Help in configuring freeradius to support two server certificates in EAP-TLS
Hello Users
hellousers1987 at gmail.com
Thu Nov 11 15:13:40 CET 2021
Hi all,
I am new to freeradius. I need to configure the radius server to support
clients authenticating using two different certificate authorities.Already
existing server certificate is about to expire and the requirement is to
support both new and old certificates during the transition period.
The Freeradius version used is 3.0.20 and testing done in raspberry pi 3.
I found a similar query over
https://marc.info/?l=freeradius-users&m=118050256411524&w=2 and tried to
configure it as mentioned.
eap eap1 {
...
tls {
certificate = Cert1.pem
...
}
}
eap eap2 {
...
tls {
certificate = Cert2.pem
...
}
}
authenticate {
...
eap1
eap2
}
But in the authorize {} section, I could configure either eap1 or eap2. If
both are configured I am getting errors as below while authenticating.
(1) Found Auth-Type = eap1
(1) Found Auth-Type = eap2
"ERROR: Warning: Found 2 auth-types on request for user 'hellouser'"
Attaching the full log for reference.
So my doubts are
1) Do we need to mention explicitly in the user file which eap method to be
used as below ? Even I tried it, but it's not working. Can anyone help me
with this.
DEFAULT Called-Station-ID = "00112233445566:SSID1", Auth-Type := eap1
DEFAULT Called-Station-ID = "00112233445566:SSID2", Auth-Type := eap2
2) Also in my case, I won't be able to configure stations IDs as above.
Is there any way to configure radius server like it should try with eap1
first and if it fails then try with eap2. Can anyone please help
Thanks in advance.
Regards,
Jnx
-------------- next part --------------
root at RaspberryPi-Gateway:~# radiusd -d /nvram/certs/test/raddb -X
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /nvram/certs/test/raddb/dictionary
including configuration file /nvram/certs/test/raddb/radiusd.conf
including configuration file /nvram/certs/test/raddb/proxy.conf
including configuration file /nvram/certs/test/raddb/clients.conf
including files in directory /nvram/certs/test/raddb/mods-enabled/
including configuration file /nvram/certs/test/raddb/mods-enabled/detail.log
including configuration file /nvram/certs/test/raddb/mods-enabled/attr_filter
including configuration file /nvram/certs/test/raddb/mods-enabled/expiration
including configuration file /nvram/certs/test/raddb/mods-enabled/echo
including configuration file /nvram/certs/test/raddb/mods-enabled/preprocess
including configuration file /nvram/certs/test/raddb/mods-enabled/ntlm_auth
including configuration file /nvram/certs/test/raddb/mods-enabled/realm
including configuration file /nvram/certs/test/raddb/mods-enabled/replicate
including configuration file /nvram/certs/test/raddb/mods-enabled/utf8
including configuration file /nvram/certs/test/raddb/mods-enabled/unpack
including configuration file /nvram/certs/test/raddb/mods-enabled/cache_eap
including configuration file /nvram/certs/test/raddb/mods-enabled/pap
including configuration file /nvram/certs/test/raddb/mods-enabled/passwd
including configuration file /nvram/certs/test/raddb/mods-enabled/date
including configuration file /nvram/certs/test/raddb/mods-enabled/eap
including configuration file /nvram/certs/test/raddb/mods-enabled/unix
including configuration file /nvram/certs/test/raddb/mods-enabled/dynamic_clients
including configuration file /nvram/certs/test/raddb/mods-enabled/radutmp
including configuration file /nvram/certs/test/raddb/mods-enabled/digest
including configuration file /nvram/certs/test/raddb/mods-enabled/mschap
including configuration file /nvram/certs/test/raddb/mods-enabled/exec
including configuration file /nvram/certs/test/raddb/mods-enabled/soh
including configuration file /nvram/certs/test/raddb/mods-enabled/always
including configuration file /nvram/certs/test/raddb/mods-enabled/expr
including configuration file /nvram/certs/test/raddb/mods-enabled/sradutmp
including configuration file /nvram/certs/test/raddb/mods-enabled/logintime
including configuration file /nvram/certs/test/raddb/mods-enabled/detail
including configuration file /nvram/certs/test/raddb/mods-enabled/linelog
including configuration file /nvram/certs/test/raddb/mods-enabled/files
including configuration file /nvram/certs/test/raddb/mods-enabled/chap
including files in directory /nvram/certs/test/raddb/policy.d/
including configuration file /nvram/certs/test/raddb/policy.d/control
including configuration file /nvram/certs/test/raddb/policy.d/abfab-tr
including configuration file /nvram/certs/test/raddb/policy.d/cui
including configuration file /nvram/certs/test/raddb/policy.d/canonicalization
including configuration file /nvram/certs/test/raddb/policy.d/debug
including configuration file /nvram/certs/test/raddb/policy.d/rfc7542
including configuration file /nvram/certs/test/raddb/policy.d/eap
