Working With EAP-TTLS, and LDAP
Nate .
nate2077developer at gmail.com
Fri Mar 22 19:12:09 CET 2019
I thought I had attached them, I'm sorry... I'm running through the test
again, and this time I'll make it super clearer which tests are which too.
Please don't yell at me, I'm doing my best and it's an extremely stressful
time for me. And please understand, I appreciate your help with everything.
I've double checked. I have attached the startup part of the logs, and
separated the two tests. The freeradius_radtest is using the following
command:
freeradius:~$ radtest -t pap ldap_user ldap_pass 127.0.0.1 0 testing123
Sent Access-Request Id 10 from 0.0.0.0:53177 to 127.0.0.1:1812 length 76
User-Name = "ldap_user"
User-Password = "ldap_pass"
NAS-IP-Address = 192.168.16.111
NAS-Port = 0
Message-Authenticator = 0x00
Cleartext-Password = "ldap_pass"
Received Access-Accept Id 10 from 127.0.0.1:1812 to 0.0.0.0:0 length 20
So I can see here that the LDAP Module is functioning properly.
On Thu, Mar 21, 2019 at 2:35 PM Alan DeKok <aland at deployingradius.com>
wrote:
> On Mar 21, 2019, at 10:57 AM, Nate . <nate2077developer at gmail.com> wrote:
> >
> > I have been dealing a few things, so this got delayed, apologies. I am
> > still unclear on why I am unable to connect via the EAPTTLS-PAP. I have
> > reviewed the log many times and I don't really understand it.
>
> Then post it here as suggested in the "man" pages, web pages, and in the
> email you get when you join the list.
>
> How do you expect us to help you when you give us zero information?
>
> > I noticed a
> > part of the authentication where it tries the LDAP, binds, and then
> theres
> > a part where it says "if ((ok || updated) && User-Password) -> FALSE"
> > where it is true on the radtest.
>
> English descriptions are bad. Post the debug output. It will be much,
> much, faster to solve the problem.
>
> > I'm felt certain it's the User-Password
> > missing or something, but I don't understand why it would be missing. I
> > noticed the "(0) User-Password = " does not appear at the top of the
> > connection log like the radtest either. Though, on the "Flat file user
> > credentials" from my previous email, you can see it is also not listed at
> > the top, so maybe it's not that.
>
> <sigh> Vague descriptions of problems are an utter waste of everyones
> time.
>
> Post the debug log. Read the documentation. I've been saying this for
> 20 years, and it is getting tiring.
>
> Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-------------- next part --------------
(0) Received Access-Request Id 10 from 127.0.0.1:53177 to 127.0.0.1:1812 length 76
(0) User-Name = "<SNIP>"
(0) User-Password = "<SNIP>"
(0) NAS-IP-Address = 192.168.16.111
(0) NAS-Port = 0
(0) Message-Authenticator = 0xe66582a3fc25ee072003b80140eda760
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [files] = noop
rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 339 seconds
rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 339 seconds
rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 338 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 338 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 337 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare"
rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Reserved connection (5)
(0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap: --> (uid=<SNIP>)
(0) ldap: Performing search in "dc=<SNIP>,dc=<SNIP>" with filter "(uid=<SNIP>)", scope "sub"
(0) ldap: Waiting for search result...
(0) ldap: User object found at DN "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>"
(0) ldap: Processing user attributes
(0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (5)
Need 2 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) if ((ok || updated) && User-Password) {
(0) if ((ok || updated) && User-Password) -> TRUE
(0) if ((ok || updated) && User-Password) {
(0) update {
(0) control:Auth-Type := LDAP
(0) } # update = noop
(0) } # if ((ok || updated) && User-Password) = noop
(0) [expiration] = noop
(0) [logintime] = noop
(0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password is available
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = LDAP
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Auth-Type LDAP {
rlm_ldap (ldap): Reserved connection (5)
(0) ldap: Login attempt by "<SNIP>"
(0) ldap: Using user DN from request "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>"
(0) ldap: Waiting for bind result...
