Working With EAP-TTLS, and LDAP
Nate .
nate2077developer at gmail.com
Fri Mar 8 19:02:28 CET 2019
Sorry for the delay. I've updated the files, LDAP is working now, I'm sorry
I didn't catch that part in the configuration, I feel slightly overwhelmed.
Good news though, LDAP is working using "radtest -t pap" and without the
"-t pap".
I've gone ahead and tested via the Wireless controller now, and I am
seeing..
(9) mschap: WARNING: No Cleartext-Password configured. Cannot create
NT-Password
(9) mschap: WARNING: No Cleartext-Password configured. Cannot create
LM-Password
and
(9) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(9) mschap: ERROR: MS-CHAP2-Response is incorrect
Now, I know there's a way to map attributes using the LDAP modules 'update'
section, but I have no idea how this works and I also do not know what
googles structure is. So if this is the route I have to take, I'll have to
do a bit of research on that then. I feel like that's what the problem is
here, but at the same time, Authentication via radtest was successful, so I
am having doubts.
I've attached a full log of me connecting via WIFI for convenience.
On Fri, Mar 8, 2019 at 12:05 PM Alan DeKok <aland at deployingradius.com>
wrote:
> On Mar 8, 2019, at 12:01 PM, Nate . <nate2077developer at gmail.com> wrote:
> >
> > Ok, duly noted. I've restored the defaults. Migrated settings for
> > certificates, and the LDAP. Now my LDAP isn't working anymore. Where am I
> > looking to edit first so that I can begin testing and not accidentally
> jump
> > ahead of myself?
> > I added the flat file user, as many recommend, that's working. "radtest
> > flatuser testpass 127.0.0.1 0 testing123"
> > When I run the test using my LDAP credentials I get "ERROR: No Auth-Type
> > found: rejecting the user via Post-Auth-Type = Reject"
>
> See mods-available/ldap. It has documentation on how to fix this. Look
> for "Auth-Type".
>
> You will also need to uncomment the "Auth-Type LDAP" block
> sites-enabled/default, in the "authenticate" section.
>
> Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-------------- next part --------------
root at freeradius:/etc/freeradius/3.0# freeradius -X
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/accounting
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 192.000.000.20/32 {
ipaddr = 192.000.000.20
ipv4addr = 192.000.000.20
require_message_authenticator = no
secret = <<< secret >>>
shortname = "HPWireless"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client DEVFreeRadius {
ipaddr = 192.000.000.252
ipv4addr = 192.000.000.252
require_message_authenticator = no
secret = <<< secret >>>
shortname = "DEVFreeRadius"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client ldap_<SNIP>_<SNIP>_static {
ipaddr = 10.000.000.81
ipv4addr = 10.000.000.81
require_message_authenticator = no
secret = <<< secret >>>
shortname = "LDAPTest"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loading module "linelog_recv_request" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_recv_request {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Recv-Request, %{pairs:request:}"
}
# Loading module "linelog_send_accept" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_send_accept {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Send-Accept, %{pairs:request:}"
}
# Loading module "linelog_send_reject" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_send_reject {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Send-Reject, %{pairs:request:}"
}
# Loading module "linelog_send_proxy_request" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_send_proxy_request {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Send-Proxy-Request, %{pairs:proxy-request:}"
}
# Loading module "linelog_recv_proxy_response" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_recv_proxy_response {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
reference = "messages.%{proxy-reply:Response-Packet-Type}"
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "ldaps://ldap.google.com:636"
identity = "<SNIP>"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "dc=<SNIP>,dc=<SNIP>"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
certificate_file = "/etc/freeradius/3.0/certs/ldap-client.pem"
private_key_file = "/etc/freeradius/3.0/certs/ldap-client.pem"
start_tls = no
require_cert = "allow"
}
}
Creating attribute LDAP-Group
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
instantiate {
}
# Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/3.0/certs/server.key"
certificate_file = "/etc/freeradius/3.0/certs/server.pem"
ca_file = "/etc/freeradius/3.0/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = yes
lifetime = 48
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_recv_request" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_send_accept" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_send_reject" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_send_proxy_request" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_recv_proxy_response" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20445
