Config FreeRadius (3.0.16) to work with SQL: The Guide is outdated - please helps
James Ngo
james.ngobui at gmail.com
Sat Sep 29 01:17:03 CEST 2018
Here it is:
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file
/etc/freeradius/3.0/mods-config/sql/main/sqlite/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/debug
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client RevLodge-UAP-AC {
ipaddr = 10.5.5.47
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_detail
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_null"
server = "localhost"
port = 3306
login = "radiusadmin"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
logfile = "/var/log/freeradius/sqllog.sql"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM
nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM
radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM
radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op
FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op
FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
(%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s',
acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= %{integer:Event-Timestamp}"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
(%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s',
acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= %{integer:Event-Timestamp}"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username,
realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, acctterminatecause, servicetype, framedprotocol,
framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
%{%{integer:Event-Timestamp}:-date('now')},
%{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime =
%{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0,
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
%{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
%{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
%{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
%{%{Acct-Output-Octets}:-0}, acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
instantiate {
}
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "sql" from file
/etc/freeradius/3.0/mods-enabled/sql
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 41648
Listening on proxy address :: port 47024
Ready to process requests
(0) Received Access-Request Id 168 from 10.25.25.47:56513 to
10.25.25.45:1812 length 170
(0) User-Name = "testuser1"
(0) NAS-IP-Address = 10.25.25.47
(0) NAS-Identifier = "44d9e7fc7b5c"
(0) NAS-Port = 0
(0) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(0) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(0) Framed-MTU = 1400
(0) NAS-Port-Type = Wireless-802.11
(0) Connect-Info = "CONNECT 0Mbps 802.11b"
(0) EAP-Message = 0x0276000e01746573747573657231
(0) Message-Authenticator = 0xdba519a9ae3f7261293a81134d193436
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 118 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 119 length 22
(0) eap: EAP session adding &reply:State = 0xcdea9f30cd9d9bea
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 168 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(0) EAP-Message = 0x017700160410ad9c3c4314f316038ae0fff84d3bb71d
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xcdea9f30cd9d9bead12bb49242b27f0e
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 169 from 10.25.25.47:56513 to
10.25.25.45:1812 length 182
(1) User-Name = "testuser1"
(1) NAS-IP-Address = 10.25.25.47
(1) NAS-Identifier = "44d9e7fc7b5c"
(1) NAS-Port = 0
(1) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(1) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(1) Framed-MTU = 1400
(1) NAS-Port-Type = Wireless-802.11
(1) Connect-Info = "CONNECT 0Mbps 802.11b"
(1) EAP-Message = 0x027700080319152b
(1) State = 0xcdea9f30cd9d9bead12bb49242b27f0e
(1) Message-Authenticator = 0xb7448a1618b6e5557e2c502150bba9f3
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 119 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql: --> testuser1
(1) sql: SQL-User-Name set to 'testuser1'
rlm_sql (sql): Reserved connection (0)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'testuser1' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'testuser1' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username =
'testuser1' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'testuser1' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
(1) [sql] = notfound
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not setting
Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password
is available
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xcdea9f30cd9d9bea
(1) eap: Finished EAP session with state 0xcdea9f30cd9d9bea