(0) ldap: Bind successful
(0) ldap: Bind as user "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>" was successful
rlm_ldap (ldap): Released connection (5)
Need 1 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (7), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) } # Auth-Type LDAP = ok
(0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(0) post-auth {
(0) update {
(0) No attributes updated
(0) } # update = noop
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # post-auth = noop
(0) Sent Access-Accept Id 10 from 127.0.0.1:1812 to 127.0.0.1:53177 length 0
(0) Finished request
Waking up in 4.9 seconds.
-------------- next part --------------
(1) Received Access-Request Id 119 from 192.168.17.20:41064 to 192.168.16.111:1812 length 320
(1) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(1) Acct-Session-Id = "ee3ffee4-000054cb"
(1) NAS-Port = 17276
(1) NAS-Port-Type = Wireless-802.11
(1) NAS-Identifier = "SSO Wireless"
(1) NAS-IP-Address = 192.168.17.100
(1) Framed-MTU = 1496
(1) User-Name = "<SNIP>"
(1) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(1) Called-Station-Id = "D8-9D-67-4E-87-C6"
(1) Service-Type = Framed-User
(1) EAP-Message = 0x0280000b016e74726f6e65
(1) Colubris-AVPair = "ssid=Weefee"
(1) Colubris-AVPair = "incoming-vlan-id=10"
(1) Colubris-AVPair = "group=<SNIP>"
(1) Colubris-AVPair = "phytype=IEEE802dot11n"
(1) Attr-26.8744.250 = 0x00000001
(1) Attr-26.8744.249 = 0x0a0b6f51
(1) Message-Authenticator = 0x8b5772d01566963b72b17fcb965cff2c
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 128 length 11
(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Peer sent packet with method EAP Identity (1)
(1) eap: Calling submodule eap_md5 to process data
(1) eap_md5: Issuing MD5 Challenge
(1) eap: Sending EAP Request (code 1) ID 129 length 22
(1) eap: EAP session adding &reply:State = 0x72a278e872237c3d
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 119 from 192.168.16.111:1812 to 192.168.17.20:41064 length 0
(1) EAP-Message = 0x018100160410820ecc5f6973abd1ce25641db0c0283c
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x72a278e872237c3d1ffaa038e8b9e01d
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 18 from 192.168.17.20:41064 to 192.168.16.111:1812 length 333
(2) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(2) Acct-Session-Id = "ee3ffee4-000054cb"
(2) NAS-Port = 17276
(2) NAS-Port-Type = Wireless-802.11
(2) NAS-Identifier = "SSO Wireless"
(2) NAS-IP-Address = 192.168.17.100
(2) Framed-MTU = 1496
(2) User-Name = "<SNIP>"
(2) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(2) Called-Station-Id = "D8-9D-67-4E-87-C6"
(2) Service-Type = Framed-User
(2) EAP-Message = 0x028100060315
(2) State = 0x72a278e872237c3d1ffaa038e8b9e01d
(2) Colubris-AVPair = "ssid=Weefee"
(2) Colubris-AVPair = "incoming-vlan-id=10"
(2) Colubris-AVPair = "group=<SNIP>"
(2) Colubris-AVPair = "phytype=IEEE802dot11n"
(2) Attr-26.8744.250 = 0x00000001
(2) Attr-26.8744.249 = 0x0a0b6f51
(2) Message-Authenticator = 0x80bc5798f8c41f1a0da53e96ba944ca4
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 129 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2) [eap] = updated
(2) [files] = noop
rlm_ldap (ldap): Closing connection (6): Hit idle_timeout, was idle for 587 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (5): Hit idle_timeout, was idle for 586 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (7): Hit idle_timeout, was idle for 585 seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase "spare"
rlm_ldap (ldap): Opening additional connection (8), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Reserved connection (8)
(2) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(2) ldap: --> (uid=<SNIP>)
(2) ldap: Performing search in "dc=<SNIP>,dc=<SNIP>" with filter "(uid=<SNIP>)", scope "sub"
(2) ldap: Waiting for search result...
