FreeRadius and FreeIpa integration not working in our Lab setup
Michael Schwartzkopff
ms at sys4.de
Thu Jul 14 14:02:49 UTC 2022
On 14.07.22 09:07, Krishna Chaitanya wrote:
> My Question is like, Why is the request being Ignored?
>
> *Krishna Chaitanya Ala*
> *Network and Operations Engineer*
>
> *QI Cap Markets LLP*
> *Bangalore,Karnataka*
> *Slack : krishna.chaitanya at qi-cap.com <krishna.chaitanya at qi-cap.com>*
>
>
>
> On Thu, 14 Jul 2022 at 12:27, Michael Schwartzkopff <ms at sys4.de> wrote:
>
>> What is unclear about the log message:
>>
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.136
>>
>> Muchael
>>
>> 14.07.2022 08:47:56 Krishna Chaitanya <krishna.chaitanya at qi-cap.com>:
>>
>> Thanks very much Michael for your help and after making those changes, I
>> was able to see an Accept message from FreeRadius.
>> However, when trying to authenticate wireless using Freeradius I can see
>> something like below.
>> Please suggest!!
>> ==============================================
>> Listening on auth address * port 1812 bound to server default
>> Listening on acct address * port 1813 bound to server default
>> Listening on auth address :: port 1812 bound to server default
>> Listening on acct address :: port 1813 bound to server default
>> Listening on auth address 127.0.0.1 port 18120 bound to server
>> inner-tunnel
>> Listening on proxy address * port 34082
>> Listening on proxy address :: port 42473
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.89 port 49457 proto udp
>> Ready to process requests
>> Ignoring request to auth address * port 1812 bound to server default from
>> unknown client 122.1.5.136 port 37235 proto udp
>> Ready to process requests
>>
>> Thanks
>> Krishna
>>
>>
>>
>>
>>
>> On Wed, 13 Jul 2022 at 17:03, Michael Schwartzkopff <ms at sys4.de> wrote:
>>
>>> On 13.07.22 12:59, Krishna Chaitanya wrote:
>>>> Michael,
>>>> The manual search is giving expected results but not sure why I am
>>> seeing 2
>>>> search results.
>>>> Please find the below radtest results along with the manual ldap search
>>>> report.
>>>>
>>>> ================================================================
>>>> [admin at freeradius raddb]$ ldapsearch -x uid=*krishnachaitanya*
>>>> # extended LDIF
>>>> #
>>>> # LDAPv3
>>>> # base <dc=qi-cap,dc=com> (default) with scope subtree
>>>> # filter: uid=krishnachaitanya
>>>> # requesting: ALL
>>>> #
>>>>
>>>> # krishnachaitanya, users, compat, qi-cap.com
>>>> dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
>>>> objectClass: posixAccount
>>>> objectClass: ipaOverrideTarget
>>>> objectClass: top
>>>> gecos: Krishna Ala
>>>> cn: Krishna Ala
>>>> uidNumber: 1283800005
>>>> gidNumber: 1283800005
>>>> loginShell: /bin/sh
>>>> homeDirectory: /home/krishnachaitanya
>>>> ipaAnchorUUID::
>>>> OklQQTpxaS1jYXAuY29tOmY1N2IxYTcyLWZlYjAtMTFlYy04MWYxLTA4MDAyNz
>>>> M2ZWMzOQ==
>>>> uid: krishnachaitanya
>>>>
>>>> # krishnachaitanya, users, accounts, qi-cap.com
>>>> dn: uid=krishnachaitanya,cn=users,cn=accounts,dc=qi-cap,dc=com
>>>> givenName: Krishna
>>>> sn: Ala
>>>> uid: krishnachaitanya
>>>> cn: Krishna Ala
>>>> displayName: Krishna Ala
>>>> initials: KA
>>>> gecos: Krishna Ala
>>>> objectClass: top
>>>> objectClass: person
>>>> objectClass: organizationalperson
>>>> objectClass: inetorgperson
>>>> objectClass: inetuser
>>>> objectClass: posixaccount
>>>> objectClass: krbprincipalaux
>>>> objectClass: krbticketpolicyaux
>>>> objectClass: ipaobject
>>>> objectClass: ipasshuser
>>>> objectClass: ipaSshGroupOfPubKeys
>>>> objectClass: mepOriginEntry
>>>> objectClass: ipantuserattrs
>>>> loginShell: /bin/sh
>>>> homeDirectory: /home/krishnachaitanya
>>>> uidNumber: 1283800005
>>>> gidNumber: 1283800005
>>>> ipaNTSecurityIdentifier: S-1-5-21-2716401607-2924185208-1841578509-1005
>>>>
>>>> # search result
>>>> search: 2
>>>> result: 0 Success
>>>>
>>>> # numResponses: 3
>>>> # numEntries: 2
>>>>
>>> ===============================================================================================
>>>
>>>> [root at freeradius admin]# radiusd -X
>>>> FreeRADIUS Version 3.0.21
>>>> Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
>>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>>> PARTICULAR PURPOSE
>>>> You may redistribute copies of FreeRADIUS under the terms of the
>>>> GNU General Public License
>>>> For more information about these matters, see the file named COPYRIGHT
>>>> Starting - reading configuration files ...
