FreeRadius and FreeIpa integration not working in our Lab setup
Krishna Chaitanya
krishna.chaitanya at qi-cap.com
Thu Jul 21 11:05:53 UTC 2022
FreeRADIUS: Using mschapv2 with freeipa for wireless authentication.
I am following the below links to use mschapv2 authentication to have
authenticate wireless users using FreeIPA+ Freeradius.
https://fy.blackhats.net.au/blog/html/2015/07/06/FreeIPA:_Giving_permissions_to_service_accounts..html
<goog_2039148863>
https://fy.blackhats.net.au/blog/html/2016/01/13/FreeRADIUS:_Using_mschapv2_with_freeipa.html
However, I am getting some bind errors when running radius in Debug
mode.The Debug report shows that ldap bind is unsuccessful due to invalid
credentials and am sure that bind credentials mentioned in *mods-available/ldap
*module is correct.Below is the same Debug report and module configuration.
====================================================
ldap {
# Note that this needs to match the name(s) in the LDAP server
# certificate, if you're using ldaps. See OpenLDAP documentation
# for the behavioral semantics of specifying more than one host.
#
# Depending on the libldap in use, server may be an LDAP URI.
# In the case of OpenLDAP this allows additional the following
# additional schemes:
# - ldaps:// (LDAP over SSL)
# - ldapi:// (LDAP over Unix socket)
# - ldapc:// (Connectionless LDAP)
server = '122.1.5.84'
# server = 'ldap.rrdns.example.org'
# server = 'ldap.rrdns.example.org'
# Port to connect on, defaults to 389, will be ignored for LDAP
URIs.
# port = 389
# Administrator account for searching and possibly modifying.
# If using SASL + KRB5 these should be commented out.
# identity = 'cn=admin,dc=example,dc=org'
# password = mypass
*identity = krbprincipalname=radius/radiustest.qi-cap.com at QI-CAP.COM
<radiustest.qi-cap.com at QI-CAP.COM>,cn=services,cn=accounts,dc=qi-cap,dc=compassword
= Freeip at 1234*
# Unless overridden in another section, the dn from which all
# searches will start from.
base_dn = 'cn=users,cn=accounts,dc=qi-cap,dc=com'
# attribute ref.
* update { control:Password-With-Header +=
'userPassword' control:NT-Password :=
'ntPassword'*
# reply:Reply-Message := 'radiusReplyMessage'
# reply:Tunnel-Type := 'radiusTunnelType'
# reply:Tunnel-Medium-Type := 'radiusTunnelMediumType'
# reply:Tunnel-Private-Group-ID :=
'radiusTunnelPrivategroupId'
# Where only a list is specified as the RADIUS attribute,
# the value of the LDAP attribute is parsed as a valuepair
# in the same format as the 'valuepair_attribute' (above).
control: += 'radiusControlAttribute'
request: += 'radiusRequestAttribute'
reply: += 'radiusReplyAttribute'
}
#
=====================================================
*radiusd -X*
FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/ldap
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 122.1.5.84
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client private-network {
ipaddr = 122.1.5.0/24
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
ldap {
server = "122.1.5.84"
identity = "krbprincipalname=radius/radiustest.qi-cap.com at QI-CAP.COM"
password = <<< secret >>>
sasl {
}
user_dn = "LDAP-UserDn"
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
allow_dangling_group_ref = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "cn=users,cn=accounts,dc=qi-cap,dc=com"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "mschapv2"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
instantiate {
}
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20602
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
* }rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending
slots usedrlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
<http://122.1.5.84:389>rlm_ldap (ldap): Waiting for bind result...rlm_ldap
(ldap): Bind credentials incorrect: Invalid credentialsrlm_ldap (ldap):
Opening connection failed (0)rlm_ldap (ldap): Removing connection
pool/etc/raddb/mods-enabled/ldap[8]: Instantiation failed for module
"ldap"[root at radiustest raddb]# *
====================================================================================
When I comment out *Identity and password* details in Ldap module radius
can get started in debug mode.However, below radtest with mschap type is
getting rejected.
