connecting a server
Alan Buxey
alan.buxey at gmail.com
Sun Jul 17 10:40:06 UTC 2022
Hi
Los shore nothing. Its running but no clients are taking it. So, if you
have a NAS and some clients connecting to that NAS then you probably need
to check to see if eg firewall on your server needs adjusting or some other
ACLs or firewall stopping traffic from the NAS to the server
alan
On Sat, 16 Jul 2022, 16:42 Alexandro Gonçalves Dos Santos, <
AlexandroGonSan at outlook.com> wrote:
> I connected on a server but it seems that nothing happened. I use Debian.
>
> $ freeradius -X
> FreeRADIUS Version 3.0.21
> Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/3.0/dictionary
> including configuration file /etc/freeradius/3.0/radiusd.conf
> including configuration file /etc/freeradius/3.0/proxy.conf
> including configuration file /etc/freeradius/3.0/clients.conf
> including files in directory /etc/freeradius/3.0/mods-enabled/
> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> including configuration file /etc/freeradius/3.0/mods-enabled/always
> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> including configuration file /etc/freeradius/3.0/mods-enabled/sql
> including configuration file
> /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
> including configuration file
> /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> including configuration file /etc/freeradius/3.0/mods-enabled/files
> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> including configuration file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> including files in directory /etc/freeradius/3.0/policy.d/
> including configuration file /etc/freeradius/3.0/policy.d/canonicalization
> including configuration file /etc/freeradius/3.0/policy.d/accounting
> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> including configuration file /etc/freeradius/3.0/policy.d/filter
> including configuration file
> /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/3.0/policy.d/cui
> including configuration file /etc/freeradius/3.0/policy.d/operator-name
> including configuration file /etc/freeradius/3.0/policy.d/debug
> including configuration file /etc/freeradius/3.0/policy.d/control
> including configuration file /etc/freeradius/3.0/policy.d/eap
> including configuration file /etc/freeradius/3.0/policy.d/rfc7542
> including files in directory /etc/freeradius/3.0/sites-enabled/
> including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/3.0/sites-enabled/default
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> systemd watchdog is disabled
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = digest
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_always
> # Loading module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file
> /etc/freeradius/3.0/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
> detail {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_sql
> # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> sql {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = 3306
> login = "radius"
> password = <<< secret >>>
> radius_db = "radius"
> read_groups = yes
> read_profiles = yes
> read_clients = yes
> delete_stale_sessions = yes
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> client_query = "SELECT id, nasname, shortname, type, secret, server FROM
> nas"
> authorize_check_query = "SELECT id, username, attribute, value, op FROM
> radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_reply_query = "SELECT id, username, attribute, value, op FROM
> radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_group_check_query = "SELECT id, groupname, attribute, Value,
> op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
> authorize_group_reply_query = "SELECT id, groupname, attribute, value,
> op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
> group_membership_query = "SELECT groupname FROM radusergroup WHERE
> username = '%{SQL-User-Name}' ORDER BY priority"
> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> '%{SQL-User-Name}' AND acctstoptime IS NULL"
> simul_verify_query = "SELECT radacctid, acctsessionid, username,
> nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
> FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> auto_escape = no
> accounting {
> reference =
> "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
> type {
> accounting-on {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
> }
> accounting-off {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
> }
> start {
> query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username,
> realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
> acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
> connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid,
> callingstationid, acctterminatecause, servicetype, framedprotocol,
> framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid,
> delegatedipv6prefix) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
> '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
> '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
> '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
> '%{Delegated-IPv6-Prefix}')"
> }
> interim-update {
> query = "UPDATE radacct SET acctupdatetime =
> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval =
> %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
> framedipaddress = '%{Framed-IP-Address}', framedipv6address =
> '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
> framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
> '%{Delegated-IPv6-Prefix}', acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> '%{Acct-Unique-Session-Id}'"
> }
> stop {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> }
> }
> }
> post-auth {
> reference = ".query"
> query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S.%M')"
> }
> }
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> Creating attribute SQL-Group
> # Loaded module rlm_replicate
> # Loading module "replicate" from file
> /etc/freeradius/3.0/mods-enabled/replicate
> # Loaded module rlm_sqlippool
> # Loading module "sqlippool" from file
> /etc/freeradius/3.0/mods-enabled/sqlippool
> sqlippool {
> sql_module_instance = "sql"
> lease_duration = 3600
> pool_name = "Pool-Name"
> default_pool = "main_pool"
> attribute_name = "Framed-IP-Address"