(1) eap: Previous EAP request found for state 0xcdea9f30cd9d9bea, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 120 length 6
(1) eap: EAP session adding &reply:State = 0xcdea9f30cc9286ea
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 169 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(1) EAP-Message = 0x017800061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xcdea9f30cc9286ead12bb49242b27f0e
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 170 from 10.25.25.47:56513 to
10.25.25.45:1812 length 335
(2) User-Name = "testuser1"
(2) NAS-IP-Address = 10.25.25.47
(2) NAS-Identifier = "44d9e7fc7b5c"
(2) NAS-Port = 0
(2) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(2) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(2) Framed-MTU = 1400
(2) NAS-Port-Type = Wireless-802.11
(2) Connect-Info = "CONNECT 0Mbps 802.11b"
(2) EAP-Message =
0x027800a119800000009716030100920100008e03035baeb2b334323c42bfab854b84309e00301bef1786b7837807b9979a7a78068b00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00
(2) State = 0xcdea9f30cc9286ead12bb49242b27f0e
(2) Message-Authenticator = 0x22de6a9cbc23e3448dd46e1d239f054d
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 120 length 161
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xcdea9f30cc9286ea
(2) eap: Finished EAP session with state 0xcdea9f30cc9286ea
(2) eap: Previous EAP request found for state 0xcdea9f30cc9286ea, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 151 bytes
(2) eap_peap: Got complete TLS record (151 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv TLS 1.2 [length 0092]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2 [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2 [length 02d3]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 121 length 1004
(2) eap: EAP session adding &reply:State = 0xcdea9f30cf9386ea
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 170 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(2) EAP-Message =
0x017903ec19c000000475160303003d0200003903031ee42b66e5dbb0376437f77a61f5de616f5b6888e9835ed97072f204acf7c71100c030000011ff01000100000b0004030001020017000016030302d30b0002cf0002cc0002c9308202c5308201ada003020102020900e88b749ad3eb6833300d0609
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xcdea9f30cf9386ead12bb49242b27f0e
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 171 from 10.25.25.47:56513 to
10.25.25.45:1812 length 180
(3) User-Name = "testuser1"
(3) NAS-IP-Address = 10.25.25.47
(3) NAS-Identifier = "44d9e7fc7b5c"
(3) NAS-Port = 0
(3) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(3) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(3) Framed-MTU = 1400
(3) NAS-Port-Type = Wireless-802.11
(3) Connect-Info = "CONNECT 0Mbps 802.11b"
(3) EAP-Message = 0x027900061900
(3) State = 0xcdea9f30cf9386ead12bb49242b27f0e
(3) Message-Authenticator = 0x00298ff003f45929bc4031ae853f6f4f
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 121 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xcdea9f30cf9386ea
(3) eap: Finished EAP session with state 0xcdea9f30cf9386ea
(3) eap: Previous EAP request found for state 0xcdea9f30cf9386ea, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 122 length 153
(3) eap: EAP session adding &reply:State = 0xcdea9f30ce9086ea
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 171 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(3) EAP-Message =
0x017a009919001bc9acc829a06f78c9fa526d9e4ae5f6ec58084cd14e9ce34f2e5220afe425367cf8103e1605d79a0e1817e3a6d67f648917857db5d5b8e5805a89c846433dece8c3b1cbf70d6ac13771c578810ba9d13a53e40f825920238d3075da10c5354a28fb7d5965c13953f1ec449b317debe3a0
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xcdea9f30ce9086ead12bb49242b27f0e
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 172 from 10.25.25.47:56513 to
10.25.25.45:1812 length 310
(4) User-Name = "testuser1"
(4) NAS-IP-Address = 10.25.25.47
(4) NAS-Identifier = "44d9e7fc7b5c"
(4) NAS-Port = 0
(4) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(4) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(4) Framed-MTU = 1400
(4) NAS-Port-Type = Wireless-802.11
(4) Connect-Info = "CONNECT 0Mbps 802.11b"
(4) EAP-Message =
0x027a008819800000007e16030300461000004241046b3e802f24feae8bbf5181dd0309247878ff20142a7c63f7bcf2d61140679186cca9f61b57c36528e2b3bb70e2006f922a4965fb68c28eeae52df60a76b45afa14030300010116030300282597f67e7230ff207fea8a9e9a42254bcc7e97bc53f7cf
(4) State = 0xcdea9f30ce9086ead12bb49242b27f0e
(4) Message-Authenticator = 0xa731bd4bad4aa296e9fe20bc88daf308
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 122 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xcdea9f30ce9086ea
(4) eap: Finished EAP session with state 0xcdea9f30ce9086ea