(2) ldap: User object found at DN "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>"
(2) ldap: Processing user attributes
(2) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(2) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (8)
Need 2 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (9), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(2) [ldap] = ok
(2) if ((ok || updated) && User-Password) {
(2) if ((ok || updated) && User-Password) -> FALSE
(2) [expiration] = noop
(2) [logintime] = noop
(2) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type
(2) pap: WARNING: Authentication will fail unless a "known good" password is available
(2) [pap] = noop
(2) } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x72a278e872237c3d
(2) eap: Finished EAP session with state 0x72a278e872237c3d
(2) eap: Previous EAP request found for state 0x72a278e872237c3d, released from the list
(2) eap: Peer sent packet with method EAP NAK (3)
(2) eap: Found mutually acceptable type TTLS (21)
(2) eap: Calling submodule eap_ttls to process data
(2) eap_ttls: Initiating new EAP-TLS session
(2) eap_ttls: [eaptls start] = request
(2) eap: Sending EAP Request (code 1) ID 130 length 6
(2) eap: EAP session adding &reply:State = 0x72a278e873206d3d
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 18 from 192.168.16.111:1812 to 192.168.17.20:41064 length 0
(2) EAP-Message = 0x018200061520
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x72a278e873206d3d1ffaa038e8b9e01d
(2) Finished request
Waking up in 3.7 seconds.
(3) Received Access-Request Id 51 from 192.168.17.20:41064 to 192.168.16.111:1812 length 498
(3) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(3) Acct-Session-Id = "ee3ffee4-000054cb"
(3) NAS-Port = 17276
(3) NAS-Port-Type = Wireless-802.11
(3) NAS-Identifier = "SSO Wireless"
(3) NAS-IP-Address = 192.168.17.100
(3) Framed-MTU = 1496
(3) User-Name = "<SNIP>"
(3) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(3) Called-Station-Id = "D8-9D-67-4E-87-C6"
(3) Service-Type = Framed-User
(3) EAP-Message = 0x028200ab150016030100a00100009c03037f87860ec543e77362f2da8c38e7036f000a3b966289a49fd900c0b92bdc1a5200003ec02cc030009fc02bc02f009ecca9cca8c00ac024c014c0280039006bc009c023c013c02700330067c007c011009d009c0035003d002f003c00050004000a01000035ff
(3) State = 0x72a278e873206d3d1ffaa038e8b9e01d
(3) Colubris-AVPair = "ssid=Weefee"
(3) Colubris-AVPair = "incoming-vlan-id=10"
(3) Colubris-AVPair = "group=<SNIP>"
(3) Colubris-AVPair = "phytype=IEEE802dot11n"
(3) Attr-26.8744.250 = 0x00000001
(3) Attr-26.8744.249 = 0x0a0b6f51
(3) Message-Authenticator = 0x9f8108a448b008f838708553495c1c06
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 130 length 171
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x72a278e873206d3d
(3) eap: Finished EAP session with state 0x72a278e873206d3d
(3) eap: Previous EAP request found for state 0x72a278e873206d3d, released from the list
(3) eap: Peer sent packet with method EAP TTLS (21)
(3) eap: Calling submodule eap_ttls to process data
(3) eap_ttls: Authenticate
(3) eap_ttls: Continuing EAP-TLS
(3) eap_ttls: [eaptls verify] = ok
(3) eap_ttls: Done initial handshake
(3) eap_ttls: (other): before SSL initialization
(3) eap_ttls: TLS_accept: before SSL initialization
(3) eap_ttls: TLS_accept: before SSL initialization
(3) eap_ttls: <<< recv TLS 1.2 [length 00a0]
(3) eap_ttls: TLS_accept: SSLv3/TLS read client hello
(3) eap_ttls: >>> send TLS 1.2 [length 003d]
(3) eap_ttls: TLS_accept: SSLv3/TLS write server hello
(3) eap_ttls: >>> send TLS 1.2 [length 0836]
(3) eap_ttls: TLS_accept: SSLv3/TLS write certificate
(3) eap_ttls: >>> send TLS 1.2 [length 014d]
(3) eap_ttls: TLS_accept: SSLv3/TLS write key exchange
(3) eap_ttls: >>> send TLS 1.2 [length 0004]
(3) eap_ttls: TLS_accept: SSLv3/TLS write server done
(3) eap_ttls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(3) eap_ttls: In SSL Handshake Phase
(3) eap_ttls: In SSL Accept mode
(3) eap_ttls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 131 length 1004
(3) eap: EAP session adding &reply:State = 0x72a278e870216d3d
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 51 from 192.168.16.111:1812 to 192.168.17.20:41064 length 0
(3) EAP-Message = 0x018303ec15c0000009d8160303003d0200003903032e161698e648eb84595a77f9ec45fed2b0b3aa3f0b3da6c3c2f3ed4f60cda8db00c030000011ff01000100000b0004030001020017000016030308360b00083200082f0003a33082039f30820287a003020102020101300d06092a864886f70d0101
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x72a278e870216d3d1ffaa038e8b9e01d
(3) Finished request
Waking up in 3.7 seconds.
