Accounting Packet not sent
Michael Fischer
michael at webfischer.at
Tue Feb 16 14:45:30 CET 2021
On Tue, 2021-02-16 at 14:38 +0100, Michael Fischer wrote:
> Hi!
>
> My goal is to authenticate WiFi-Users via FreeRadius with an eDirectory
> backend. FreeRadius should then send an accounting packet to a
> FortiGate firewall where a SSO agent is running.
>
> The authentication part is working find, a user can connect to the
> WiFi.
>
> As far as I understood it, I should configure FreeRadius to write a
> detail file which is then parsed an an accounting package sent to the
> Fortigate firewall.
> I configured a realm in proxy.conf:
> realm Fortigate {
> accthost = 172.16.1.253
> secret = ***********
> }
>
> And I enabled the site "copy-accounting-to-home-server" with the
> following configuration:
>
> server copy-acct-to-home-server {
> listen {
> type = detail
> filename = ${radacctdir}/detail-*
> load_factor = 10
> }
>
> preacct {
> preprocess
> suffix
> files
> update control {
> Proxy-To-Realm := 'Fortigate'
> }
> }
>
> accounting {
> ok
> }
>
> pre-proxy {
> }
>
> post-proxy {
> }
> }
>
> Reading the detail file seems to work fine, but no accounting package
> is sent to the FortiGate firewall (I even checked using Wireshark). See
> a part of the debug-log here:
> (9) Login OK: [fimi] (from client private-network-1 port 0 cli F4-60-
> E2-B3-96-5C)
> (9) Sent Access-Accept Id 107 from 172.16.1.104:1812 to
> 192.168.251.51:39578 length 0
> (9) Class := 0x54657374
> (9) MS-MPPE-Recv-Key =
> 0x28765691676b5035b99c8aa3b2b5bb8c1e9b4b3e32a457239e11df0cdac127ea
> (9) MS-MPPE-Send-Key =
> 0x1120b9224c29ff96b3ed507b19eabd80bb1c7728772cbe8305a876cede81c224
> (9) EAP-Message = 0x03d10004
> (9) Message-Authenticator = 0x00000000000000000000000000000000
> (9) User-Name += "fimi"
> (9) Finished request
> Waking up in 4.8 seconds.
> detail (/var/log/radius/radacct/detail-*): Polling for detail file
> detail (/var/log/radius/radacct/detail-*): Renaming
> /var/log/radius/radacct/detail-192.168.251.51-20210216 ->
> /var/log/radius/radacct/detail.work
> detail (/var/log/radius/radacct/detail-*): Read packet from
> /var/log/radius/radacct/detail.work
> Packet-Type = Access-Accept
> Class = 0x54657374
> User-Name = "fimi"
> MS-MPPE-Recv-Key =
> 0x28765691676b5035b99c8aa3b2b5bb8c1e9b4b3e32a457239e11df0cdac127ea
> MS-MPPE-Send-Key =
> 0x1120b9224c29ff96b3ed507b19eabd80bb1c7728772cbe8305a876cede81c224
> EAP-MSK =
> 0x28765691676b5035b99c8aa3b2b5bb8c1e9b4b3e32a457239e11df0cdac127ea1120b
> 9224c29ff96b3ed507b19eabd80bb1c7728772cbe8305a876cede81c224
> EAP-EMSK =
> 0xd3a64e1f290603568302a9f6c13c3ae00eaea0f45caeff1503b5609e2faf9b06be114
> 12f1243564b0a08b8df5d58cc33235989699b860f0171b9b73a29bb0e36
> EAP-Session-Id =
> 0x19c2bce2a85918a3ba9ea0068fd39acacb8173753f6c2a19ac67249b606157c82923f
> 2dacd82dc178f0df970ea5031e0e57b82ad5100de437f43b4f8303af37cae
> EAP-Message = 0x03d10004
> Message-Authenticator = 0x00000000000000000000000000000000
> Packet-Original-Timestamp = "Feb 16 2021 14:22:24 CET"
> Packet-Transmit-Counter = 1
> Waking up in 4.6 seconds.
>
> See full debug-log attached.
>
> I would really appreciate your help!
>
> Thanks, Mike
Hi again!
As I received my E-Mail from the List without attachment - here is the
debug output:
FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb//dictionary
including configuration file /etc/raddb//radiusd.conf
including configuration file /etc/raddb//proxy.conf
including configuration file /etc/raddb//clients.conf
including files in directory /etc/raddb//mods-enabled/
including configuration file /etc/raddb//mods-enabled/always
including configuration file /etc/raddb//mods-enabled/attr_filter
including configuration file /etc/raddb//mods-enabled/cache_eap
including configuration file /etc/raddb//mods-enabled/chap
including configuration file /etc/raddb//mods-enabled/date
including configuration file /etc/raddb//mods-enabled/detail
including configuration file /etc/raddb//mods-enabled/digest
including configuration file /etc/raddb//mods-enabled/dynamic_clients
including configuration file /etc/raddb//mods-enabled/eap
including configuration file /etc/raddb//mods-enabled/echo
including configuration file /etc/raddb//mods-enabled/exec
including configuration file /etc/raddb//mods-enabled/expiration
including configuration file /etc/raddb//mods-enabled/expr
including configuration file /etc/raddb//mods-enabled/files
including configuration file /etc/raddb//mods-enabled/linelog
including configuration file /etc/raddb//mods-enabled/logintime
including configuration file /etc/raddb//mods-enabled/mschap
including configuration file /etc/raddb//mods-enabled/ntlm_auth
including configuration file /etc/raddb//mods-enabled/pap
including configuration file /etc/raddb//mods-enabled/passwd
including configuration file /etc/raddb//mods-enabled/preprocess
including configuration file /etc/raddb//mods-enabled/radutmp
including configuration file /etc/raddb//mods-enabled/realm
including configuration file /etc/raddb//mods-enabled/replicate
including configuration file /etc/raddb//mods-enabled/soh
including configuration file /etc/raddb//mods-enabled/sradutmp
including configuration file /etc/raddb//mods-enabled/unix
including configuration file /etc/raddb//mods-enabled/unpack
including configuration file /etc/raddb//mods-enabled/utf8
including configuration file /etc/raddb//mods-enabled/ldap
including files in directory /etc/raddb//policy.d/
including configuration file /etc/raddb//policy.d/abfab-tr
including configuration file /etc/raddb//policy.d/accounting
including configuration file /etc/raddb//policy.d/canonicalization
including configuration file /etc/raddb//policy.d/control
including configuration file /etc/raddb//policy.d/cui
including configuration file /etc/raddb//policy.d/debug
including configuration file /etc/raddb//policy.d/dhcp
including configuration file /etc/raddb//policy.d/eap
including configuration file /etc/raddb//policy.d/filter
including configuration file /etc/raddb//policy.d/moonshot-targeted-ids
including configuration file /etc/raddb//policy.d/operator-name
including configuration file /etc/raddb//policy.d/rfc7542
including files in directory /etc/raddb//sites-enabled/
including configuration file /etc/raddb//sites-enabled/default
including configuration file /etc/raddb//sites-enabled/inner-tunnel
including configuration file /etc/raddb//sites-enabled/copy-acct-to-
home-server
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
realm Fortigate {
accthost = 172.16.1.253
secret = <<< secret >>>
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client private-network-1 {
ipaddr = 192.168.251.0/24
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb//mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb//mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb//mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb//mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb//mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb//mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb//mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb//mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb//mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/raddb//mods-
enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb//mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/raddb//mods-
enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb//mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb//mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb//mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb//mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb//mods-
config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb//mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb//mods-
config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb//mods-
enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb//mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb//mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/raddb//mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb//mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/detail-%{Packet-Src-IP-
Address}-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb//mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/raddb//mods-
enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb//mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb//mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb//mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb//mods-
enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb//mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb//mods-enabled/files
files {
filename = "/etc/raddb//mods-config/files/authorize"
acctusersfile = "/etc/raddb//mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb//mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb//mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/raddb//mods-
enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-
unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb//mods-
enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb//mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/raddb//mods-
enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --
domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-
Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb//mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb//mods-
enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb//mods-
enabled/preprocess
preprocess {
huntgroups = "/etc/raddb//mods-config/preprocess/huntgroups"
hints = "/etc/raddb//mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb//mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb//mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb//mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/raddb//mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb//mods-
enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb//mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb//mods-
enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb//mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb//mods-
enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb//mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb//mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb//mods-enabled/utf8
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/raddb//mods-enabled/ldap
ldap {
server = "ldaps://172.16.1.33"
port = 636
identity = "cn=8021xproxy,ou=server,o=htbl"
password = <<< secret >>>
sasl {
}
user_dn = "LDAP-UserDn"
edir = yes
edir_autz = yes
user {
scope = "sub"
access_attribute = "dialupAccess"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
allow_dangling_group_ref = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "o=HTBL"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
ca_file = "/etc/raddb//certs/eDirCAcert.pem"
start_tls = no
require_cert = "allow"
}
}
Creating attribute LDAP-Group
instantiate {
}
# Instantiating module "reject" from file /etc/raddb//mods-
enabled/always
# Instantiating module "fail" from file /etc/raddb//mods-
enabled/always
# Instantiating module "ok" from file /etc/raddb//mods-enabled/always
# Instantiating module "handled" from file /etc/raddb//mods-
enabled/always
# Instantiating module "invalid" from file /etc/raddb//mods-
enabled/always
# Instantiating module "userlock" from file /etc/raddb//mods-
enabled/always
# Instantiating module "notfound" from file /etc/raddb//mods-
enabled/always
# Instantiating module "noop" from file /etc/raddb//mods-
enabled/always
# Instantiating module "updated" from file /etc/raddb//mods-
enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb//mods-enabled/attr_filter
reading pairlist file /etc/raddb//mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb//mods-enabled/attr_filter
reading pairlist file /etc/raddb//mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb//mods-enabled/attr_filter
reading pairlist file /etc/raddb//mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb//mods-enabled/attr_filter
reading pairlist file /etc/raddb//mods-
config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb//mods-enabled/attr_filter
reading pairlist file /etc/raddb//mods-
config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/raddb//mods-
enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /etc/raddb//mods-
enabled/detail
# Instantiating module "eap" from file /etc/raddb//mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb//certs"
pem_file_type = yes
private_key_file = "/etc/raddb//certs/server.pem"
certificate_file = "/etc/raddb//certs/server.pem"
ca_file = "/etc/raddb//certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb//certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
disable_tlsv1 = no
disable_tlsv1_1 = no
disable_tlsv1_2 = no
tls_max_version = "1.2"
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY recommned
using only TLS 1.2 for security
Please set: tls_min_version = "1.2"
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file /etc/raddb//mods-
enabled/expiration
# Instantiating module "files" from file /etc/raddb//mods-
enabled/files
reading pairlist file /etc/raddb//mods-config/files/authorize
reading pairlist file /etc/raddb//mods-config/files/accounting
reading pairlist file /etc/raddb//mods-config/files/pre-proxy
# Instantiating module "linelog" from file /etc/raddb//mods-
enabled/linelog
# Instantiating module "log_accounting" from file /etc/raddb//mods-
enabled/linelog
# Instantiating module "logintime" from file /etc/raddb//mods-
enabled/logintime
# Instantiating module "mschap" from file /etc/raddb//mods-
enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/raddb//mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/raddb//mods-
enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/raddb//mods-
enabled/preprocess
reading pairlist file /etc/raddb//mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb//mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/raddb//mods-
enabled/realm
# Instantiating module "suffix" from file /etc/raddb//mods-
enabled/realm
# Instantiating module "bangpath" from file /etc/raddb//mods-
enabled/realm
# Instantiating module "realmpercent" from file /etc/raddb//mods-
enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb//mods-
enabled/realm
# Instantiating module "ldap" from file /etc/raddb//mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20446
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636
TLS certificate verification: Error, unable to get issuer certificate
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636
TLS certificate verification: Error, unable to get issuer certificate
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636