Below is the radtest command on client and debug report on IPA server.
=======================================================================
radtest -t mschap radius Freeip at 1234 122.1.5.84:1812 0 testing123
Sent Access-Request Id 46 from 0.0.0.0:50199 to 122.1.5.84:1812 length 132
User-Name = "radius"
MS-CHAP-Password = "Freeip at 1234"
NAS-IP-Address = 127.0.1.1
NAS-Port = 0
Message-Authenticator = 0x00
Cleartext-Password = "Freeip at 1234"
MS-CHAP-Challenge = 0x8e79aa9e30a1e3ca
MS-CHAP-Response =
0x00010000000000000000000000000000000000000000000000004b0f0a7bffeafb3bb5290b7e93b6f3f44381c842bedc6786
Received Access-Reject Id 46 from 122.1.5.84:1812 to 122.1.5.136:50199
length 61
MS-CHAP-Error = "\000E=691 R=1 C=899cfc6adf2a51c4 V=2"
(0) -: Expected Access-Accept got Access-Reject
================================================================================================
(0) Received Access-Request Id 182 from 122.1.5.136:44172 to 122.1.5.84:1812
length 76
(0) User-Name = "radius"
(0) User-Password = "Freeip at 1234"
(0) NAS-IP-Address = 127.0.1.1
(0) NAS-Port = 1812
(0) Message-Authenticator = 0xefcc067a8ce57cfeb193b3298eed0b57
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "radius", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap: --> (uid=radius)
(0) ldap: Performing search in "cn=users,cn=accounts,dc=qi-cap,dc=com" with
filter "(uid=radius)", scope "sub"
(0) ldap: Waiting for search result...
(0) ldap: User object found at DN
"uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
(0) ldap: Processing user attributes
(0) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) if ((ok || updated) && User-Password) {
(0) if ((ok || updated) && User-Password) -> TRUE
(0) if ((ok || updated) && User-Password) {
(0) update {
(0) control:Auth-Type := LDAP
(0) } # update = noop
(0) } # if ((ok || updated) && User-Password) = noop
(0) [expiration] = noop
(0) [logintime] = noop
Not doing PAP as Auth-Type is already set.
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = LDAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Auth-Type LDAP {
rlm_ldap (ldap): Reserved connection (1)
(0) ldap: Login attempt by "radius"
(0) ldap: Using user DN from request
"uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
(0) ldap: Waiting for bind result...
(0) ldap: Bind successful
(0) ldap: Bind as user "uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
was successful
rlm_ldap (ldap): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots
used
rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) } # Auth-Type LDAP = ok
(0) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(0) post-auth {
(0) if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(0) if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) -> FALSE
(0) update {
(0) No attributes updated for RHS &session-state:
(0) } # update = noop
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # post-auth = noop
(0) Sent Access-Accept Id 182 from 122.1.5.84:1812 to 122.1.5.136:44172
length 0
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 182 with timestamp +4
Ready to process requests
(1) Received Access-Request Id 46 from 122.1.5.136:50199 to 122.1.5.84:1812
length 132
(1) User-Name = "radius"
(1) NAS-IP-Address = 127.0.1.1
(1) NAS-Port = 0
(1) Message-Authenticator = 0xff590ce3ed45197b4e567a6c711fb172
(1) MS-CHAP-Challenge = 0x8e79aa9e30a1e3ca
(1) MS-CHAP-Response =
0x00010000000000000000000000000000000000000000000000004b0f0a7bffeafb3bb5290b7e93b6f3f44381c842bedc6786
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
(1) [mschap] = ok
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "radius", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
(1) [files] = noop
rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 129
seconds
rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 129
seconds
rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 129
seconds
rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 125
seconds
rlm_ldap (ldap): Closing connection (5): Hit idle_timeout, was idle for 124
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 124
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (6): Hit idle_timeout, was idle for 124
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): 0 of 0 connections in use. You may need to increase
"spare"
rlm_ldap (ldap): Opening additional connection (7), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Reserved connection (7)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (uid=radius)
(1) ldap: Performing search in "cn=users,cn=accounts,dc=qi-cap,dc=com" with
filter "(uid=radius)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN
"uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
(1) ldap: Processing user attributes
(1) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (7)
Need 2 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (8), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1) [ldap] = ok
(1) if ((ok || updated) && User-Password) {
(1) if ((ok || updated) && User-Password) -> FALSE
(1) [expiration] = noop
(1) [logintime] = noop
Not doing PAP as Auth-Type is already set.