(4) eap: Previous EAP request found for state 0xcdea9f30ce9086ea, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2 [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2 [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 123 length 57
(4) eap: EAP session adding &reply:State = 0xcdea9f30c99186ea
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 172 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(4) EAP-Message =
0x017b003919001403030001011603030028be4cc8d652f0ffb5a66985a11d3a5cce04a1258f5458e4d30f357474c11e96f6d7acafdda5b7d964
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xcdea9f30c99186ead12bb49242b27f0e
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 173 from 10.25.25.47:56513 to
10.25.25.45:1812 length 180
(5) User-Name = "testuser1"
(5) NAS-IP-Address = 10.25.25.47
(5) NAS-Identifier = "44d9e7fc7b5c"
(5) NAS-Port = 0
(5) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(5) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(5) Framed-MTU = 1400
(5) NAS-Port-Type = Wireless-802.11
(5) Connect-Info = "CONNECT 0Mbps 802.11b"
(5) EAP-Message = 0x027b00061900
(5) State = 0xcdea9f30c99186ead12bb49242b27f0e
(5) Message-Authenticator = 0xd06499d1754fe2fc438a9c94e552d4bb
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 123 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0xcdea9f30c99186ea
(5) eap: Finished EAP session with state 0xcdea9f30c99186ea
(5) eap: Previous EAP request found for state 0xcdea9f30c99186ea, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 124 length 40
(5) eap: EAP session adding &reply:State = 0xcdea9f30c89686ea
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 173 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(5) EAP-Message =
0x017c00281900170303001dbe4cc8d652f0ffb697af1676942b6553b818208ab60812486ee829a78f
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xcdea9f30c89686ead12bb49242b27f0e
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 174 from 10.25.25.47:56513 to
10.25.25.45:1812 length 219
(6) User-Name = "testuser1"
(6) NAS-IP-Address = 10.25.25.47
(6) NAS-Identifier = "44d9e7fc7b5c"
(6) NAS-Port = 0
(6) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(6) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(6) Framed-MTU = 1400
(6) NAS-Port-Type = Wireless-802.11
(6) Connect-Info = "CONNECT 0Mbps 802.11b"
(6) EAP-Message =
0x027c002d190017030300222597f67e7230ff21609e328bedbdfc07cbbc6d6cea8156df58009fe0c95d70b1950e
(6) State = 0xcdea9f30c89686ead12bb49242b27f0e
(6) Message-Authenticator = 0x28aacba61edc82c08f9cc161df2d628f
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 124 length 45
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0xcdea9f30c89686ea
(6) eap: Finished EAP session with state 0xcdea9f30c89686ea
(6) eap: Previous EAP request found for state 0xcdea9f30c89686ea, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - testuser1
(6) eap_peap: Got inner identity 'testuser1'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x027c000e01746573747573657231
(6) eap_peap: Setting User-Name to testuser1
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x027c000e01746573747573657231
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "testuser1"
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x027c000e01746573747573657231
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "testuser1"
(6) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 124 length 14
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 125 length 43
(6) eap: EAP session adding &reply:State = 0xb9b00956b9cd1334
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message =
0x017d002b1a017d002610c60ddbc0e51fe479a6603deaf09bc2ae667265657261646975732d332e302e3136
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xb9b00956b9cd1334255d8030a5c16353
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message =
0x017d002b1a017d002610c60ddbc0e51fe479a6603deaf09bc2ae667265657261646975732d332e302e3136
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0xb9b00956b9cd1334255d8030a5c16353
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message =
0x017d002b1a017d002610c60ddbc0e51fe479a6603deaf09bc2ae667265657261646975732d332e302e3136
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0xb9b00956b9cd1334255d8030a5c16353
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 125 length 74
(6) eap: EAP session adding &reply:State = 0xcdea9f30cb9786ea
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 174 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(6) EAP-Message =
0x017d004a1900170303003fbe4cc8d652f0ffb7816e2d74ad76e451db3db74aaeb886fbe80b5aa8c5416f0c0f0aea69a59ede65bf19afa7ac53229352700e604627cad9fc5a4f9b0fde4a
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xcdea9f30cb9786ead12bb49242b27f0e
