MSCHAP No logon servers are currently available
L.P.H. van Belle
belle at bazuin.nl
Thu Aug 12 11:49:29 CEST 2021
Hai,
Please read :
https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_Directory
This one is at the moment the only page with the complete info you need..
(for this error)
@Alan,
These pages are not fully correct.
http://deployingradius.com/documents/configuration/active_directory.html
Its not complete. (sorry).. You did add the part about : ntlm auth = mschapv2-and-ntlmv2-only
Just, im not seeing these parts. : --allow-mschapv2
Which is key to make it work.
https://wiki.freeradius.org/guide/freeradius-active-directory-integration-howto
Also i see incorrect SMB.conf settings and both are missing the part to use NTLMv2.
The link to the samba wiki contain all needed info for the freeradius part.
For the smb.conf part, that depends if its a stand alone samba server of domain member/AD-DC.
Updating these could save you lots of message in the list. ;-)
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: Freeradius-Users
> [mailto:freeradius-users-bounces+belle=bazuin.nl at lists.freerad
> ius.org] Namens Jure Simši?? via Freeradius-Users
> Verzonden: donderdag 12 augustus 2021 11:07
> Aan: Freeradius-Users
> CC: Jure Simši??
> Onderwerp: MSCHAP No logon servers are currently available
>
> Hi,
> I've been trying to set up radius+AD integration. I'm
> following the docs
> http://deployingradius.com/documents/configuration/active_dire
> ctory.html and everything is ok until I get to the last part
> where I enable ntlm_auth in mods/mschap. I'm getting back
>
> (0) mschap: ERROR: Program returned code (1) and output 'No
> logon servers are currently available to service the logon
> request. (0xc000005e)'
> (0) mschap: ERROR: No logon servers are currently available
> to service the logon request. (0xc000005e)
> (0) mschap: Authentication failed
>
> (full debug below). I've found a thread
> https://serverfault.com/questions/608227/authentication-via-ra
> dius-mschapv2-error-691 saying there is a reg setting for win
> to force radius to use ntlm2 but the link on MS KB is dead
> and their search isn't useful.. Does this seem to be this
> NTLM/NTLM2 issue or might it be something else?
>
> Also the users here are used to using their name at domain in
> their current setup and ntlm_auth expects just name as
> --username and not name at domain. I've seen the use of
> Stripped-User-Name but it seems you need to ~activate it
> somehow to use it. If I can use this there will be less
> confusion with the users. Is this possible?
>
>
> Thank you
> Cheers Jure
>
> ====================
> # freeradius -X
> FreeRADIUS Version 3.0.17
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/3.0/dictionary
> including configuration file /etc/freeradius/3.0/radiusd.conf
> including configuration file /etc/freeradius/3.0/proxy.conf
> including configuration file /etc/freeradius/3.0/clients.conf
> including files in directory /etc/freeradius/3.0/mods-enabled/
> including configuration file
> /etc/freeradius/3.0/mods-enabled/preprocess
> including configuration file
> /etc/freeradius/3.0/mods-enabled/replicate
> including configuration file
> /etc/freeradius/3.0/mods-enabled/expiration
> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> including configuration file
> /etc/freeradius/3.0/mods-enabled/logintime
> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> including configuration file /etc/freeradius/3.0/mods-enabled/files
> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> including configuration file
> /etc/freeradius/3.0/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> including configuration file /etc/freeradius/3.0/mods-enabled/always
> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> including configuration file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> including configuration file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> including configuration file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> including configuration file
> /etc/freeradius/3.0/mods-enabled/detail.log
> including files in directory /etc/freeradius/3.0/policy.d/
> including configuration file /etc/freeradius/3.0/policy.d/filter
> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> including configuration file /etc/freeradius/3.0/policy.d/control
> including configuration file
> /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> including configuration file
> /etc/freeradius/3.0/policy.d/canonicalization
> including configuration file /etc/freeradius/3.0/policy.d/accounting
> including configuration file /etc/freeradius/3.0/policy.d/eap
> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> including configuration file
> /etc/freeradius/3.0/policy.d/operator-name
> including configuration file /etc/freeradius/3.0/policy.d/debug
> including configuration file /etc/freeradius/3.0/policy.d/cui
> including files in directory /etc/freeradius/3.0/sites-enabled/
> including configuration file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/3.0/sites-enabled/default
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client FMFUnifiController {
> ipaddr = 10.20.12.2
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = ntlm_auth
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = digest
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> preprocess {
> huntgroups =
> "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file
> /etc/freeradius/3.0/mods-enabled/replicate
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
> # Loaded module rlm_utf8
> # Loading module "utf8" from file
> /etc/freeradius/3.0/mods-enabled/utf8
> # Loaded module rlm_logintime
> # Loading module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file
> /etc/freeradius/3.0/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567
> 89.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_files
> # Loading module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> files {
> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> acctusersfile =
> "/etc/freeradius/3.0/mods-config/files/accounting"
> preproxy_usersfile =
> "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file
> /etc/freeradius/3.0/mods-enabled/unpack
> # Loaded module rlm_eap
> # Loading module "eap" from file
> /etc/freeradius/3.0/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
> detail {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
> ket-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file
> /etc/freeradius/3.0/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_mschap
> # Loading module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> --username=%{mschap:User-Name:-None}
> --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI}
> --challenge=%{mschap:Challenge:-00}
> --nt-response=%{mschap:NT-Response:-00}"
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_exec
> # Loading module "ntlm_auth" from file
> /etc/freeradius/3.0/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/usr/bin/ntlm_auth --request-nt-key
> --domain=FMF.UNI-LJ.SI --username=%{mschap:User-Name}
> --password=%{User-Password}"
> shell_escape = yes
> }
> # Loading module "exec" from file
> /etc/freeradius/3.0/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "echo" from file
> /etc/freeradius/3.0/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_always
> # Loading module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file
> /etc/freeradius/3.0/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file
> /etc/freeradius/3.0/mods-enabled/chap
> # Loaded module rlm_soh
> # Loading module "soh" from file
> /etc/freeradius/3.0/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from
> file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "radutmp" from file
> /etc/freeradius/3.0/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file
> /etc/freeradius/3.0/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> # Loaded module rlm_pap
> # Loading module "pap" from file
> /etc/freeradius/3.0/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loading module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
> ket-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
> ket-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
> ket-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Pac
> ket-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> instantiate {
> }
> # Instantiating module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> reading pairlist file
> /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> # Instantiating module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
> # Instantiating module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
> # Instantiating module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> # Instantiating module "eap" from file
> /etc/freeradius/3.0/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/3.0/certs"
> pem_file_type = yes
> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> ca_file = "/etc/ssl/certs/ca-certificates.crt"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/3.0/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> ecdh_curve = "prime256v1"
> tls_max_version = ""
> tls_min_version = "1.0"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
> # Instantiating module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
> # Instantiating module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
> rlm_cache_rbtree) loaded and linked
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from
> file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11
> Check item "FreeRADIUS-Response-Delay" found in filter
> list for realm "DEFAULT".