(4) Received Access-Request Id 70 from 192.168.17.20:41064 to 192.168.16.111:1812 length 333
(4) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(4) Acct-Session-Id = "ee3ffee4-000054cb"
(4) NAS-Port = 17276
(4) NAS-Port-Type = Wireless-802.11
(4) NAS-Identifier = "SSO Wireless"
(4) NAS-IP-Address = 192.168.17.100
(4) Framed-MTU = 1496
(4) User-Name = "<SNIP>"
(4) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(4) Called-Station-Id = "D8-9D-67-4E-87-C6"
(4) Service-Type = Framed-User
(4) EAP-Message = 0x028300061500
(4) State = 0x72a278e870216d3d1ffaa038e8b9e01d
(4) Colubris-AVPair = "ssid=Weefee"
(4) Colubris-AVPair = "incoming-vlan-id=10"
(4) Colubris-AVPair = "group=<SNIP>"
(4) Colubris-AVPair = "phytype=IEEE802dot11n"
(4) Attr-26.8744.250 = 0x00000001
(4) Attr-26.8744.249 = 0x0a0b6f51
(4) Message-Authenticator = 0x3a3cce991647a6aaee6fd2ca9d17501d
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 131 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x72a278e870216d3d
(4) eap: Finished EAP session with state 0x72a278e870216d3d
(4) eap: Previous EAP request found for state 0x72a278e870216d3d, released from the list
(4) eap: Peer sent packet with method EAP TTLS (21)
(4) eap: Calling submodule eap_ttls to process data
(4) eap_ttls: Authenticate
(4) eap_ttls: Continuing EAP-TLS
(4) eap_ttls: Peer ACKed our handshake fragment
(4) eap_ttls: [eaptls verify] = request
(4) eap_ttls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 132 length 1004
(4) eap: EAP session adding &reply:State = 0x72a278e871266d3d
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 70 from 192.168.16.111:1812 to 192.168.17.20:41064 length 0
(4) EAP-Message = 0x018403ec15c0000009d8862485855a324333242108341281d922a03f000486308204823082036aa003020102020900d69fb1aac1610490300d06092a864886f70d01010b05003074310b3009060355040613024652310f300d06035504080c065261646975733112301006035504070c09536f6d657768
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x72a278e871266d3d1ffaa038e8b9e01d
(4) Finished request
Waking up in 3.7 seconds.