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
rlm_ldap (ldap): Couldn't find configuration for post-auth, will return NOOP for calls from this section
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:332
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 55701
Listening on proxy address :: port 34070
Ready to process requests
(0) Received Access-Request Id 192 from 192.000.000.20:41064 to 192.000.000.111:1812 length 320
(0) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-83-00-0B-70-AA"
(0) Acct-Session-Id = "1aa86de4-00004313"
(0) NAS-Port = 13523
(0) NAS-Port-Type = Wireless-802.11
(0) NAS-Identifier = "SSO Wireless"
(0) NAS-IP-Address = 192.000.000.100
(0) Framed-MTU = 1496
(0) User-Name = "<SNIP>"
(0) Calling-Station-Id = "24-F6-77-12-29-F8"
(0) Called-Station-Id = "D8-9D-67-4E-87-C6"
(0) Service-Type = Framed-User
(0) EAP-Message = 0x0252000b016e74726f6e65
(0) Colubris-AVPair = "ssid=Weefee"
(0) Colubris-AVPair = "incoming-vlan-id=10"
(0) Colubris-AVPair = "group=<SNIP>"
(0) Colubris-AVPair = "phytype=IEEE802dot11n"
(0) Attr-26.8744.250 = 0x00000001
(0) Attr-26.8744.249 = 0x0a0b6f51
(0) Message-Authenticator = 0x9495db1b75f6622c129eccb6fba84a09
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 82 length 11
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 83 length 22
(0) eap: EAP session adding &reply:State = 0x5be9f6fb5bbaf2fa
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 192 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(0) EAP-Message = 0x01530016041055086952d0af14e55368626089d0a7e7
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x5be9f6fb5bbaf2fab461784981381d93
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 192 with timestamp +71
Ready to process requests
(1) Received Access-Request Id 67 from 192.000.000.20:41064 to 192.000.000.111:1812 length 320
(1) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(1) Acct-Session-Id = "60090550-00004314"
(1) NAS-Port = 13524
(1) NAS-Port-Type = Wireless-802.11
(1) NAS-Identifier = "SSO Wireless"
(1) NAS-IP-Address = 192.000.000.100
(1) Framed-MTU = 1496
(1) User-Name = "<SNIP>"
(1) Calling-Station-Id = "24-F6-77-12-29-F8"
(1) Called-Station-Id = "D8-9D-67-4E-87-C6"
(1) Service-Type = Framed-User
(1) EAP-Message = 0x0255000b016e74726f6e65
(1) Colubris-AVPair = "ssid=Weefee"
(1) Colubris-AVPair = "incoming-vlan-id=10"
(1) Colubris-AVPair = "group=<SNIP>"
(1) Colubris-AVPair = "phytype=IEEE802dot11n"
(1) Attr-26.8744.250 = 0x00000001
(1) Attr-26.8744.249 = 0x0a0b6f51
(1) Message-Authenticator = 0x212003684e2a58d1f7cbc0dd276aea47
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 85 length 11
(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Peer sent packet with method EAP Identity (1)
(1) eap: Calling submodule eap_md5 to process data
(1) eap_md5: Issuing MD5 Challenge
(1) eap: Sending EAP Request (code 1) ID 86 length 22
(1) eap: EAP session adding &reply:State = 0xb4480576b41e01d8
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 67 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(1) EAP-Message = 0x0156001604106f7b0b3d8b5e9e86323e452f477c1014
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xb4480576b41e01d80cc3e0539387be27
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 177 from 192.000.000.20:41064 to 192.000.000.111:1812 length 335
(2) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(2) Acct-Session-Id = "60090550-00004314"
(2) NAS-Port = 13524
(2) NAS-Port-Type = Wireless-802.11
(2) NAS-Identifier = "SSO Wireless"
(2) NAS-IP-Address = 192.000.000.100
(2) Framed-MTU = 1496
(2) User-Name = "<SNIP>"
(2) Calling-Station-Id = "24-F6-77-12-29-F8"
(2) Called-Station-Id = "D8-9D-67-4E-87-C6"
(2) Service-Type = Framed-User
(2) EAP-Message = 0x025600080319152b
(2) State = 0xb4480576b41e01d80cc3e0539387be27
(2) Colubris-AVPair = "ssid=Weefee"
(2) Colubris-AVPair = "incoming-vlan-id=10"
(2) Colubris-AVPair = "group=<SNIP>"
(2) Colubris-AVPair = "phytype=IEEE802dot11n"
(2) Attr-26.8744.250 = 0x00000001
(2) Attr-26.8744.249 = 0x0a0b6f51
(2) Message-Authenticator = 0xf34b4b3325ce0d84aa426102cabb6ac2
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 86 length 8
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2) [eap] = updated
(2) [files] = noop
rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 83 seconds
rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 83 seconds
rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 82 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 82 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 81 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare"
rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Reserved connection (5)
(2) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(2) ldap: --> (uid=<SNIP>)
(2) ldap: Performing search in "dc=<SNIP>,dc=<SNIP>" with filter "(uid=<SNIP>)", scope "sub"
(2) ldap: Waiting for search result...