including configuration file /nvram/certs/test/raddb/policy.d/moonshot-targeted-ids
including configuration file /nvram/certs/test/raddb/policy.d/filter
including configuration file /nvram/certs/test/raddb/policy.d/dhcp
including configuration file /nvram/certs/test/raddb/policy.d/accounting
including configuration file /nvram/certs/test/raddb/policy.d/operator-name
including files in directory /nvram/certs/test/raddb/sites-enabled/
including configuration file /nvram/certs/test/raddb/sites-enabled/default
including configuration file /nvram/certs/test/raddb/sites-enabled/inner-tunnel
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client 0.0.0.0/0 {
require_message_authenticator = no
secret = <<< secret >>>
shortname = "RPI3_AP0"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 0.0.0.0/0. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap1
# Creating Auth-Type = eap2
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_detail
# Loading module "auth_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/nvram/certs/test/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/nvram/certs/test/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/nvram/certs/test/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/nvram/certs/test/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/nvram/certs/test/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /nvram/certs/test/raddb/mods-enabled/expiration
# Loaded module rlm_exec
# Loading module "echo" from file /nvram/certs/test/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /nvram/certs/test/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/nvram/certs/test/raddb/mods-config/preprocess/huntgroups"
hints = "/nvram/certs/test/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loading module "ntlm_auth" from file /nvram/certs/test/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /nvram/certs/test/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /nvram/certs/test/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /nvram/certs/test/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /nvram/certs/test/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /nvram/certs/test/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /nvram/certs/test/raddb/mods-enabled/replicate
# Loaded module rlm_utf8
# Loading module "utf8" from file /nvram/certs/test/raddb/mods-enabled/utf8
# Loaded module rlm_unpack
# Loading module "unpack" from file /nvram/certs/test/raddb/mods-enabled/unpack
# Loaded module rlm_cache
# Loading module "cache_eap" from file /nvram/certs/test/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /nvram/certs/test/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /nvram/certs/test/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_date
# Loading module "date" from file /nvram/certs/test/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /nvram/certs/test/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_eap
# Loading module "eap1" from file /nvram/certs/test/raddb/mods-enabled/eap
eap eap1 {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loading module "eap2" from file /nvram/certs/test/raddb/mods-enabled/eap
eap eap2 {
default_eap_type = "tls"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_unix
# Loading module "unix" from file /nvram/certs/test/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /nvram/certs/test/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /nvram/certs/test/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_digest
# Loading module "digest" from file /nvram/certs/test/raddb/mods-enabled/digest
# Loaded module rlm_mschap
# Loading module "mschap" from file /nvram/certs/test/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "exec" from file /nvram/certs/test/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_soh
# Loading module "soh" from file /nvram/certs/test/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_always
# Loading module "reject" from file /nvram/certs/test/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /nvram/certs/test/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /nvram/certs/test/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /nvram/certs/test/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /nvram/certs/test/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /nvram/certs/test/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /nvram/certs/test/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /nvram/certs/test/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /nvram/certs/test/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /nvram/certs/test/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loading module "sradutmp" from file /nvram/certs/test/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /nvram/certs/test/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "detail" from file /nvram/certs/test/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /nvram/certs/test/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /nvram/certs/test/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_files
# Loading module "files" from file /nvram/certs/test/raddb/mods-enabled/files
files {