(5) Received Access-Request Id 184 from 192.168.17.20:41064 to 192.168.16.111:1812 length 333
(5) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(5) Acct-Session-Id = "ee3ffee4-000054cb"
(5) NAS-Port = 17276
(5) NAS-Port-Type = Wireless-802.11
(5) NAS-Identifier = "SSO Wireless"
(5) NAS-IP-Address = 192.168.17.100
(5) Framed-MTU = 1496
(5) User-Name = "<SNIP>"
(5) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(5) Called-Station-Id = "D8-9D-67-4E-87-C6"
(5) Service-Type = Framed-User
(5) EAP-Message = 0x028400061500
(5) State = 0x72a278e871266d3d1ffaa038e8b9e01d
(5) Colubris-AVPair = "ssid=Weefee"
(5) Colubris-AVPair = "incoming-vlan-id=10"
(5) Colubris-AVPair = "group=<SNIP>"
(5) Colubris-AVPair = "phytype=IEEE802dot11n"
(5) Attr-26.8744.250 = 0x00000001
(5) Attr-26.8744.249 = 0x0a0b6f51
(5) Message-Authenticator = 0x3cd7961bf49a4bbf7ea78fb9b9c0f75c
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 132 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x72a278e871266d3d
(5) eap: Finished EAP session with state 0x72a278e871266d3d
(5) eap: Previous EAP request found for state 0x72a278e871266d3d, released from the list
(5) eap: Peer sent packet with method EAP TTLS (21)
(5) eap: Calling submodule eap_ttls to process data
(5) eap_ttls: Authenticate
(5) eap_ttls: Continuing EAP-TLS
(5) eap_ttls: Peer ACKed our handshake fragment
(5) eap_ttls: [eaptls verify] = request
(5) eap_ttls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 133 length 542
(5) eap: EAP session adding &reply:State = 0x72a278e876276d3d
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 184 from 192.168.16.111:1812 to 192.168.17.20:41064 length 0
(5) EAP-Message = 0x0185021e1580000009d8bc758a293755c9377b75cd7effbab806577281491f89078215beece00682cfda8731b8869d89283ec5f2a1df48169104a277a9be7803aa8fb26a2d479c04ff8f54ab234b55803f8d272f4b013e91b32f711fd4f226eece6c01508ec36c7f11c668e0cbd3511d66e02af0bb2875
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x72a278e876276d3d1ffaa038e8b9e01d
(5) Finished request
Waking up in 3.7 seconds.
(6) Received Access-Request Id 167 from 192.168.17.20:41064 to 192.168.16.111:1812 length 459
(6) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(6) Acct-Session-Id = "ee3ffee4-000054cb"
(6) NAS-Port = 17276
(6) NAS-Port-Type = Wireless-802.11
(6) NAS-Identifier = "SSO Wireless"
(6) NAS-IP-Address = 192.168.17.100
(6) Framed-MTU = 1496
(6) User-Name = "<SNIP>"
(6) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(6) Called-Station-Id = "D8-9D-67-4E-87-C6"
(6) Service-Type = Framed-User
(6) EAP-Message = 0x02850084150016030300461000004241044791ff947ad28327af6b438e98178feed47c40515f74d1363f4d16abad6b436c0570c2e187ad7a1a008b0e26c13a89b87aee42bb16e80e334676ab8cea4690a614030300010116030300280000000000000000211b36e01de3c0c52ee09a7a52632e6c97b0d3
(6) State = 0x72a278e876276d3d1ffaa038e8b9e01d
(6) Colubris-AVPair = "ssid=Weefee"
(6) Colubris-AVPair = "incoming-vlan-id=10"
(6) Colubris-AVPair = "group=<SNIP>"
(6) Colubris-AVPair = "phytype=IEEE802dot11n"
(6) Attr-26.8744.250 = 0x00000001
(6) Attr-26.8744.249 = 0x0a0b6f51
(6) Message-Authenticator = 0xb0237df6c958cc6c4cfa9ecf1dc8c53f
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 133 length 132
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x72a278e876276d3d
(6) eap: Finished EAP session with state 0x72a278e876276d3d
(6) eap: Previous EAP request found for state 0x72a278e876276d3d, released from the list
(6) eap: Peer sent packet with method EAP TTLS (21)
(6) eap: Calling submodule eap_ttls to process data
(6) eap_ttls: Authenticate
(6) eap_ttls: Continuing EAP-TLS
(6) eap_ttls: [eaptls verify] = ok
(6) eap_ttls: Done initial handshake
(6) eap_ttls: TLS_accept: SSLv3/TLS write server done
(6) eap_ttls: <<< recv TLS 1.2 [length 0046]
(6) eap_ttls: TLS_accept: SSLv3/TLS read client key exchange
(6) eap_ttls: TLS_accept: SSLv3/TLS read change cipher spec
(6) eap_ttls: <<< recv TLS 1.2 [length 0010]
(6) eap_ttls: TLS_accept: SSLv3/TLS read finished
(6) eap_ttls: >>> send TLS 1.2 [length 0001]
(6) eap_ttls: TLS_accept: SSLv3/TLS write change cipher spec
(6) eap_ttls: >>> send TLS 1.2 [length 0010]
(6) eap_ttls: TLS_accept: SSLv3/TLS write finished
(6) eap_ttls: (other): SSL negotiation finished successfully
(6) eap_ttls: SSL Connection Established
(6) eap_ttls: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 134 length 61
(6) eap: EAP session adding &reply:State = 0x72a278e877246d3d
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 167 from 192.168.16.111:1812 to 192.168.17.20:41064 length 0
(6) EAP-Message = 0x0186003d158000000033140303000101160303002811eb728f3fe2ccafd699783d5a46342a3a1ee4d49b04f3a79a47f21e7b4a6bae035feb6fe8219508
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x72a278e877246d3d1ffaa038e8b9e01d
(6) Finished request
Waking up in 3.6 seconds.