TLS certificate verification: Error, unable to get issuer certificate
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636
TLS certificate verification: Error, unable to get issuer certificate
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636
TLS certificate verification: Error, unable to get issuer certificate
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb//radiusd.conf
} # server
server default { # from file /etc/raddb//sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb//sites-enabled/inner-
tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/raddb//sites-enabled/inner-tunnel:345
} # server inner-tunnel
server copy-acct-to-home-server { # from file /etc/raddb//sites-
enabled/copy-acct-to-home-server
# Loading preacct {...}
# Loading accounting {...}
} # server copy-acct-to-home-server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "detail"
listen {
filename = "/var/log/radius/radacct/detail-*"
load_factor = 10
poll_interval = 1
retry_interval = 30
one_shot = no
track = no
}
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-
tunnel
Listening on detail file /var/log/radius/radacct/detail-* as server
copy-acct-to-home-server
Listening on proxy address * port 33344
Listening on proxy address :: port 45782
Ready to process requests
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 0.769579 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.219527 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.173822 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.129156 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.249627 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.031091 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 0.840066 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.239105 sec
(0) Received Access-Request Id 108 from 192.168.251.51:39578 to
172.16.1.104:1812 length 190
(0) User-Name = "fimi"
(0) NAS-Identifier = "a22aa8d26c65"
(0) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(0) Connect-Info = "CONNECT 0Mbps 802.11b"
(0) Acct-Session-Id = "6A0D6C94095D2E0A"
(0) WLAN-Pairwise-Cipher = 1027076
(0) WLAN-Group-Cipher = 1027076
(0) WLAN-AKM-Suite = 1027073
(0) Framed-MTU = 1400
(0) EAP-Message = 0x028b00090166696d69
(0) Message-Authenticator = 0xed1d56eb859202891d34ba433c96ff60
(0) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 139 length 9
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb//sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: Initiating new TLS session
(0) eap_peap: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 140 length 6
(0) eap: EAP session adding &reply:State = 0xacb59afcac3983f3
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb//sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 108 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(0) EAP-Message = 0x018c00061920
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xacb59afcac3983f3c10471c5771ffc72
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 109 from 192.168.251.51:39578 to
172.16.1.104:1812 length 340
(1) User-Name = "fimi"
(1) NAS-Identifier = "a22aa8d26c65"
(1) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(1) Connect-Info = "CONNECT 0Mbps 802.11b"
(1) Acct-Session-Id = "6A0D6C94095D2E0A"
(1) WLAN-Pairwise-Cipher = 1027076
(1) WLAN-Group-Cipher = 1027076
(1) WLAN-AKM-Suite = 1027073
(1) Framed-MTU = 1400
(1) EAP-Message =
0x028c008d198000000083160301007e0100007a030363c73063457cfb114c1273ccdcd
419324e47cc9d731c536da4118f5ca68b117700001ec02bc02fc02cc030cca9cca8c009
c013c00ac014009c009d002f0035000a0100003300170000ff01000100000a000800060
01d00170018000b00020100000d00140012040308040401050308050501080606010201
(1) State = 0xacb59afcac3983f3c10471c5771ffc72
(1) Message-Authenticator = 0x1eebb054a163ed4d02c96042b2be741d
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 140 length 141
(1) eap: Continuing tunnel setup
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb//sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xacb59afcac3983f3
(1) eap: Finished EAP session with state 0xacb59afcac3983f3
(1) eap: Previous EAP request found for state 0xacb59afcac3983f3,
released from the list
(1) eap: Peer sent packet with method EAP PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Continuing EAP-TLS
(1) eap_peap: Peer indicated complete TLS record size will be 131 bytes
(1) eap_peap: Got complete TLS record (131 bytes)
(1) eap_peap: [eaptls verify] = length included
(1) eap_peap: (other): before SSL initialization
(1) eap_peap: TLS_accept: before SSL initialization
(1) eap_peap: TLS_accept: before SSL initialization
(1) eap_peap: <<< recv TLS 1.3 [length 007e]
(1) eap_peap: TLS_accept: SSLv3/TLS read client hello
(1) eap_peap: >>> send TLS 1.2 [length 003d]
(1) eap_peap: TLS_accept: SSLv3/TLS write server hello
(1) eap_peap: >>> send TLS 1.2 [length 0903]
(1) eap_peap: TLS_accept: SSLv3/TLS write certificate
(1) eap_peap: >>> send TLS 1.2 [length 014d]
(1) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(1) eap_peap: >>> send TLS 1.2 [length 0004]
(1) eap_peap: TLS_accept: SSLv3/TLS write server done
(1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write
server done
(1) eap_peap: TLS - In Handshake Phase
(1) eap_peap: TLS - got 2725 bytes of data
(1) eap_peap: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 141 length 1004
(1) eap: EAP session adding &reply:State = 0xacb59afcad3883f3
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb//sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 109 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(1) EAP-Message =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(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xacb59afcad3883f3c10471c5771ffc72
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 110 from 192.168.251.51:39578 to
172.16.1.104:1812 length 205
(2) User-Name = "fimi"
(2) NAS-Identifier = "a22aa8d26c65"
(2) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(2) NAS-Port-Type = Wireless-802.11
(2) Service-Type = Framed-User
(2) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(2) Connect-Info = "CONNECT 0Mbps 802.11b"
(2) Acct-Session-Id = "6A0D6C94095D2E0A"
(2) WLAN-Pairwise-Cipher = 1027076
(2) WLAN-Group-Cipher = 1027076
(2) WLAN-AKM-Suite = 1027073
(2) Framed-MTU = 1400
(2) EAP-Message = 0x028d00061900
(2) State = 0xacb59afcad3883f3c10471c5771ffc72
(2) Message-Authenticator = 0x10a42051d77dc96d1a8fdb6e1790ddc7
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 141 length 6
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb//sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xacb59afcad3883f3
(2) eap: Finished EAP session with state 0xacb59afcad3883f3
(2) eap: Previous EAP request found for state 0xacb59afcad3883f3,
released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer ACKed our handshake fragment
(2) eap_peap: [eaptls verify] = request
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 142 length 1000
(2) eap: EAP session adding &reply:State = 0xacb59afcae3b83f3
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb//sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 110 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(2) EAP-Message =
0x018e03e81940252cedfbf4c3836e44225fdb79c5f5071c20dc8677feb32af525d7756
778521e8aa7957a7d648b1ba1868b19e84857fb8b172605a1f8f8a4a47ab109a8159d2f
8f5b68023e42aa2322f04ae0a25214f052122adb16ea6d8f688e58ae3759cdc84b24c20
