EAP-TLS host certificates
Vieri Di Paola
vieridipaola at gmail.com
Thu Jan 28 12:51:54 CET 2021
I fixed the second part of my previous post where I was using the
bootstrapped certificates. Now the freeradius service starts up fine,
but I'm still getting the same behavior as when using my own CA to
"make" the server and client certificates. I imported the freeradius
custom CA cert and the client cert in the Windows 10 client.
The full freeradius log is shown below:
# radiusd -X
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/sql
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/attr_filter
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/canonicalization.original
including configuration file /etc/raddb/policy.d/filter.original
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/rfc7542
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/filter
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
user = "root"
group = "root"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var/lib"
logdir = "/var/log/radius"
run_dir = "/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var/lib"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/run/radiusd"
libdir = "/usr/lib64"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client SWITCH_DMZ_CPD {
ipaddr = 192.168.216.2
require_message_authenticator = no
secret = <<< secret >>>
shortname = "SWITCH_DMZ_CPD"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client SWITCH_DMZ_UH3A {
ipaddr = 192.168.216.3
require_message_authenticator = no
secret = <<< secret >>>
shortname = "SWITCH_DMZ_UH3A"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client SWITCH_DMZ_UH3B {
ipaddr = 192.168.216.4
require_message_authenticator = no
secret = <<< secret >>>
shortname = "SWITCH_DMZ_UH3B"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH3A1 {
ipaddr = 192.168.216.20
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH3A1"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH3A2 {
ipaddr = 192.168.216.21
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH3A2"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH3B3 {
ipaddr = 192.168.216.22
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH3B3"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH3B4 {
ipaddr = 192.168.216.23
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH3B4"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH4A1 {
ipaddr = 192.168.216.24
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH4A1"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH4A2 {
ipaddr = 192.168.216.25
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH4A2"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH4B3 {
ipaddr = 192.168.216.26
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH4B3"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH4B4 {
ipaddr = 192.168.216.27
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH4B4"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH2A1 {
ipaddr = 192.168.216.28
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH2A1"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH2A2 {
ipaddr = 192.168.216.29
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH2A2"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH2B3 {
ipaddr = 192.168.216.30
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH2B3"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH2B4 {
ipaddr = 192.168.216.31
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH2B4"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client URG2-1 {
ipaddr = 192.168.216.32
require_message_authenticator = no
secret = <<< secret >>>
shortname = "URG2-1"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client URG2-2 {
ipaddr = 192.168.216.33
require_message_authenticator = no
secret = <<< secret >>>
shortname = "URG2-2"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client URG2-3 {
ipaddr = 192.168.216.35
require_message_authenticator = no
secret = <<< secret >>>
shortname = "URG2-3"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UCSI {
ipaddr = 192.168.216.34
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UCSI"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1452 {
ipaddr = 192.168.216.36
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1452"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client UH4B-3 {
ipaddr = 192.168.216.37
require_message_authenticator = no
secret = <<< secret >>>
shortname = "UH4B-3"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client PSQ-1 {
ipaddr = 192.168.216.38
require_message_authenticator = no
secret = <<< secret >>>
shortname = "PSQ-1"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1457 {
ipaddr = 192.168.216.39
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1457"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1458 {
ipaddr = 192.168.216.40
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1458"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1463 {
ipaddr = 192.168.216.41
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1463"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1948 {
ipaddr = 192.168.216.42
