Google Secure LDAP
eko at flyingtongue.io
eko at flyingtongue.io
Tue Jun 11 20:07:49 CEST 2019
I'm attempting to use Google Secure LDAP solution for authentication and
authorization. I'm not able to use this with a supplicant such as a
laptop/phone, radtest is working fine which leads me to believe it's an
issue of the password being hashed by mschap.
I understand from reading previous threads that I need to use
EAP-TTLS-PAP or PEAP-GTC. How can I get freeradius to work with Google
Secure LDAP? When freeradius does do an ldap bind which user attribute
is it looking for? I think userPassword but in this case I don't think
it exists.
Full debug:
FreeRADIUS Version 3.0.12
Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file
/etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file
/etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/control
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client sz {
ipaddr = 10.0.32.55
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client wap1 {
ipaddr = 10.1.25.208
require_message_authenticator = no
secret = <<< secret >>>
shortname = "name"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = ldap
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_exec
# Loading module "exec" from file
/etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_detail
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_chap
# Loading module "chap" from file
/etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_ldap
# Loading module "ldap" from file
/etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "ldaps://ldap.google.com:636"
identity = "SomethingCrazy"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "dc=burro,dc=org"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
certificate_file = "/etc/freeradius/3.0/certs/ldap-client.crt"
private_key_file = "/etc/freeradius/3.0/certs/ldap-client.key"
start_tls = no
require_cert = "allow"
}
}
Creating attribute LDAP-Group
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loading module "echo" from file
/etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_files
# Loading module "files" from file
/etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile =
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_unix
# Loading module "unix" from file
/etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_utf8
# Loading module "utf8" from file
/etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_expr
# Loading module "expr" from file
/etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
}
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
instantiate {
}
# Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file
/etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check
item "FreeRADIUS-Response-Delay" found in filter list for realm
"DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check
item "FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "ldap" from file
/etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20444
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
ecdh_curve = "prime256v1"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server
inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 40729
Listening on proxy address :: port 42721
Ready to process requests
(0) Received Access-Request Id 82 from 10.1.25.208:58067 to
10.251.16.50:1812 length 289
(0) Acct-Session-Id = "5CFEDE60-1B69AD04"
(0) User-Name = "donkey"
(0) NAS-IP-Address = 10.1.25.208
(0) NAS-Identifier = "18-7C-0B-59-10-6C"
(0) NAS-Port = 1
(0) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(0) Calling-Station-Id = "28-F0-76-1A-05-C6"
(0) Service-Type = Framed-User
(0) Chargeable-User-Identity = 0x00
(0) NAS-Port-Type = Wireless-802.11
(0) Connect-Info = "CONNECT 802.11a/n/ac"
(0) EAP-Message = 0x0200000f016367726f73736b6f7066
(0) Ruckus-SSID = "STAFF1"
(0) Ruckus-BSSID = 0x187c0b59106c
(0) Ruckus-Wlan-Id = 5
(0) Ruckus-VLAN-ID = 16
(0) Ruckus-SCG-CBlade-IP = 167844299
(0) Ruckus-Zone-Name = "MAIN"
(0) Ruckus-Wlan-Name = "STAFF1"
(0) Message-Authenticator = 0xabb37aec732768bf882d3b1baf6df572
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 0 length 15
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 1 length 22
(0) eap: EAP session adding &reply:State = 0xeb0f33f9eb0e3761
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found. Ignoring.