e97f5290004fe308204fa308203e2a003020102021404394f2a191606a4278a02c0e327
b5d0dc1a1914300d06092a864886f70d01010b0500308193310b3009060355040613024
652310f300d06035504080c065261646975733112301006035504070c09536f6d657768
65726531153013060355040a0c0c4578616d706c6520496e632e3120301e06092a86488
6f70d010901161161646d696e406578616d706c652e6f72673126302406035504030c1d
4578616d706c6520436572746966696361746520417574686f72697479301e170d32313
03231333136333433395a170d3231303431343136333433395a308193310b3009060355
040613024652310f300d06035504080c0652616469
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xacb59afcae3b83f3c10471c5771ffc72
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 111 from 192.168.251.51:39578 to
172.16.1.104:1812 length 205
(3) User-Name = "fimi"
(3) NAS-Identifier = "a22aa8d26c65"
(3) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(3) NAS-Port-Type = Wireless-802.11
(3) Service-Type = Framed-User
(3) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(3) Connect-Info = "CONNECT 0Mbps 802.11b"
(3) Acct-Session-Id = "6A0D6C94095D2E0A"
(3) WLAN-Pairwise-Cipher = 1027076
(3) WLAN-Group-Cipher = 1027076
(3) WLAN-AKM-Suite = 1027073
(3) Framed-MTU = 1400
(3) EAP-Message = 0x028e00061900
(3) State = 0xacb59afcae3b83f3c10471c5771ffc72
(3) Message-Authenticator = 0xb14601361b16a123aaab75b0b82ba00c
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 142 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb//sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xacb59afcae3b83f3
(3) eap: Finished EAP session with state 0xacb59afcae3b83f3
(3) eap: Previous EAP request found for state 0xacb59afcae3b83f3,
released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 143 length 743
(3) eap: EAP session adding &reply:State = 0xacb59afcaf3a83f3
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb//sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 111 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(3) EAP-Message =
0x018f02e7190072746966696361746520417574686f72697479821404394f2a191606a
4278a02c0e327b5d0dc1a1914300f0603551d130101ff040530030101ff30360603551d
1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672
f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010084
0b869b8c26a23a9a120e670346fc3ad59f8b235ee1578ade13cd710668564a9a61b5260
ea04a54c65eaed7e37aac1a23b130517fa45fdf34576991981c3e6793f75d88cb482d64
8dd02ac3a08e2ebc23556b1b76f5f3fad93845bd775e210aa5cefd6d2baa0f871d82f34
710b0eea477ea8e26be0521ab9979c249db93590e7c0c1ad8e76dd8241c19f58ced944e
28442b8d4265a21784cd2103a23e43bcb854ebeb2c1038780b723eaaefe957e1c5d2758
2afce334ed5e623832e0ad69a5e9c5d31915eef72ff1d2115168b50e019f2cf54892574
97281e6efe5b26acc91510ffa40f528f3c1b54aa5a
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xacb59afcaf3a83f3c10471c5771ffc72
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 112 from 192.168.251.51:39578 to
172.16.1.104:1812 length 335
(4) User-Name = "fimi"
(4) NAS-Identifier = "a22aa8d26c65"
(4) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(4) NAS-Port-Type = Wireless-802.11
(4) Service-Type = Framed-User
(4) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(4) Connect-Info = "CONNECT 0Mbps 802.11b"
(4) Acct-Session-Id = "6A0D6C94095D2E0A"
(4) WLAN-Pairwise-Cipher = 1027076
(4) WLAN-Group-Cipher = 1027076
(4) WLAN-AKM-Suite = 1027073
(4) Framed-MTU = 1400
(4) EAP-Message =
0x028f008819800000007e16030300461000004241048fdc417fe1d3fcecaffdcc000a5
1421f8063c74ef6fd3035691c0eb23b7727f1920fcb300efa8b867394dc98d5cea84698
61c3ef699a8b80721e9a487b2dbd8814030300010116030300280000000000000000fd3
e43ecc7209d9245ae40f8cc7d87f77abaa962fd01d56cf55fe9070e075946
(4) State = 0xacb59afcaf3a83f3c10471c5771ffc72
(4) Message-Authenticator = 0x44a410d1eba2411512f46bed2a722cea
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 143 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb//sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xacb59afcaf3a83f3
(4) eap: Finished EAP session with state 0xacb59afcaf3a83f3
(4) eap: Previous EAP request found for state 0xacb59afcaf3a83f3,
released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2 [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2 [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: TLS - Connection Established
(4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256"
(4) eap_peap: TLS-Session-Version = "TLS 1.2"
(4) eap_peap: TLS - got 51 bytes of data
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 144 length 57
(4) eap: EAP session adding &reply:State = 0xacb59afca82583f3
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb//sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256"
(4) TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 112 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(4) EAP-Message =
0x0190003919001403030001011603030028d7bfce4f731f8923b50d6ba0a6ff17eac0f
e578415834ef87798c898e5d1b5230abb0fc49392cd52
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xacb59afca82583f3c10471c5771ffc72
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 113 from 192.168.251.51:39578 to
172.16.1.104:1812 length 205
(5) User-Name = "fimi"
(5) NAS-Identifier = "a22aa8d26c65"
(5) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(5) NAS-Port-Type = Wireless-802.11
(5) Service-Type = Framed-User
(5) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(5) Connect-Info = "CONNECT 0Mbps 802.11b"
(5) Acct-Session-Id = "6A0D6C94095D2E0A"
(5) WLAN-Pairwise-Cipher = 1027076
(5) WLAN-Group-Cipher = 1027076
(5) WLAN-AKM-Suite = 1027073
(5) Framed-MTU = 1400
(5) EAP-Message = 0x029000061900
(5) State = 0xacb59afca82583f3c10471c5771ffc72
(5) Message-Authenticator = 0xf6d9bebdbb69b67dc8d7eb81d451fb22
(5) Restoring &session-state
(5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-
SHA256"
(5) &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 144 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb//sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0xacb59afca82583f3
(5) eap: Finished EAP session with state 0xacb59afca82583f3
(5) eap: Previous EAP request found for state 0xacb59afca82583f3,
released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 145 length 40
(5) eap: EAP session adding &reply:State = 0xacb59afca92483f3
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb//sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256"
(5) TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 113 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(5) EAP-Message =
0x019100281900170303001dd7bfce4f731f8924bd8d9b93f79b404ccc3552c051b5803
0a6668f437a
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xacb59afca92483f3c10471c5771ffc72
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 114 from 192.168.251.51:39578 to
172.16.1.104:1812 length 239
(6) User-Name = "fimi"
(6) NAS-Identifier = "a22aa8d26c65"
(6) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(6) Connect-Info = "CONNECT 0Mbps 802.11b"
(6) Acct-Session-Id = "6A0D6C94095D2E0A"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027073
(6) Framed-MTU = 1400
(6) EAP-Message =
0x029100281900170303001d00000000000000016cef8464a32987af1dd82e0082a1aa1
d2885a73a67
(6) State = 0xacb59afca92483f3c10471c5771ffc72
(6) Message-Authenticator = 0x1895937a755c97428d05e1a5719571f7
(6) Restoring &session-state
(6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-