>>>> including dictionary file /usr/share/freeradius/dictionary
>>>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>>>> including dictionary file /usr/share/freeradius/dictionary.vqp
>>>> including dictionary file /etc/raddb/dictionary
>>>> including configuration file /etc/raddb/radiusd.conf
>>>> including configuration file /etc/raddb/proxy.conf
>>>> including configuration file /etc/raddb/clients.conf
>>>> including files in directory /etc/raddb/mods-enabled/
>>>> including configuration file /etc/raddb/mods-enabled/always
>>>> including configuration file /etc/raddb/mods-enabled/attr_filter
>>>> including configuration file /etc/raddb/mods-enabled/cache_eap
>>>> including configuration file /etc/raddb/mods-enabled/chap
>>>> including configuration file /etc/raddb/mods-enabled/date
>>>> including configuration file /etc/raddb/mods-enabled/detail
>>>> including configuration file /etc/raddb/mods-enabled/detail.log
>>>> including configuration file /etc/raddb/mods-enabled/digest
>>>> including configuration file /etc/raddb/mods-enabled/dynamic_clients
>>>> including configuration file /etc/raddb/mods-enabled/eap
>>>> including configuration file /etc/raddb/mods-enabled/echo
>>>> including configuration file /etc/raddb/mods-enabled/exec
>>>> including configuration file /etc/raddb/mods-enabled/expiration
>>>> including configuration file /etc/raddb/mods-enabled/expr
>>>> including configuration file /etc/raddb/mods-enabled/files
>>>> including configuration file /etc/raddb/mods-enabled/linelog
>>>> including configuration file /etc/raddb/mods-enabled/logintime
>>>> including configuration file /etc/raddb/mods-enabled/mschap
>>>> including configuration file /etc/raddb/mods-enabled/ntlm_auth
>>>> including configuration file /etc/raddb/mods-enabled/pap
>>>> including configuration file /etc/raddb/mods-enabled/passwd
>>>> including configuration file /etc/raddb/mods-enabled/preprocess
>>>> including configuration file /etc/raddb/mods-enabled/radutmp
>>>> including configuration file /etc/raddb/mods-enabled/realm
>>>> including configuration file /etc/raddb/mods-enabled/replicate
>>>> including configuration file /etc/raddb/mods-enabled/soh
>>>> including configuration file /etc/raddb/mods-enabled/sradutmp
>>>> including configuration file /etc/raddb/mods-enabled/unix
>>>> including configuration file /etc/raddb/mods-enabled/unpack
>>>> including configuration file /etc/raddb/mods-enabled/utf8
>>>> including configuration file /etc/raddb/mods-enabled/ldap
>>>> including files in directory /etc/raddb/policy.d/
>>>> including configuration file /etc/raddb/policy.d/accounting
>>>> including configuration file /etc/raddb/policy.d/canonicalization
>>>> including configuration file /etc/raddb/policy.d/control
>>>> including configuration file /etc/raddb/policy.d/cui
>>>> including configuration file /etc/raddb/policy.d/debug
>>>> including configuration file /etc/raddb/policy.d/dhcp
>>>> including configuration file /etc/raddb/policy.d/eap
>>>> including configuration file /etc/raddb/policy.d/filter
>>>> including configuration file /etc/raddb/policy.d/operator-name
>>>> including configuration file /etc/raddb/policy.d/rfc7542
>>>> including files in directory /etc/raddb/sites-enabled/
>>>> including configuration file /etc/raddb/sites-enabled/default
>>>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>>>> main {
>>>> security {
>>>> user = "radiusd"
>>>> group = "radiusd"
>>>> allow_core_dumps = no
>>>> }
>>>> name = "radiusd"
>>>> prefix = "/usr"
>>>> localstatedir = "/var"
>>>> logdir = "/var/log/radius"
>>>> run_dir = "/var/run/radiusd"
>>>> }
>>>> main {
>>>> name = "radiusd"
>>>> prefix = "/usr"
>>>> localstatedir = "/var"
>>>> sbindir = "/usr/sbin"
>>>> logdir = "/var/log/radius"
>>>> run_dir = "/var/run/radiusd"
>>>> libdir = "/usr/lib64/freeradius"
>>>> radacctdir = "/var/log/radius/radacct"
>>>> hostname_lookups = no
>>>> max_request_time = 30
>>>> cleanup_delay = 5
>>>> max_requests = 16384
>>>> pidfile = "/var/run/radiusd/radiusd.pid"
>>>> checkrad = "/usr/sbin/checkrad"
>>>> debug_level = 0
>>>> proxy_requests = yes
>>>> log {
>>>> stripped_names = no
>>>> auth = no
>>>> auth_badpass = no
>>>> auth_goodpass = no
>>>> colourise = yes
>>>> msg_denied = "You are already logged in - access denied"
>>>> }
>>>> resources {
>>>> }
>>>> security {
>>>> max_attributes = 200
>>>> reject_delay = 1.000000
>>>> status_server = yes
>>>> }
>>>> }
>>>> radiusd: #### Loading Realms and Home Servers ####
>>>> proxy server {
>>>> retry_delay = 5
>>>> retry_count = 3
>>>> default_fallback = no
>>>> dead_time = 120
>>>> wake_all_if_all_dead = no
>>>> }
>>>> home_server localhost {
>>>> ipaddr = 127.0.0.1
>>>> port = 1812
>>>> type = "auth"
>>>> secret = <<< secret >>>
>>>> response_window = 20.000000
>>>> response_timeouts = 1
>>>> max_outstanding = 65536
>>>> zombie_period = 40
>>>> status_check = "status-server"
>>>> ping_interval = 30
>>>> check_interval = 30
>>>> check_timeout = 4
>>>> num_answers_to_alive = 3
>>>> revive_interval = 120
>>>> limit {
>>>> max_connections = 16
>>>> max_requests = 0
>>>> lifetime = 0
>>>> idle_timeout = 0
>>>> }
>>>> coa {
>>>> irt = 2
>>>> mrt = 16
>>>> mrc = 5
>>>> mrd = 30
>>>> }
>>>> }
>>>> home_server_pool my_auth_failover {
>>>> type = fail-over
>>>> home_server = localhost
>>>> }
>>>> realm example.com {
>>>> auth_pool = my_auth_failover
>>>> }
>>>> realm LOCAL {
>>>> }
>>>> radiusd: #### Loading Clients ####
>>>> client localhost {
>>>> ipaddr = 122.1.5.84
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> nas_type = "other"
>>>> proto = "*"
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> client localhost_ipv6 {
>>>> ipv6addr = ::1
>>>> require_message_authenticator = no
>>>> secret = <<< secret >>>
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> Debugger not attached
>>>> # Creating Auth-Type = mschap
>>>> # Creating Auth-Type = digest
>>>> # Creating Auth-Type = eap
>>>> # Creating Auth-Type = PAP
>>>> # Creating Auth-Type = CHAP
