radius to pam with 2FA from duo

[Andrew Meyer]

Hello,
I am trying to get FreeRADIUS working with 2FA.  I have it mostly setup.  I can see in the debug output that saying my user exists in the system.  However I'm still getting Access-Reject from my client.  

Here is the output from FreeRADIUS (using the FreeRADIUS repo):0) Received Access-Request Id 98 from 10.150.1.190:37142 to 10.150.1.153:1812 length 92
(0)   User-Name = "test"
(0)   User-Password = "Password!1234"
(0)   NAS-IP-Address = 10.150.1.190
(0)   NAS-Port = 0
(0)   Message-Authenticator = 0xef25474df3491218de56a2d8874cfe47
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0) files: Failed resolving GID: No error
(0) files: users: Matched entry DEFAULT at line 70
(0)     [files] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
Not doing PAP as Auth-Type is already set.
(0)     [pap] = noop
(0)   } # authorize = ok
(0) Found Auth-Type = pam
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) pam: Using pamauth string "radiusd" for pam.conf lookup
(0) pam: ERROR: pam_authenticate failed: Error in service module
(0)     [pam] = reject
(0)   } # authenticate = reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> test
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 98 from 10.150.1.153:1812 to 10.150.1.190:37142 length 20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 98 with timestamp +38
Ready to process requests

Here is my radiusd pam configuration

[root at radius01 ~]# cat /etc/pam.d/radiusd 
#%PAM-1.0
#auth       include     password-auth
auth       requisite    pam_duo.so forward_pass
account    required     pam_nologin.so
account    include      password-auth
password   include      password-auth
session    include      password-auth
[root at radius01 ~]# 


[test at console02 ~]$ radtest test Password!1234123456 10.150.1.153 0 password!
Sent Access-Request Id 98 from 0.0.0.0:37142 to 10.150.1.153:1812 length 92
        User-Name = "test"
        User-Password = "Password!1234123456"
        NAS-IP-Address = 10.150.1.190
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = "Password!1234123456"
Received Access-Reject Id 98 from 10.150.1.153:1812 to 0.0.0.0:0 length 20
(0) -: Expected Access-Accept got Access-Reject
[test at console02 ~]$

Should I have changed the radius pam config file?  Should I have changed the password-auth config file instead?  Eventually I want this work with SSH.