SHA256"
(6) &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 145 length 40
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb//sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0xacb59afca92483f3
(6) eap: Finished EAP session with state 0xacb59afca92483f3
(6) eap: Previous EAP request found for state 0xacb59afca92483f3,
released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - fimi
(6) eap_peap: Got inner identity 'fimi'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x029100090166696d69
(6) eap_peap: Setting User-Name to fimi
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x029100090166696d69
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "fimi"
(6) eap_peap: NAS-Identifier = "a22aa8d26c65"
(6) eap_peap: Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(6) eap_peap: NAS-Port-Type = Wireless-802.11
(6) eap_peap: Service-Type = Framed-User
(6) eap_peap: Calling-Station-Id = "F4-60-E2-B3-96-5C"
(6) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11b"
(6) eap_peap: Acct-Session-Id = "6A0D6C94095D2E0A"
(6) eap_peap: WLAN-Pairwise-Cipher = 1027076
(6) eap_peap: WLAN-Group-Cipher = 1027076
(6) eap_peap: WLAN-AKM-Suite = 1027073
(6) eap_peap: Framed-MTU = 1400
(6) eap_peap: Event-Timestamp = "Feb 16 2021 14:31:51 CET"
(6) eap_peap: NAS-IP-Address = 192.168.251.51
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x029100090166696d69
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "fimi"
(6) NAS-Identifier = "a22aa8d26c65"
(6) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(6) Connect-Info = "CONNECT 0Mbps 802.11b"
(6) Acct-Session-Id = "6A0D6C94095D2E0A"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027073
(6) Framed-MTU = 1400
(6) Event-Timestamp = "Feb 16 2021 14:31:51 CET"
(6) NAS-IP-Address = 192.168.251.51
(6) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file /etc/raddb//sites-
enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 145 length 9
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb//sites-enabled/inner-
tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 146 length 43
(6) eap: EAP session adding &reply:State = 0xce54cccdcec6d606
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message =
0x0192002b1a01920026108a40c95e71e0350f2a078d5cbc650f6766726565726164697
5732d332e302e3231
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xce54cccdcec6d6066e64469f1bba9a6c
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message =
0x0192002b1a01920026108a40c95e71e0350f2a078d5cbc650f6766726565726164697
5732d332e302e3231
(6) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(6) eap_peap: State = 0xce54cccdcec6d6066e64469f1bba9a6c
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message =
0x0192002b1a01920026108a40c95e71e0350f2a078d5cbc650f6766726565726164697
5732d332e302e3231
(6) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(6) eap_peap: State = 0xce54cccdcec6d6066e64469f1bba9a6c
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 146 length 74
(6) eap: EAP session adding &reply:State = 0xacb59afcaa2783f3
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb//sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256"
(6) TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 114 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(6) EAP-Message =
0x0192004a1900170303003fd7bfce4f731f89250b2de5e4317f7ea66feafcc910fc583
31b209ae3b2f1645748cb849feea90736c1b3dd2fd65985670cf8b0500ebf9f65f4c2cd
9c7666bb
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xacb59afcaa2783f3c10471c5771ffc72
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 115 from 192.168.251.51:39578 to
172.16.1.104:1812 length 293
(7) User-Name = "fimi"
(7) NAS-Identifier = "a22aa8d26c65"
(7) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(7) NAS-Port-Type = Wireless-802.11
(7) Service-Type = Framed-User
(7) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(7) Connect-Info = "CONNECT 0Mbps 802.11b"
(7) Acct-Session-Id = "6A0D6C94095D2E0A"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027073
(7) Framed-MTU = 1400
(7) EAP-Message =
0x0292005e190017030300530000000000000002c33e469fe868a89587b88a78a823d95
ce11565b6bae206f2ab459b4db443f4f19749b732f97a0bb868d5fa960b4195aea1b707
773f8080e9444b35bccc989c93a662e56f8036a8077d5eb9
(7) State = 0xacb59afcaa2783f3c10471c5771ffc72
(7) Message-Authenticator = 0xb9aba9255bb19133efecdb6c7e8efc39
(7) Restoring &session-state
(7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-
SHA256"
(7) &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 146 length 94
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb//sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0xce54cccdcec6d606
(7) eap: Finished EAP session with state 0xacb59afcaa2783f3
(7) eap: Previous EAP request found for state 0xacb59afcaa2783f3,
released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message =
0x0292003f1a0292003a31d459203b242256b2671bad6cb9aad4d100000000000000000
2e154a7254fcd1553ac37739e9c987d0efa389627bcf2f30066696d69
(7) eap_peap: Setting User-Name to fimi
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message =
0x0292003f1a0292003a31d459203b242256b2671bad6cb9aad4d100000000000000000
2e154a7254fcd1553ac37739e9c987d0efa389627bcf2f30066696d69
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "fimi"
(7) eap_peap: State = 0xce54cccdcec6d6066e64469f1bba9a6c
(7) eap_peap: NAS-Identifier = "a22aa8d26c65"
(7) eap_peap: Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(7) eap_peap: NAS-Port-Type = Wireless-802.11
(7) eap_peap: Service-Type = Framed-User
(7) eap_peap: Calling-Station-Id = "F4-60-E2-B3-96-5C"
(7) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11b"
(7) eap_peap: Acct-Session-Id = "6A0D6C94095D2E0A"
(7) eap_peap: WLAN-Pairwise-Cipher = 1027076
(7) eap_peap: WLAN-Group-Cipher = 1027076
(7) eap_peap: WLAN-AKM-Suite = 1027073
(7) eap_peap: Framed-MTU = 1400
(7) eap_peap: Event-Timestamp = "Feb 16 2021 14:31:51 CET"
(7) eap_peap: NAS-IP-Address = 192.168.251.51
(7) Virtual server inner-tunnel received request
(7) EAP-Message =
0x0292003f1a0292003a31d459203b242256b2671bad6cb9aad4d100000000000000000
2e154a7254fcd1553ac37739e9c987d0efa389627bcf2f30066696d69
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "fimi"
(7) State = 0xce54cccdcec6d6066e64469f1bba9a6c
(7) NAS-Identifier = "a22aa8d26c65"
(7) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(7) NAS-Port-Type = Wireless-802.11
(7) Service-Type = Framed-User
(7) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(7) Connect-Info = "CONNECT 0Mbps 802.11b"
(7) Acct-Session-Id = "6A0D6C94095D2E0A"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027073
(7) Framed-MTU = 1400
(7) Event-Timestamp = "Feb 16 2021 14:31:51 CET"
(7) NAS-IP-Address = 192.168.251.51
(7) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/raddb//sites-
enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 146 length 63
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(7) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap: --> (cn=fimi)
(7) ldap: Performing search in "o=HTBL" with filter "(cn=fimi)", scope
"sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN "cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL"
(7) ldap: Added eDirectory password
(7) ldap: Binding as user for eDirectory authorization checks
(7) ldap: Waiting for bind result...