>>>> # Creating Auth-Type = MS-CHAP
>>>> # Creating Auth-Type = LDAP
>>>> radiusd: #### Instantiating modules ####
>>>> modules {
>>>> # Loaded module rlm_always
>>>> # Loading module "reject" from file /etc/raddb/mods-enabled/always
>>>> always reject {
>>>> rcode = "reject"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "fail" from file /etc/raddb/mods-enabled/always
>>>> always fail {
>>>> rcode = "fail"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "ok" from file /etc/raddb/mods-enabled/always
>>>> always ok {
>>>> rcode = "ok"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "handled" from file /etc/raddb/mods-enabled/always
>>>> always handled {
>>>> rcode = "handled"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
>>>> always invalid {
>>>> rcode = "invalid"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
>>>> always userlock {
>>>> rcode = "userlock"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
>>>> always notfound {
>>>> rcode = "notfound"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "noop" from file /etc/raddb/mods-enabled/always
>>>> always noop {
>>>> rcode = "noop"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loading module "updated" from file /etc/raddb/mods-enabled/always
>>>> always updated {
>>>> rcode = "updated"
>>>> simulcount = 0
>>>> mpp = no
>>>> }
>>>> # Loaded module rlm_attr_filter
>>>> # Loading module "attr_filter.post-proxy" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.post-proxy {
>>>> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>>>> key = "%{Realm}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.pre-proxy" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.pre-proxy {
>>>> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>>>> key = "%{Realm}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.access_reject" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.access_reject {
>>>> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.access_challenge" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.access_challenge {
>>>> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> # Loading module "attr_filter.accounting_response" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> attr_filter attr_filter.accounting_response {
>>>> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
>>>> key = "%{User-Name}"
>>>> relaxed = no
>>>> }
>>>> # Loaded module rlm_cache
>>>> # Loading module "cache_eap" from file
>>> /etc/raddb/mods-enabled/cache_eap
>>>> cache cache_eap {
>>>> driver = "rlm_cache_rbtree"
>>>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>>>> ttl = 15
>>>> max_entries = 0
>>>> epoch = 0
>>>> add_stats = no
>>>> }
>>>> # Loaded module rlm_chap
>>>> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
>>>> # Loaded module rlm_date
>>>> # Loading module "date" from file /etc/raddb/mods-enabled/date
>>>> date {
>>>> format = "%b %e %Y %H:%M:%S %Z"
>>>> utc = no
>>>> }
>>>> # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
>>>> date wispr2date {
>>>> format = "%Y-%m-%dT%H:%M:%S"
>>>> utc = no
>>>> }
>>>> # Loaded module rlm_detail
>>>> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
>>>> detail {
>>>> filename =
>>>>
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>>>
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "auth_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>>> detail auth_log {
>>>> filename =
>>>>
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>>>
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "reply_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>>> detail reply_log {
>>>> filename =
>>>>
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>>>
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "pre_proxy_log" from file
>>>> /etc/raddb/mods-enabled/detail.log
>>>> detail pre_proxy_log {
>>>> filename =
>>>>
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>>>
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loading module "post_proxy_log" from file
>>>> /etc/raddb/mods-enabled/detail.log
>>>> detail post_proxy_log {
>>>> filename =
>>>>
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>>>
>>>> header = "%t"
>>>> permissions = 384
>>>> locking = no
>>>> escape_filenames = no
>>>> log_packet_header = no
>>>> }
>>>> # Loaded module rlm_digest
>>>> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
>>>> # Loaded module rlm_dynamic_clients
>>>> # Loading module "dynamic_clients" from file
>>>> /etc/raddb/mods-enabled/dynamic_clients
>>>> # Loaded module rlm_eap
>>>> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
>>>> eap {
>>>> default_eap_type = "md5"
>>>> timer_expire = 60
>>>> ignore_unknown_eap_types = no
>>>> cisco_accounting_username_bug = no
>>>> max_sessions = 16384
>>>> }
>>>> # Loaded module rlm_exec
>>>> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
>>>> exec echo {
>>>> wait = yes
>>>> program = "/bin/echo %{User-Name}"
>>>> input_pairs = "request"
>>>> output_pairs = "reply"
>>>> shell_escape = yes
>>>> }
>>>> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
>>>> exec {
>>>> wait = no
>>>> input_pairs = "request"
>>>> shell_escape = yes
>>>> timeout = 10
>>>> }
>>>> # Loaded module rlm_expiration
>>>> # Loading module "expiration" from file
>>> /etc/raddb/mods-enabled/expiration
>>>> # Loaded module rlm_expr
>>>> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
>>>> expr {
>>>> safe_characters =
>>>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
>>>> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>>>> }
>>>> # Loaded module rlm_files
>>>> # Loading module "files" from file /etc/raddb/mods-enabled/files
>>>> files {
>>>> filename = "/etc/raddb/mods-config/files/authorize"
>>>> acctusersfile = "/etc/raddb/mods-config/files/accounting"
>>>> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>>>> }
>>>> # Loaded module rlm_linelog
>>>> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
>>>> linelog {
>>>> filename = "/var/log/radius/linelog"
>>>> escape_filenames = no