(0) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(0) Sent Access-Challenge Id 82 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(0) EAP-Message = 0x010100160410b8b468348e0a4daf0ecc04e6949ae826
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xeb0f33f9eb0e3761ce83e6b60363ea34
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 83 from 10.1.25.208:58067 to
10.251.16.50:1812 length 300
(1) Acct-Session-Id = "5CFEDE60-1B69AD04"
(1) User-Name = "donkey"
(1) NAS-IP-Address = 10.1.25.208
(1) NAS-Identifier = "18-7C-0B-59-10-6C"
(1) NAS-Port = 1
(1) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(1) Calling-Station-Id = "28-F0-76-1A-05-C6"
(1) Service-Type = Framed-User
(1) Chargeable-User-Identity = 0x00
(1) NAS-Port-Type = Wireless-802.11
(1) Connect-Info = "CONNECT 802.11a/n/ac"
(1) EAP-Message = 0x020100080319152b
(1) State = 0xeb0f33f9eb0e3761ce83e6b60363ea34
(1) Ruckus-SSID = "STAFF1"
(1) Ruckus-BSSID = 0x187c0b59106c
(1) Ruckus-Wlan-Id = 5
(1) Ruckus-VLAN-ID = 16
(1) Ruckus-SCG-CBlade-IP = 167844299
(1) Ruckus-Zone-Name = "MAIN"
(1) Ruckus-Wlan-Name = "STAFF1"
(1) Message-Authenticator = 0x0b8b5b7266ea8d8f483e6f71936f9d69
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 1 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (uid=donkey)
(1) ldap: Performing search in "dc=burro,dc=org" with filter
"(uid=donkey)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN
"uid=donkey,ou=Animals,ou=Users,dc=burro,dc=org"
(1) ldap: Processing user attributes
(1) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(1) ldap: WARNING: PAP authentication will *NOT* work with Active
Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (0)
rlm_ldap (ldap): Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1) [ldap] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not
setting Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good"
password is available
(1) [pap] = noop
(1) if (User-Password) {
(1) if (User-Password) -> FALSE
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xeb0f33f9eb0e3761
(1) eap: Finished EAP session with state 0xeb0f33f9eb0e3761
(1) eap: Previous EAP request found for state 0xeb0f33f9eb0e3761,
released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 2 length 6
(1) eap: EAP session adding &reply:State = 0xeb0f33f9ea0d2a61
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found. Ignoring.
(1) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(1) Sent Access-Challenge Id 83 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(1) EAP-Message = 0x010200061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xeb0f33f9ea0d2a61ce83e6b60363ea34
(1) Finished request
Waking up in 4.1 seconds.
(2) Received Access-Request Id 84 from 10.1.25.208:58067 to
10.251.16.50:1812 length 453
(2) Acct-Session-Id = "5CFEDE60-1B69AD04"
(2) User-Name = "donkey"
(2) NAS-IP-Address = 10.1.25.208
(2) NAS-Identifier = "18-7C-0B-59-10-6C"
(2) NAS-Port = 1
(2) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(2) Calling-Station-Id = "28-F0-76-1A-05-C6"
(2) Service-Type = Framed-User
(2) Chargeable-User-Identity = 0x00
(2) NAS-Port-Type = Wireless-802.11
(2) Connect-Info = "CONNECT 802.11a/n/ac"
(2) EAP-Message =
0x020200a119800000009716030100920100008e03035cfede6254095d49bd63bd295e703470aa11619b0acf539a1e28ac5cc475f25100002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a000
(2) State = 0xeb0f33f9ea0d2a61ce83e6b60363ea34
(2) Ruckus-SSID = "STAFF1"
(2) Ruckus-BSSID = 0x187c0b59106c
(2) Ruckus-Wlan-Id = 5
(2) Ruckus-VLAN-ID = 16
(2) Ruckus-SCG-CBlade-IP = 167844299
(2) Ruckus-Zone-Name = "MAIN"
(2) Ruckus-Wlan-Name = "STAFF1"
(2) Message-Authenticator = 0xd60bcb324cd87ecd8dfec4a8e4a58544
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 2 length 161
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xeb0f33f9ea0d2a61
(2) eap: Finished EAP session with state 0xeb0f33f9ea0d2a61
(2) eap: Previous EAP request found for state 0xeb0f33f9ea0d2a61,
released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 151 bytes
(2) eap_peap: Got complete TLS record (151 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv TLS 1.2 [length 0092]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2 [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2 [length 02f1]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1004
(2) eap: EAP session adding &reply:State = 0xeb0f33f9e90c2a61
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found. Ignoring.
