post-auth | ldap-group | huntgroup
Markus Demmert (BESITEC-DEHAM)
MDemmert at besitec.com
Fri Feb 5 16:37:40 CET 2021
Sorry I overread
> So... where is the the Huntrgoup-Name coming from?
I edited the file huntgroup with the following:
cisco-group NAS-IP-Address == 10.3.10.10
Thh,
MaDe
>Hi,
>Thanks for your reply here is the debug output.
>FreeRADIUS Version 3.0.20
>Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
>There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>PARTICULAR PURPOSE
>You may redistribute copies of FreeRADIUS under the terms of the
>GNU General Public License
>For more information about these matters, see the file named COPYRIGHT
>Starting - reading configuration files ...
>including dictionary file /usr/share/freeradius/dictionary
>including dictionary file /usr/share/freeradius/dictionary.dhcp
>including dictionary file /usr/share/freeradius/dictionary.vqp
>including dictionary file /etc/freeradius/3.0/dictionary
>including configuration file /etc/freeradius/3.0/radiusd.conf
>including configuration file /etc/freeradius/3.0/proxy.conf
>including configuration file /etc/freeradius/3.0/clients.conf
>including files in directory /etc/freeradius/3.0/mods-enabled/
>including configuration file /etc/freeradius/3.0/mods-enabled/replicate
>including configuration file /etc/freeradius/3.0/mods-enabled/ldap
>including configuration file /etc/freeradius/3.0/mods-enabled/passwd
>including configuration file /etc/freeradius/3.0/mods-enabled/always
>including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
>including configuration file /etc/freeradius/3.0/mods-enabled/chap
>including configuration file /etc/freeradius/3.0/mods-enabled/pap
>including configuration file /etc/freeradius/3.0/mods-enabled/digest
>including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
>including configuration file /etc/freeradius/3.0/mods-enabled/linelog
>including configuration file /etc/freeradius/3.0/mods-enabled/realm
>including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
>including configuration file /etc/freeradius/3.0/mods-enabled/unpack
>including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
>including configuration file /etc/freeradius/3.0/mods-enabled/utf8
>including configuration file /etc/freeradius/3.0/mods-enabled/echo
>including configuration file /etc/freeradius/3.0/mods-enabled/eap
>including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
>including configuration file /etc/freeradius/3.0/mods-enabled/soh
>including configuration file /etc/freeradius/3.0/mods-enabled/unix
>including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
>including configuration file /etc/freeradius/3.0/mods-enabled/detail
>including configuration file /etc/freeradius/3.0/mods-enabled/exec
>including configuration file /etc/freeradius/3.0/mods-enabled/expiration
>including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
>including configuration file /etc/freeradius/3.0/mods-enabled/logintime
>including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
>including configuration file /etc/freeradius/3.0/mods-enabled/expr
>including configuration file /etc/freeradius/3.0/mods-enabled/mschap
>including configuration file /etc/freeradius/3.0/mods-enabled/files
>including files in directory /etc/freeradius/3.0/policy.d/
>including configuration file /etc/freeradius/3.0/policy.d/filter
>including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
>including configuration file /etc/freeradius/3.0/policy.d/rfc7542
>including configuration file /etc/freeradius/3.0/policy.d/accounting
>including configuration file /etc/freeradius/3.0/policy.d/operator-name
>including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
>including configuration file /etc/freeradius/3.0/policy.d/debug
>including configuration file /etc/freeradius/3.0/policy.d/canonicalization
>including configuration file /etc/freeradius/3.0/policy.d/eap
>including configuration file /etc/freeradius/3.0/policy.d/dhcp
>including configuration file /etc/freeradius/3.0/policy.d/control
>including configuration file /etc/freeradius/3.0/policy.d/cui
>including files in directory /etc/freeradius/3.0/sites-enabled/
>including configuration file /etc/freeradius/3.0/sites-enabled/ldap-network
>including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
>main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
>}
>main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
>}
>radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
>radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 10.3.3.10
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client cisco {
> ipaddr = 10.3.10.10/24
> require_message_authenticator = no
> secret = <<< secret >>>
> virtual_server = "ldap-network"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
>Debugger not attached
>systemd watchdog is disabled
> # Creating Auth-Type = LDAP
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
>radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
> # Loaded module rlm_ldap
> # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
> ldap {
> server = "ldaps://bg-deham-dc"
> identity = "cn=service.network.ldap,ou=service,ou=infrastructure,ou=user,dc=fhbertling,dc=local"
> password = <<< secret >>>
> sasl {
> }
> user_dn = "LDAP-UserDn"
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=group)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> allow_dangling_group_ref = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "ou=user,dc=fhbertling,dc=local"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> ca_file = "/etc/ssl/certs/fhbertling_root.pem"
> start_tls = no
> require_cert = "never"
> }
> }
>Creating attribute LDAP-Group
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_exec
> # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
> # Loaded module rlm_detail
> # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail auth_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail reply_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
>Creating attribute Unix-Group
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
> detail {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
> # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
> files {
> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> }
> instantiate {
> }
> # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
>rlm_ldap: libldap vendor: OpenLDAP, version: 20449
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
>rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
>rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
>rlm_ldap (ldap): Connecting to ldaps://bg-deham-dc:636 ldaps://bg-deham-dc2:636
>rlm_ldap (ldap): Waiting for bind result...