(1) [pap] = noop
(1) } # authorize = ok
(1) Found Auth-Type = mschap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) mschap: WARNING: No Cleartext-Password configured. Cannot create
NT-Password
(1) mschap: Client is using MS-CHAPv1 with NT-Password
(1) mschap: ERROR: FAILED: No NT-Password. Cannot perform authentication
(1) mschap: ERROR: MS-CHAP2-Response is incorrect
(1) [mschap] = reject
(1) } # authenticate = reject
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject: --> radius
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1) [attr_filter.access_reject] = updated
(1) [eap] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.1 seconds.
Waking up in 0.8 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 46 from 122.1.5.84:1812 to 122.1.5.136:50199
length 61
(1) MS-CHAP-Error = "\000E=691 R=1 C=899cfc6adf2a51c4 V=2"
Waking up in 3.9 seconds.
(1) Cleaning up request packet ID 46 with timestamp +129
==============================================================================
When running a normal radtest receiving an accept message and below is the
same along with debug report.
*=====================================================================================*
radtest radius Freeip at 1234 122.1.5.84 1812 testing123
User-Name = "radius"
User-Password = "Freeip at 1234"
NAS-IP-Address = 127.0.1.1
NAS-Port = 1812
Message-Authenticator = 0x00
Cleartext-Password = "Freeip at 1234"
Received Access-Accept Id 182 from 122.1.5.84:1812 to 122.1.5.136:44172
length 20
=======================================================================================
0) Received Access-Request Id 182 from 122.1.5.136:44172 to 122.1.5.84:1812
length 76
(0) User-Name = "radius"
(0) User-Password = "Freeip at 1234"
(0) NAS-IP-Address = 127.0.1.1
(0) NAS-Port = 1812
(0) Message-Authenticator = 0xefcc067a8ce57cfeb193b3298eed0b57
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "radius", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap: --> (uid=radius)
(0) ldap: Performing search in "cn=users,cn=accounts,dc=qi-cap,dc=com" with
filter "(uid=radius)", scope "sub"
(0) ldap: Waiting for search result...
(0) ldap: User object found at DN
"uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
(0) ldap: Processing user attributes
(0) ldap: WARNING: No "known good" password added. Ensure the admin user
has permission to read the password attribute
(0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory
(if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
used
rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) if ((ok || updated) && User-Password) {
(0) if ((ok || updated) && User-Password) -> TRUE
(0) if ((ok || updated) && User-Password) {
(0) update {
(0) control:Auth-Type := LDAP
(0) } # update = noop
(0) } # if ((ok || updated) && User-Password) = noop
(0) [expiration] = noop
(0) [logintime] = noop
Not doing PAP as Auth-Type is already set.
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = LDAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Auth-Type LDAP {
rlm_ldap (ldap): Reserved connection (1)
(0) ldap: Login attempt by "radius"
(0) ldap: Using user DN from request
"uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
(0) ldap: Waiting for bind result...