(2) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(2) Sent Access-Challenge Id 84 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(2) EAP-Message =
0x010303ec19c000000493160303003d020000390303ec4487452b5f1fb5ba794059ea0d6d5b877ae2e899921074222b5d1f847af2d600c030000011ff01000100000b0004030001020017000016030302f10b0002ed0002ea0002e7308202e3308201cba0030201020209009
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xeb0f33f9e90c2a61ce83e6b60363ea34
(2) Finished request
Waking up in 4.1 seconds.
(3) Received Access-Request Id 85 from 10.1.25.208:58067 to
10.251.16.50:1812 length 298
(3) Acct-Session-Id = "5CFEDE60-1B69AD04"
(3) User-Name = "donkey"
(3) NAS-IP-Address = 10.1.25.208
(3) NAS-Identifier = "18-7C-0B-59-10-6C"
(3) NAS-Port = 1
(3) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(3) Calling-Station-Id = "28-F0-76-1A-05-C6"
(3) Service-Type = Framed-User
(3) Chargeable-User-Identity = 0x00
(3) NAS-Port-Type = Wireless-802.11
(3) Connect-Info = "CONNECT 802.11a/n/ac"
(3) EAP-Message = 0x020300061900
(3) State = 0xeb0f33f9e90c2a61ce83e6b60363ea34
(3) Ruckus-SSID = "STAFF1"
(3) Ruckus-BSSID = 0x187c0b59106c
(3) Ruckus-Wlan-Id = 5
(3) Ruckus-VLAN-ID = 16
(3) Ruckus-SCG-CBlade-IP = 167844299
(3) Ruckus-Zone-Name = "MAIN"
(3) Ruckus-Wlan-Name = "STAFF1"
(3) Message-Authenticator = 0x00bfef65f6da6de45b7e7c344ca914fd
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xeb0f33f9e90c2a61
(3) eap: Finished EAP session with state 0xeb0f33f9e90c2a61
(3) eap: Previous EAP request found for state 0xeb0f33f9e90c2a61,
released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 183
(3) eap: EAP session adding &reply:State = 0xeb0f33f9e80b2a61
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found. Ignoring.
(3) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(3) Sent Access-Challenge Id 85 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(3) EAP-Message =
0x010400b71900a1a29b66f95de8004c8245181cbf9f23b4a7d479292bfa74962a915dd8774a2523676d92f7dfa80932789370c76b891e274a0344206e5d5072ada0c21a8921e6b74fcf47341dc2c57863a6c600eba45681356a575c5953296da0275684325a4ac411b224b64
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xeb0f33f9e80b2a61ce83e6b60363ea34
(3) Finished request
Waking up in 4.1 seconds.
(4) Received Access-Request Id 86 from 10.1.25.208:58067 to
10.251.16.50:1812 length 428
(4) Acct-Session-Id = "5CFEDE60-1B69AD04"
(4) User-Name = "donkey"
(4) NAS-IP-Address = 10.1.25.208
(4) NAS-Identifier = "18-7C-0B-59-10-6C"
(4) NAS-Port = 1
(4) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(4) Calling-Station-Id = "28-F0-76-1A-05-C6"
(4) Service-Type = Framed-User
(4) Chargeable-User-Identity = 0x00
(4) NAS-Port-Type = Wireless-802.11
(4) Connect-Info = "CONNECT 802.11a/n/ac"
(4) EAP-Message =
0x0204008819800000007e16030300461000004241046a8ce96dd2e79dcf4274695af82e3429db8cf218baea8842e877d8e53d5af5ad90d0ca34a7bedd750d51282438e22b40376bb2c7658ea62e5e44a9a0b364d1611403030001011603030028ac32e57bfad56383076dd17
(4) State = 0xeb0f33f9e80b2a61ce83e6b60363ea34
(4) Ruckus-SSID = "STAFF1"
(4) Ruckus-BSSID = 0x187c0b59106c
(4) Ruckus-Wlan-Id = 5
(4) Ruckus-VLAN-ID = 16
(4) Ruckus-SCG-CBlade-IP = 167844299
(4) Ruckus-Zone-Name = "MAIN"
(4) Ruckus-Wlan-Name = "STAFF1"
(4) Message-Authenticator = 0x91fe336e00013ce58b87218e146eb362
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 4 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xeb0f33f9e80b2a61
(4) eap: Finished EAP session with state 0xeb0f33f9e80b2a61
(4) eap: Previous EAP request found for state 0xeb0f33f9e80b2a61,
released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2 [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2 [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 57
(4) eap: EAP session adding &reply:State = 0xeb0f33f9ef0a2a61
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found. Ignoring.