>>>> syslog_severity = "info"
>>>> permissions = 384
>>>> format = "This is a log message for %{User-Name}"
>>>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>>>> }
>>>> # Loading module "log_accounting" from file
>>>> /etc/raddb/mods-enabled/linelog
>>>> linelog log_accounting {
>>>> filename = "/var/log/radius/linelog-accounting"
>>>> escape_filenames = no
>>>> syslog_severity = "info"
>>>> permissions = 384
>>>> format = ""
>>>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>>>> }
>>>> # Loaded module rlm_logintime
>>>> # Loading module "logintime" from file
>>> /etc/raddb/mods-enabled/logintime
>>>> logintime {
>>>> minimum_timeout = 60
>>>> }
>>>> # Loaded module rlm_mschap
>>>> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
>>>> mschap {
>>>> use_mppe = yes
>>>> require_encryption = no
>>>> require_strong = no
>>>> with_ntdomain_hack = yes
>>>> passchange {
>>>> }
>>>> allow_retry = yes
>>>> winbind_retry_with_normalised_username = no
>>>> }
>>>> # Loading module "ntlm_auth" from file
>>> /etc/raddb/mods-enabled/ntlm_auth
>>>> exec ntlm_auth {
>>>> wait = yes
>>>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>>>> --username=%{mschap:User-Name} --password=%{User-Password}"
>>>> shell_escape = yes
>>>> }
>>>> # Loaded module rlm_pap
>>>> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
>>>> pap {
>>>> normalise = yes
>>>> }
>>>> # Loaded module rlm_passwd
>>>> # Loading module "etc_passwd" from file
>>> /etc/raddb/mods-enabled/passwd
>>>> passwd etc_passwd {
>>>> filename = "/etc/passwd"
>>>> format = "*User-Name:Crypt-Password:"
>>>> delimiter = ":"
>>>> ignore_nislike = no
>>>> ignore_empty = yes
>>>> allow_multiple_keys = no
>>>> hash_size = 100
>>>> }
>>>> # Loaded module rlm_preprocess
>>>> # Loading module "preprocess" from file
>>> /etc/raddb/mods-enabled/preprocess
>>>> preprocess {
>>>> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>>>> hints = "/etc/raddb/mods-config/preprocess/hints"
>>>> with_ascend_hack = no
>>>> ascend_channels_per_line = 23
>>>> with_ntdomain_hack = no
>>>> with_specialix_jetstream_hack = no
>>>> with_cisco_vsa_hack = no
>>>> with_alvarion_vsa_hack = no
>>>> }
>>>> # Loaded module rlm_radutmp
>>>> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>>>> radutmp {
>>>> filename = "/var/log/radius/radutmp"
>>>> username = "%{User-Name}"
>>>> case_sensitive = yes
>>>> check_with_nas = yes
>>>> permissions = 384
>>>> caller_id = yes
>>>> }
>>>> # Loaded module rlm_realm
>>>> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
>>>> realm IPASS {
>>>> format = "prefix"
>>>> delimiter = "/"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
>>>> realm suffix {
>>>> format = "suffix"
>>>> delimiter = "@"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
>>>> realm bangpath {
>>>> format = "prefix"
>>>> delimiter = "!"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "realmpercent" from file
>>> /etc/raddb/mods-enabled/realm
>>>> realm realmpercent {
>>>> format = "suffix"
>>>> delimiter = "%"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
>>>> realm ntdomain {
>>>> format = "prefix"
>>>> delimiter = "\\"
>>>> ignore_default = no
>>>> ignore_null = no
>>>> }
>>>> # Loaded module rlm_replicate
>>>> # Loading module "replicate" from file
>>> /etc/raddb/mods-enabled/replicate
>>>> # Loaded module rlm_soh
>>>> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
>>>> soh {
>>>> dhcp = yes
>>>> }
>>>> # Loading module "sradutmp" from file
>>> /etc/raddb/mods-enabled/sradutmp
>>>> radutmp sradutmp {
>>>> filename = "/var/log/radius/sradutmp"
>>>> username = "%{User-Name}"
>>>> case_sensitive = yes
>>>> check_with_nas = yes
>>>> permissions = 420
>>>> caller_id = no
>>>> }
>>>> # Loaded module rlm_unix
>>>> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
>>>> unix {
>>>> radwtmp = "/var/log/radius/radwtmp"
>>>> }
>>>> Creating attribute Unix-Group
>>>> # Loaded module rlm_unpack
>>>> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
>>>> # Loaded module rlm_utf8
>>>> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
>>>> # Loaded module rlm_ldap
>>>> # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
>>>> ldap {
>>>> server = "122.1.5.84"
>>>> sasl {
>>>> }
>>>> user_dn = "LDAP-UserDn"
>>>> user {
>>>> scope = "sub"
>>>> access_positive = yes
>>>> sasl {
>>>> }
>>>> }
>>>> group {
>>>> filter = "(objectClass=posixGroup)"
>>>> scope = "sub"
>>>> name_attribute = "cn"
>>>> membership_attribute = "memberOf"
>>>> cacheable_name = no
>>>> cacheable_dn = no
>>>> allow_dangling_group_ref = no
>>>> }
>>>> client {
>>>> filter = "(objectClass=radiusClient)"
>>>> scope = "sub"
>>>> base_dn = "O=QI-CAP.COM,CN=Certificate
>>>> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
>>>> }
>>>> profile {
>>>> }
>>>> options {
>>>> ldap_debug = 40
>>>> chase_referrals = yes
>>>> rebind = yes
>>>> net_timeout = 1
>>>> res_timeout = 10
>>>> srv_timelimit = 3
>>>> idle = 60
>>>> probes = 3
>>>> interval = 3
>>>> }
>>>> tls {
>>>> start_tls = no
>>>> }
>>>> }
>>>> Creating attribute LDAP-Group
>>>> instantiate {
>>>> }
>>>> # Instantiating module "reject" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "fail" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>>>> # Instantiating module "handled" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "invalid" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "userlock" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "notfound" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "noop" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "updated" from file
>>> /etc/raddb/mods-enabled/always
>>>> # Instantiating module "attr_filter.post-proxy" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>>>> # Instantiating module "attr_filter.pre-proxy" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>>>> # Instantiating module "attr_filter.access_reject" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
>>>> # Instantiating module "attr_filter.access_challenge" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file