(2) ldap: User object found at DN "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>"
(2) ldap: Processing user attributes
(2) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (5)
Need 2 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(2) [ldap] = ok
(2) if ((ok || updated) && User-Password) {
(2) if ((ok || updated) && User-Password) -> FALSE
(2) [expiration] = noop
(2) [logintime] = noop
(2) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(2) pap: WARNING: Authentication will fail unless a "known good" password is available
(2) [pap] = noop
(2) } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(2) eap: Finished EAP session with state 0xb4480576b41e01d8
(2) eap: Previous EAP request found for state 0xb4480576b41e01d8, released from the list
(2) eap: Peer sent packet with method EAP NAK (3)
(2) eap: Found mutually acceptable type PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Initiating new EAP-TLS session
(2) eap_peap: [eaptls start] = request
(2) eap: Sending EAP Request (code 1) ID 87 length 6
(2) eap: EAP session adding &reply:State = 0xb4480576b51f1cd8
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 177 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(2) EAP-Message = 0x015700061920
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xb4480576b51f1cd80cc3e0539387be27
(2) Finished request
Waking up in 3.6 seconds.
(3) Received Access-Request Id 169 from 192.000.000.20:41064 to 192.000.000.111:1812 length 488
(3) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(3) Acct-Session-Id = "60090550-00004314"
(3) NAS-Port = 13524
(3) NAS-Port-Type = Wireless-802.11
(3) NAS-Identifier = "SSO Wireless"
(3) NAS-IP-Address = 192.000.000.100
(3) Framed-MTU = 1496
(3) User-Name = "<SNIP>"
(3) Calling-Station-Id = "24-F6-77-12-29-F8"
(3) Called-Station-Id = "D8-9D-67-4E-87-C6"
(3) Service-Type = Framed-User
(3) EAP-Message = 0x025700a119800000009716030100920100008e03035c82a98fd5e0d9efce87f211f2781942e54aaf28f51f9c27ff16aaccdca2135c00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00
(3) State = 0xb4480576b51f1cd80cc3e0539387be27
(3) Colubris-AVPair = "ssid=Weefee"
(3) Colubris-AVPair = "incoming-vlan-id=10"
(3) Colubris-AVPair = "group=<SNIP>"
(3) Colubris-AVPair = "phytype=IEEE802dot11n"
(3) Attr-26.8744.250 = 0x00000001
(3) Attr-26.8744.249 = 0x0a0b6f51
(3) Message-Authenticator = 0x617d7260ab7b8aba977374210491ff2b
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 87 length 161
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(3) eap: Finished EAP session with state 0xb4480576b51f1cd8
(3) eap: Previous EAP request found for state 0xb4480576b51f1cd8, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer indicated complete TLS record size will be 151 bytes
(3) eap_peap: Got complete TLS record (151 bytes)
(3) eap_peap: [eaptls verify] = length included
(3) eap_peap: (other): before SSL initialization
(3) eap_peap: TLS_accept: before SSL initialization
(3) eap_peap: TLS_accept: before SSL initialization
(3) eap_peap: <<< recv TLS 1.2 [length 0092]
(3) eap_peap: TLS_accept: SSLv3/TLS read client hello
(3) eap_peap: >>> send TLS 1.2 [length 003d]
(3) eap_peap: TLS_accept: SSLv3/TLS write server hello
(3) eap_peap: >>> send TLS 1.2 [length 0836]
(3) eap_peap: TLS_accept: SSLv3/TLS write certificate
(3) eap_peap: >>> send TLS 1.2 [length 014d]
(3) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(3) eap_peap: >>> send TLS 1.2 [length 0004]
(3) eap_peap: TLS_accept: SSLv3/TLS write server done
(3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(3) eap_peap: In SSL Handshake Phase
(3) eap_peap: In SSL Accept mode
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 88 length 1004
(3) eap: EAP session adding &reply:State = 0xb4480576b6101cd8
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 169 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(3) EAP-Message = 0x015803ec19c0000009d8160303003d020000390303ece57312f221e5f231376353df3675ab80765f77654d66a518b9ff67627ea87100c030000011ff01000100000b0004030001020017000016030308360b00083200082f0003a33082039f30820287a003020102020101300d06092a864886f70d0101
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xb4480576b6101cd80cc3e0539387be27
(3) Finished request
Waking up in 3.6 seconds.
(4) Received Access-Request Id 7 from 192.000.000.20:41064 to 192.000.000.111:1812 length 333
(4) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(4) Acct-Session-Id = "60090550-00004314"
(4) NAS-Port = 13524
(4) NAS-Port-Type = Wireless-802.11
(4) NAS-Identifier = "SSO Wireless"
(4) NAS-IP-Address = 192.000.000.100
(4) Framed-MTU = 1496
(4) User-Name = "<SNIP>"
(4) Calling-Station-Id = "24-F6-77-12-29-F8"
(4) Called-Station-Id = "D8-9D-67-4E-87-C6"
(4) Service-Type = Framed-User
(4) EAP-Message = 0x025800061900
(4) State = 0xb4480576b6101cd80cc3e0539387be27
(4) Colubris-AVPair = "ssid=Weefee"
(4) Colubris-AVPair = "incoming-vlan-id=10"
(4) Colubris-AVPair = "group=<SNIP>"
(4) Colubris-AVPair = "phytype=IEEE802dot11n"
(4) Attr-26.8744.250 = 0x00000001
(4) Attr-26.8744.249 = 0x0a0b6f51
(4) Message-Authenticator = 0xbd313aac261c40de74bcd8bec5ca2f90
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 88 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(4) eap: Finished EAP session with state 0xb4480576b6101cd8
(4) eap: Previous EAP request found for state 0xb4480576b6101cd8, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 89 length 1000
(4) eap: EAP session adding &reply:State = 0xb4480576b7111cd8
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 7 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(4) EAP-Message = 0x015903e81940862485855a324333242108341281d922a03f000486308204823082036aa003020102020900d69fb1aac1610490300d06092a864886f70d01010b05003074310b3009060355040613024652310f300d06035504080c065261646975733112301006035504070c09536f6d65776865726531
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xb4480576b7111cd80cc3e0539387be27
(4) Finished request
Waking up in 3.6 seconds.