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 175 from 10.25.25.47:56513 to
10.25.25.45:1812 length 273
(7) User-Name = "testuser1"
(7) NAS-IP-Address = 10.25.25.47
(7) NAS-Identifier = "44d9e7fc7b5c"
(7) NAS-Port = 0
(7) Called-Station-Id = "44-7F-E7-FE-7B-5C:Home11"
(7) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(7) Framed-MTU = 1400
(7) NAS-Port-Type = Wireless-802.11
(7) Connect-Info = "CONNECT 0Mbps 802.11b"
(7) EAP-Message =
0x027d0063190017030300582597f67e7230ff226d8f37b792ee6d63529d93a77619091f39b66d0cb1e3ff5760590823ad62d281674e6cd7cbbca13d6c6c0e47a5a3f9bb64391e36e99a8bb389973c1cc5dc04aa51eed6a19ca9c9d11f5d51cb0e6b1cd5
(7) State = 0xcdea9f30cb9786ead12bb49242b27f0e
(7) Message-Authenticator = 0x2feac0778c37493c253e0b9044a422dc
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 125 length 99
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0xb9b00956b9cd1334
(7) eap: Finished EAP session with state 0xcdea9f30cb9786ea
(7) eap: Previous EAP request found for state 0xcdea9f30cb9786ea, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message =
0x027d00441a027d003f319722ba1024242a1de5e57943ecadfb7f0000000000000000fef947816d344910156040b8f7a9a7b983ad54fd7549980900746573747573657231
(7) eap_peap: Setting User-Name to testuser1
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message =
0x027d00441a027d003f319722ba1024242a1de5e57943ecadfb7f0000000000000000fef947816d344910156040b8f7a9a7b983ad54fd7549980900746573747573657231
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "testuser1"
(7) eap_peap: State = 0xb9b00956b9cd1334255d8030a5c16353
(7) Virtual server inner-tunnel received request
(7) EAP-Message =
0x027d00441a027d003f319722ba1024242a1de5e57943ecadfb7f0000000000000000fef947816d344910156040b8f7a9a7b983ad54fd7549980900746573747573657231
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "testuser1"
(7) State = 0xb9b00956b9cd1334255d8030a5c16353
(7) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 125 length 68
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
(7) sql: EXPAND %{User-Name}
(7) sql: --> testuser1
(7) sql: SQL-User-Name set to 'testuser1'
rlm_sql (sql): Reserved connection (1)
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'testuser1' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'testuser1' ORDER BY id
(7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(7) sql: --> SELECT groupname FROM radusergroup WHERE username =
'testuser1' ORDER BY priority
(7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'testuser1' ORDER BY priority
(7) sql: User not found in any groups
rlm_sql (sql): Released connection (1)
(7) [sql] = notfound
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0xb9b00956b9cd1334
(7) eap: Finished EAP session with state 0xb9b00956b9cd1334
(7) eap: Previous EAP request found for state 0xb9b00956b9cd1334, released
from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2: authenticate {
(7) mschap: WARNING: No Cleartext-Password configured. Cannot create
NT-Password
(7) mschap: WARNING: No Cleartext-Password configured. Cannot create
LM-Password
(7) mschap: Creating challenge hash with username: testuser1
(7) mschap: Client is using MS-CHAPv2
(7) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(7) mschap: ERROR: MS-CHAP2-Response is incorrect
(7) [mschap] = reject
(7) } # authenticate = reject
(7) eap: Sending EAP Failure (code 4) ID 125 length 4
(7) eap: Freeing handler
(7) [eap] = reject
(7) } # authenticate = reject
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) Post-Auth-Type REJECT {
(7) sql: EXPAND .query
(7) sql: --> .query
(7) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (2)
(7) sql: EXPAND %{User-Name}
(7) sql: --> testuser1
(7) sql: SQL-User-Name set to 'testuser1'
(7) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(7) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'testuser1', '', 'Access-Reject', '2018-09-28 16:01:07')
(7) sql: EXPAND /var/log/freeradius/sqllog.sql
(7) sql: --> /var/log/freeradius/sqllog.sql
(7) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'testuser1', '', 'Access-Reject', '2018-09-28 16:01:07')
(7) sql: SQL query returned: success
(7) sql: 1 record(s) updated
rlm_sql (sql): Released connection (2)
(7) [sql] = ok
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> testuser1
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) update outer.session-state {
(7) &Module-Failure-Message := &request:Module-Failure-Message ->
'mschap: FAILED: No NT/LM-Password. Cannot perform authentication'
(7) } # update outer.session-state = noop
(7) } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) MS-CHAP-Error = "}E=691 R=1 C=b0c939926d6584ae1db584f157623d43 V=3
M=Authentication rejected"