filename = "/nvram/certs/test/raddb/mods-config/files/authorize"
acctusersfile = "/nvram/certs/test/raddb/mods-config/files/accounting"
preproxy_usersfile = "/nvram/certs/test/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_chap
# Loading module "chap" from file /nvram/certs/test/raddb/mods-enabled/chap
instantiate {
}
# Instantiating module "auth_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /nvram/certs/test/raddb/mods-enabled/detail.log
# Instantiating module "attr_filter.post-proxy" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
reading pairlist file /nvram/certs/test/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
reading pairlist file /nvram/certs/test/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
reading pairlist file /nvram/certs/test/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
reading pairlist file /nvram/certs/test/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /nvram/certs/test/raddb/mods-enabled/attr_filter
reading pairlist file /nvram/certs/test/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "expiration" from file /nvram/certs/test/raddb/mods-enabled/expiration
# Instantiating module "preprocess" from file /nvram/certs/test/raddb/mods-enabled/preprocess
reading pairlist file /nvram/certs/test/raddb/mods-config/preprocess/huntgroups
reading pairlist file /nvram/certs/test/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /nvram/certs/test/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /nvram/certs/test/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file /nvram/certs/test/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /nvram/certs/test/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /nvram/certs/test/raddb/mods-enabled/realm
# Instantiating module "cache_eap" from file /nvram/certs/test/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "pap" from file /nvram/certs/test/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file /nvram/certs/test/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "eap1" from file /nvram/certs/test/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/nvram/certs/test/raddb/certs"
pem_file_type = yes
private_key_file = "/nvram/certs/tstserver.key.pem"
certificate_file = "/nvram/certs/tstserver.cert.pem"
ca_file = "/nvram/certs/MYCARoot.pem"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
disable_tlsv1 = yes
disable_tlsv1_1 = yes
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
name = "EAP-TLS"
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
Please use tls_min_version and tls_max_version instead of disable_tlsv1
Please use tls_min_version and tls_max_version instead of disable_tlsv1_2
# Instantiating module "eap2" from file /nvram/certs/test/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/nvram/certs/test/raddb/certs"
pem_file_type = yes
private_key_file = "/nvram/certs/radiussrv.key.pem"
certificate_file = "/nvram/certs/radiussrv.cert.pem"
ca_file = "/nvram/certs/ca-chain.cert.pem"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
disable_tlsv1 = yes
disable_tlsv1_1 = yes
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
name = "EAP-TLS"
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
Please use tls_min_version and tls_max_version instead of disable_tlsv1
Please use tls_min_version and tls_max_version instead of disable_tlsv1_2
# Instantiating module "mschap" from file /nvram/certs/test/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "reject" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "fail" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "ok" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "handled" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "invalid" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "userlock" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "notfound" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "noop" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "updated" from file /nvram/certs/test/raddb/mods-enabled/always
# Instantiating module "logintime" from file /nvram/certs/test/raddb/mods-enabled/logintime
# Instantiating module "detail" from file /nvram/certs/test/raddb/mods-enabled/detail
# Instantiating module "linelog" from file /nvram/certs/test/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /nvram/certs/test/raddb/mods-enabled/linelog
# Instantiating module "files" from file /nvram/certs/test/raddb/mods-enabled/files
reading pairlist file /nvram/certs/test/raddb/mods-config/files/authorize
reading pairlist file /nvram/certs/test/raddb/mods-config/files/accounting