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11
> Check item "FreeRADIUS-Response-Delay-USec" found in filter
> list for realm "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from
> file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response"
> from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> # Instantiating module "pap" from file
> /etc/freeradius/3.0/mods-enabled/pap
> # Instantiating module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not
> appear in detail output
> # Instantiating module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/3.0/radiusd.conf
> } # server
> server inner-tunnel { # from file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /etc/freeradius/3.0/sites-enabled/inner-tunnel:335
> } # server inner-tunnel
> server default { # from file /etc/freeradius/3.0/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to
> server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 46672
> Listening on proxy address :: port 50901
> Ready to process requests
> (0) Received Access-Request Id 46 from 127.0.0.1:45380 to
> 127.0.0.1:1812 length 132
> (0) User-Name = "simsic"
> (0) NAS-IP-Address = 127.0.1.1
> (0) NAS-Port = 0
> (0) Message-Authenticator = 0x88a617ddc7958578159dfd6d5f7e5a96
> (0) MS-CHAP-Challenge = 0x70721771d4df83b1
> (0) MS-CHAP-Response =
> 0x00010000000000000000000000000000000000000000000000000fd2084c
> 631219aaeac7af9d60484cf20f14d37c7dffff42
> (0) # Executing section authorize from file
> /etc/freeradius/3.0/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~
> /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~
> /@(.+)\.(.+)$/)) -> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
> (0) [mschap] = ok
> (0) [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "simsic", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: No EAP-Message, not doing EAP
> (0) [eap] = noop
> (0) [files] = noop
> (0) [expiration] = noop
> (0) [logintime] = noop
> (0) pap: WARNING: No "known good" password found for the
> user. Not setting Auth-Type
> (0) pap: WARNING: Authentication will fail unless a "known
> good" password is available
> (0) [pap] = noop
> (0) } # authorize = ok
> (0) Found Auth-Type = mschap
> (0) # Executing group from file
> /etc/freeradius/3.0/sites-enabled/default
> (0) authenticate {
> (0) mschap: Client is using MS-CHAPv1 with NT-Password
> (0) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key
> --username=%{mschap:User-Name:-None}
> --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI}
> --challenge=%{mschap:Challenge:-00}
> --nt-response=%{mschap:NT-Response:-00}:
> (0) mschap: EXPAND --username=%{mschap:User-Name:-None}
> (0) mschap: --> --username=simsic
> (0) mschap: ERROR: No NT-Domain was found in the User-Name
> (0) mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-FMF.UNI-LJ.SI}
> (0) mschap: --> --domain=FMF.UNI-LJ.SI
> (0) mschap: mschap1: 70
> (0) mschap: EXPAND --challenge=%{mschap:Challenge:-00}
> (0) mschap: --> --challenge=70721771d4df83b1
> (0) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00}
> (0) mschap: -->
> --nt-response=0fd2084c631219aaeac7af9d60484cf20f14d37c7dffff42
> (0) mschap: ERROR: Program returned code (1) and output 'No
> logon servers are currently available to service the logon
> request. (0xc000005e)'
> (0) mschap: ERROR: No logon servers are currently available
> to service the logon request. (0xc000005e)
> (0) mschap: Authentication failed
> (0) [mschap] = fail
> (0) } # authenticate = fail
> (0) Failed to authenticate the user
> (0) Using Post-Auth-Type Reject
> (0) # Executing group from file
> /etc/freeradius/3.0/sites-enabled/default
> (0) Post-Auth-Type REJECT {
> (0) attr_filter.access_reject: EXPAND %{User-Name}
> (0) attr_filter.access_reject: --> simsic
> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (0) [attr_filter.access_reject] = updated
> (0) [eap] = noop
> (0) policy remove_reply_message_if_eap {
> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (0) else {
> (0) [noop] = noop
> (0) } # else = noop
> (0) } # policy remove_reply_message_if_eap = noop
> (0) } # Post-Auth-Type REJECT = updated
> (0) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (0) Sending delayed response
> (0) Sent Access-Reject Id 46 from 127.0.0.1:1812 to
> 127.0.0.1:45380 length 61
> (0) MS-CHAP-Error = "\000E=691 R=1 C=fdeee1d540dd4525 V=2"
> Waking up in 3.9 seconds.
> (0) Cleaning up request packet ID 46 with timestamp +5
> Ready to process requests
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list