Using variables in unlang conditions

[Rahman Duran]

Hi,

I am trying to do some filtering/policing in the authorize section of the
default virtual server. I need to check source ip matches our Wireless
Controllers and SSID and username format etc then decide what to do with
the request. How can I user some kind of alias/variable for our IP address
block so I should not need to write and update IP addresses multiple places?

Here sample of what I try to achieve:

//////////////////////
etu_aruba_wlc_001 = 10.10.243.0/24
etu_aruba_wlc_002 = 10.10.244.0/24
etu_aruba_wlc_002 = 10.10.245.0/24

  ### 001: Test Wifi Service ###
  *if ((&Packet-Src-IP-Address < ${etu_aruba_wlc_001}) \*
      && (&NAS-Port-Type == "Wireless-802.11") \
      && (&Called-Station-SSID == "bidb-test") \
      && (&User-Name =~ /[0-9a-fA-F]{12}/)) {

      update request {
        &ETU-Radius-Service-Name := "BIDB_Test"
      }

      # Authentication source
      files_bidb_test_mac_list

      # Authentication modules
      pap

      # If this service match, do not continue to check rest of the section
      return
  }

  ### 002: Simulation Lab Service ###
 * if ((&Packet-Src-IP-Address < ${etu_aruba_wlc_001}) \*
      && (&NAS-Port-Type == "Wireless-802.11") \
      && (&Called-Station-SSID == "saglik_bilimleri-sim-lab") \
      && (&User-Name =~ /[0-9a-fA-F]{12}/)) {

      update request {
        &ETU-Radius-Service-Name := "Saglik_Bilimleri_Sim_Lab"
      }

      # Authentication source
      files_saglik_bilimleri_sim_lab_mac_list

      # Authentication modules
      pap

      # If this service match, do not continue to check rest of the section
      return
  }


  ### DEFAULT REJECT: If no service matched reject undefined request
directly here  ###
  update session-state {
    Module-Failure-Message := "No matching service found for this request!"
  }
  reject
/////////////////////

Well using variables (${...}) in conditions not working, Freeradius
daemon not starting with parse error:

/etc/freeradius/3.0/sites-enabled/default[40]:
((&Packet-Src-IP-Address < *${etu_aruba_wlc_001})
*      && (&NAS-Port-Type == "Wireless-80...
/etc/freeradius/3.0/sites-enabled/default[40]:                            ^
Failed to parse value for attribute


Any hint on this? If it is possible I want to define IP blocks and groups
of IP blocks if possible and use them in unlang conditions.

Regards,

Rahman Duran
Bilgi İşlem Daire Başkanlığı
Erzurum Teknik Üniversitesi