>>> /etc/raddb/mods-config/attr_filter/access_challenge
>>>> # Instantiating module "attr_filter.accounting_response" from file
>>>> /etc/raddb/mods-enabled/attr_filter
>>>> reading pairlist file
>>> /etc/raddb/mods-config/attr_filter/accounting_response
>>>> # Instantiating module "cache_eap" from file
>>>> /etc/raddb/mods-enabled/cache_eap
>>>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
>>> rlm_cache_rbtree)
>>>> loaded and linked
>>>> # Instantiating module "detail" from file
>>> /etc/raddb/mods-enabled/detail
>>>> # Instantiating module "auth_log" from file
>>>> /etc/raddb/mods-enabled/detail.log
>>>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>>>> detail output
>>>> # Instantiating module "reply_log" from file
>>>> /etc/raddb/mods-enabled/detail.log
>>>> # Instantiating module "pre_proxy_log" from file
>>>> /etc/raddb/mods-enabled/detail.log
>>>> # Instantiating module "post_proxy_log" from file
>>>> /etc/raddb/mods-enabled/detail.log
>>>> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>>>> # Linked to sub-module rlm_eap_md5
>>>> # Linked to sub-module rlm_eap_leap
>>>> # Linked to sub-module rlm_eap_gtc
>>>> gtc {
>>>> challenge = "Password: "
>>>> auth_type = "PAP"
>>>> }
>>>> # Linked to sub-module rlm_eap_tls
>>>> tls {
>>>> tls = "tls-common"
>>>> }
>>>> tls-config tls-common {
>>>> verify_depth = 0
>>>> ca_path = "/etc/raddb/certs"
>>>> pem_file_type = yes
>>>> private_key_file = "/etc/raddb/certs/server.pem"
>>>> certificate_file = "/etc/raddb/certs/server.pem"
>>>> ca_file = "/etc/raddb/certs/ca.pem"
>>>> private_key_password = <<< secret >>>
>>>> dh_file = "/etc/raddb/certs/dh"
>>>> fragment_size = 1024
>>>> include_length = yes
>>>> auto_chain = yes
>>>> check_crl = no
>>>> check_all_crl = no
>>>> ca_path_reload_interval = 0
>>>> cipher_list = "PROFILE=SYSTEM"
>>>> cipher_server_preference = no
>>>> reject_unknown_intermediate_ca = no
>>>> ecdh_curve = "prime256v1"
>>>> disable_tlsv1 = yes
>>>> disable_tlsv1_1 = yes
>>>> tls_max_version = "1.2"
>>>> tls_min_version = "1.2"
>>>> cache {
>>>> enable = no
>>>> lifetime = 24
>>>> max_entries = 255
>>>> }
>>>> verify {
>>>> skip_if_ocsp_ok = no
>>>> }
>>>> ocsp {
>>>> enable = no
>>>> override_cert_url = yes
>>>> url = "http://127.0.0.1/ocsp/"
>>>> use_nonce = yes
>>>> timeout = 0
>>>> softfail = no
>>>> }
>>>> }
>>>> tls: Please use 'tls_min_version' and 'tls_max_version' instead of
>>>> 'disable_tlsv1'
>>>> tls: Please use 'tls_min_version' and 'tls_max_version' instead of
>>>> 'disable_tlsv1_1'
>>>> tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer
>>>> necessary.
>>>> tls: You should comment out the 'dh_file' configuration item.
>>>> # Linked to sub-module rlm_eap_ttls
>>>> ttls {
>>>> tls = "tls-common"
>>>> default_eap_type = "md5"
>>>> copy_request_to_tunnel = no
>>>> use_tunneled_reply = no
>>>> virtual_server = "inner-tunnel"
>>>> include_length = yes
>>>> require_client_cert = no
>>>> }
>>>> tls: Using cached TLS configuration from previous invocation
>>>> # Linked to sub-module rlm_eap_peap
>>>> peap {
>>>> tls = "tls-common"
>>>> default_eap_type = "mschapv2"
>>>> copy_request_to_tunnel = no
>>>> use_tunneled_reply = no
>>>> proxy_tunneled_request_as_eap = yes
>>>> virtual_server = "inner-tunnel"
>>>> soh = no
>>>> require_client_cert = no
>>>> }
>>>> tls: Using cached TLS configuration from previous invocation
>>>> # Linked to sub-module rlm_eap_mschapv2
>>>> mschapv2 {
>>>> with_ntdomain_hack = no
>>>> send_error = no
>>>> }
>>>> # Instantiating module "expiration" from file
>>>> /etc/raddb/mods-enabled/expiration
>>>> # Instantiating module "files" from file
>>> /etc/raddb/mods-enabled/files
>>>> reading pairlist file /etc/raddb/mods-config/files/authorize
>>>> reading pairlist file /etc/raddb/mods-config/files/accounting
>>>> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>>>> # Instantiating module "linelog" from file
>>> /etc/raddb/mods-enabled/linelog
>>>> # Instantiating module "log_accounting" from file
>>>> /etc/raddb/mods-enabled/linelog
>>>> # Instantiating module "logintime" from file
>>>> /etc/raddb/mods-enabled/logintime
>>>> # Instantiating module "mschap" from file
>>> /etc/raddb/mods-enabled/mschap
>>>> rlm_mschap (mschap): using internal authentication
>>>> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>>>> # Instantiating module "etc_passwd" from file
>>>> /etc/raddb/mods-enabled/passwd
>>>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>>>> # Instantiating module "preprocess" from file
>>>> /etc/raddb/mods-enabled/preprocess
>>>> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
>>>> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>>>> # Instantiating module "IPASS" from file
>>> /etc/raddb/mods-enabled/realm
>>>> # Instantiating module "suffix" from file
>>> /etc/raddb/mods-enabled/realm
>>>> # Instantiating module "bangpath" from file
>>> /etc/raddb/mods-enabled/realm
>>>> # Instantiating module "realmpercent" from file
>>>> /etc/raddb/mods-enabled/realm
>>>> # Instantiating module "ntdomain" from file
>>> /etc/raddb/mods-enabled/realm
>>>> # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
>>>> rlm_ldap: libldap vendor: OpenLDAP, version: 20459
>>>> accounting {
>>>> reference = "%{tolower:type.%{Acct-Status-Type}}"
>>>> }
>>>> post-auth {
>>>> reference = "."
>>>> }
>>>> rlm_ldap (ldap): Initialising connection pool
>>>> pool {
>>>> start = 5
>>>> min = 3
>>>> max = 32
>>>> spare = 10
>>>> uses = 0
>>>> lifetime = 0
>>>> cleanup_interval = 30
>>>> idle_timeout = 60
>>>> retry_delay = 30
>>>> spread = no
>>>> }
>>>> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending
>>> slots
>>>> used
>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>> rlm_ldap (ldap): Waiting for bind result...
>>>> rlm_ldap (ldap): Bind successful
>>>> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending
>>> slots
>>>> used
>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>> rlm_ldap (ldap): Waiting for bind result...