(5) Received Access-Request Id 174 from 192.000.000.20:41064 to 192.000.000.111:1812 length 333
(5) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(5) Acct-Session-Id = "60090550-00004314"
(5) NAS-Port = 13524
(5) NAS-Port-Type = Wireless-802.11
(5) NAS-Identifier = "SSO Wireless"
(5) NAS-IP-Address = 192.000.000.100
(5) Framed-MTU = 1496
(5) User-Name = "<SNIP>"
(5) Calling-Station-Id = "24-F6-77-12-29-F8"
(5) Called-Station-Id = "D8-9D-67-4E-87-C6"
(5) Service-Type = Framed-User
(5) EAP-Message = 0x025900061900
(5) State = 0xb4480576b7111cd80cc3e0539387be27
(5) Colubris-AVPair = "ssid=Weefee"
(5) Colubris-AVPair = "incoming-vlan-id=10"
(5) Colubris-AVPair = "group=<SNIP>"
(5) Colubris-AVPair = "phytype=IEEE802dot11n"
(5) Attr-26.8744.250 = 0x00000001
(5) Attr-26.8744.249 = 0x0a0b6f51
(5) Message-Authenticator = 0x109c2ecb1b52d243795fe2fb2d9c9ca5
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 89 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(5) eap: Finished EAP session with state 0xb4480576b7111cd8
(5) eap: Previous EAP request found for state 0xb4480576b7111cd8, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment
(5) eap_peap: [eaptls verify] = request
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 90 length 538
(5) eap: EAP session adding &reply:State = 0xb4480576b0121cd8
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 174 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(5) EAP-Message = 0x015a021a1900bc758a293755c9377b75cd7effbab806577281491f89078215beece00682cfda8731b8869d89283ec5f2a1df48169104a277a9be7803aa8fb26a2d479c04ff8f54ab234b55803f8d272f4b013e91b32f711fd4f226eece6c01508ec36c7f11c668e0cbd3511d66e02af0bb2875da3ca275
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xb4480576b0121cd80cc3e0539387be27
(5) Finished request
Waking up in 3.6 seconds.
(6) Received Access-Request Id 181 from 192.000.000.20:41064 to 192.000.000.111:1812 length 463
(6) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(6) Acct-Session-Id = "60090550-00004314"
(6) NAS-Port = 13524
(6) NAS-Port-Type = Wireless-802.11
(6) NAS-Identifier = "SSO Wireless"
(6) NAS-IP-Address = 192.000.000.100
(6) Framed-MTU = 1496
(6) User-Name = "<SNIP>"
(6) Calling-Station-Id = "24-F6-77-12-29-F8"
(6) Called-Station-Id = "D8-9D-67-4E-87-C6"
(6) Service-Type = Framed-User
(6) EAP-Message = 0x025a008819800000007e16030300461000004241043bb9798cd40d501eddf67bb865c0a485cc4e0abe0001bca516815ff212260844a764f6756490f573069d36aa9d318b447e565e7ecf7b4edfe4ecbcaab6bcd42a140303000101160303002897750e66478c41ff34904db6c3fe3051741bccdfa99407
(6) State = 0xb4480576b0121cd80cc3e0539387be27
(6) Colubris-AVPair = "ssid=Weefee"
(6) Colubris-AVPair = "incoming-vlan-id=10"
(6) Colubris-AVPair = "group=<SNIP>"
(6) Colubris-AVPair = "phytype=IEEE802dot11n"
(6) Attr-26.8744.250 = 0x00000001
(6) Attr-26.8744.249 = 0x0a0b6f51
(6) Message-Authenticator = 0xd1fbdc3253b6f7d37d32bafac968d24f
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 90 length 136
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(6) eap: Finished EAP session with state 0xb4480576b0121cd8
(6) eap: Previous EAP request found for state 0xb4480576b0121cd8, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(6) eap_peap: Got complete TLS record (126 bytes)
(6) eap_peap: [eaptls verify] = length included
(6) eap_peap: TLS_accept: SSLv3/TLS write server done
(6) eap_peap: <<< recv TLS 1.2 [length 0046]
(6) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(6) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(6) eap_peap: <<< recv TLS 1.2 [length 0010]
(6) eap_peap: TLS_accept: SSLv3/TLS read finished
(6) eap_peap: >>> send TLS 1.2 [length 0001]
(6) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(6) eap_peap: >>> send TLS 1.2 [length 0010]
(6) eap_peap: TLS_accept: SSLv3/TLS write finished
(6) eap_peap: (other): SSL negotiation finished successfully
(6) eap_peap: SSL Connection Established
(6) eap_peap: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 91 length 57
(6) eap: EAP session adding &reply:State = 0xb4480576b1131cd8
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 181 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(6) EAP-Message = 0x015b003919001403030001011603030028a7de33d9302de8fc0e2ec59ec4ec6b3a49ef972d3f79b8ba4f5390010058036131dc22b2c68ad319
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xb4480576b1131cd80cc3e0539387be27
(6) Finished request
Waking up in 3.6 seconds.