(7) Received Access-Request Id 101 from 192.168.17.20:41064 to 192.168.16.111:1812 length 402
(7) Acct-Multi-Session-Id = "D8-9D-67-4E-87-C6-E8-50-8B-47-D5-3E-5C-95-22-FC-00-03-53-F6"
(7) Acct-Session-Id = "ee3ffee4-000054cb"
(7) NAS-Port = 17276
(7) NAS-Port-Type = Wireless-802.11
(7) NAS-Identifier = "SSO Wireless"
(7) NAS-IP-Address = 192.168.17.100
(7) Framed-MTU = 1496
(7) User-Name = "<SNIP>"
(7) Calling-Station-Id = "E8-50-8B-47-D5-3E"
(7) Called-Station-Id = "D8-9D-67-4E-87-C6"
(7) Service-Type = Framed-User
(7) EAP-Message = 0x0286004b150017030300400000000000000001afa305b09bffc9f1703357817529b8d64f53a78cbf94739f0941caf63bc31a7c576cac9362b14492c9f9e33926149ba6615e4d6d63ef28cc
(7) State = 0x72a278e877246d3d1ffaa038e8b9e01d
(7) Colubris-AVPair = "ssid=Weefee"
(7) Colubris-AVPair = "incoming-vlan-id=10"
(7) Colubris-AVPair = "group=<SNIP>"
(7) Colubris-AVPair = "phytype=IEEE802dot11n"
(7) Attr-26.8744.250 = 0x00000001
(7) Attr-26.8744.249 = 0x0a0b6f51
(7) Message-Authenticator = 0xfd2469a7e7988f9f46ed4f15b4f3cd7f
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 134 length 75
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x72a278e877246d3d
(7) eap: Finished EAP session with state 0x72a278e877246d3d
(7) eap: Previous EAP request found for state 0x72a278e877246d3d, released from the list
(7) eap: Peer sent packet with method EAP TTLS (21)
(7) eap: Calling submodule eap_ttls to process data
(7) eap_ttls: Authenticate
(7) eap_ttls: Continuing EAP-TLS
(7) eap_ttls: [eaptls verify] = ok
(7) eap_ttls: Done initial handshake
(7) eap_ttls: [eaptls process] = ok
(7) eap_ttls: Session established. Proceeding to decode tunneled attributes
(7) eap_ttls: Got tunneled request
(7) eap_ttls: User-Name = "<SNIP>"
(7) eap_ttls: User-Password = "<SNIP>"
(7) eap_ttls: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_ttls: Sending tunneled request
(7) Virtual server inner-tunnel received request
(7) User-Name = "<SNIP>"
(7) User-Password = "<SNIP>"
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) WARNING: Outer and inner identities are the same. User privacy is compromised.
