Reading dynamic clients from "clients" files in /etc/raddb/dynamic-clients doesn't work
smith john
johnerickson663 at gmail.com
Sat Feb 23 15:46:10 CET 2019
Hello,
I'm trying to set up dynamic clients for freeradius 2.2.6 on centos 6.9.
Following the documentation in /etc/raddb/mods-available/dynamic_clients, I
linked /etc/raddb/sites-enabled/dynamic_clients to
/etcraddb/sites-available/dynamic_clients.
The contents of /etc/raddb/sites-enabled/dynamic_clients is changed to :
client dynamic {
ipaddr = 0.0.0.0
netmask = 0
dynamic_clients = dynamic_client_server
directory = ${confdir}/dynamic-clients/
lifetime = 3600
}
server dynamic_client_server {
authorize {
#
# Example 2: Read the clients from "clients" files
# in a directory.
#
# This requires you to uncomment the
# "directory" configuration in the
# "client dynamic" configuration above,
# and then put one file per IP address in
# that directory.
#
dynamic_clients
#
# Tell the caller that the client was defined properly.
#
# If the authorize section does NOT return "ok", then
# the new client is ignored.
ok
}
}
I also created the /etc/raddb/dynamic-clients directory and changed its
ownership to root:radiusd
Below is how I test the config:
1. Run "radiusd -X" in one shell
2. Open another shell and create a file named "18.220.171.233" under
etc/raddb/dynamic-clients.
client mynas {
ipaddr = 18.220.171.233
secret = testing456
}
3. ssh to the nas server at 18.220.171.233, and run the radtest command to
test the setup.
4. The debug gives the following result:
rad_recv: Access-Request packet from host 18.220.171.233 port 33477,
id=170, length=76
server dynamic_client_server {
} # server dynamic_client_server
- Cannot add client 18.220.171.233: Required attribute
"FreeRADIUS-Client-Secret" is missing.
Ignoring request to authentication address * port 1812 from unknown client
18.220.171.233 port 33477
I can't figure out what I am missing. Can somebody help me with this? Thank
you.
This is the complete debug output:
radiusd: FreeRADIUS Version 2.2.6, for host x86_64-redhat-linux-gnu, built
on Jul 18 2017 at 12:13:14
Copyright (C) 1999-2013 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License.
For more information about these matters, see the file named COPYRIGHT.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/soh
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/cache
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/rediswho
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/dhcp_sqlippool
including configuration file /etc/raddb/modules/replicate
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/radrelay
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/redis
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/sql.conf
including configuration file /etc/raddb/sql/mysql/dialup.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/dynamic-clients
including configuration file /etc/raddb/sites-enabled/control-socket
main {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client dynamic {
ipaddr = 0.0.0.0
netmask = 0
require_message_authenticator = no
dynamic_clients = "dynamic_client_server"
lifetime = 3600
}
including dynamic clients in /etc/raddb/dynamic-clients/
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file
modules {
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/raddb/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 1024
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
CA_file = "/etc/raddb/certs/ca.pem"
private_key_password = "whatever"
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
reading pairlist file /etc/raddb/huntgroups
reading pairlist file /etc/raddb/hints
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_sql
Module: Instantiating module "sql" from file /etc/raddb/sql.conf
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = "3306"
login = "radius"
password = "radpass"
radius_db = "radius"
read_groups = yes
sqltrace = no
sqltracefile = "/var/log/radius/sqltrace.sql"
readclients = no
deletestalesessions = yes
num_sql_socks = 32
lifetime = 0
max_queries = 0
sql_user_name = "%{User-Name}"
default_user_profile = ""
nas_query = "SELECT id, nasname, shortname, type, secret, server
FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}'
ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname =
'%{Sql-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname =
'%{Sql-Group}' ORDER BY id"
accounting_onoff_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
unix_timestamp('%S') -
unix_timestamp(acctstarttime), acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
%{%{Acct-Delay-Time}:-0} WHERE acctstoptime IS NULL AND
nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <=
'%S'"
accounting_update_query = " UPDATE radacct SET
framedipaddress = '%{Framed-IP-Address}',
acctsessiontime = '%{%{Acct-Session-Time}:-0}',
acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE
acctsessionid = '%{Acct-Session-Id}' AND username =
'%{SQL-User-Name}' AND nasipaddress = '%{NAS-IP-Address}'"
accounting_update_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype,
acctstarttime, acctsessiontime, acctauthentic,
connectinfo_start, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, servicetype,
framedprotocol, framedipaddress, acctstartdelay,
xascendsessionsvrkey) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
'%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',
INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND),
'%{%{Acct-Session-Time}:-0}', '%{Acct-Authentic}', '',
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}'
<< 32 | '%{%{Acct-Output-Octets}:-0}',
'%{Called-Station-Id}', '%{Calling-Station-Id}',
'%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype,
acctstarttime, acctstoptime, acctsessiontime,
acctauthentic, connectinfo_start, connectinfo_stop,
acctinputoctets, acctoutputoctets, calledstationid,
callingstationid, acctterminatecause, servicetype,
framedprotocol, framedipaddress, acctstartdelay,
acctstopdelay, xascendsessionsvrkey) VALUES
('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}', '%S', NULL,
'0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
accounting_start_query_alt = " UPDATE radacct SET
acctstarttime = '%S', acctstartdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_start =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND
nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query = " UPDATE radacct SET
acctstoptime = '%S', acctsessiontime =
'%{%{Acct-Session-Time}:-0}', acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}', acctoutputoctets =
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', acctstopdelay =
'%{%{Acct-Delay-Time}:-0}', connectinfo_stop =
'%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}'
AND username = '%{SQL-User-Name}' AND
nasipaddress = '%{NAS-IP-Address}'"
accounting_stop_query_alt = " INSERT INTO radacct
(acctsessionid, acctuniqueid, username, realm,
nasipaddress, nasportid, nasporttype, acctstarttime,
acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets,
acctoutputoctets, calledstationid, callingstationid,
acctterminatecause, servicetype, framedprotocol,
framedipaddress, acctstartdelay, acctstopdelay)
VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S', INTERVAL (%{%{Acct-Session-Time}:-0} +
%{%{Acct-Delay-Time}:-0}) SECOND), '%S',
'%{%{Acct-Session-Time}:-0}', '%{Acct-Authentic}', '',
'%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 |
'%{%{Acct-Input-Octets}:-0}',
'%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}',
'0', '%{%{Acct-Delay-Time}:-0}')"
group_membership_query = "SELECT groupname FROM
radusergroup WHERE username = '%{SQL-User-Name}' ORDER
BY priority"
connect_failure_retry_delay = 60
simul_count_query = ""
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress,
callingstationid, framedprotocol
FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
postauth_query = "INSERT INTO radpostauth
(username, pass, reply, authdate) VALUES (
'%{User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to radius at localhost:3306/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): starting 5
rlm_sql (sql): Attempting to connect rlm_sql_mysql #5
rlm_sql_mysql: Starting connect to MySQL server for #5
rlm_sql (sql): Connected new DB handle, #5
rlm_sql (sql): starting 6
rlm_sql (sql): Attempting to connect rlm_sql_mysql #6
rlm_sql_mysql: Starting connect to MySQL server for #6
rlm_sql (sql): Connected new DB handle, #6
rlm_sql (sql): starting 7
rlm_sql (sql): Attempting to connect rlm_sql_mysql #7
rlm_sql_mysql: Starting connect to MySQL server for #7
rlm_sql (sql): Connected new DB handle, #7
rlm_sql (sql): starting 8
rlm_sql (sql): Attempting to connect rlm_sql_mysql #8
rlm_sql_mysql: Starting connect to MySQL server for #8
rlm_sql (sql): Connected new DB handle, #8
rlm_sql (sql): starting 9
rlm_sql (sql): Attempting to connect rlm_sql_mysql #9
rlm_sql_mysql: Starting connect to MySQL server for #9
rlm_sql (sql): Connected new DB handle, #9
rlm_sql (sql): starting 10
rlm_sql (sql): Attempting to connect rlm_sql_mysql #10
rlm_sql_mysql: Starting connect to MySQL server for #10
rlm_sql (sql): Connected new DB handle, #10
rlm_sql (sql): starting 11
rlm_sql (sql): Attempting to connect rlm_sql_mysql #11
rlm_sql_mysql: Starting connect to MySQL server for #11
rlm_sql (sql): Connected new DB handle, #11
rlm_sql (sql): starting 12
rlm_sql (sql): Attempting to connect rlm_sql_mysql #12
rlm_sql_mysql: Starting connect to MySQL server for #12
rlm_sql (sql): Connected new DB handle, #12
rlm_sql (sql): starting 13
rlm_sql (sql): Attempting to connect rlm_sql_mysql #13
rlm_sql_mysql: Starting connect to MySQL server for #13
rlm_sql (sql): Connected new DB handle, #13