(7) Received Access-Request Id 210 from 192.000.000.20:41064 to 192.000.000.111:1812 length 333
(7) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(7) Acct-Session-Id = "60090550-00004314"
(7) NAS-Port = 13524
(7) NAS-Port-Type = Wireless-802.11
(7) NAS-Identifier = "SSO Wireless"
(7) NAS-IP-Address = 192.000.000.100
(7) Framed-MTU = 1496
(7) User-Name = "<SNIP>"
(7) Calling-Station-Id = "24-F6-77-12-29-F8"
(7) Called-Station-Id = "D8-9D-67-4E-87-C6"
(7) Service-Type = Framed-User
(7) EAP-Message = 0x025b00061900
(7) State = 0xb4480576b1131cd80cc3e0539387be27
(7) Colubris-AVPair = "ssid=Weefee"
(7) Colubris-AVPair = "incoming-vlan-id=10"
(7) Colubris-AVPair = "group=<SNIP>"
(7) Colubris-AVPair = "phytype=IEEE802dot11n"
(7) Attr-26.8744.250 = 0x00000001
(7) Attr-26.8744.249 = 0x0a0b6f51
(7) Message-Authenticator = 0x363f4e9c9ee5c035f4c5cf132614971f
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 91 length 6
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(7) eap: Finished EAP session with state 0xb4480576b1131cd8
(7) eap: Previous EAP request found for state 0xb4480576b1131cd8, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(7) eap_peap: [eaptls verify] = success
(7) eap_peap: [eaptls process] = success
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state TUNNEL ESTABLISHED
(7) eap: Sending EAP Request (code 1) ID 92 length 40
(7) eap: EAP session adding &reply:State = 0xb4480576b2141cd8
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 210 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(7) EAP-Message = 0x015c00281900170303001da7de33d9302de8fd86b1f383c9b21bfd26d311ebc4d1c860876f3a058b
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xb4480576b2141cd80cc3e0539387be27
(7) Finished request
Waking up in 3.6 seconds.
(8) Received Access-Request Id 48 from 192.000.000.20:41064 to 192.000.000.111:1812 length 369
(8) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(8) Acct-Session-Id = "60090550-00004314"
(8) NAS-Port = 13524
(8) NAS-Port-Type = Wireless-802.11
(8) NAS-Identifier = "SSO Wireless"
(8) NAS-IP-Address = 192.000.000.100
(8) Framed-MTU = 1496
(8) User-Name = "<SNIP>"
(8) Calling-Station-Id = "24-F6-77-12-29-F8"
(8) Called-Station-Id = "D8-9D-67-4E-87-C6"
(8) Service-Type = Framed-User
(8) EAP-Message = 0x025c002a1900170303001f97750e66478c4200ae32484d3aa2490fee167338c47b57e108a3238acac426
(8) State = 0xb4480576b2141cd80cc3e0539387be27
(8) Colubris-AVPair = "ssid=Weefee"
(8) Colubris-AVPair = "incoming-vlan-id=10"
(8) Colubris-AVPair = "group=<SNIP>"
(8) Colubris-AVPair = "phytype=IEEE802dot11n"
(8) Attr-26.8744.250 = 0x00000001
(8) Attr-26.8744.249 = 0x0a0b6f51
(8) Message-Authenticator = 0xc2090a7de76087ab62a11ea135cffbc4
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 92 length 42
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(8) eap: Finished EAP session with state 0xb4480576b2141cd8
(8) eap: Previous EAP request found for state 0xb4480576b2141cd8, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(8) eap_peap: Identity - <SNIP>
(8) eap_peap: Got inner identity '<SNIP>'
(8) eap_peap: Setting default EAP type for tunneled EAP session
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x025c000b016e74726f6e65
(8) eap_peap: Setting User-Name to <SNIP>
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x025c000b016e74726f6e65
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "<SNIP>"
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x025c000b016e74726f6e65
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "<SNIP>"
(8) WARNING: Outer and inner identities are the same. User privacy is compromised.