(0) ldap: Bind successful
(0) ldap: Bind as user "uid=radius,cn=users,cn=accounts,dc=qi-cap,dc=com"
was successful
rlm_ldap (ldap): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots
used
rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = ok
(0) } # Auth-Type LDAP = ok
(0) # Executing section post-auth from file /etc/raddb/sites-enabled/default
(0) post-auth {
(0) if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(0) if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) -> FALSE
(0) update {
(0) No attributes updated for RHS &session-state:
(0) } # update = noop
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # post-auth = noop
(0) Sent Access-Accept Id 182 from 122.1.5.84:1812 to 122.1.5.136:44172
length 0
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 182 with timestamp +4
Ready to process requests
*Thanks*
*Krishna Chaitanya Ala*
*Network and Operations Engineer*
*QI Cap Markets LLP*
*Bangalore,Karnataka*
*Slack : krishna.chaitanya at qi-cap.com <krishna.chaitanya at qi-cap.com>*
On Fri, 15 Jul 2022 at 12:22, Michael Schwartzkopff <ms at sys4.de> wrote:
> On 15.07.22 06:01, Krishna Chaitanya wrote:
> > Looks like I found the reason, the issue is because the wireless router
> is
> > not added in the cd /etc/raddb/client.conf file.
> > And I can see the radtest requests are getting accepted by the Freeradius
> > server for the user profiles on FreeIPA Directory as shown below.
> >
> ====================================================================================================
> > krishna at QICAP:~$ radtest radius Freeip at 1234 122.1.5.84 1812 testing123
> > Sent Access-Request Id 50 from 0.0.0.0:43213 to 122.1.5.84:1812 length
> 76
> > User-Name = "radius"
> > User-Password = "Freeip at 1234"
> > NAS-IP-Address = 127.0.1.1
> > NAS-Port = 1812
> > Message-Authenticator = 0x00
> > Cleartext-Password = "Freeip at 1234"
> > Received Access-Accept Id 50 from 122.1.5.84:1812 to 122.1.5.136:43213
> > length 20
> >
> ===================================================================================
> > However, when a user is trying to authenticate to wireless services,
> > getting a debug report as below and connection to wireless is failing:
> >
> ---------------------------------------------------------------------------------------------------------------------------
> > (146) Received Access-Request Id 0 from 122.1.5.89:38592 to
> 122.1.5.84:1812
> > length 125
> > (146) User-Name = "radius"
>
> (...)
>
> (154) ldap: User object found at DN
> > "uid=radius,cn=users,cn=compat,dc=qi-cap,dc=com"
> > (154) ldap: Processing user attributes
> > (154) ldap: WARNING: No "known good" password added. Ensure the admin
> user
> > has permission to read the password attribute
> > (...)
> > (154) eap_mschapv2: authenticate {
> > (154) mschap: WARNING: No Cleartext-Password configured. Cannot create
> > NT-Password
> > (154) mschap: Creating challenge hash with username: radius
> > (154) mschap: Client is using MS-CHAPv2
> > (154) mschap: ERROR: FAILED: No NT-Password. Cannot perform
> authentication
> > (154) mschap: ERROR: MS-CHAP2-Response is incorrect
> > (154) eap_mschapv2: [mschap] = reject
> > (154) eap_mschapv2: } # authenticate = reject
> (...)
> > However,just to troubleshoot, added a user profile in user config file at
> > sudo vim /etc/raddb/users and below is the same. And when trying to
> > authenticate with this test profile am able to authenticate and connect
> to
> > network (QICAP_5G-2).
> > [image: image.png]
> > So, not really sure why authentication is failing for other user profiles
> > which are not added in the user config file and that is not the expected
> > behaviour.
> > Thanks
> > Krishna
> >
> (...)
>
> read the logs. I shortened the logs to make clear the important parts.
> The truth is on the logs.
>
> or, to make it even more clear:
>
> ldap: WARNING: No "known good" password added. Ensure the admin user
> has permission to read the password attribute
>
>
> No password, no authentication.
>
>
> Given the history of our conversation on the list here, please note that
> there are a lot of competent people and companies that provide paid
> support. First of all, I would refer to https://networkradius.com
>
>
>
More information about the Freeradius-Users
mailing list