>>>> rlm_ldap (ldap): Bind successful
>>>> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending
>>> slots
>>>> used
>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>> rlm_ldap (ldap): Waiting for bind result...
>>>> rlm_ldap (ldap): Bind successful
>>>> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending
>>> slots
>>>> used
>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>> rlm_ldap (ldap): Waiting for bind result...
>>>> rlm_ldap (ldap): Bind successful
>>>> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending
>>> slots
>>>> used
>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>> rlm_ldap (ldap): Waiting for bind result...
>>>> rlm_ldap (ldap): Bind successful
>>>> } # modules
>>>> radiusd: #### Loading Virtual Servers ####
>>>> server { # from file /etc/raddb/radiusd.conf
>>>> } # server
>>>> server default { # from file /etc/raddb/sites-enabled/default
>>>> # Loading authenticate {...}
>>>> # Loading authorize {...}
>>>> Ignoring "sql" (see raddb/mods-available/README.rst)
>>>> # Loading preacct {...}
>>>> # Loading accounting {...}
>>>> # Loading post-proxy {...}
>>>> # Loading post-auth {...}
>>>> } # server default
>>>> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>>>> # Loading authenticate {...}
>>>> # Loading authorize {...}
>>>> # Loading session {...}
>>>> # Loading post-proxy {...}
>>>> # Loading post-auth {...}
>>>> # Skipping contents of 'if' as it is always 'false' --
>>>> /etc/raddb/sites-enabled/inner-tunnel:341
>>>> } # server inner-tunnel
>>>> radiusd: #### Opening IP addresses and Ports ####
>>>> listen {
>>>> type = "auth"
>>>> ipaddr = *
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "acct"
>>>> ipaddr = *
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "auth"
>>>> ipv6addr = ::
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "acct"
>>>> ipv6addr = ::
>>>> port = 0
>>>> limit {
>>>> max_connections = 16
>>>> lifetime = 0
>>>> idle_timeout = 30
>>>> }
>>>> }
>>>> listen {
>>>> type = "auth"
>>>> ipaddr = 127.0.0.1
>>>> port = 18120
>>>> }
>>>> Listening on auth address * port 1812 bound to server default
>>>> Listening on acct address * port 1813 bound to server default
>>>> Listening on auth address :: port 1812 bound to server default
>>>> Listening on acct address :: port 1813 bound to server default
>>>> Listening on auth address 127.0.0.1 port 18120 bound to server
>>> inner-tunnel
>>>> Listening on proxy address * port 43356
>>>> Listening on proxy address :: port 50675
>>>> Ready to process requests
>>>> (0) Received Access-Request Id 11 from 122.1.5.84:43809 to
>>> 122.1.5.84:1812
>>>> length 86
>>>> (0) User-Name = "krishnachaitanya"
>>>> (0) User-Password = "Freeip at 1234"
>>>> (0) NAS-IP-Address = 122.1.5.84
>>>> (0) NAS-Port = 1812
>>>> (0) Message-Authenticator = 0x9162e9e3154076ccc69ddab02d33be4e
>>>> (0) # Executing section authorize from file
>>> /etc/raddb/sites-enabled/default
>>>> (0) authorize {
>>>> (0) policy filter_username {
>>>> (0) if (&User-Name) {
>>>> (0) if (&User-Name) -> TRUE
>>>> (0) if (&User-Name) {
>>>> (0) if (&User-Name =~ / /) {
>>>> (0) if (&User-Name =~ / /) -> FALSE
>>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>>> (0) if (&User-Name =~ /\.\./ ) {
>>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>>> {
>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>>> ->
>>>> FALSE
>>>> (0) if (&User-Name =~ /\.$/) {
>>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>>> (0) if (&User-Name =~ /@\./) {
>>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>>> (0) } # if (&User-Name) = notfound
>>>> (0) } # policy filter_username = notfound
>>>> (0) [preprocess] = ok
>>>> (0) [chap] = noop
>>>> (0) [mschap] = noop
>>>> (0) [digest] = noop
>>>> (0) suffix: Checking for suffix after "@"
>>>> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm
>>> NULL
>>>> (0) suffix: No such realm "NULL"
>>>> (0) [suffix] = noop
>>>> (0) eap: No EAP-Message, not doing EAP
>>>> (0) [eap] = noop
>>>> (0) [files] = noop
>>>> rlm_ldap (ldap): Reserved connection (0)
>>>> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
>>>> (0) ldap: --> (uid=krishnachaitanya)
>>>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
>>>> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
>>> with
>>>> filter "(uid=krishnachaitanya)", scope "sub"
>>>> (0) ldap: Waiting for search result...
>>>> (0) ldap: The specified DN wasn't found
>>>> (0) ldap: Search returned no results
>>>> rlm_ldap (ldap): Released connection (0)
>>>> Need 5 more connections to reach 10 spares
>>>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
>>> slots
>>>> used
>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>> rlm_ldap (ldap): Waiting for bind result...
>>>> rlm_ldap (ldap): Bind successful
>>>> (0) [ldap] = notfound
>>>> (0) if ((ok || updated) && User-Password) {
>>>> (0) if ((ok || updated) && User-Password) -> FALSE
>>>> (0) [expiration] = noop
>>>> (0) [logintime] = noop
>>>> (0) pap: WARNING: No "known good" password found for the user. Not
>>> setting
>>>> Auth-Type
>>>> (0) pap: WARNING: Authentication will fail unless a "known good"
>>> password
>>>> is available
>>>> (0) [pap] = noop
>>>> (0) } # authorize = ok
>>>> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
>>>> Reject
>>>> (0) Failed to authenticate the user
>>>> (0) Using Post-Auth-Type Reject
>>>> (0) # Executing group from file /etc/raddb/sites-enabled/default
>>>> (0) Post-Auth-Type REJECT {
>>>> (0) attr_filter.access_reject: EXPAND %{User-Name}
>>>> (0) attr_filter.access_reject: --> krishnachaitanya
>>>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
>>>> (0) [attr_filter.access_reject] = updated
>>>> (0) [eap] = noop
>>>> (0) policy remove_reply_message_if_eap {
>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>>> (0) else {
>>>> (0) [noop] = noop
>>>> (0) } # else = noop
>>>> (0) } # policy remove_reply_message_if_eap = noop
>>>> (0) } # Post-Auth-Type REJECT = updated
>>>> (0) Delaying response for 1.000000 seconds
>>>> Waking up in 0.1 seconds.
