. DH cipher suites may not work!
> > tls: Fix this by running the OpenSSL command listed in eap.conf
> > # Linked to sub-module rlm_eap_ttls
> > ttls {
> > tls = "tls-common"
> > default_eap_type = "md5"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > virtual_server = "inner-tunnel"
> > include_length = yes
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_peap
> > peap {
> > tls = "tls-common"
> > default_eap_type = "mschapv2"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > proxy_tunneled_request_as_eap = yes
> > virtual_server = "inner-tunnel"
> > soh = no
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_mschapv2
> > mschapv2 {
> > with_ntdomain_hack = no
> > send_error = no
> > }
> > # Instantiating module "sql" from file
> > /etc/freeradius/3.0/mods-enabled/sql
> > rlm_sql_mysql: libmysql version: 5.7.22
> > mysql {
> > tls {
> > }
> > warnings = "auto"
> > }
> > rlm_sql (sql): Attempting to connect to database "radius"
> > rlm_sql (sql): Initialising connection pool
> > pool {
> > start = 5
> > min = 3
> > max = 32
> > spare = 10
> > uses = 0
> > lifetime = 0
> > cleanup_interval = 30
> > idle_timeout = 60
> > retry_delay = 30
> > spread = no
> > }
> > rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > rlm_sql (sql): Processing generate_sql_clients
> > rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
> > shortname, type, secret, server FROM nas
> > rlm_sql (sql): Reserved connection (0)
> > rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
> type,
> > secret, server FROM nas
> > rlm_sql (sql): Adding client 192.168.1.14 (mikrotik2) to global clients
> > list
> > rlm_sql (192.168.1.14): Client "mikrotik2" (sql) added
> > rlm_sql (sql): Adding client 0.0.0.0/0 (mikrotik) to global clients list
> > rlm_sql (0.0.0.0): Client "mikrotik" (sql) added
> > rlm_sql (sql): Released connection (0)
> > Need 5 more connections to reach 10 spares
> > rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > } # modules
> > radiusd: #### Loading Virtual Servers ####
> > server { # from file /etc/freeradius/3.0/radiusd.conf
> > } # server
> > server default { # from file /etc/freeradius/3.0/sites-enabled/default
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > Ignoring "ldap" (see raddb/mods-available/README.rst)
> > # Loading preacct {...}
> > # Loading accounting {...}
> > # Loading session {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > } # server default
> > server inner-tunnel { # from file
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > # Loading session {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > # Skipping contents of 'if' as it is always 'false' --
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
> > } # server inner-tunnel
> > radiusd: #### Opening IP addresses and Ports ####
> > listen {
> > type = "auth"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "acct"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "auth"
> > ipv6addr = ::
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "acct"
> > ipv6addr = ::
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "auth"
> > ipaddr = 127.0.0.1
> > port = 18120
> > }
> > Listening on auth address * port 1812 bound to server default
> > Listening on acct address * port 1813 bound to server default
> > Listening on auth address :: port 1812 bound to server default
> > Listening on acct address :: port 1813 bound to server default
> > Listening on auth address 127.0.0.1 port 18120 bound to server
> inner-tunnel
> > Listening on proxy address * port 54602
> > Listening on proxy address :: port 48431
> > Ready to process requests
> > (0) Received Access-Request Id 64 from 127.0.0.1:42592 to 127.0.0.1:1812
> > length 103
> > (0) User-Name = "F0:3D:03:EC:42:66"
> > (0) User-Password = "F0:3D:03:EC:42:66"
> > (0) NAS-IP-Address = 127.0.1.1
> > (0) NAS-Port = 1812
> > (0) Message-Authenticator = 0xf1a8ad6de2109c0ddecb3f456032ab0e
> > (0) # Executing section authorize from file
> > /etc/freeradius/3.0/sites-enabled/default
> > (0) authorize {
> > (0) policy filter_username {
> > (0) if (&User-Name) {
> > (0) if (&User-Name) -> TRUE
> > (0) if (&User-Name) {
> > (0) if (&User-Name =~ / /) {
> > (0) if (&User-Name =~ / /) -> FALSE
> > (0) if (&User-Name =~ /@[^@]*@/ ) {
> > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (0) if (&User-Name =~ /\.\./ ) {
> > (0) if (&User-Name =~ /\.\./ ) -> FALSE
> > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> ->
> > FALSE
> > (0) if (&User-Name =~ /\.$/) {
> > (0) if (&User-Name =~ /\.$/) -> FALSE
