EAP-TTLS-PAP with LDAP Authentication to Azure AD Domain Services
IP
ip.infos at gmail.com
Tue Jul 9 17:30:29 CEST 2019
Dear list
I'm trying to authenticate wifi users from on-premise network with 802.1x
Freeradius 3.0 should be configured to accept eapol request with TTLS and
PAP
Backend is Azure AD Domain Services with LDAPS
>From Freeradius I've been able to run test with radtest and eapol_test
freeradius5 at freeradius5:~$ radtest -x -t pap un00.test ABCD1234 localhost 0
testing123
Sent Access-Request Id 29 from 0.0.0.0:49544 to 127.0.0.1:1812 length 79
User-Name = "un00.test"
User-Password = "ABCD1234"
NAS-IP-Address = 172.31.255.36
NAS-Port = 0
Message-Authenticator = 0x00
Cleartext-Password = "ABCD1234"
Received Access-Accept Id 29 from 127.0.0.1:1812 to 0.0.0.0:0 length 20
root at freeradius5:~# cat eap-ttls-pap.conf
network={
key_mgmt=WPA-EAP
eap=TTLS
identity="bob"
anonymous_identity="anonymous"
password="hello"
phase2="auth=PAP"
}
root at freeradius5:~# ./eapol_test -c eap-ttls-pap.conf -s testing123
[SNIP...]
EAP: EAP entering state RECEIVED
EAP: Received EAP-Success
EAP: Status notification: completion (param=success)
EAP: EAP entering state SUCCESS
CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully
EAPOL: IEEE 802.1X for plaintext connection; no EAPOL-Key frames required
WPA: EAPOL processing complete
Cancelling authentication timeout
State: DISCONNECTED -> COMPLETED
EAPOL: SUPP_PAE entering state AUTHENTICATED
EAPOL: SUPP_BE entering state RECEIVE
EAPOL: SUPP_BE entering state SUCCESS
EAPOL: SUPP_BE entering state IDLE
eapol_sm_cb: result=1
EAPOL: Successfully fetched key (len=32)
PMK from EAPOL - hexdump(len=32): 04 f5 4d 18 7f a9 c3 54 88 57 ba 64 12 42
6a 8f 66 c6 18 e0 ec 50 3e 99 c4 fd 47 8f d5 aa 66 c7
No EAP-Key-Name received from server
WPA: Clear old PMK and PTK
EAP: deinitialize previously used EAP method (21, TTLS) at EAP deinit
ENGINE: engine deinit
MPPE keys OK: 1 mismatch: 0
SUCCESS
However when I try from the supplicant (windows 10) configured for PAP,
I'm unable to authenticate
I see this warnings but I dont understand if they are the origin of the
issue
(3) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(3) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
The "admin" account that is configured to query the ldap belongw to the
group AAD DC Administrator
Need your help :-)
Here below the debug output
root at freeradius5:~# freeradius -X
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client private-network-1 {
ipaddr = 172.31.255.0/24
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
# Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "ldaps://ldap.server.it"
identity = "wifi2018 at server.onmicrosoft.com"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "dc=ldap,dc=server,dc=it"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_detail
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "ttls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
instantiate {
}
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "ldap" from file
/etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20445
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 55742
Listening on proxy address :: port 43685
Ready to process requests
(0) Received Access-Request Id 134 from 172.31.255.160:34632 to
172.31.255.36:1812 length 172
(0) User-Name = "un00.test"
(0) NAS-Port = 104
(0) Framed-MTU = 1400
(0) Called-Station-Id = "D8:84:66:7D:E7:53"
(0) Acct-Session-Id = "M1c0699610012"
(0) Calling-Station-Id = "B4:AE:2B:DE:55:E5"
(0) NAS-Port-Type = Wireless-802.11
(0) NAS-Identifier = "Test_NAC"
(0) Siemens-SSID = "Test_NAC"
(0) EAP-Message = 0x024b000e01756e30302e74657374
(0) Message-Authenticator = 0xfec82db3cc049df0ff675b9262c20594
(0) Proxy-State = 0x3637
(0) NAS-IP-Address = 172.31.255.160
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) if (!control:Auth-Type) {
(0) if (!control:Auth-Type) -> TRUE
(0) if (!control:Auth-Type) {
rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 276
seconds
rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 276
seconds
rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 276
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 276
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 275
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase
"spare"
rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Reserved connection (5)
(0) ldap: EXPAND (samAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap: --> (samAccountName=un00.test)
(0) ldap: Performing search in "dc=ldap,dc=server,dc=it" with filter
"(samAccountName=un00.test)", scope "sub"
(0) ldap: Waiting for search result...