(7) EAP-Message = 0x047d0004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap: MS-CHAP-Error = "}E=691 R=1
C=b0c939926d6584ae1db584f157623d43 V=3 M=Authentication rejected"
(7) eap_peap: EAP-Message = 0x047d0004
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap: MS-CHAP-Error = "}E=691 R=1
C=b0c939926d6584ae1db584f157623d43 V=3 M=Authentication rejected"
(7) eap_peap: EAP-Message = 0x047d0004
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 126 length 46
(7) eap: EAP session adding &reply:State = 0xcdea9f30ca9486ea
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot
perform authentication"
(7) Sent Access-Challenge Id 175 from 10.5.5.45:1812 to 10.5.5.47:56513
length 0
(7) EAP-Message =
0x017e002e19001703030023be4cc8d652f0ffb89f909d30ef542e6ec6cccf95e6d413fd732f694b3ba347b72a5641
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xcdea9f30ca9486ead12bb49242b27f0e
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 176 from 10.5.5.47:56513 to 10.5.5.45:1812
length 220
(8) User-Name = "testuser1"
(8) NAS-IP-Address = 10.5.5.47
(8) NAS-Identifier = "44d9e7fc7b5c"
(8) NAS-Port = 0
(8) Called-Station-Id = "44-D9-E7-FE-7B-5C:Home11"
(8) Calling-Station-Id = "D0-2B-20-74-5D-BA"
(8) Framed-MTU = 1400
(8) NAS-Port-Type = Wireless-802.11
(8) Connect-Info = "CONNECT 0Mbps 802.11b"
(8) EAP-Message =
0x027e002e190017030300232597f67e7230ff230738e3cb8e293e6957f838be21d4b7380b89d57bab0db7e53d28ca
(8) State = 0xcdea9f30ca9486ead12bb49242b27f0e
(8) Message-Authenticator = 0x1cd0faf5f1929bacc4e8e52f8a1336bc
(8) Restoring &session-state
(8) &session-state:Module-Failure-Message := "mschap: FAILED: No
NT/LM-Password. Cannot perform authentication"
(8) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "testuser1", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 126 length 46
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0xcdea9f30ca9486ea
(8) eap: Finished EAP session with state 0xcdea9f30ca9486ea
(8) eap: Previous EAP request found for state 0xcdea9f30ca9486ea, released
from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap: ERROR: The users session was previously rejected: returning
reject (again.)
(8) eap_peap: This means you need to read the PREVIOUS messages in the
debug output
(8) eap_peap: to find out the reason why the user was rejected
(8) eap_peap: Look for "reject" or "fail". Those earlier messages will
tell you
(8) eap_peap: what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
failed
(8) eap: Sending EAP Failure (code 4) ID 126 length 4
(8) eap: Failed in EAP select
(8) [eap] = invalid
(8) } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) Post-Auth-Type REJECT {
(8) sql: EXPAND .query
(8) sql: --> .query
(8) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (3)
(8) sql: EXPAND %{User-Name}
(8) sql: --> testuser1
(8) sql: SQL-User-Name set to 'testuser1'
(8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(8) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'testuser1', '', 'Access-Reject', '2018-09-28 16:01:07')
(8) sql: EXPAND /var/log/freeradius/sqllog.sql
(8) sql: --> /var/log/freeradius/sqllog.sql
(8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'testuser1', '', 'Access-Reject', '2018-09-28 16:01:07')
(8) sql: SQL query returned: success
(8) sql: 1 record(s) updated
rlm_sql (sql): Released connection (3)
(8) [sql] = ok
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject: --> testuser1
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8) [attr_filter.access_reject] = updated
(8) [eap] = noop
(8) policy remove_reply_message_if_eap {
(8) if (&reply:EAP-Message && &reply:Reply-Message) {
(8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(8) else {
(8) [noop] = noop
(8) } # else = noop
(8) } # policy remove_reply_message_if_eap = noop
(8) } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 176 from 10.5.5.45:1812 to 10.5.5.47:56513 length
44
(8) EAP-Message = 0x047e0004
(8) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
(0) Cleaning up request packet ID 168 with timestamp +42
(1) Cleaning up request packet ID 169 with timestamp +42
(2) Cleaning up request packet ID 170 with timestamp +42
(3) Cleaning up request packet ID 171 with timestamp +42
(4) Cleaning up request packet ID 172 with timestamp +42
(5) Cleaning up request packet ID 173 with timestamp +42
(6) Cleaning up request packet ID 174 with timestamp +42
(7) Cleaning up request packet ID 175 with timestamp +42
(8) Cleaning up request packet ID 176 with timestamp +42
Ready to process requests
On Fri, Sep 28, 2018 at 3:35 PM Uchenna Nebedum <nebeduch at gmail.com> wrote:
> Send the debug output when you send an access request, freeradius -X
>
> Uchenna Nebedum
>
> On Fri, Sep 28, 2018, 23:32 <james.ngobui at gmail.com> wrote:
>
> > Hello there,
> > Thank you for your helps.