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1948"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1451 {
ipaddr = 192.168.216.43
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1451"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1455 {
ipaddr = 192.168.216.44
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1455"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D1993 {
ipaddr = 192.168.216.45
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D1993"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D2049 {
ipaddr = 192.168.216.46
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D2049"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client D2057 {
ipaddr = 192.168.216.47
require_message_authenticator = no
secret = <<< secret >>>
shortname = "D2057"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client DXXXXCEXLAB2 {
ipaddr = 192.168.216.48
require_message_authenticator = no
secret = <<< secret >>>
shortname = "DXXXXCEXLAB2"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = mschap
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_sql
# Loading module "sql" from file /etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_unixodbc"
server = "sqlserver"
port = 0
login = "rad_sql_user"
password = <<< secret >>>
radius_db = "Hdb"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = ""
default_user_profile = ""
client_query = "SELECT id,nasname,shortname,type,secret FROM nas"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
auto_escape = no
accounting {
reference = ".query"
type {
accounting-on {
}
accounting-off {
}
start {
}
interim-update {
}
stop {
}
}
}
post-auth {
reference = ".query"
}
}
rlm_sql (sql): Driver rlm_sql_unixodbc (module rlm_sql_unixodbc)
loaded and linked
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_dhcp
# Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
usersfile = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loading module "authorized_macs" from file /etc/raddb/mods-enabled/files
files authorized_macs {
key = "%{Calling-Station-ID}"
}
# Loading module "authorized_hosts" from file /etc/raddb/mods-enabled/files
files authorized_hosts {
usersfile = "/opt/radius/radius/authorized_hosts"
key = "%{1}"
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = yes
require_strong = yes
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}
--require-membership-of=HMAN.ORG\FHM --domain=DOMAIN"
ntlm_auth_timeout = 10
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
instantiate {
# Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql (sql): Attempting to connect to database "Hdb"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
}
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = "1.2"
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
name = "EAP-TLS"
max_entries = 255
persist_dir = "/var/log/radius/tlscache"
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
The configuration allows TLS 1.0 and/or TLS 1.1. We STRONGLY
recommned using only TLS 1.2 for security
Please set: min_tls_version = "1.2"
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "authorized_macs" from file
/etc/raddb/mods-enabled/files
# Instantiating module "authorized_hosts" from file
/etc/raddb/mods-enabled/files
reading pairlist file /opt/radius/radius/authorized_hosts
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:338
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 44000
Listening on proxy address :: port 48253
Ready to process requests
(0) Received Access-Request Id 26 from 192.168.216.36:40777 to
10.215.144.91:1812 length 225
(0) User-Name = "host/user at example.org"
(0) NAS-IP-Address = 192.168.216.36
(0) NAS-Identifier = "10:be:f5:c9:ce:90"
(0) NAS-Port = 0
(0) Called-Station-Id = "10-BE-F5-C9-CE-90:HMAN private access"
(0) Calling-Station-Id = "4C-1D-96-4E-48-0F"
(0) Framed-MTU = 1400
(0) NAS-Port-Type = Wireless-802.11
(0) Connect-Info = "CONNECT 0Mbps 802.11b"
(0) EAP-Message = 0x0212001a01686f73742f75736572406578616d706c652e6f7267
(0) Message-Authenticator = 0x9daba087eac39e70a2175b14a369fdc6
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) policy custom_split_username_nai {
(0) if (&User-Name && (&User-Name =~ /^(\w+)@(.*)$/)) {
(0) if (&User-Name && (&User-Name =~ /^(\w+)@(.*)$/)) -> FALSE
(0) else {
(0) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) {
(0) if (&User-Name && (&User-Name =~ /^(.*)\\(\w+)$/)) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # else = noop
(0) } # policy custom_split_username_nai = noop
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = noop
(0) } # policy filter_username = noop
(0) [preprocess] = ok
(0) policy custom_filter_default {
(0) policy rewrite_calling_station_id {
(0) if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(0) if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
-> TRUE
(0) if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
{
(0) update request {
(0) EXPAND %{toupper:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
(0) --> 4C-1D-96-4E-48-0F
(0) &Calling-Station-Id := 4C-1D-96-4E-48-0F
(0) } # update request = noop
(0) [updated] = updated
(0) } # if (&Calling-Station-Id && (&Calling-Station-Id =~
/^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i))