(8) server inner-tunnel {
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [chap] = noop
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) &Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 92 length 11
(8) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(8) authenticate {
(8) eap: Peer sent packet with method EAP Identity (1)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: Issuing Challenge
(8) eap: Sending EAP Request (code 1) ID 93 length 43
(8) eap: EAP session adding &reply:State = 0x2f5237742f0f2ddd
(8) [eap] = handled
(8) } # authenticate = handled
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) EAP-Message = 0x015d002b1a015d00261047c029917ade84279c1cd6fbc28e7c43667265657261646975732d332e302e3136
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x2f5237742f0f2ddd92ea258de54332ca
(8) eap_peap: Got tunneled reply code 11
(8) eap_peap: EAP-Message = 0x015d002b1a015d00261047c029917ade84279c1cd6fbc28e7c43667265657261646975732d332e302e3136
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: State = 0x2f5237742f0f2ddd92ea258de54332ca
(8) eap_peap: Got tunneled reply RADIUS code 11
(8) eap_peap: EAP-Message = 0x015d002b1a015d00261047c029917ade84279c1cd6fbc28e7c43667265657261646975732d332e302e3136
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: State = 0x2f5237742f0f2ddd92ea258de54332ca
(8) eap_peap: Got tunneled Access-Challenge
(8) eap: Sending EAP Request (code 1) ID 93 length 74
(8) eap: EAP session adding &reply:State = 0xb4480576b3151cd8
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) Challenge { ... } # empty sub-section is ignored
(8) Sent Access-Challenge Id 48 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(8) EAP-Message = 0x015d004a1900170303003fa7de33d9302de8feb01359c02940d66ce006fce78b883b1b7f71047bd1aa6dcecb8820c7c29f116b714f32bc3acc4415d5bb17545954f80f7744adad58474d
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xb4480576b3151cd80cc3e0539387be27
(8) Finished request
Waking up in 3.5 seconds.
(9) Received Access-Request Id 215 from 192.000.000.20:41064 to 192.000.000.111:1812 length 423
(9) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(9) Acct-Session-Id = "60090550-00004314"
(9) NAS-Port = 13524
(9) NAS-Port-Type = Wireless-802.11
(9) NAS-Identifier = "SSO Wireless"
(9) NAS-IP-Address = 192.000.000.100
(9) Framed-MTU = 1496
(9) User-Name = "<SNIP>"
(9) Calling-Station-Id = "24-F6-77-12-29-F8"
(9) Called-Station-Id = "D8-9D-67-4E-87-C6"
(9) Service-Type = Framed-User
(9) EAP-Message = 0x025d00601900170303005597750e66478c4201113e9cfbe1dd8f763122f652ccaadbe33305d7271586b173a274a167e0e69a7541b82f6c79c65b1ca2482275f3f17804bcdff6944d46f986199db62d994a1fbc62feb53dfd62aaf4843cab087b
(9) State = 0xb4480576b3151cd80cc3e0539387be27
(9) Colubris-AVPair = "ssid=Weefee"
(9) Colubris-AVPair = "incoming-vlan-id=10"
(9) Colubris-AVPair = "group=<SNIP>"
(9) Colubris-AVPair = "phytype=IEEE802dot11n"
(9) Attr-26.8744.250 = 0x00000001
(9) Attr-26.8744.249 = 0x0a0b6f51
(9) Message-Authenticator = 0xadc59061e12fda83a2b8eacf982998cc
(9) session-state: No cached attributes
(9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 93 length 96
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(9) eap: Finished EAP session with state 0xb4480576b3151cd8
(9) eap: Previous EAP request found for state 0xb4480576b3151cd8, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state phase2
(9) eap_peap: EAP method MSCHAPv2 (26)
(9) eap_peap: Got tunneled request
(9) eap_peap: EAP-Message = 0x025d00411a025d003c31a4abffc9b6efa4452f25ee14688ef3450000000000000000fcd20fa844cb8b64bb8450cfa108022fb5fc7ae61c9f5ec8006e74726f6e65
(9) eap_peap: Setting User-Name to <SNIP>
(9) eap_peap: Sending tunneled request to inner-tunnel
(9) eap_peap: EAP-Message = 0x025d00411a025d003c31a4abffc9b6efa4452f25ee14688ef3450000000000000000fcd20fa844cb8b64bb8450cfa108022fb5fc7ae61c9f5ec8006e74726f6e65
(9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(9) eap_peap: User-Name = "<SNIP>"
(9) eap_peap: State = 0x2f5237742f0f2ddd92ea258de54332ca
(9) Virtual server inner-tunnel received request
(9) EAP-Message = 0x025d00411a025d003c31a4abffc9b6efa4452f25ee14688ef3450000000000000000fcd20fa844cb8b64bb8450cfa108022fb5fc7ae61c9f5ec8006e74726f6e65
(9) FreeRADIUS-Proxied-To = 127.0.0.1
(9) User-Name = "<SNIP>"
(9) State = 0x2f5237742f0f2ddd92ea258de54332ca
(9) WARNING: Outer and inner identities are the same. User privacy is compromised.