> > (0) if (&User-Name =~ /@\./) {
> > (0) if (&User-Name =~ /@\./) -> FALSE
> > (0) } # if (&User-Name) = notfound
> > (0) } # policy filter_username = notfound
> > (0) [preprocess] = ok
> > (0) [chap] = noop
> > (0) [mschap] = noop
> > (0) [digest] = noop
> > (0) suffix: Checking for suffix after "@"
> > (0) suffix: No '@' in User-Name = "F0:3D:03:EC:42:66", looking up realm
> > NULL
> > (0) suffix: No such realm "NULL"
> > (0) [suffix] = noop
> > (0) eap: No EAP-Message, not doing EAP
> > (0) [eap] = noop
> > (0) [files] = noop
> > (0) sql: EXPAND %{User-Name}
> > (0) sql: --> F0:3D:03:EC:42:66
> > (0) sql: SQL-User-Name set to 'F0:3D:03:EC:42:66'
> > rlm_sql (sql): Reserved connection (1)
> > (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
> > WHERE username = '%{SQL-User-Name}' ORDER BY id
> > (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck
> > WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: Executing select query: SELECT id, username, attribute, value,
> op
> > FROM radcheck WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: User found in radcheck table
> > (0) sql: Conditional check items matched, merging assignment check items
> > (0) sql: Cleartext-Password := "F0:3D:03:EC:42:66"
> > (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
> > WHERE username = '%{SQL-User-Name}' ORDER BY id
> > (0) sql: --> SELECT id, username, attribute, value, op FROM radreply
> > WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: Executing select query: SELECT id, username, attribute, value,
> op
> > FROM radreply WHERE username = 'F0:3D:03:EC:42:66' ORDER BY id
> > (0) sql: User found in radreply table, merging reply items
> > (0) sql: Mikrotik-Rate-Limit == "1024k/1024k"
> > (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> > '%{SQL-User-Name}' ORDER BY priority
> > (0) sql: --> SELECT groupname FROM radusergroup WHERE username =
> > 'F0:3D:03:EC:42:66' ORDER BY priority
> > (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
> > username = 'F0:3D:03:EC:42:66' ORDER BY priority
> > (0) sql: User not found in any groups
> > rlm_sql (sql): Released connection (1)
> > Need 4 more connections to reach 10 spares
> > rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots
> > used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket,
> > server version 5.5.5-10.1.29-MariaDB-6, protocol version 10
> > (0) [sql] = ok
> > (0) [expiration] = noop
> > (0) [logintime] = noop
> > (0) [pap] = updated
> > (0) } # authorize = updated
> > (0) Found Auth-Type = PAP
> > (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> > (0) Auth-Type PAP {
> > (0) pap: Login attempt with password
> > (0) pap: Comparing with "known good" Cleartext-Password
> > (0) pap: User authenticated successfully
> > (0) [pap] = ok
> > (0) } # Auth-Type PAP = ok
> > (0) # Executing section post-auth from file
> > /etc/freeradius/3.0/sites-enabled/default
> > (0) post-auth {
> > (0) update {
> > (0) No attributes updated
> > (0) } # update = noop
> > (0) sql: EXPAND .query
> > (0) sql: --> .query
> > (0) sql: Using query template 'query'
> > rlm_sql (sql): Reserved connection (2)
> > (0) sql: EXPAND %{User-Name}
> > (0) sql: --> F0:3D:03:EC:42:66
> > (0) sql: SQL-User-Name set to 'F0:3D:03:EC:42:66'
> > (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
> > VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')
> > (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
> > VALUES ( 'F0:3D:03:EC:42:66', 'F0:3D:03:EC:42:66', 'Access-Accept',
> > '2018-05-31 12:30:46')
> > (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
> > authdate) VALUES ( 'F0:3D:03:EC:42:66', 'F0:3D:03:EC:42:66',
> > 'Access-Accept', '2018-05-31 12:30:46')
> > (0) sql: SQL query returned: success
> > (0) sql: 1 record(s) updated
> > rlm_sql (sql): Released connection (2)
> > (0) [sql] = ok
> > (0) [exec] = noop
> > (0) policy remove_reply_message_if_eap {
> > (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> > (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> > (0) else {
> > (0) [noop] = noop
> > (0) } # else = noop
> > (0) } # policy remove_reply_message_if_eap = noop
> > (0) } # post-auth = ok
> > (0) Login OK: [F0:3D:03:EC:42:66/F0:3D:03:EC:42:66] (from client
> localhost
> > port 1812)
> > (0) Sent Access-Accept Id 64 from 127.0.0.1:1812 to 127.0.0.1:42592
> > length 0
> > (0) Finished request
> > Waking up in 4.9 seconds.
> >
> >
> > --
> > Nebedum Uchenna
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/
> > list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list