(4) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(4) Sent Access-Challenge Id 86 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(4) EAP-Message =
0x01050039190014030300010116030300280b2330975c35e8e635f254e800229cae0fe90eb8b7fe5ddccc04fa2a79902a3a72ee710e8af88deb
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xeb0f33f9ef0a2a61ce83e6b60363ea34
(4) Finished request
Waking up in 4.1 seconds.
(5) Received Access-Request Id 87 from 10.1.25.208:58067 to
10.251.16.50:1812 length 298
(5) Acct-Session-Id = "5CFEDE60-1B69AD04"
(5) User-Name = "donkey"
(5) NAS-IP-Address = 10.1.25.208
(5) NAS-Identifier = "18-7C-0B-59-10-6C"
(5) NAS-Port = 1
(5) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(5) Calling-Station-Id = "28-F0-76-1A-05-C6"
(5) Service-Type = Framed-User
(5) Chargeable-User-Identity = 0x00
(5) NAS-Port-Type = Wireless-802.11
(5) Connect-Info = "CONNECT 802.11a/n/ac"
(5) EAP-Message = 0x020500061900
(5) State = 0xeb0f33f9ef0a2a61ce83e6b60363ea34
(5) Ruckus-SSID = "STAFF1"
(5) Ruckus-BSSID = 0x187c0b59106c
(5) Ruckus-Wlan-Id = 5
(5) Ruckus-VLAN-ID = 16
(5) Ruckus-SCG-CBlade-IP = 167844299
(5) Ruckus-Zone-Name = "MAIN"
(5) Ruckus-Wlan-Name = "STAFF1"
(5) Message-Authenticator = 0x482575750aa8d6d755fec98b2f0e9b5c
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 5 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0xeb0f33f9ef0a2a61
(5) eap: Finished EAP session with state 0xeb0f33f9ef0a2a61
(5) eap: Previous EAP request found for state 0xeb0f33f9ef0a2a61,
released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 6 length 40
(5) eap: EAP session adding &reply:State = 0xeb0f33f9ee092a61
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) Post-Auth-Type sub-section not found. Ignoring.
(5) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(5) Sent Access-Challenge Id 87 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(5) EAP-Message =
0x010600281900170303001d0b2330975c35e8e771c29d08efbd904f285fc7913a39771a0666079800
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xeb0f33f9ee092a61ce83e6b60363ea34
(5) Finished request
Waking up in 4.1 seconds.