(7) ldap: Bind successful
(7) ldap: Bind as user 'cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL' was
successful
(7) ldap: Processing user attributes
(7) ldap: reply:Class := 0x54657374
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (ldap): Connecting to ldaps://172.16.1.33:636
TLS certificate verification: Error, unable to get issuer certificate
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) [ldap] = updated
(7) if ((ok || updated) && User-Password) {
(7) if ((ok || updated) && User-Password) -> FALSE
(7) [expiration] = noop
(7) [logintime] = noop
(7) pap: WARNING: Auth-Type already set. Not setting to PAP
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb//sites-enabled/inner-
tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0xce54cccdcec6d606
(7) eap: Finished EAP session with state 0xce54cccdcec6d606
(7) eap: Previous EAP request found for state 0xce54cccdcec6d606,
released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file /etc/raddb//sites-
enabled/inner-tunnel
(7) eap_mschapv2: authenticate {
(7) mschap: Found Cleartext-Password, hashing to create NT-Password
(7) mschap: Creating challenge hash with username: fimi
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Adding MS-CHAPv2 MPPE keys
(7) eap_mschapv2: [mschap] = ok
(7) eap_mschapv2: } # authenticate = ok
(7) eap_mschapv2: MSCHAP Success
(7) eap: Sending EAP Request (code 1) ID 147 length 51
(7) eap: EAP session adding &reply:State = 0xce54cccdcfc7d606
(7) [eap] = handled
(7) } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) Class := 0x54657374
(7) EAP-Message =
0x019300331a0392002e533d37344538383341333831323330303433453231423444393
831443846304645303534393332434436
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xce54cccdcfc7d6066e64469f1bba9a6c
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap: Class := 0x54657374
(7) eap_peap: EAP-Message =
0x019300331a0392002e533d37344538383341333831323330303433453231423444393
831443846304645303534393332434436
(7) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(7) eap_peap: State = 0xce54cccdcfc7d6066e64469f1bba9a6c
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap: Class := 0x54657374
(7) eap_peap: EAP-Message =
0x019300331a0392002e533d37344538383341333831323330303433453231423444393
831443846304645303534393332434436
(7) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(7) eap_peap: State = 0xce54cccdcfc7d6066e64469f1bba9a6c
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 147 length 82
(7) eap: EAP session adding &reply:State = 0xacb59afcab2683f3
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/raddb//sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256"
(7) TLS-Session-Version = "TLS 1.2"
(7) Sent Access-Challenge Id 115 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(7) EAP-Message =
0x0193005219001703030047d7bfce4f731f8926d0eb5fb2fb64d352a28529a911dc1f1
6f04df90f49ca7b5d558c6aaa9551b79d2aefe09cabc8d6dab3f7ddfd3e1975c56b057b
a096a0d20f24ffcf1b0f8b39
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xacb59afcab2683f3c10471c5771ffc72
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 116 from 192.168.251.51:39578 to
172.16.1.104:1812 length 236
(8) User-Name = "fimi"
(8) NAS-Identifier = "a22aa8d26c65"
(8) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(8) NAS-Port-Type = Wireless-802.11
(8) Service-Type = Framed-User
(8) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(8) Connect-Info = "CONNECT 0Mbps 802.11b"
(8) Acct-Session-Id = "6A0D6C94095D2E0A"
(8) WLAN-Pairwise-Cipher = 1027076
(8) WLAN-Group-Cipher = 1027076
(8) WLAN-AKM-Suite = 1027073
(8) Framed-MTU = 1400
(8) EAP-Message =
0x029300251900170303001a0000000000000003df886c4c4c30475c1e9f179b8e75396
288fa
(8) State = 0xacb59afcab2683f3c10471c5771ffc72
(8) Message-Authenticator = 0xc30bd0a5031ba8aa96fa0c1beae66554
(8) Restoring &session-state
(8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-
SHA256"
(8) &session-state:TLS-Session-Version = "TLS 1.2"
(8) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 147 length 37
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb//sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0xce54cccdcfc7d606
(8) eap: Finished EAP session with state 0xacb59afcab2683f3
(8) eap: Previous EAP request found for state 0xacb59afcab2683f3,
released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x029300061a03
(8) eap_peap: Setting User-Name to fimi
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x029300061a03
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "fimi"
(8) eap_peap: State = 0xce54cccdcfc7d6066e64469f1bba9a6c
(8) eap_peap: NAS-Identifier = "a22aa8d26c65"
(8) eap_peap: Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(8) eap_peap: NAS-Port-Type = Wireless-802.11
(8) eap_peap: Service-Type = Framed-User
(8) eap_peap: Calling-Station-Id = "F4-60-E2-B3-96-5C"
(8) eap_peap: Connect-Info = "CONNECT 0Mbps 802.11b"
(8) eap_peap: Acct-Session-Id = "6A0D6C94095D2E0A"
(8) eap_peap: WLAN-Pairwise-Cipher = 1027076
(8) eap_peap: WLAN-Group-Cipher = 1027076
(8) eap_peap: WLAN-AKM-Suite = 1027073
(8) eap_peap: Framed-MTU = 1400
(8) eap_peap: Event-Timestamp = "Feb 16 2021 14:31:51 CET"
(8) eap_peap: NAS-IP-Address = 192.168.251.51
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x029300061a03
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "fimi"
(8) State = 0xce54cccdcfc7d6066e64469f1bba9a6c
(8) NAS-Identifier = "a22aa8d26c65"
(8) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(8) NAS-Port-Type = Wireless-802.11
(8) Service-Type = Framed-User
(8) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(8) Connect-Info = "CONNECT 0Mbps 802.11b"
(8) Acct-Session-Id = "6A0D6C94095D2E0A"
(8) WLAN-Pairwise-Cipher = 1027076
(8) WLAN-Group-Cipher = 1027076
(8) WLAN-AKM-Suite = 1027073
(8) Framed-MTU = 1400
(8) Event-Timestamp = "Feb 16 2021 14:31:51 CET"
(8) NAS-IP-Address = 192.168.251.51
(8) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(8) server inner-tunnel {
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/raddb//sites-
enabled/inner-tunnel
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [chap] = noop
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) &Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 147 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(8) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(8) ldap: --> (cn=fimi)
(8) ldap: Performing search in "o=HTBL" with filter "(cn=fimi)", scope
"sub"
(8) ldap: Waiting for search result...