>>>> Waking up in 0.8 seconds.
>>>> (0) Sending delayed response
>>>> (0) Sent Access-Reject Id 11 from 122.1.5.84:1812 to 122.1.5.84:43809
>>>> length 20
>>>> Waking up in 3.9 seconds.
>>>> (0) Cleaning up request packet ID 11 with timestamp +10
>>>> Ready to process requests
>>>>
>>> ============================================================================
>>>
>>>> *Krishna Chaitanya Ala*
>>>> *Network and Operations Engineer*
>>>>
>>>> *QI Cap Markets LLP*
>>>> *Bangalore,Karnataka*
>>>> *Slack : krishna.chaitanya at qi-cap.com <krishna.chaitanya at qi-cap.com>*
>>>>
>>>>
>>>>
>>>> On Wed, 13 Jul 2022 at 15:25, Michael Schwartzkopff via
>>> Freeradius-Users <
>>>> freeradius-users at lists.freeradius.org> wrote:
>>>>
>>>>> On 13.07.22 11:52, Krishna Chaitanya wrote:
>>>>>> Matthew,
>>>>>> Not really,Somehow, I missed reading all of the debug report.
>>>>>> I am very new to Linux and having a hard time interpreting all of the
>>>>> Debug
>>>>>> report.
>>>>>> However, After going through the errors:
>>>>>>
>>>>>> 1. I can say that the username is not being used twice.Even,
>>> created
>>>>>> another user profile with username "krishnachaitanya" and
>>> getting
>>>>> the same
>>>>>> error message when running the radtest.
>>>>>> 2. In the next test run, modified "base_dn" details as
>>>>>> 'O=QI-CAP.COM,CN=Certificate
>>>>>> Authority' and the test resulted in the below error.After
>>> reviewing
>>>>> the
>>>>>> highlighted errors, finding it confused to understand and not
>>> really
>>>>> sure
>>>>>> the fix for these errors.As far as I know, PAP can read only
>>> clear
>>>>> text
>>>>>> passwords and in mycase the passwords are not encrypted when
>>> running
>>>>> the
>>>>>> radtest command as "radtest krishnachaitanya *Freeip at 1234
>>>>> *122.1.5.84
>>>>>> 1812 testing123" and not sure why am seeing PAP password errors.
>>>>>> 3. and I am not sure why am seeing the messages "(0) ldap:
>>> Waiting
>>>>> for
>>>>>> search result...
>>>>>> (0) ldap: The specified DN wasn't found
>>>>>> (0) ldap: Search returned no results" when "rlm_ldap bind is
>>>>> successful".
>>>>>> Is there any relation between them?
>>>>>>
>>>>>> *Please help!*
>>>>>>
>>>>>> [Ready to process requests
>>>>>> (0) Received Access-Request Id 252 from 122.1.5.84:55576 to
>>>>> 122.1.5.84:1812
>>>>>> length 86
>>>>>> (0) User-Name = "krishnachaitanya"
>>>>>> (0) User-Password = "Freeip at 1234"
>>>>>> (0) NAS-IP-Address = 122.1.5.84
>>>>>> (0) NAS-Port = 1812
>>>>>> (0) Message-Authenticator = 0x7d7802787a4d84809dbcd42a46873fe6
>>>>>> (0) # Executing section authorize from file
>>>>> /etc/raddb/sites-enabled/default
>>>>>> (0) authorize {
>>>>>> (0) policy filter_username {
>>>>>> (0) if (&User-Name) {
>>>>>> (0) if (&User-Name) -> TRUE
>>>>>> (0) if (&User-Name) {
>>>>>> (0) if (&User-Name =~ / /) {
>>>>>> (0) if (&User-Name =~ / /) -> FALSE
>>>>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>>>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>>>>> (0) if (&User-Name =~ /\.\./ ) {
>>>>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~
>>> /@(.+)\.(.+)$/)) {
>>>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~
>>> /@(.+)\.(.+)$/))
>>>>> ->
>>>>>> FALSE
>>>>>> (0) if (&User-Name =~ /\.$/) {
>>>>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>>>>> (0) if (&User-Name =~ /@\./) {
>>>>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>>>>> (0) } # if (&User-Name) = notfound
>>>>>> (0) } # policy filter_username = notfound
>>>>>> (0) [preprocess] = ok
>>>>>> (0) [chap] = noop
>>>>>> (0) [mschap] = noop
>>>>>> (0) [digest] = noop
>>>>>> (0) suffix: Checking for suffix after "@"
>>>>>> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up
>>> realm
>>>>> NULL
>>>>>> (0) suffix: No such realm "NULL"
>>>>>> (0) [suffix] = noop
>>>>>> (0) eap: No EAP-Message, not doing EAP
>>>>>> (0) [eap] = noop
>>>>>> (0) [files] = noop
>>>>>> rlm_ldap (ldap): Reserved connection (0)
>>>>>> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
>>>>>> (0) ldap: --> (uid=krishnachaitanya)
>>>>>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
>>> Authority"
>>>>> with
>>>>>> filter "(uid=krishnachaitanya)", scope "sub"
>>>>>> (0) ldap: Waiting for search result...
>>>>>> (0) ldap: The specified DN wasn't found
>>>>>> (0) ldap: Search returned no results
>>>>>> rlm_ldap (ldap): Released connection (0)
>>>>>> Need 5 more connections to reach 10 spares
>>>>>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
>>> slots
>>>>>> used
>>>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>>>>> rlm_ldap (ldap): Waiting for bind result...