(9) server inner-tunnel {
(9) session-state: No cached attributes
(9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [chap] = noop
(9) [mschap] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) update control {
(9) &Proxy-To-Realm := LOCAL
(9) } # update control = noop
(9) eap: Peer sent EAP Response (code 2) ID 93 length 65
(9) eap: No EAP Start, assuming it's an on-going EAP conversation
(9) [eap] = updated
(9) [files] = noop
rlm_ldap (ldap): Reserved connection (5)
(9) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(9) ldap: --> (uid=<SNIP>)
(9) ldap: Performing search in "dc=<SNIP>,dc=<SNIP>" with filter "(uid=<SNIP>)", scope "sub"
(9) ldap: Waiting for search result...
(9) ldap: User object found at DN "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>"
(9) ldap: Processing user attributes
(9) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(9) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (5)
Need 1 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (7), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(9) [ldap] = ok
(9) [expiration] = noop
(9) [logintime] = noop
(9) [pap] = noop
(9) } # authorize = updated
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(9) authenticate {
(9) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(9) eap: Finished EAP session with state 0x2f5237742f0f2ddd
(9) eap: Previous EAP request found for state 0x2f5237742f0f2ddd, released from the list
(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(9) eap: Calling submodule eap_mschapv2 to process data
(9) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(9) eap_mschapv2: authenticate {
(9) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password
(9) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password
(9) mschap: Creating challenge hash with username: <SNIP>
(9) mschap: Client is using MS-CHAPv2
(9) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication
(9) mschap: ERROR: MS-CHAP2-Response is incorrect
(9) [mschap] = reject
(9) } # authenticate = reject
(9) eap: Sending EAP Failure (code 4) ID 93 length 4
(9) eap: Freeing handler
(9) [eap] = reject
(9) } # authenticate = reject
(9) Failed to authenticate the user
(9) Using Post-Auth-Type Reject
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(9) Post-Auth-Type REJECT {
(9) attr_filter.access_reject: EXPAND %{User-Name}
(9) attr_filter.access_reject: --> <SNIP>
(9) attr_filter.access_reject: Matched entry DEFAULT at line 11
(9) [attr_filter.access_reject] = updated
(9) update outer.session-state {
(9) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: FAILED: No NT/LM-Password. Cannot perform authentication'
(9) } # update outer.session-state = noop
(9) } # Post-Auth-Type REJECT = updated
(9) } # server inner-tunnel
(9) Virtual server sending reply
(9) MS-CHAP-Error = "]E=691 R=1 C=99f5970e0fc8f1f325433c9f995d2763 V=3 M=Authentication rejected"
(9) EAP-Message = 0x045d0004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: Got tunneled reply code 3
(9) eap_peap: MS-CHAP-Error = "]E=691 R=1 C=99f5970e0fc8f1f325433c9f995d2763 V=3 M=Authentication rejected"
(9) eap_peap: EAP-Message = 0x045d0004
(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: Got tunneled reply RADIUS code 3
(9) eap_peap: MS-CHAP-Error = "]E=691 R=1 C=99f5970e0fc8f1f325433c9f995d2763 V=3 M=Authentication rejected"
(9) eap_peap: EAP-Message = 0x045d0004
(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(9) eap_peap: Tunneled authentication was rejected
(9) eap_peap: FAILURE
(9) eap: Sending EAP Request (code 1) ID 94 length 46
(9) eap: EAP session adding &reply:State = 0xb4480576bc161cd8
(9) [eap] = handled
(9) } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9) Challenge { ... } # empty sub-section is ignored
(9) session-state: Saving cached attributes
(9) Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication"
(9) Sent Access-Challenge Id 215 from 192.000.000.111:1812 to 192.000.000.20:41064 length 0
(9) EAP-Message = 0x015e002e19001703030023a7de33d9302de8ffc42b0e26a9c87b36ad400d427f31d4a2ea01b4fb265802637898b5
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) State = 0xb4480576bc161cd80cc3e0539387be27
(9) Finished request
Waking up in 3.0 seconds.