>rlm_ldap (ldap): Bind successful
>rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
>rlm_ldap (ldap): Connecting to ldaps://bg-deham-dc:636 ldaps://bg-deham-dc2:636
>rlm_ldap (ldap): Waiting for bind result...
>rlm_ldap (ldap): Bind successful
>rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
>rlm_ldap (ldap): Connecting to ldaps://bg-deham-dc:636 ldaps://bg-deham-dc2:636
>rlm_ldap (ldap): Waiting for bind result...
>rlm_ldap (ldap): Bind successful
>rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
>rlm_ldap (ldap): Connecting to ldaps://bg-deham-dc:636 ldaps://bg-deham-dc2:636
>rlm_ldap (ldap): Waiting for bind result...
>rlm_ldap (ldap): Bind successful
>rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
>rlm_ldap (ldap): Connecting to ldaps://bg-deham-dc:636 ldaps://bg-deham-dc2:636
>rlm_ldap (ldap): Waiting for bind result...
>rlm_ldap (ldap): Bind successful
> # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
>rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
>rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
>reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
>reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/3.0/certs"
> pem_file_type = yes
> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> ca_file = "/etc/ssl/certs/ca-certificates.crt"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/3.0/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> ecdh_curve = "prime256v1"
> disable_tlsv1 = yes
> disable_tlsv1_1 = yes
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
>Please use tls_min_version and tls_max_version instead of disable_tlsv1
>Please use tls_min_version and tls_max_version instead of disable_tlsv1_2
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
>tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
>tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
>rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
> # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
> # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
> # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
> # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
>reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
>reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
>reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
>reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
>reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
>rlm_mschap (mschap): using internal authentication
> # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
>reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
>reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
>reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> } # modules
>radiusd: #### Loading Virtual Servers ####
>server { # from file /etc/freeradius/3.0/radiusd.conf
>} # server
>server ldap-network { # from file /etc/freeradius/3.0/sites-enabled/ldap-network
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-auth {...}
>} # server ldap-network
>server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
>Ignoring "sql" (see raddb/mods-available/README.rst)
> # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
>} # server inner-tunnel
>radiusd: #### Opening IP addresses and Ports ####
>listen {
> type = "auth"
> ipv4addr = 10.3.3.10
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
>}
>listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
>}
>listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
>}
>listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
>}
>listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
>}
>Listening on auth address 10.3.3.10 port 1812 bound to server ldap-network
>Listening on acct address * port 1813 bound to server ldap-network
>Listening on auth address :: port 1812 bound to server ldap-network
>Listening on acct address :: port 1813 bound to server ldap-network
>Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
>Listening on proxy address * port 34537
>Listening on proxy address :: port 58493
>
>----------------------------------
>Ready to process requests
>(0) Received Access-Request Id 19 from 10.3.10.10:49205 to 10.3.3.10:1812 length 94
>(0) User-Name = "user.name"
>(0) User-Password = "pass.word"
>(0) Cisco-AVPair = "shell:priv-lvl=1"
>(0) NAS-IP-Address = 0.0.0.0
>(0) Acct-Session-Id = "0500015B"
>(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/ldap-network
>(0) authorize {
>(0) policy filter_username {
>(0) if (&User-Name) {
>(0) if (&User-Name) -> TRUE
>(0) if (&User-Name) {
>(0) if (&User-Name =~ / /) {
>(0) if (&User-Name =~ / /) -> FALSE
>(0) if (&User-Name =~ /@[^@]*@/ ) {
>(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>(0) if (&User-Name =~ /\.\./ ) {
>(0) if (&User-Name =~ /\.\./ ) -> FALSE
>(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
>(0) if (&User-Name =~ /\.$/) {
>(0) if (&User-Name =~ /\.$/) -> FALSE
>(0) if (&User-Name =~ /@\./) {
>(0) if (&User-Name =~ /@\./) -> FALSE
>(0) } # if (&User-Name) = notfound
>(0) } # policy filter_username = notfound
>(0) [preprocess] = ok
>(0) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
>(0) auth_log: --> /var/log/freeradius/radacct/10.3.10.10/auth-detail-20210205
>(0) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/10.3.10.10/auth-detail-20210205
>(0) auth_log: EXPAND %t
>(0) auth_log: --> Fri Feb 5 14:34:58 2021
>(0) [auth_log] = ok
>rlm_ldap (ldap): Reserved connection (0)
>(0) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})
>(0) ldap: --> (samaccountname=user.name)
>(0) ldap: Performing search in "ou=XXXX,dc=XXXXXX,dc=local" with filter "(samaccountname=user.name)", scope "sub"
>(0) ldap: Waiting for search result...