>>>>>> rlm_ldap (ldap): Bind successful
>>>>>> (0) [ldap] = notfound
>>>>>> (0) if ((ok || updated) && User-Password) {
>>>>>> (0) if ((ok || updated) && User-Password) -> FALSE
>>>>>> (0) [expiration] = noop
>>>>>> (0) [logintime] = noop
>>>>>> (0) pap: WARNING: No "known good" password found for the user. Not
>>>>> setting
>>>>>> Auth-Type
>>>>>> (0) pap: WARNING: Authentication will fail unless a "known good"
>>> password
>>>>>> is available
>>>>>> (0) [pap] = noop
>>>>>> (0) } # authorize = ok
>>>>>> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type
>>> =
>>>>>> Reject
>>>>>> (0) Failed to authenticate the user
>>>>>> (0) Using Post-Auth-Type Reject
>>>>>> (0) # Executing group from file /etc/raddb/sites-enabled/default
>>>>>> (0) Post-Auth-Type REJECT {
>>>>>> (0) attr_filter.access_reject: EXPAND %{User-Name}
>>>>>> (0) attr_filter.access_reject: --> krishnachaitanya
>>>>>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
>>>>>> (0) [attr_filter.access_reject] = updated
>>>>>> (0) [eap] = noop
>>>>>> (0) policy remove_reply_message_if_eap {
>>>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>>>>> (0) else {
>>>>>> (0) [noop] = noop
>>>>>> (0) } # else = noop
>>>>>> (0) } # policy remove_reply_message_if_eap = noop
>>>>>> (0) } # Post-Auth-Type REJECT = updated
>>>>>> (0) Delaying response for 1.000000 seconds
>>>>>> Waking up in 0.2 seconds.
>>>>>> Waking up in 0.7 seconds.
>>>>>> (0) Sending delayed response
>>>>>> (0) Sent Access-Reject Id 252 from 122.1.5.84:1812 to
>>> 122.1.5.84:55576
>>>>>> length 20
>>>>>> Waking up in 3.9 seconds.
>>>>>> (0) Cleaning up request packet ID 252 with timestamp +5
>>>>>> Ready to process requests
>>>>>>
>>>>>>
>>>>>> *Krishna Chaitanya Ala*
>>>>>> *Network and Operations Engineer*
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, 8 Jul 2022 at 16:27, Matthew Newton <mcn at freeradius.org>
>>> wrote:
>>>>>>> On 08/07/2022 11:45, Krishna Chaitanya wrote:
>>>>>>>> # search result
>>>>>>>> search: 2
>>>>>>>> result: 0 Success
>>>>>>>>
>>>>>>>> # numResponses: 3
>>>>>>>> # numEntries: 2
>>>>>>>> *(0) ldap: ERROR: Ambiguous search result, returned 2 unsorted
>>> entries
>>>>>>>> (should return 1 or 0). Enable sorting, or specify a more
>>> restrictive
>>>>>>>> base_dn, filter or scope(0) ldap: ERROR: The following entries were
>>>>>>>> returned:(0) ldap: ERROR:
>>>>>>>> uid=admin,cn=users,cn=compat,dc=qi-cap,dc=com(0) ldap: ERROR:
>>>>>>>> uid=admin,cn=users,cn=accounts,dc=qi-cap,dc=com*
>>>>>>>> rlm_ldap (ldap): Released connection (0)
>>>>>>>> Need 5 more connections to reach 10 spares
>>>>>>> Did you read the debug output?
>>>>>>>
>>>>>>> You have two users with the same uid. FreeRADIUS won't have any idea
>>>>>>> which one you want.
>>>>>>>
>>>>>>> So you need to either not use the same username twice, or configure
>>>>>>> FreeRADIUS with a more restrictive base DN so that it only finds one
>>> of
>>>>>>> them.
>>>>>>>
>>>>>>> --
>>>>>>> Matthew
>>>>>>> -
>>>>>>> List info/subscribe/unsubscribe? See
>>>>>>> http://www.freeradius.org/list/users.html
>>>>>>>
>>>>>> -
>>>>>> List info/subscribe/unsubscribe? See
>>>>> http://www.freeradius.org/list/users.html
>>>>>
>>>>>
>>>>>
>>>>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
>>> Authority"
>>>>> with
>>>>> filter "(uid=krishnachaitanya)", scope "sub"
>>>>> (0) ldap: Waiting for search result...
>>>>> (0) ldap: The specified DN wasn't found
>>>>> (0) ldap: Search returned no results
>>>>>
>>>>> The user is not found in the LDAP. Do you use uid? oder cn? Wrong part
>>> of
>>>>> the tree? Whif is the LDIF of your user?
>>>>> Can you do a manual ldapsearch for the user?
>>>>>
>>>>>
>>>>> Mit freundlichen Grüßen,
>>>>>
>>>>> --
>>>>>
>>>>> [*] sys4 AG
>>>>>
>>>>> https://sys4.de, +49 (89) 30 90 46 64
>>>>> Schleißheimer Straße 26/MG,80333 München
>>>>>
>>>>> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
>>>>> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
>>>>> Aufsichtsratsvorsitzender: Florian Kirstein
>>>>>
>>>>> -
>>>>> List info/subscribe/unsubscribe? See
>>>>> http://www.freeradius.org/list/users.html
>>>>>
>>> With ldapsearch you find the object in:
>>>
>>> dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
>>>
>>>
>>> FR searches in (from the logging):
>>>
>>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
>>> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
>>> with
>>> filter "(uid=krishnachaitanya)", scope "sub"
>>>
>>> You see the difference?
>>>
>>> Mit freundlichen Grüßen,
>>>
>>> --
>>>
>>> [*] sys4 AG
>>>
>>> https://sys4.de, +49 (89) 30 90 46 64
>>> Schleißheimer Straße 26/MG,80333 München
>>>
>>> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
>>> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
>>> Aufsichtsratsvorsitzender: Florian Kirstein
>>>
>>>
Because this client FR does not know this client. Please configure this
client in FR.
Mit freundlichen Grüßen,
--
[*] sys4 AG
https://sys4.de, +49 (89) 30 90 46 64
Schleißheimer Straße 26/MG,80333 München
Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
Aufsichtsratsvorsitzender: Florian Kirstein
More information about the Freeradius-Users
mailing list