> allocate_begin = "START TRANSACTION"
> allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time
> <= NOW() - INTERVAL 1 SECOND AND nasipaddress =
> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> allocate_clear_timeout = 1
> allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name =
> '%{control:Pool-Name}' AND ( expiry_time < NOW() OR expiry_time IS NULL OR
> expiry_time = 0 OR ( nasipaddress = '%{NAS-IP-Address}' AND pool_key =
> '%{NAS-Port}' ) ) ORDER BY (username <> '%{User-Name}'), (callingstationid
> <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
> allocate_update = "UPDATE radippool SET nasipaddress =
> '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
> '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() +
> INTERVAL 3600 SECOND WHERE framedipaddress = '%I'"
> allocate_commit = "COMMIT"
> pool_check = "SELECT id FROM radippool WHERE
> pool_name='%{control:Pool-Name}' LIMIT 1"
> start_begin = "START TRANSACTION"
> start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600
> SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key =
> '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> start_commit = "COMMIT"
> alive_begin = "START TRANSACTION"
> alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600
> SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND
> pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid
> = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> alive_commit = "COMMIT"
> stop_begin = "START TRANSACTION"
> stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress
> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
> AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> stop_commit = "COMMIT"
> on_begin = "START TRANSACTION"
> on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress
> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> on_commit = "COMMIT"
> off_begin = "START TRANSACTION"
> off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress
> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> off_commit = "COMMIT"
> messages {
> exists = "Existing IP: %{reply:Framed-IP-Address} (did
> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
> %{User-Name})"
> success = "Allocated IP: %{reply:Framed-IP-Address} from
> %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id}
> port %{NAS-Port} user %{User-Name})"
> clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli
> %{Calling-Station-Id} user %{User-Name})"
> failed = "IP Allocation FAILED from %{control:Pool-Name} (did
> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
> %{User-Name})"
> nopool = "No Pool-Name defined (did %{Called-Station-Id} cli
> %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
> }
> }
> # Loading module "sradutmp" from file
> /etc/freeradius/3.0/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_exec
> # Loading module "ntlm_auth" from file
> /etc/freeradius/3.0/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file
> /etc/freeradius/3.0/mods-enabled/digest
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loading module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file
> /etc/freeradius/3.0/mods-enabled/unpack
> # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
> files {
> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> }
> # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> # Loaded module rlm_linelog
> # Loading module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> instantiate {
> }
> # Instantiating module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> # Instantiating module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
> # Instantiating module "sql" from file
> /etc/freeradius/3.0/mods-enabled/sql
> rlm_sql_mysql: libmysql version: 10.5.15
> mysql {
> tls {
> tls_required = no
> check_cert = no
> check_cert_cn = no
> }
> warnings = "auto"
> }
> rlm_sql (sql): Attempting to connect to database "radius"
> rlm_sql (sql): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> rlm_sql (sql): Processing generate_sql_clients
> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
> shortname, type, secret, server FROM nas
> rlm_sql (sql): Reserved connection (0)
> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
> type, secret, server FROM nas
> rlm_sql (sql): Adding client 10.10.254.1 (Mikrotik) to global clients list
> rlm_sql (10.10.254.1): Client "Mikrotik" (sql) added
> rlm_sql (sql): Released connection (0)
> Need 5 more connections to reach 10 spares
> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> # Instantiating module "sqlippool" from file
> /etc/freeradius/3.0/mods-enabled/sqlippool
> Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout
> = 1"
> # Instantiating module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "bangpath" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
> # Instantiating module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pap" from file
> /etc/freeradius/3.0/mods-enabled/pap
> # Instantiating module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
> # Instantiating module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> # Instantiating module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> # Instantiating module "eap" from file
> /etc/freeradius/3.0/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/3.0/certs"
> pem_file_type = yes
> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> ca_file = "/etc/ssl/certs/ca-certificates.crt"
> private_key_password = <<< secret >>>
> dh_file = "/etc/freeradius/3.0/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> ecdh_curve = "prime256v1"
> disable_tlsv1 = yes
> disable_tlsv1_1 = yes
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> Please use tls_min_version and tls_max_version instead of disable_tlsv1
> Please use tls_min_version and tls_max_version instead of disable_tlsv1_2
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/3.0/radiusd.conf
> } # server
> server inner-tunnel { # from file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
> } # server inner-tunnel
> server default { # from file /etc/freeradius/3.0/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on proxy address * port 51289
> Listening on proxy address :: port 45733
> Ready to process requests
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list