>(0) ldap: User object found at DN "CN=UserName,OU=XXX Systems,OU=XXXX,OU=XXXXX,OU=XXX,DC=XXXXXX,DC=local"
>(0) ldap: Processing user attributes
>(0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
>(0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
>rlm_ldap (ldap): Released connection (0)
>Need 5 more connections to reach 10 spares
>rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
>rlm_ldap (ldap): Connecting to ldaps://xx-xxxx-xx:636 ldaps://xx-xxxx-xx2:636
>rlm_ldap (ldap): Waiting for bind result...
>rlm_ldap (ldap): Bind successful
>(0) [ldap] = ok
>(0) if ((ok || updated) && User-Password && !control:Auth-Type) {
>(0) if ((ok || updated) && User-Password && !control:Auth-Type) -> TRUE
>(0) if ((ok || updated) && User-Password && !control:Auth-Type) {
>(0) update {
>(0) control:Auth-Type := LDAP
>(0) } # update = noop
>(0) } # if ((ok || updated) && User-Password && !control:Auth-Type) = noop
>(0) [expiration] = noop
>(0) [logintime] = noop
>(0) } # authorize = ok
>(0) Found Auth-Type = LDAP
>(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/ldap-network
>(0) Auth-Type LDAP {
>rlm_ldap (ldap): Reserved connection (1)
>(0) ldap: Login attempt by "user.name"
>(0) ldap: Using user DN from request "CN=UserName,OU=XXX Systems,OU=XXXX,OU=XXXXX,OU=XXX,DC=XXXXXX,DC=local"
>(0) ldap: Waiting for bind result...
>(0) ldap: Bind successful
>(0) ldap: Bind as user CN=UserName,OU=XXX Systems,OU=XXXX,OU=XXXXX,OU=XXX,DC=XXXXXX,DC=local" was successful
>rlm_ldap (ldap): Released connection (1)
>(0) [ldap] = ok
>(0) } # Auth-Type LDAP = ok
>(0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/ldap-network
>(0) post-auth {
>(0) if (Huntgroup-Name == "cisco-group") {
>(0) ERROR: Failed retrieving values required to evaluate condition
>(0) else {
>(0) [reject] = reject
>(0) } # else = reject
>(0) } # post-auth = reject
>(0) Using Post-Auth-Type Reject
>(0) Post-Auth-Type sub-section not found. Ignoring.
>(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/ldap-network
>(0) Delaying response for 1.000000 seconds
>Waking up in 0.3 seconds.
>Waking up in 0.6 seconds.
>(0) Sending delayed response
>(0) Sent Access-Reject Id 19 from 10.3.3.10:1812 to 10.3.10.10:49205 length 20
>Good day,
>
>I have problems to get this running:
>-----------------------------------------------------------------------
>-------------------
>if (Huntgroup-Name == "cisco-group") {
> if (Ldap-Group == "Group_Network_Device_RW") {
> update reply {
> cisco-avpair = "shell:priv-lvl=15"
> }
> }
> }
> else {
> reject
> }
>-----------------------------------------------------------------------
>------------------
>I get this debug output:
>-----------------------------------------------------------------------------------------
>(0) [ldap] = ok
>(0) } # Auth-Type LDAP = ok
>(0) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/ldap-network
>(0) post-auth {
>(0) if (Huntgroup-Name == "cisco-group") {
>(0) ERROR: Failed retrieving values required to evaluate condition
>(0) else {
>(0) [reject] = reject
>-----------------------------------------------------------------------
>------------------ When I remove the huntgroup line it is working and I
>can authenticate against a network device. But in combination with the huntgroup I get this error.
>What I am doing wrong? Can someone point me in the right direction.
>Many thanks,
>MaDe
More information about the Freeradius-Users
mailing list