> > As for the mistype, negative. I have all of them configured as
> > Cleartext-Password
> > As for the usergroup, since we do not use any group, I do not need to add
> > usergroup so I don't have it in my config. It is optional and only
> > necessary if you decide to use group though
> > To share what I have done:
> > 1/ create a new (admin) user for the database
> > 2/ add new user by command line --> check and see it populate in the
> > radius server
> > 3/ restart the SQL server
> > 4/ restart the freeradius server
> > I still have the same thing: access reject and server has no response...
> > Any helps would be really appreciated.
> > Thanks
> >
> > -----Original Message-----
> > From: Freeradius-Users <freeradius-users-bounces+james.ngobui=
> > gmail.com at lists.freeradius.org> On Behalf Of Rafael Labiak Olivastro
> > Sent: September 28, 2018 1:16 PM
> > To: FreeRadius users mailing list <freeradius-users at lists.freeradius.org
> >
> > Subject: RES: Config FreeRadius (3.0.16) to work with SQL: The Guide is
> > outdated - please helps
> >
> > Example:
> >
> > MariaDB [mikrotik_erp]> select * from radcheck;
> >
> >
> +----+----------+--------------------+----+----------------------------------+------+------------+------------+
> > | id | UserName | Attribute | op | Value
> > | obs | id_cliente | id_empresa |
> >
> >
> +----+----------+--------------------+----+----------------------------------+------+------------+------------+
> > | 1 | rafael | MD5-Password | := |
> > 81dc9bdb52d04dc20036dbd8313ed055 | | 743 | 1 |
> > | 2 | rafael | ClearText-Password | := | 1234
> > | | 743 | 1 |
> >
> >
> +----+----------+--------------------+----+----------------------------------+------+------------+------------+
> > 2 rows in set (0.00 sec)
> >
> > MariaDB [mikrotik_erp]> select * from usergorup; ERROR 1146 (42S02):
> Table
> > 'mikrotik_erp.usergorup' doesn't exist MariaDB [mikrotik_erp]> select *
> > from radcheck;
> >
> >
> +----+----------+--------------------+----+----------------------------------+------+------------+------------+
> > | id | UserName | Attribute | op | Value
> > | obs | id_cliente | id_empresa |
> >
> >
> +----+----------+--------------------+----+----------------------------------+------+------------+------------+
> > | 1 | rafael | MD5-Password | := |
> > 81dc9bdb52d04dc20036dbd8313ed055 | | 743 | 1 |
> > | 2 | rafael | ClearText-Password | := | 1234
> > | | 743 | 1 |
> >
> >
> +----+----------+--------------------+----+----------------------------------+------+------------+------------+
> > 2 rows in set (0.00 sec)
> >
> > MariaDB [mikrotik_erp]> select * from radusergroup;
> > +----------+------------------------------------+----------+
> > | UserName | GroupName | priority |
> > +----------+------------------------------------+----------+
> > | rafael | (Huawei)Acesso Residencial 2 MEGAS | 1 |
> > +----------+------------------------------------+----------+
> > 1 row in set (0.00 sec)
> >
> > MariaDB [mikrotik_erp]> select * from radgroupreply;
> >
> >
> +----+------------------------------------+------------------------------+----+-------------+-----------+----------+