(6) Received Access-Request Id 88 from 10.1.25.208:58067 to
10.251.16.50:1812 length 338
(6) Acct-Session-Id = "5CFEDE60-1B69AD04"
(6) User-Name = "donkey"
(6) NAS-IP-Address = 10.1.25.208
(6) NAS-Identifier = "18-7C-0B-59-10-6C"
(6) NAS-Port = 1
(6) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(6) Calling-Station-Id = "28-F0-76-1A-05-C6"
(6) Service-Type = Framed-User
(6) Chargeable-User-Identity = 0x00
(6) NAS-Port-Type = Wireless-802.11
(6) Connect-Info = "CONNECT 802.11a/n/ac"
(6) EAP-Message =
0x0206002e19001703030023ac32e57bfad5638438fe9d07fadaa4d125b8ba070d562d74853d930c154f60657b8f76
(6) State = 0xeb0f33f9ee092a61ce83e6b60363ea34
(6) Ruckus-SSID = "STAFF1"
(6) Ruckus-BSSID = 0x187c0b59106c
(6) Ruckus-Wlan-Id = 5
(6) Ruckus-VLAN-ID = 16
(6) Ruckus-SCG-CBlade-IP = 167844299
(6) Ruckus-Zone-Name = "MAIN"
(6) Ruckus-Wlan-Name = "STAFF1"
(6) Message-Authenticator = 0x6f6fa288d194d0df748524c52c8d175a
(6) session-state: No cached attributes
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 46
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0xeb0f33f9ee092a61
(6) eap: Finished EAP session with state 0xeb0f33f9ee092a61
(6) eap: Previous EAP request found for state 0xeb0f33f9ee092a61,
released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - donkey
(6) eap_peap: Got inner identity 'donkey'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x0206000f016367726f73736b6f7066
(6) eap_peap: Setting User-Name to donkey
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x0206000f016367726f73736b6f7066
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "donkey"
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x0206000f016367726f73736b6f7066
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "donkey"
(6) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 6 length 15
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 7 length 43
(6) eap: EAP session adding &reply:State = 0x51e14a5951e65099
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message =
0x0107002b1a0107002610f20e6c7657e18ddf266e1644efa62536667265657261646975732d332e302e3132
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x51e14a5951e650990b18921f653a810f
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message =
0x0107002b1a0107002610f20e6c7657e18ddf266e1644efa62536667265657261646975732d332e302e3132
(6) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(6) eap_peap: State = 0x51e14a5951e650990b18921f653a810f
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message =
0x0107002b1a0107002610f20e6c7657e18ddf266e1644efa62536667265657261646975732d332e302e3132
(6) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(6) eap_peap: State = 0x51e14a5951e650990b18921f653a810f
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 7 length 74
(6) eap: EAP session adding &reply:State = 0xeb0f33f9ed082a61
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) Post-Auth-Type sub-section not found. Ignoring.
(6) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(6) Sent Access-Challenge Id 88 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(6) EAP-Message =
0x0107004a1900170303003f0b2330975c35e8e8b2276f20245b6124662b9bd8da19f4c47411a4d7d0d6e10d45ba35319ae5c54e0246619deb19b66b16242f32cd16f225578e40dc8a3e98
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xeb0f33f9ed082a61ce83e6b60363ea34
(6) Finished request
Waking up in 4.1 seconds.
(7) Received Access-Request Id 89 from 10.1.25.208:58067 to
10.251.16.50:1812 length 392
(7) Acct-Session-Id = "5CFEDE60-1B69AD04"
(7) User-Name = "donkey"
(7) NAS-IP-Address = 10.1.25.208
(7) NAS-Identifier = "18-7C-0B-59-10-6C"
(7) NAS-Port = 1
(7) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(7) Calling-Station-Id = "28-F0-76-1A-05-C6"
(7) Service-Type = Framed-User
(7) Chargeable-User-Identity = 0x00
(7) NAS-Port-Type = Wireless-802.11
(7) Connect-Info = "CONNECT 802.11a/n/ac"
(7) EAP-Message =
0x0207006419001703030059ac32e57bfad563851bc9fd7df25ee6a60f93167a11020bd796065bbd01c5b3b3ee291d68be4e15fc291bb850fd90b90f39b0f7b13da7ea3ab0474b00e2d57f275110390d0cc8e1f1ee29a05a06fa88a88c8a785e6bb8d34bad
(7) State = 0xeb0f33f9ed082a61ce83e6b60363ea34
(7) Ruckus-SSID = "STAFF1"