reading pairlist file /nvram/certs/test/raddb/mods-config/files/pre-proxy
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /nvram/certs/test/raddb/radiusd.conf
} # server
server default { # from file /nvram/certs/test/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /nvram/certs/test/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /nvram/certs/test/raddb/sites-enabled/inner-tunnel:342
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 50198
Listening on proxy address :: port 46713
Ready to process requests
(0) Received Access-Request Id 117 from 192.168.29.213:43428 to 192.168.29.213:1812 length 218
(0) User-Name = "hellouser"
(0) NAS-IP-Address = 192.168.29.213
(0) Called-Station-Id = "B8-27-EB-D2-47-49:RPI3_AP0"
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) Calling-Station-Id = "38-BA-F8-18-A9-4D"
(0) Connect-Info = "CONNECT 2Mbps 802.11g"
(0) Acct-Session-Id = "1D260C63FD66DB57"
(0) Acct-Multi-Session-Id = "E5E03C3E82488D73"
(0) WLAN-Pairwise-Cipher = 5304836
(0) WLAN-Group-Cipher = 1027074
(0) WLAN-AKM-Suite = 1027073
(0) Framed-MTU = 1400
(0) EAP-Message = 0x024a000e0168656c6c6f75736572
(0) Message-Authenticator = 0x67317c9b56ecd62afe91543ed5200856
(0) # Executing section authorize from file /nvram/certs/test/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "hellouser", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap1: Peer sent EAP Response (code 2) ID 74 length 14
(0) eap1: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap1] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap1
(0) # Executing group from file /nvram/certs/test/raddb/sites-enabled/default
(0) authenticate {
(0) eap1: Peer sent packet with method EAP Identity (1)
(0) eap1: Calling submodule eap_tls to process data
(0) eap_tls: Initiating new TLS session
(0) eap_tls: Setting verify mode to require certificate from client
(0) eap_tls: [eaptls start] = request
(0) eap1: Sending EAP Request (code 1) ID 75 length 6
(0) eap1: EAP session adding &reply:State = 0x61255b74616e56cf
(0) [eap1] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /nvram/certs/test/raddb/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 117 from 192.168.29.213:1812 to 192.168.29.213:43428 length 0
(0) EAP-Message = 0x014b00060d20
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x61255b74616e56cf956fc87a42b6482a
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 118 from 192.168.29.213:43428 to 192.168.29.213:1812 length 519
(1) User-Name = "hellouser"
(1) NAS-IP-Address = 192.168.29.213
(1) Called-Station-Id = "B8-27-EB-D2-47-49:RPI3_AP0"
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) Calling-Station-Id = "38-BA-F8-18-A9-4D"
(1) Connect-Info = "CONNECT 2Mbps 802.11g"
(1) Acct-Session-Id = "1D260C63FD66DB57"
(1) Acct-Multi-Session-Id = "E5E03C3E82488D73"
(1) WLAN-Pairwise-Cipher = 5304836
(1) WLAN-Group-Cipher = 1027074
(1) WLAN-AKM-Suite = 1027073
(1) Framed-MTU = 1400
(1) EAP-Message = 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
(1) State = 0x61255b74616e56cf956fc87a42b6482a
(1) Message-Authenticator = 0x31acb0947dfa17ba10b2ec15974fd1d2
(1) session-state: No cached attributes
(1) # Executing section authorize from file /nvram/certs/test/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "hellouser", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap1: Peer sent EAP Response (code 2) ID 75 length 295
(1) eap1: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap1] = updated
(1) eap2: Peer sent EAP Response (code 2) ID 75 length 295
(1) eap2: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap2] = updated
(1) files: users: Matched entry hellouser at line 91
(1) [files] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap1
(1) Found Auth-Type = eap2
(1) ERROR: Warning: Found 2 auth-types on request for user 'hellouser'
(1) # Executing group from file /nvram/certs/test/raddb/sites-enabled/default
(1) authenticate {
(1) eap2: ERROR: rlm_eap (eap2): No EAP session matching state 0x61255b74616e56cf
(1) eap2: Either EAP-request timed out OR EAP-response to an unknown EAP-request
(1) eap2: Failed in handler
(1) [eap2] = invalid
(1) } # authenticate = invalid
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /nvram/certs/test/raddb/sites-enabled/default
(1) Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject: --> hellouser
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1) [attr_filter.access_reject] = updated
(1) eap1: Expiring EAP session with state 0x61255b74616e56cf
(1) eap1: Finished EAP session with state 0x61255b74616e56cf
(1) eap1: Previous EAP request found for state 0x61255b74616e56cf, released from the list
(1) eap1: Request was previously rejected, inserting EAP-Failure
(1) eap1: Sending EAP Failure (code 4) ID 75 length 4
(1) [eap1] = updated
(1) [eap2] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # Post-Auth-Type REJECT = updated
More information about the Freeradius-Users
mailing list