= updated
(0) ... skipping else: Preceding "if" was taken
(0) } # policy rewrite_calling_station_id = updated
(0) if ( ("%{sql:SELECT count(IT_computers.Mac) FROM
IT_computers INNER JOIN IT_devices ON IT_computers.HostName =
IT_devices.E_Name WHERE ( IT_devices.NotUsed = 0 AND IT_devices.Leave
= 0 AND ( IT_computers.Mac = '%{Calling-Station-ID}' OR
IT_computers.Mac = '%{Calling-Station-ID};' OR IT_computers.Mac LIKE
'%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac)
FROM IT_devices WHERE ( NotUsed = 0 AND Leave = 0 AND ( Mac =
'%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE
'%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) {
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql (sql): Reserved connection (1)
rlm_sql (sql): Released connection (1)
rlm_sql (sql): Reserved connection (2)
rlm_sql (sql): Released connection (2)
rlm_sql (sql): Reserved connection (3)
(0) Executing select query: SELECT count(IT_computers.Mac) FROM
IT_computers INNER JOIN IT_devices ON IT_computers.HostName =
IT_devices.E_Name WHERE ( IT_devices.NotUsed = 0 AND IT_devices.Leave
= 0 AND ( IT_computers.Mac = '4C-1D-96-4E-48-0F' OR IT_computers.Mac =
'4C-1D-96-4E-48-0F;' OR IT_computers.Mac LIKE '%;4C-1D-96-4E-48-0F%' )
)
rlm_sql (sql): Released connection (3)
(0) EXPAND %{sql:SELECT count(IT_computers.Mac) FROM
IT_computers INNER JOIN IT_devices ON IT_computers.HostName =
IT_devices.E_Name WHERE ( IT_devices.NotUsed = 0 AND IT_devices.Leave
= 0 AND ( IT_computers.Mac = '%{Calling-Station-ID}' OR
IT_computers.Mac = '%{Calling-Station-ID};' OR IT_computers.Mac LIKE
'%%;%{Calling-Station-ID}%%' ) )}
(0) --> 0
rlm_sql (sql): Reserved connection (4)
rlm_sql (sql): Released connection (4)
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Reserved connection (5)
rlm_sql (sql): Released connection (5)
rlm_sql (sql): Reserved connection (1)
(0) Executing select query: SELECT count(Mac) FROM IT_devices
WHERE ( NotUsed = 0 AND Leave = 0 AND ( Mac = '4C-1D-96-4E-48-0F' OR
Mac = '4C-1D-96-4E-48-0F;' OR Mac LIKE '%;4C-1D-96-4E-48-0F%' ) )
rlm_sql (sql): Released connection (1)
(0) EXPAND %{sql:SELECT count(Mac) FROM IT_devices WHERE (
NotUsed = 0 AND Leave = 0 AND ( Mac = '%{Calling-Station-ID}' OR Mac =
'%{Calling-Station-ID};' OR Mac LIKE '%%;%{Calling-Station-ID}%%' ) )}
(0) --> 1
(0) if ( ("%{sql:SELECT count(IT_computers.Mac) FROM
IT_computers INNER JOIN IT_devices ON IT_computers.HostName =
IT_devices.E_Name WHERE ( IT_devices.NotUsed = 0 AND IT_devices.Leave
= 0 AND ( IT_computers.Mac = '%{Calling-Station-ID}' OR
IT_computers.Mac = '%{Calling-Station-ID};' OR IT_computers.Mac LIKE
'%%;%{Calling-Station-ID}%%' ) )}" <= 0) && ("%{sql:SELECT count(Mac)
FROM IT_devices WHERE ( NotUsed = 0 AND Leave = 0 AND ( Mac =
'%{Calling-Station-ID}' OR Mac = '%{Calling-Station-ID};' OR Mac LIKE
'%%;%{Calling-Station-ID}%%' ) )}" <= 0) ) || (!EAP-Message) -> FALSE
(0) else {
(0) if ( (&User-Name) && (&User-Name =~ /^host\/(\w+)(\.\w+)*$/) ) {
(0) if ( (&User-Name) && (&User-Name =~
/^host\/(\w+)(\.\w+)*$/) ) -> FALSE
(0) else {
(0) eap: Peer sent EAP Response (code 2) ID 18 length 26
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
the rest of authorize
(0) [eap] = ok
(0) } # else = ok
(0) } # else = ok
(0) } # policy custom_filter_default = updated
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "example.org" for User-Name =
"host/user at example.org"
(0) suffix: No such realm "example.org"
(0) [suffix] = noop
(0) ntdomain: Checking for prefix before "\"
(0) ntdomain: No '\' in User-Name = "host/user at example.org", looking
up realm NULL
(0) ntdomain: No such realm "NULL"
(0) [ntdomain] = noop
(0) [expiration] = noop
(0) [logintime] = noop
(0) } # authorize = updated
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: Initiating new TLS session
(0) eap_tls: Setting verify mode to require certificate from client
(0) eap_tls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 19 length 6
(0) eap: EAP session adding &reply:State = 0x92908c3292838136
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 26 from 10.215.144.91:1812 to
192.168.216.36:40777 length 0
(0) EAP-Message = 0x011300060d20
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x92908c329283813699c2b3a02bbc742f
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 26 with timestamp +13
Ready to process requests
I know this is because the client refuses to continue, but I don't
know what else to look for now.
When you import the client certificate in windows 10 does it matter if
it's in the computer account or the user account?
Any thoughts?
On Tue, Jan 26, 2021 at 2:30 PM Vieri Di Paola <vieridipaola at gmail.com> wrote:
>
> Hi,
>
> Several years ago when Windows XP clients were around in my
> organization I had successfully configured freeradius with EAP-TLS and
> host certificates.
>
> Now, most of my clients are Windows 10 and just a few Windows 7. They
> can access with PEAP mschap-v2 via WiFi.
>
> I am now trying to configure WiFi access with EAP-TLS and host certificates.
>
> Please bear with me as I haven't handled freeradius for years now, and
> I'm a bit rusty.
>
> I already have a custom Signing Authority (ca.pem).