(7) Ruckus-BSSID = 0x187c0b59106c
(7) Ruckus-Wlan-Id = 5
(7) Ruckus-VLAN-ID = 16
(7) Ruckus-SCG-CBlade-IP = 167844299
(7) Ruckus-Zone-Name = "MAIN"
(7) Ruckus-Wlan-Name = "STAFF1"
(7) Message-Authenticator = 0xdf8fc6ae10cd2b42cd387a757861c295
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 100
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x51e14a5951e65099
(7) eap: Finished EAP session with state 0xeb0f33f9ed082a61
(7) eap: Previous EAP request found for state 0xeb0f33f9ed082a61,
released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message =
0x020700451a02070040317e26162a2707abeccaa28862ac0e39fa0000000000000000012a7f3c674b2789fe5f5cbc6218f4bb866415ba3d123f94006367726f73736b6f7066
(7) eap_peap: Setting User-Name to donkey
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message =
0x020700451a02070040317e26162a2707abeccaa28862ac0e39fa0000000000000000012a7f3c674b2789fe5f5cbc6218f4bb866415ba3d123f94006367726f73736b6f7066
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "donkey"
(7) eap_peap: State = 0x51e14a5951e650990b18921f653a810f
(7) Virtual server inner-tunnel received request
(7) EAP-Message =
0x020700451a02070040317e26162a2707abeccaa28862ac0e39fa0000000000000000012a7f3c674b2789fe5f5cbc6218f4bb866415ba3d123f94006367726f73736b6f7066
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "donkey"
(7) State = 0x51e14a5951e650990b18921f653a810f
(7) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 7 length 69
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap: --> (uid=donkey)
(7) ldap: Performing search in "dc=burro,dc=org" with filter
"(uid=donkey)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN
"uid=donkey,ou=Animals,ou=Users,dc=burro,dc=org"
(7) ldap: Processing user attributes
(7) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(7) ldap: WARNING: PAP authentication will *NOT* work with Active
Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (1)
(7) [ldap] = ok
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) if (User-Password) {
(7) if (User-Password) -> FALSE
(7) [mschap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0x51e14a5951e65099
(7) eap: Finished EAP session with state 0x51e14a5951e65099
(7) eap: Previous EAP request found for state 0x51e14a5951e65099,
released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2: authenticate {
(7) mschap: WARNING: No Cleartext-Password configured. Cannot create
NT-Password
(7) mschap: WARNING: No Cleartext-Password configured. Cannot create
LM-Password
(7) mschap: Creating challenge hash with username: donkey
(7) mschap: Client is using MS-CHAPv2
(7) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform
authentication
(7) mschap: ERROR: MS-CHAP2-Response is incorrect
(7) [mschap] = reject
(7) } # authenticate = reject
(7) eap: Sending EAP Failure (code 4) ID 7 length 4
(7) eap: Freeing handler
(7) [eap] = reject
(7) } # authenticate = reject
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> donkey
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) update outer.session-state {
(7) &Module-Failure-Message := &request:Module-Failure-Message
-> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication'
(7) } # update outer.session-state = noop
(7) } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) MS-CHAP-Error = "\007E=691 R=1 C=5655d99e064e2256aa10e59df3860df7
V=3 M=Authentication failed"
(7) EAP-Message = 0x04070004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap: MS-CHAP-Error = "\007E=691 R=1
C=5655d99e064e2256aa10e59df3860df7 V=3 M=Authentication failed"
(7) eap_peap: EAP-Message = 0x04070004
(7) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap: MS-CHAP-Error = "\007E=691 R=1
C=5655d99e064e2256aa10e59df3860df7 V=3 M=Authentication failed"
(7) eap_peap: EAP-Message = 0x04070004
(7) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 8 length 46
(7) eap: EAP session adding &reply:State = 0xeb0f33f9ec072a61
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) Post-Auth-Type sub-section not found. Ignoring.
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(7) session-state: Saving cached attributes
(7) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password.