(7) server inner-tunnel {
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "<SNIP>", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: No EAP-Message, not doing EAP
(7) [eap] = noop
(7) [files] = noop
rlm_ldap (ldap): Reserved connection (8)
(7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap: --> (uid=<SNIP>)
(7) ldap: Performing search in "dc=<SNIP>,dc=<SNIP>" with filter "(uid=<SNIP>)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN "uid=<SNIP>,ou=IT,ou=Users,dc=<SNIP>,dc=<SNIP>"
(7) ldap: Processing user attributes
(7) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (8)
Need 1 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (10), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) [ldap] = ok
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) } # authorize = ok
(7) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> <SNIP>
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) update outer.session-state {
(7) &Module-Failure-Message := &request:Module-Failure-Message -> 'No Auth-Type found: rejecting the user via Post-Auth-Type = Reject'
(7) } # update outer.session-state = noop
(7) } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) eap_ttls: Got tunneled Access-Reject
(7) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed
(7) eap: Sending EAP Failure (code 4) ID 134 length 4
(7) eap: Failed in EAP select
(7) [eap] = invalid
(7) } # authenticate = invalid
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> <SNIP>
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) [eap] = noop
(7) policy remove_reply_message_if_eap {
(7) if (&reply:EAP-Message && &reply:Reply-Message) {
(7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(7) else {
(7) [noop] = noop
(7) } # else = noop
(7) } # policy remove_reply_message_if_eap = noop
(7) } # Post-Auth-Type REJECT = updated
(7) Delaying response for 1.000000 seconds
Waking up in 0.9 seconds.
(7) Sending delayed response
(7) Sent Access-Reject Id 101 from 192.168.16.111:1812 to 192.168.17.20:41064 length 44
(7) EAP-Message = 0x04860004
(7) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 2.0 seconds.
(1) Cleaning up request packet ID 119 with timestamp +925
Waking up in 1.2 seconds.
(2) Cleaning up request packet ID 18 with timestamp +925
(3) Cleaning up request packet ID 51 with timestamp +926
(4) Cleaning up request packet ID 70 with timestamp +926
(5) Cleaning up request packet ID 184 with timestamp +926
(6) Cleaning up request packet ID 167 with timestamp +926
Waking up in 0.6 seconds.
-------------- next part --------------
root at freeradius:~# freeradius -X
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/accounting
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 192.168.17.20/32 {
ipaddr = 192.168.17.20
ipv4addr = 192.168.17.20
require_message_authenticator = no
secret = <<< secret >>>
shortname = "HPWireless"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client DEVFreeRadius {
ipaddr = 192.168.16.252
ipv4addr = 192.168.16.252
require_message_authenticator = no
secret = <<< secret >>>
shortname = "DEVFreeRadius"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client ldap_<SNIP>_<SNIP>_static {
ipaddr = 10.11.111.81
ipv4addr = 10.11.111.81
require_message_authenticator = no
secret = <<< secret >>>
shortname = "LDAPTest"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loading module "linelog_recv_request" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_recv_request {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Recv-Request, %{pairs:request:}"
}
# Loading module "linelog_send_accept" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_send_accept {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Send-Accept, %{pairs:request:}"
}
# Loading module "linelog_send_reject" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_send_reject {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Send-Reject, %{pairs:request:}"
}
# Loading module "linelog_send_proxy_request" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_send_proxy_request {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
format = "action = Send-Proxy-Request, %{pairs:proxy-request:}"
}
# Loading module "linelog_recv_proxy_response" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog linelog_recv_proxy_response {
filename = "syslog"
escape_filenames = no
syslog_facility = "local0"
syslog_severity = "debug"
permissions = 384
reference = "messages.%{proxy-reply:Response-Packet-Type}"
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "ldaps://ldap.google.com:636"
identity = "<SNIP>"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "dc=<SNIP>,dc=<SNIP>"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
certificate_file = "/etc/freeradius/3.0/certs/ldap-client.pem"
private_key_file = "/etc/freeradius/3.0/certs/ldap-client.pem"
start_tls = no
require_cert = "allow"
}
}
Creating attribute LDAP-Group
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
instantiate {
}
# Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/3.0/certs/server.key"
certificate_file = "/etc/freeradius/3.0/certs/server.pem"
ca_file = "/etc/freeradius/3.0/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = yes
lifetime = 48
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_recv_request" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_send_accept" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_send_reject" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_send_proxy_request" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "linelog_recv_proxy_response" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20445
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
rlm_ldap (ldap): Couldn't find configuration for post-auth, will return NOOP for calls from this section
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:332
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 46249
Listening on proxy address :: port 39069
Ready to process requests
More information about the Freeradius-Users
mailing list