> > | id | GroupName | Attribute
> |
> > op | Value | idempresa | tipo |
> >
> >
> +----+------------------------------------+------------------------------+----+-------------+-----------+----------+
> > | 1 | Acesso Residencial 2 MEGAS | Mikrotik-Rate-Limit
> |
> > := | 1024k/2048k | 9999 | MIKROTIK |
> > | 4 | (Huawei)Acesso Residencial 2 MEGAS | Huawei-Qos-Profile-Name
> |
> > := | out-1M | 9999 | HUAWEI |
> > | 5 | (Huawei)Acesso Residencial 2 MEGAS | Huawei-Down-QOS-Profile-Name
> |
> > := | in-2M | 9999 | HUAWEI |
> > | 6 | (Huawei)Acesso Residencial 2 MEGAS | Huawei-Policy-Route
> |
> > := | 192.168.0.1 | 9999 | HUAWEI |
> >
> >
> +----+------------------------------------+------------------------------+----+-------------+-----------+----------+
> > 4 rows in set (0.00 sec)
> >
> > MariaDB [mikrotik_erp]>
> >
> > Enviado do Email<https://go.microsoft.com/fwlink/?LinkId=550986> para
> > Windows 10
> >
> > ________________________________
> > De: Rafael Labiak Olivastro <rolivastro at hotmail.com>
> > Enviado: Friday, September 28, 2018 4:03:27 PM
> > Para: FreeRadius users mailing list
> > Assunto: RES: Config FreeRadius (3.0.16) to work with SQL: The Guide is
> > outdated - please helps
> >
> >
> > Other thing is that RADUSERGROUP is not the same than RADCHECK, you need
> a
> > row with username in both tables, not just in RADCHECK.
> >
> > The message is explaining that the user do not exist em RADUSERGROUP.
> (and
> > you show the user in radcheck)
> >
> >
> >
> > Enviado do Email<https://go.microsoft.com/fwlink/?LinkId=550986> para
> > Windows 10
> >
> >
> >
> > ________________________________
> > De: Freeradius-Users <freeradius-users-bounces+rolivastro=
> > hotmail.com at lists.freeradius.org> em nome de Rafael Labiak Olivastro <
> > rolivastro at hotmail.com>
> > Enviado: Friday, September 28, 2018 3:58:07 PM
> > Para: FreeRadius users mailing list
> > Assunto: RES: Config FreeRadius (3.0.16) to work with SQL: The Guide is
> > outdated - please helps
> >
> > Hello,
> >
> >
> >
> > Maybe if the MySQL is configured to be case sensitive the correct
> atribute
> > is ClearText-Password unstead Cleartext-Password.
> >
> >
> >
> > It is just a guess. (note CT in ClearText)
> >
> >
> >
> > Rafael
> >
> >
> >
> > Enviado do Email<
> >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgo.microsoft.com%2Ffwlink%2F%3FLinkId%3D550986&data=02%7C01%7C%7C3b7f9e7137f84c285e5408d6257cc667%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636737615161542787&sdata=f56eWLAAr9nJm%2FdLSSZ44rDh6vBIjhmHkzmr9TCCRlA%3D&reserved=0
> >
> > para Windows 10
> >
> >
> >
> > ________________________________
> > De: Freeradius-Users <freeradius-users-bounces+rolivastro=
> > hotmail.com at lists.freeradius.org> em nome de James Ngo <
> > james.ngobui at gmail.com>
> > Enviado: Friday, September 28, 2018 2:54:48 PM
> > Para: freeradius-users at lists.freeradius.org
> > Assunto: Re: Config FreeRadius (3.0.16) to work with SQL: The Guide is
> > outdated - please helps
> >
> > This is very strange then...
> > when I query manually using mysql, it shows per below What could have
> gone
> > wrong?