> So, within /etc/raddb/certs I ran the following after adjusting the
> corresponding *.cnf files:
>
> # make server.pem
> # make server.csr
> # make inner-server.pem
> # make client.pem
>
> The Windows 10 client has imported both the CA in trusted roots and
> the client certificate in the "local computer" store. I chose the
> common name "PC2036" (see below).
> The wireless connection is set up with a "smart card or other
> certificate" (computer account).
>
> When I try to connect I see this in the radiusd log (please let me
> know if you need the full log):
>
> (132) Received Access-Request Id 67 from 192.168.216.36:58425 to
> 10.215.144.91:1812 length 209
> (132) User-Name = "host/PC2036"
> (132) NAS-IP-Address = 192.168.216.36
> (132) NAS-Identifier = "10:be:f5:c9:ce:90"
> (132) NAS-Port = 0
> (132) Called-Station-Id = "10-BE-F5-C9-CE-98:HMprv"
> (132) Calling-Station-Id = "4C-1D-96-4E-48-0F"
> (132) Framed-MTU = 1400
> (132) NAS-Port-Type = Wireless-802.11
> (132) Connect-Info = "CONNECT 0Mbps 802.11b"
> (132) EAP-Message = 0x028a001201686f73742f484d414e32303336
> (132) Message-Authenticator = 0xc6775ce6e83151b7ecde4018fb87f5d8
> (132) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (132) authorize {
> [...]
> (132) ntdomain: Checking for prefix before "\"
> (132) ntdomain: No '\' in User-Name = "host/PC2036", looking up realm NULL
> (132) ntdomain: No such realm "NULL"
> (132) [ntdomain] = noop
> (132) [expiration] = noop
> (132) [logintime] = noop
> (132) } # authorize = updated
> (132) Found Auth-Type = eap
> (132) # Executing group from file /etc/raddb/sites-enabled/default
> (132) authenticate {
> (132) eap: Peer sent packet with method EAP Identity (1)
> (132) eap: Calling submodule eap_tls to process data
> (132) eap_tls: Initiating new TLS session
> (132) eap_tls: Setting verify mode to require certificate from client
> (132) eap_tls: [eaptls start] = request
> (132) eap: Sending EAP Request (code 1) ID 139 length 6
> (132) eap: EAP session adding &reply:State = 0x007a782400f175f1
> (132) [eap] = handled
> (132) } # authenticate = handled
> (132) Using Post-Auth-Type Challenge
> (132) # Executing group from file /etc/raddb/sites-enabled/default
> (132) Challenge { ... } # empty sub-section is ignored
> (132) Sent Access-Challenge Id 67 from 10.215.144.91:1812 to
> 192.168.216.36:58425 length 0
> (132) EAP-Message = 0x018b00060d20
> (132) Message-Authenticator = 0x00000000000000000000000000000000
> (132) State = 0x007a782400f175f114c01cbf42164dc9
> (132) Finished request
> Waking up in 4.9 seconds.
> (132) Cleaning up request packet ID 67 with timestamp +2318
> Ready to process requests
>
>
> I then read this:
> https://wiki.freeradius.org/guide/certificate-compatibility
>
> So I decided to replace the whole certificate directory just to make
> sure the test certs work.
>
> So I ran this:
>
> # ./bootstrap
> # make inner-server.pem
>
> However, when I run the server I get an error reading its certificate.
>
> # radiusd -X
> [...]
> tls: Failed reading private key file "/etc/raddb/certs/server.pem"
> tls: error:06065064:digital envelope routines:EVP_DecryptFinal_ex:bad decrypt
> tls: error:23077074:PKCS12 routines:PKCS12_pbe_crypt:pkcs12 cipherfinal error
> tls: error:2306A075:PKCS12 routines:PKCS12_item_decrypt_d2i:pkcs12 pbe
> crypt error
> tls: error:0907B00D:PEM routines:PEM_read_bio_PrivateKey:ASN1 lib
> tls: error:140B0009:SSL routines:SSL_CTX_use_PrivateKey_file:PEM lib
> rlm_eap_tls: Failed initializing SSL context
> rlm_eap (EAP): Failed to initialise rlm_eap_tls
> /etc/raddb/mods-enabled/eap[14]: Instantiation failed for module "eap"
>
> # ls -l /etc/raddb/certs/server.pem
> -rw-r----- 1 root radius 3588 Jun 12 2020 /etc/raddb/certs/server.pem
>
> freeradius v. 3.0.20
>
> I'm sure this is a silly mistake on my behalf.
>
> Any suggestions?
>
> Vieri
More information about the Freeradius-Users
mailing list