(8) ldap: User object found at DN "cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL"
(8) ldap: Added eDirectory password
(8) ldap: Binding as user for eDirectory authorization checks
(8) ldap: Waiting for bind result...
(8) ldap: Bind successful
(8) ldap: Bind as user 'cn=FIMI,ou=TEACHERS,ou=EL,o=HTBL' was
successful
(8) ldap: Processing user attributes
(8) ldap: reply:Class := 0x54657374
rlm_ldap (ldap): Released connection (1)
(8) [ldap] = updated
(8) if ((ok || updated) && User-Password) {
(8) if ((ok || updated) && User-Password) -> FALSE
(8) [expiration] = noop
(8) [logintime] = noop
(8) pap: WARNING: Auth-Type already set. Not setting to PAP
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb//sites-enabled/inner-
tunnel
(8) authenticate {
(8) eap: Expiring EAP session with state 0xce54cccdcfc7d606
(8) eap: Finished EAP session with state 0xce54cccdcfc7d606
(8) eap: Previous EAP request found for state 0xce54cccdcfc7d606,
released from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap: Sending EAP Success (code 3) ID 147 length 4
(8) eap: Freeing handler
(8) [eap] = ok
(8) } # authenticate = ok
(8) # Executing section post-auth from file /etc/raddb//sites-
enabled/inner-tunnel
(8) post-auth {
(8) update outer.session-state {
(8) User-Name := &User-Name -> 'fimi'
(8) } # update outer.session-state = noop
(8) if (0) {
(8) if (0) -> FALSE
(8) } # post-auth = noop
(8) Login OK: [fimi] (from client private-network-1 port 0 cli F4-60-
E2-B3-96-5C via TLS tunnel)
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) Class := 0x54657374
(8) MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) MS-MPPE-Send-Key = 0x10c1a0afdb990b0c89cbafea1fb5a023
(8) MS-MPPE-Recv-Key = 0x945a04e47cdc6cc2855e4671b019dac8
(8) EAP-Message = 0x03930004
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) User-Name = "fimi"
(8) eap_peap: Got tunneled reply code 2
(8) eap_peap: Class := 0x54657374
(8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap: MS-MPPE-Send-Key = 0x10c1a0afdb990b0c89cbafea1fb5a023
(8) eap_peap: MS-MPPE-Recv-Key = 0x945a04e47cdc6cc2855e4671b019dac8
(8) eap_peap: EAP-Message = 0x03930004
(8) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(8) eap_peap: User-Name = "fimi"
(8) eap_peap: Got tunneled reply RADIUS code 2
(8) eap_peap: Class := 0x54657374
(8) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap: MS-MPPE-Send-Key = 0x10c1a0afdb990b0c89cbafea1fb5a023
(8) eap_peap: MS-MPPE-Recv-Key = 0x945a04e47cdc6cc2855e4671b019dac8
(8) eap_peap: EAP-Message = 0x03930004
(8) eap_peap: Message-Authenticator =
0x00000000000000000000000000000000
(8) eap_peap: User-Name = "fimi"
(8) eap_peap: Tunneled authentication was successful
(8) eap_peap: SUCCESS
(8) eap_peap: Saving tunneled attributes for later
(8) eap: Sending EAP Request (code 1) ID 148 length 46
(8) eap: EAP session adding &reply:State = 0xacb59afca42183f3
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/raddb//sites-enabled/default
(8) Challenge { ... } # empty sub-section is ignored
(8) session-state: Saving cached attributes
(8) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-SHA256"
(8) TLS-Session-Version = "TLS 1.2"
(8) User-Name := "fimi"
(8) Sent Access-Challenge Id 116 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(8) EAP-Message =
0x0194002e19001703030023d7bfce4f731f8927e59eccb9a0df53bdd33beb426543316
13c93d58c9b3cb1a370fd58
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xacb59afca42183f3c10471c5771ffc72
(8) Finished request
Waking up in 4.8 seconds.