Unable to chase referral "ldaps://
ForestDnsZones.ldap.server.it/DC=ForestDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
Unable to chase referral "ldaps://
DomainDnsZones.ldap.server.it/DC=DomainDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
(0) ldap: User object found at DN "CN=Uno Test,OU=AADDC
Users,DC=ldap,DC=server,DC=it"
(0) ldap: Processing user attributes
(0) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (5)
Need 2 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldaps://ldap.server.it:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) if (ok && User-Password) {
(0) if (ok && User-Password) -> FALSE
(0) } # if (!control:Auth-Type) = ok
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = ok
(0) } # policy filter_username = ok
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "un00.test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 75 length 14
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 76 length 6
(0) eap: EAP session adding &reply:State = 0xf3b4aa9bf3f8bf1c
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 134 from 172.31.255.36:1812 to
172.31.255.160:34632 length 0
(0) EAP-Message = 0x014c00061520
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xf3b4aa9bf3f8bf1cf0ce6bf327459305
(0) Proxy-State = 0x3637
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 163 from 172.31.255.160:34632 to
172.31.255.36:1812 length 333
(1) User-Name = "un00.test"
(1) NAS-Port = 104
(1) Framed-MTU = 1400
(1) Called-Station-Id = "D8:84:66:7D:E7:53"
(1) Acct-Session-Id = "M1c0699610012"
(1) Calling-Station-Id = "B4:AE:2B:DE:55:E5"
(1) NAS-Port-Type = Wireless-802.11
(1) NAS-Identifier = "Test_NAC"
(1) Siemens-SSID = "Test_NAC"
(1) EAP-Message =
0x024c009d158000000093160303008e0100008a03035d24af89af759c7f08464d4fef918d33d5be6e7149f55d9972f3e5ccb1fea56c00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000037000a00080006001d00170018000b000201
(1) State = 0xf3b4aa9bf3f8bf1cf0ce6bf327459305
(1) Message-Authenticator = 0x8f23d75d1719428aa538ed19e73f4eb2
(1) Proxy-State = 0x3532
(1) NAS-IP-Address = 172.31.255.160
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) if (!control:Auth-Type) {
(1) if (!control:Auth-Type) -> TRUE
(1) if (!control:Auth-Type) {
rlm_ldap (ldap): Reserved connection (5)
(1) ldap: EXPAND (samAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (samAccountName=un00.test)
(1) ldap: Performing search in "dc=ldap,dc=server,dc=it" with filter
"(samAccountName=un00.test)", scope "sub"
(1) ldap: Waiting for search result...
Unable to chase referral "ldaps://
ForestDnsZones.ldap.server.it/DC=ForestDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
Unable to chase referral "ldaps://
DomainDnsZones.ldap.server.it/DC=DomainDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
(1) ldap: User object found at DN "CN=Uno Test,OU=AADDC
Users,DC=ldap,DC=server,DC=it"
(1) ldap: Processing user attributes
(1) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (5)
(1) [ldap] = ok
(1) if (ok && User-Password) {
(1) if (ok && User-Password) -> FALSE
(1) } # if (!control:Auth-Type) = ok
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = ok
(1) } # policy filter_username = ok
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "un00.test", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 76 length 157
(1) eap: Continuing tunnel setup
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xf3b4aa9bf3f8bf1c
(1) eap: Finished EAP session with state 0xf3b4aa9bf3f8bf1c
(1) eap: Previous EAP request found for state 0xf3b4aa9bf3f8bf1c, released
from the list
(1) eap: Peer sent packet with method EAP TTLS (21)
(1) eap: Calling submodule eap_ttls to process data
(1) eap_ttls: Authenticate
(1) eap_ttls: Continuing EAP-TLS
(1) eap_ttls: Peer indicated complete TLS record size will be 147 bytes
(1) eap_ttls: Got complete TLS record (147 bytes)
(1) eap_ttls: [eaptls verify] = length included
(1) eap_ttls: (other): before SSL initialization
(1) eap_ttls: TLS_accept: before SSL initialization
(1) eap_ttls: TLS_accept: before SSL initialization
(1) eap_ttls: <<< recv UNKNOWN TLS VERSION ?0304? [length 008e]
(1) eap_ttls: TLS_accept: SSLv3/TLS read client hello