rlm_sql (sql): starting 14
rlm_sql (sql): Attempting to connect rlm_sql_mysql #14
rlm_sql_mysql: Starting connect to MySQL server for #14
rlm_sql (sql): Connected new DB handle, #14
rlm_sql (sql): starting 15
rlm_sql (sql): Attempting to connect rlm_sql_mysql #15
rlm_sql_mysql: Starting connect to MySQL server for #15
rlm_sql (sql): Connected new DB handle, #15
rlm_sql (sql): starting 16
rlm_sql (sql): Attempting to connect rlm_sql_mysql #16
rlm_sql_mysql: Starting connect to MySQL server for #16
rlm_sql (sql): Connected new DB handle, #16
rlm_sql (sql): starting 17
rlm_sql (sql): Attempting to connect rlm_sql_mysql #17
rlm_sql_mysql: Starting connect to MySQL server for #17
rlm_sql (sql): Connected new DB handle, #17
rlm_sql (sql): starting 18
rlm_sql (sql): Attempting to connect rlm_sql_mysql #18
rlm_sql_mysql: Starting connect to MySQL server for #18
rlm_sql (sql): Connected new DB handle, #18
rlm_sql (sql): starting 19
rlm_sql (sql): Attempting to connect rlm_sql_mysql #19
rlm_sql_mysql: Starting connect to MySQL server for #19
rlm_sql (sql): Connected new DB handle, #19
rlm_sql (sql): starting 20
rlm_sql (sql): Attempting to connect rlm_sql_mysql #20
rlm_sql_mysql: Starting connect to MySQL server for #20
rlm_sql (sql): Connected new DB handle, #20
rlm_sql (sql): starting 21
rlm_sql (sql): Attempting to connect rlm_sql_mysql #21
rlm_sql_mysql: Starting connect to MySQL server for #21
rlm_sql (sql): Connected new DB handle, #21
rlm_sql (sql): starting 22
rlm_sql (sql): Attempting to connect rlm_sql_mysql #22
rlm_sql_mysql: Starting connect to MySQL server for #22
rlm_sql (sql): Connected new DB handle, #22
rlm_sql (sql): starting 23
rlm_sql (sql): Attempting to connect rlm_sql_mysql #23
rlm_sql_mysql: Starting connect to MySQL server for #23
rlm_sql (sql): Connected new DB handle, #23
rlm_sql (sql): starting 24
rlm_sql (sql): Attempting to connect rlm_sql_mysql #24
rlm_sql_mysql: Starting connect to MySQL server for #24
rlm_sql (sql): Connected new DB handle, #24
rlm_sql (sql): starting 25
rlm_sql (sql): Attempting to connect rlm_sql_mysql #25
rlm_sql_mysql: Starting connect to MySQL server for #25
rlm_sql (sql): Connected new DB handle, #25
rlm_sql (sql): starting 26
rlm_sql (sql): Attempting to connect rlm_sql_mysql #26
rlm_sql_mysql: Starting connect to MySQL server for #26
rlm_sql (sql): Connected new DB handle, #26
rlm_sql (sql): starting 27
rlm_sql (sql): Attempting to connect rlm_sql_mysql #27
rlm_sql_mysql: Starting connect to MySQL server for #27
rlm_sql (sql): Connected new DB handle, #27
rlm_sql (sql): starting 28
rlm_sql (sql): Attempting to connect rlm_sql_mysql #28
rlm_sql_mysql: Starting connect to MySQL server for #28
rlm_sql (sql): Connected new DB handle, #28
rlm_sql (sql): starting 29
rlm_sql (sql): Attempting to connect rlm_sql_mysql #29
rlm_sql_mysql: Starting connect to MySQL server for #29
rlm_sql (sql): Connected new DB handle, #29
rlm_sql (sql): starting 30
rlm_sql (sql): Attempting to connect rlm_sql_mysql #30
rlm_sql_mysql: Starting connect to MySQL server for #30
rlm_sql (sql): Connected new DB handle, #30
rlm_sql (sql): starting 31
rlm_sql (sql): Attempting to connect rlm_sql_mysql #31
rlm_sql_mysql: Starting connect to MySQL server for #31
rlm_sql (sql): Connected new DB handle, #31
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier,
NAS-Port"
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/raddb/modules/files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
reading pairlist file /etc/raddb/users
reading pairlist file /etc/raddb/acct_users
reading pairlist file /etc/raddb/preproxy_users
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/raddb/modules/detail
detail {
detailfile =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/attrs.accounting_response
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
reading pairlist file /etc/raddb/attrs.access_reject
} # modules
} # server
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
server dynamic_client_server { # from file
/etc/raddb/sites-enabled/dynamic-clients
modules {
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_dynamic_clients
Module: Instantiating module "dynamic_clients" from file
/etc/raddb/modules/dynamic_clients
Module: Linked to module rlm_always
Module: Instantiating module "ok" from file /etc/raddb/modules/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 40163
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 18.220.171.233 port 33477,
id=170, length=76
server dynamic_client_server {
} # server dynamic_client_server
- Cannot add client 18.220.171.233: Required attribute
"FreeRADIUS-Client-Secret" is missing.
Ignoring request to authentication address * port 1812 from unknown client
18.220.171.233 port 33477
Ready to process requests.
More information about the Freeradius-Users
mailing list