Cannot perform authentication"
(7) Sent Access-Challenge Id 89 from 10.251.16.50:1812 to
10.1.25.208:58067 length 0
(7) EAP-Message =
0x0108002e190017030300230b2330975c35e8e9ddf79f42ef6e7756557b1d7292d8d6a7939dba671186bc3157b4e5
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xeb0f33f9ec072a61ce83e6b60363ea34
(7) Finished request
Waking up in 3.8 seconds.
(8) Received Access-Request Id 90 from 10.1.25.208:58067 to
10.251.16.50:1812 length 338
(8) Acct-Session-Id = "5CFEDE60-1B69AD04"
(8) User-Name = "donkey"
(8) NAS-IP-Address = 10.1.25.208
(8) NAS-Identifier = "18-7C-0B-59-10-6C"
(8) NAS-Port = 1
(8) Called-Station-Id = "18-7C-0B-59-10-6C:STAFF1"
(8) Calling-Station-Id = "28-F0-76-1A-05-C6"
(8) Service-Type = Framed-User
(8) Chargeable-User-Identity = 0x00
(8) NAS-Port-Type = Wireless-802.11
(8) Connect-Info = "CONNECT 802.11a/n/ac"
(8) EAP-Message =
0x0208002e19001703030023ac32e57bfad5638652a9471fbb614c7521ccdcdcf2cb7b6bb38d0350bcc3f6c0bc0c64
(8) State = 0xeb0f33f9ec072a61ce83e6b60363ea34
(8) Ruckus-SSID = "STAFF1"
(8) Ruckus-BSSID = 0x187c0b59106c
(8) Ruckus-Wlan-Id = 5
(8) Ruckus-VLAN-ID = 16
(8) Ruckus-SCG-CBlade-IP = 167844299
(8) Ruckus-Zone-Name = "MAIN"
(8) Ruckus-Wlan-Name = "STAFF1"
(8) Message-Authenticator = 0x3103c46759b6d6f8e2b7b6241363c9cc
(8) Restoring &session-state
(8) &session-state:Module-Failure-Message := "mschap: FAILED: No
NT/LM-Password. Cannot perform authentication"
(8) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "donkey", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 8 length 46
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0xeb0f33f9ec072a61
(8) eap: Finished EAP session with state 0xeb0f33f9ec072a61
(8) eap: Previous EAP request found for state 0xeb0f33f9ec072a61,
released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap: The users session was previously rejected: returning
reject (again.)
(8) eap_peap: This means you need to read the PREVIOUS messages in the
debug output
(8) eap_peap: to find out the reason why the user was rejected
(8) eap_peap: Look for "reject" or "fail". Those earlier messages
will tell you
(8) eap_peap: what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
failed
(8) eap: Sending EAP Failure (code 4) ID 8 length 4
(8) eap: Failed in EAP select
(8) [eap] = invalid
(8) } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file
/etc/freeradius/3.0/sites-enabled/default
(8) Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject: --> donkey
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8) [attr_filter.access_reject] = updated
(8) [eap] = noop
(8) policy remove_reply_message_if_eap {
(8) if (&reply:EAP-Message && &reply:Reply-Message) {
(8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(8) else {
(8) [noop] = noop
(8) } # else = noop
(8) } # policy remove_reply_message_if_eap = noop
(8) } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 90 from 10.251.16.50:1812 to 10.1.25.208:58067
length 44
(8) EAP-Message = 0x04080004
(8) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 2.8 seconds.
(0) Cleaning up request packet ID 82 with timestamp +11
Waking up in 0.8 seconds.
(1) Cleaning up request packet ID 83 with timestamp +11
(2) Cleaning up request packet ID 84 with timestamp +12
(3) Cleaning up request packet ID 85 with timestamp +12
(4) Cleaning up request packet ID 86 with timestamp +12
(5) Cleaning up request packet ID 87 with timestamp +12
(6) Cleaning up request packet ID 88 with timestamp +12
Waking up in 0.2 seconds.
(7) Cleaning up request packet ID 89 with timestamp +12
(8) Cleaning up request packet ID 90 with timestamp +12
Ready to process requests
More information about the Freeradius-Users
mailing list