(1) eap_ttls: >>> send TLS 1.2 [length 003d]
(1) eap_ttls: TLS_accept: SSLv3/TLS write server hello
(1) eap_ttls: >>> send TLS 1.2 [length 02e2]
(1) eap_ttls: TLS_accept: SSLv3/TLS write certificate
(1) eap_ttls: >>> send TLS 1.2 [length 014d]
(1) eap_ttls: TLS_accept: SSLv3/TLS write key exchange
(1) eap_ttls: >>> send TLS 1.2 [length 0004]
(1) eap_ttls: TLS_accept: SSLv3/TLS write server done
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server
done
(1) eap_ttls: In SSL Handshake Phase
(1) eap_ttls: In SSL Accept mode
(1) eap_ttls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 77 length 1004
(1) eap: EAP session adding &reply:State = 0xf3b4aa9bf2f9bf1c
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 163 from 172.31.255.36:1812 to
172.31.255.160:34632 length 0
(1) EAP-Message =
0x014d03ec15c000000484160303003d0200003903038dd2c159452c467e7daa10121140235690928e0f54ceeef587535f7eae349ceb00c030000011ff01000100000b0004030001020017000016030302e20b0002de0002db0002d8308202d4308201bca003020102020900e44b34342762c990300d0609
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xf3b4aa9bf2f9bf1cf0ce6bf327459305
(1) Proxy-State = 0x3532
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 70 from 172.31.255.160:34632 to
172.31.255.36:1812 length 181
(2) User-Name = "un00.test"
(2) NAS-Port = 104
(2) Framed-MTU = 1400
(2) Called-Station-Id = "D8:84:66:7D:E7:53"
(2) Acct-Session-Id = "M1c0699610012"
(2) Calling-Station-Id = "B4:AE:2B:DE:55:E5"
(2) NAS-Port-Type = Wireless-802.11
(2) NAS-Identifier = "Test_NAC"
(2) Siemens-SSID = "Test_NAC"
(2) EAP-Message = 0x024d00061500
(2) State = 0xf3b4aa9bf2f9bf1cf0ce6bf327459305
(2) Message-Authenticator = 0x8ebe96d3db3491e71de5138910fcd2bb
(2) Proxy-State = 0x37
(2) NAS-IP-Address = 172.31.255.160
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) if (!control:Auth-Type) {
(2) if (!control:Auth-Type) -> TRUE
(2) if (!control:Auth-Type) {
rlm_ldap (ldap): Reserved connection (6)
(2) ldap: EXPAND (samAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(2) ldap: --> (samAccountName=un00.test)
(2) ldap: Performing search in "dc=ldap,dc=server,dc=it" with filter
"(samAccountName=un00.test)", scope "sub"
(2) ldap: Waiting for search result...
Unable to chase referral "ldaps://
ForestDnsZones.ldap.server.it/DC=ForestDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
Unable to chase referral "ldaps://
DomainDnsZones.ldap.server.it/DC=DomainDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
(2) ldap: User object found at DN "CN=Uno Test,OU=AADDC
Users,DC=ldap,DC=server,DC=it"
(2) ldap: Processing user attributes
(2) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (6)
(2) [ldap] = ok
(2) if (ok && User-Password) {
(2) if (ok && User-Password) -> FALSE
(2) } # if (!control:Auth-Type) = ok
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = ok
(2) } # policy filter_username = ok
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "un00.test", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 77 length 6
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xf3b4aa9bf2f9bf1c
(2) eap: Finished EAP session with state 0xf3b4aa9bf2f9bf1c
(2) eap: Previous EAP request found for state 0xf3b4aa9bf2f9bf1c, released
from the list
(2) eap: Peer sent packet with method EAP TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Authenticate
(2) eap_ttls: Continuing EAP-TLS
(2) eap_ttls: Peer ACKed our handshake fragment
(2) eap_ttls: [eaptls verify] = request
(2) eap_ttls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 78 length 172
(2) eap: EAP session adding &reply:State = 0xf3b4aa9bf1fabf1c
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 70 from 172.31.255.36:1812 to
172.31.255.160:34632 length 0
(2) EAP-Message =
0x014e00ac15800000048490ed343453b2aee8729b44fdb8b3c24650a2b754c51c4f59a649208953408e4541a0242ad98783a30de0107e91c4b71dd17b97ef3aec60e00bda5b981821da5ec0c0ce4c9c64fa9d17c921f1c7edcdc09e4f297247b23ede921a071eab2b558a7e2b8d49d0ff08f458af1e5c08
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xf3b4aa9bf1fabf1cf0ce6bf327459305
(2) Proxy-State = 0x37
(2) Finished request
Waking up in 4.8 seconds.