(10) Received Access-Request Id 232 from 192.000.000.20:41064 to 192.000.000.111:1812 length 373
(10) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-24-F6-77-12-29-F8-5C-82-A9-8D-00-0B-E2-77"
(10) Acct-Session-Id = "60090550-00004314"
(10) NAS-Port = 13524
(10) NAS-Port-Type = Wireless-802.11
(10) NAS-Identifier = "SSO Wireless"
(10) NAS-IP-Address = 192.000.000.100
(10) Framed-MTU = 1496
(10) User-Name = "<SNIP>"
(10) Calling-Station-Id = "24-F6-77-12-29-F8"
(10) Called-Station-Id = "D8-9D-67-4E-87-C6"
(10) Service-Type = Framed-User
(10) EAP-Message = 0x025e002e1900170303002397750e66478c4202133152404312227f5383b97f966c492ad52f54f56198ef97d3e141
(10) State = 0xb4480576bc161cd80cc3e0539387be27
(10) Colubris-AVPair = "ssid=Weefee"
(10) Colubris-AVPair = "incoming-vlan-id=10"
(10) Colubris-AVPair = "group=<SNIP>"
(10) Colubris-AVPair = "phytype=IEEE802dot11n"
(10) Attr-26.8744.250 = 0x00000001
(10) Attr-26.8744.249 = 0x0a0b6f51
(10) Message-Authenticator = 0xf09c4fb0e08d1697ed6cb799dfe9b5d9
(10) Restoring &session-state
(10) &session-state:Module-Failure-Message := "mschap: FAILED: No NT/LM-Password. Cannot perform authentication"
(10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(10) authorize {
(10) policy filter_username {
(10) if (&User-Name) {
(10) if (&User-Name) -> TRUE
(10) if (&User-Name) {
(10) if (&User-Name =~ / /) {
(10) if (&User-Name =~ / /) -> FALSE
(10) if (&User-Name =~ /@[^@]*@/ ) {
(10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(10) if (&User-Name =~ /\.\./ ) {
(10) if (&User-Name =~ /\.\./ ) -> FALSE
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(10) if (&User-Name =~ /\.$/) {
(10) if (&User-Name =~ /\.$/) -> FALSE
(10) if (&User-Name =~ /@\./) {
(10) if (&User-Name =~ /@\./) -> FALSE
(10) } # if (&User-Name) = notfound
(10) } # policy filter_username = notfound
(10) [preprocess] = ok
(10) [chap] = noop
(10) [mschap] = noop
(10) [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 94 length 46
(10) eap: Continuing tunnel setup
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(10) authenticate {
(10) eap: Expiring EAP session with state 0x5be9f6fb5bbaf2fa
(10) eap: Finished EAP session with state 0xb4480576bc161cd8
(10) eap: Previous EAP request found for state 0xb4480576bc161cd8, released from the list
(10) eap: Peer sent packet with method EAP PEAP (25)
(10) eap: Calling submodule eap_peap to process data
(10) eap_peap: Continuing EAP-TLS
(10) eap_peap: [eaptls verify] = ok
(10) eap_peap: Done initial handshake
(10) eap_peap: [eaptls process] = ok
(10) eap_peap: Session established. Decoding tunneled attributes
(10) eap_peap: PEAP state send tlv failure
(10) eap_peap: Received EAP-TLV response
(10) eap_peap: ERROR: The users session was previously rejected: returning reject (again.)
(10) eap_peap: This means you need to read the PREVIOUS messages in the debug output
(10) eap_peap: to find out the reason why the user was rejected
(10) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
(10) eap_peap: what went wrong, and how to fix the problem
(10) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
(10) eap: Sending EAP Failure (code 4) ID 94 length 4
(10) eap: Failed in EAP select
(10) [eap] = invalid
(10) } # authenticate = invalid
(10) Failed to authenticate the user
(10) Using Post-Auth-Type Reject
(10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(10) Post-Auth-Type REJECT {
(10) attr_filter.access_reject: EXPAND %{User-Name}
(10) attr_filter.access_reject: --> <SNIP>
(10) attr_filter.access_reject: Matched entry DEFAULT at line 11
(10) [attr_filter.access_reject] = updated
(10) [eap] = noop
(10) policy remove_reply_message_if_eap {
(10) if (&reply:EAP-Message && &reply:Reply-Message) {
(10) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(10) else {
(10) [noop] = noop
(10) } # else = noop
(10) } # policy remove_reply_message_if_eap = noop
(10) } # Post-Auth-Type REJECT = updated
(10) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(10) Sending delayed response
(10) Sent Access-Reject Id 232 from 192.000.000.111:1812 to 192.000.000.20:41064 length 44
(10) EAP-Message = 0x045e0004
(10) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 1.9 seconds.
(1) Cleaning up request packet ID 67 with timestamp +81
Waking up in 1.3 seconds.
(2) Cleaning up request packet ID 177 with timestamp +81
(3) Cleaning up request packet ID 169 with timestamp +83
(4) Cleaning up request packet ID 7 with timestamp +83
(5) Cleaning up request packet ID 174 with timestamp +83
(6) Cleaning up request packet ID 181 with timestamp +83
(7) Cleaning up request packet ID 210 with timestamp +83
(8) Cleaning up request packet ID 48 with timestamp +83
Waking up in 0.5 seconds.
(9) Cleaning up request packet ID 215 with timestamp +83
(10) Cleaning up request packet ID 232 with timestamp +83
Ready to process requests
More information about the Freeradius-Users
mailing list