(9) Received Access-Request Id 117 from 192.168.251.51:39578 to
172.16.1.104:1812 length 245
(9) User-Name = "fimi"
(9) NAS-Identifier = "a22aa8d26c65"
(9) Called-Station-Id = "A2-2A-A8-D2-6C-65:8021x"
(9) NAS-Port-Type = Wireless-802.11
(9) Service-Type = Framed-User
(9) Calling-Station-Id = "F4-60-E2-B3-96-5C"
(9) Connect-Info = "CONNECT 0Mbps 802.11b"
(9) Acct-Session-Id = "6A0D6C94095D2E0A"
(9) WLAN-Pairwise-Cipher = 1027076
(9) WLAN-Group-Cipher = 1027076
(9) WLAN-AKM-Suite = 1027073
(9) Framed-MTU = 1400
(9) EAP-Message =
0x0294002e1900170303002300000000000000049cbc0856d443a17c57cf0e9696e0be8
29f55af83884de32f3d1fed
(9) State = 0xacb59afca42183f3c10471c5771ffc72
(9) Message-Authenticator = 0xbbafaf4a03ca8cd3833cd32b4090599f
(9) Restoring &session-state
(9) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES128-GCM-
SHA256"
(9) &session-state:TLS-Session-Version = "TLS 1.2"
(9) &session-state:User-Name := "fimi"
(9) # Executing section authorize from file /etc/raddb//sites-
enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
{
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "fimi", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 148 length 46
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/raddb//sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0xacb59afca42183f3
(9) eap: Finished EAP session with state 0xacb59afca42183f3
(9) eap: Previous EAP request found for state 0xacb59afca42183f3,
released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv success
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: Success
(9) eap_peap: Using saved attributes from the original Access-Accept
(9) eap_peap: Class := 0x54657374
(9) eap_peap: User-Name = "fimi"
(9) eap: Sending EAP Success (code 3) ID 148 length 4
(9) eap: Freeing handler
(9) [eap] = ok
(9) } # authenticate = ok
(9) # Executing section post-auth from file /etc/raddb//sites-
enabled/default
(9) post-auth {
(9) detail: EXPAND /var/log/radius/radacct/detail-%{Packet-Src-IP-
Address}-%Y%m%d
(9) detail: --> /var/log/radius/radacct/detail-192.168.251.51-
20210216
(9) detail: /var/log/radius/radacct/detail-%{Packet-Src-IP-Address}-
%Y%m%d expands to /var/log/radius/radacct/detail-192.168.251.51-
20210216
(9) detail: EXPAND %t
(9) detail: --> Tue Feb 16 14:31:51 2021
(9) [detail] = ok
(9) if (session-state:User-Name && reply:User-Name && request:User-
Name && (reply:User-Name == request:User-Name)) {
(9) if (session-state:User-Name && reply:User-Name && request:User-
Name && (reply:User-Name == request:User-Name)) -> TRUE
(9) if (session-state:User-Name && reply:User-Name && request:User-
Name && (reply:User-Name == request:User-Name)) {
(9) update reply {
(9) &User-Name !* ANY
(9) } # update reply = noop
(9) } # if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) = noop
(9) update {
(9) &reply::TLS-Session-Cipher-Suite += &session-state:TLS-
Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES128-GCM-SHA256'
(9) &reply::TLS-Session-Version += &session-state:TLS-Session-
Version[*] -> 'TLS 1.2'
(9) &reply::User-Name += &session-state:User-Name[*] -> 'fimi'
(9) } # update = noop
(9) [exec] = noop
(9) } # post-auth = ok
(9) Login OK: [fimi] (from client private-network-1 port 0 cli F4-60-
E2-B3-96-5C)
(9) Sent Access-Accept Id 117 from 172.16.1.104:1812 to
192.168.251.51:39578 length 0
(9) Class := 0x54657374
(9) MS-MPPE-Recv-Key =
0xf050c53e55a61c968578e1eb912fb311a88ac83aa9c8da1b150215372df7e8dd
(9) MS-MPPE-Send-Key =
0x44486a1a39cd12bc26a4aa7af8ba5ab15af6d50c0761d5f871e30a0a26319915
(9) EAP-Message = 0x03940004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name += "fimi"
(9) Finished request
Waking up in 4.8 seconds.
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Renaming
/var/log/radius/radacct/detail-192.168.251.51-20210216 ->
/var/log/radius/radacct/detail.work
detail (/var/log/radius/radacct/detail-*): Read packet from
/var/log/radius/radacct/detail.work
Packet-Type = Access-Accept
Class = 0x54657374
User-Name = "fimi"
MS-MPPE-Recv-Key =
0xf050c53e55a61c968578e1eb912fb311a88ac83aa9c8da1b150215372df7e8dd
MS-MPPE-Send-Key =
0x44486a1a39cd12bc26a4aa7af8ba5ab15af6d50c0761d5f871e30a0a26319915
EAP-MSK =
0xf050c53e55a61c968578e1eb912fb311a88ac83aa9c8da1b150215372df7e8dd44486
a1a39cd12bc26a4aa7af8ba5ab15af6d50c0761d5f871e30a0a26319915
EAP-EMSK =
0x8e69ff7772e986232fe655bd169495f41d41a92fe5d60073c08629f8cc9a7829381a2
9a5277fbce20a14a70dadd25244e7f53ab509635c741374cd23769d9fe6
EAP-Session-Id =
0x1963c73063457cfb114c1273ccdcd419324e47cc9d731c536da4118f5ca68b1177a6c
97603f1cc359df7d25c0b12e85f72f42fbd5b6cc194d7f4d4eb950ef62b3b
EAP-Message = 0x03940004
Message-Authenticator = 0x00000000000000000000000000000000
Packet-Original-Timestamp = "Feb 16 2021 14:31:51 CET"
Packet-Transmit-Counter = 1
Waking up in 3.9 seconds.
detail (/var/log/radius/radacct/detail-*): Unlinking
/var/log/radius/radacct/detail.work
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 0.757665 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 0.917765 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 0.913522 sec
detail (/var/log/radius/radacct/detail-*): Polling for detail file
detail (/var/log/radius/radacct/detail-*): Detail listener state
unopened waiting 1.103471 sec
(0) Cleaning up request packet ID 108 with timestamp +8
(1) Cleaning up request packet ID 109 with timestamp +8
(2) Cleaning up request packet ID 110 with timestamp +8
(3) Cleaning up request packet ID 111 with timestamp +8
(4) Cleaning up request packet ID 112 with timestamp +8
(5) Cleaning up request packet ID 113 with timestamp +8
(6) Cleaning up request packet ID 114 with timestamp +8
(7) Cleaning up request packet ID 115 with timestamp +8
(8) Cleaning up request packet ID 116 with timestamp +8
(9) Cleaning up request packet ID 117 with timestamp +8
Ready to process requests
Have a nice day,
Mike
More information about the Freeradius-Users
mailing list