(3) Received Access-Request Id 23 from 172.31.255.160:34632 to
172.31.255.36:1812 length 313
(3) User-Name = "un00.test"
(3) NAS-Port = 104
(3) Framed-MTU = 1400
(3) Called-Station-Id = "D8:84:66:7D:E7:53"
(3) Acct-Session-Id = "M1c0699610012"
(3) Calling-Station-Id = "B4:AE:2B:DE:55:E5"
(3) NAS-Port-Type = Wireless-802.11
(3) NAS-Identifier = "Test_NAC"
(3) Siemens-SSID = "Test_NAC"
(3) EAP-Message =
0x024e008815800000007e16030300461000004241047dd211b03be508f5fd7f8d1ec84b79141cbec6c3b4a2ade9a5240e41113bf46c85fd9597352f325006ccecb83d7816c9c06f7344f68199770854f5aa81052568140303000101160303002800000000000000004790cb4aaee351210a3e7fe0c27577
(3) State = 0xf3b4aa9bf1fabf1cf0ce6bf327459305
(3) Message-Authenticator = 0x20159fe94dd827fec34682060ffde4ed
(3) Proxy-State = 0x313937
(3) NAS-IP-Address = 172.31.255.160
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) if (!control:Auth-Type) {
(3) if (!control:Auth-Type) -> TRUE
(3) if (!control:Auth-Type) {
rlm_ldap (ldap): Reserved connection (5)
(3) ldap: EXPAND (samAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(3) ldap: --> (samAccountName=un00.test)
(3) ldap: Performing search in "dc=ldap,dc=server,dc=it" with filter
"(samAccountName=un00.test)", scope "sub"
(3) ldap: Waiting for search result...
Unable to chase referral "ldaps://
ForestDnsZones.ldap.server.it/DC=ForestDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
Unable to chase referral "ldaps://
DomainDnsZones.ldap.server.it/DC=DomainDnsZones,DC=ldap,DC=server,DC=it"
(-1: Can't contact LDAP server)
(3) ldap: User object found at DN "CN=Uno Test,OU=AADDC
Users,DC=ldap,DC=server,DC=it"
(3) ldap: Processing user attributes
(3) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(3) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (5)
(3) [ldap] = ok
(3) if (ok && User-Password) {
(3) if (ok && User-Password) -> FALSE
(3) } # if (!control:Auth-Type) = ok
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = ok
(3) } # policy filter_username = ok
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "un00.test", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 78 length 136
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xf3b4aa9bf1fabf1c
(3) eap: Finished EAP session with state 0xf3b4aa9bf1fabf1c
(3) eap: Previous EAP request found for state 0xf3b4aa9bf1fabf1c, released
from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: Peer indicated complete TLS record size will be 126 bytes
(3) eap_ttls: Got complete TLS record (126 bytes)
(3) eap_ttls: [eaptls verify] = length included
(3) eap_ttls: TLS_accept: SSLv3/TLS write server done
(3) eap_ttls: <<< recv TLS 1.2 [length 0046]
(3) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange
(3) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec
(3) eap_ttls: <<< recv TLS 1.2 [length 0010]
(3) eap_ttls: TLS_accept: SSLv3/TLS read finished
(3) eap_ttls: >>> send TLS 1.2 [length 0001]
(3) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec
(3) eap_ttls: >>> send TLS 1.2 [length 0010]
(3) eap_ttls: TLS_accept: SSLv3/TLS write finished
(3) eap_ttls: (other): SSL negotiation finished successfully
(3) eap_ttls: SSL Connection Established
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 79 length 61
(3) eap: EAP session adding &reply:State = 0xf3b4aa9bf0fbbf1c
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 23 from 172.31.255.36:1812 to
172.31.255.160:34632 length 0
(3) EAP-Message =
0x014f003d15800000003314030300010116030300280178c62ae269e3bf0af4a63f3291f362461a1f5c3fe87eb3ad1679017d49dae2fe5069633d2c6c22
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xf3b4aa9bf0fbbf1cf0ce6bf327459305
(3) Proxy-State = 0x313937
(3) Finished request
Waking up in 4.7 seconds.
(0) Cleaning up request packet ID 134 with timestamp +275
(1) Cleaning up request packet ID 163 with timestamp +276
(2) Cleaning up request packet ID 70 with timestamp +276
(3) Cleaning up request packet ID 23 with timestamp +276
Ready to process requests
--
Igor
More information about the Freeradius-Users
mailing list