> >
> > mysql> select * from radcheck;
> > +----+-----------+--------------------+----+-----------+
> > | id | username | attribute | op | value |
> > +----+-----------+--------------------+----+-----------+
> > | 2 | testuser1 | Cleartext-Password | := | testuser1 |
> > +----+-----------+--------------------+----+-----------+
> > 1 row in set (0.01 sec)
> >
> > mysql>
> >
> >
> > On Fri, Sep 28, 2018 at 11:27 AM Alan DeKok <aland at deployingradius.com>
> > wrote:
> >
> > > On Sep 28, 2018, at 2:12 PM, James Ngo <james.ngobui at gmail.com> wrote:
> > > >
> > > > Hi Alan,
> > > > You are absolutely right about the log file and I am sorry to be
> > > bothering
> > > > you again. I copy the content of my system log file of the issue
> > > > below
> > > for
> > > > your reference (My other test user which use the "user" file works
> OK).
> > >
> > >
> > > ...
> > >
> > > > (7) eap_peap: Got tunneled request
> > > > (7) eap_peap: EAP-Message =
> > > >
> > > 0x022300411a0223003c31cc0432c71245051a187bd13655a9e34a0000000000000000
> > > 721615e15d5ae620467f9822441958a6f7be55128b39b716006a616d65736e
> > > > (7) eap_peap: Setting User-Name to jamesn
> > > > (7) eap_peap: Sending tunneled request to inner-tunnel
> > >
> > > That's the MS-CHAP stuff from PEAP, inside of the TLS tunnel.
> > >
> > > > (7) sql: EXPAND %{User-Name}
> > > > (7) sql: --> testuser1
> > > > (7) sql: SQL-User-Name set to 'testuser1'
> > > > rlm_sql (sql): Reserved connection (1)
> > > > (7) sql: EXPAND SELECT id, username, attribute, value, op FROM
> > > > radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
> > > > (7) sql: --> SELECT id, username, attribute, value, op FROM
> radcheck
> > > > WHERE username = 'testuser1' ORDER BY id
> > > > (7) sql: Executing select query: SELECT id, username, attribute,
> > > > value,
> > > op
> > > > FROM radcheck WHERE username = 'testuser1' ORDER BY id
> > > > (7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> > > > '%{SQL-User-Name}' ORDER BY priority
> > > > (7) sql: --> SELECT groupname FROM radusergroup WHERE username =
> > > > 'testuser1' ORDER BY priority
> > > > (7) sql: Executing select query: SELECT groupname FROM radusergroup
> > > > WHERE username = 'testuser1' ORDER BY priority
> > > > (7) sql: User not found in any groups rlm_sql (sql): Released
> > > > connection (1) Need 4 more connections to reach 10 spares rlm_sql
> > > > (sql): Opening additional connection (6), 1 of 26 pending slots
> > > used
> > > > (7) [sql] = notfound
> > >
> > > That's definitive.
> > >
> > > The "testuser1" isn't in SQL.
> > >
> > > Run the queries manually to see what they return.
> > >
> > > Alan DeKok.
> > >
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> > > https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.f
> > > reeradius.org%2Flist%2Fusers.html&data=02%7C01%7C%7C3b7f9e7137f84c
> > > 285e5408d6257cc667%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636737
> > > 615161542787&sdata=vhXLdNI79MiBC7DmtofLRgx3Rc6kcRvmE%2BiS2O8zm3c%3
> > > D&reserved=0
> > -
> > List info/subscribe/unsubscribe? See
> >
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freeradius.org%2Flist%2Fusers.html&data=02%7C01%7C%7C3b7f9e7137f84c285e5408d6257cc667%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636737615161542787&sdata=vhXLdNI79MiBC7DmtofLRgx3Rc6kcRvmE%2BiS2O8zm3c%3D&reserved=0
> > -
> > List info/subscribe/unsubscribe? See
> >
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freeradius.org%2Flist%2Fusers.html&data=02%7C01%7C%7C3b7f9e7137f84c285e5408d6257cc667%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636737615161542787&sdata=vhXLdNI79MiBC7DmtofLRgx3Rc6kcRvmE%2BiS2O8zm3c%3D&reserved=0
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> >
> > ---
> > This email has been checked for viruses by AVG.
> > https://www.avg.com
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list