Authentication issues
Michael Schwartzkopff
ms at sys4.de
Tue Jun 21 10:08:08 UTC 2022
On 21.06.22 11:48, David le Roux wrote:
> Hello,
>
> I am still getting eap-tls authentication issues. I am using the same certificates as our old radius server (which is running fine, just very old now). What am I doing wrong? I've looked at the debug log all morning and can't figure it out.
>
> Kind regards,
>
> David le Roux
>
>
> ATTACHED RADIUS.LOG EXTRACT
>
> Mon Jun 20 20:07:11 2022 : Auth: tls: Certificate CN (mh300649.millerextra.com) does not match specified value (host/mh300649.millerextra.com)!
> Mon Jun 20 20:07:11 2022 : ERROR: (8) eap_tls: ERROR: TLS Alert write:fatal:internal error
> Mon Jun 20 20:07:11 2022 : Error: tls: TLS_accept: Error in error
>
>
> ATTACHED DEBUG LOG
>
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/3.0/dictionary
> including configuration file /etc/freeradius/3.0/radiusd.conf
> including configuration file /etc/freeradius/3.0/proxy.conf
> including configuration file /etc/freeradius/3.0/clients.conf
> including configuration file /etc/freeradius/3.0/mwanclients.conf
> including files in directory /etc/freeradius/3.0/mods-enabled/
> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> including configuration file /etc/freeradius/3.0/mods-enabled/files
> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> including configuration file /etc/freeradius/3.0/mods-enabled/always
> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> including files in directory /etc/freeradius/3.0/policy.d/
> including configuration file /etc/freeradius/3.0/policy.d/control
> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> including configuration file /etc/freeradius/3.0/policy.d/debug
> including configuration file /etc/freeradius/3.0/policy.d/operator-name
> including configuration file /etc/freeradius/3.0/policy.d/filter
> including configuration file /etc/freeradius/3.0/policy.d/cui
> including configuration file /etc/freeradius/3.0/policy.d/canonicalization
> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/3.0/policy.d/rfc7542
> including configuration file /etc/freeradius/3.0/policy.d/accounting
> including configuration file /etc/freeradius/3.0/policy.d/eap
> including files in directory /etc/freeradius/3.0/sites-enabled/
> including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/3.0/sites-enabled/mh-site
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 120
> cleanup_delay = 10
> max_requests = 80000
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
>
> ...
>
> Debugger not attached
> systemd watchdog is disabled
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
> # Loaded module rlm_detail
> # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail auth_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail reply_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
> detail {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
> files {
> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> }
> # Loading module "authorized_macs" from file /etc/freeradius/3.0/mods-enabled/files
> files authorized_macs {
> usersfile = "/etc/freeradius/3.0/authorized_macs"
> key = "%{Calling-Station-ID}"
> }
> # Loaded module rlm_exec
> # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog {
> filename = "/var/log/freeradius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/freeradius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
> # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> eap {
> default_eap_type = "tls"
> timer_expire = 600
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 80000
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> instantiate {
> }
> # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
> # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
> # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
> # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
> # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> # Instantiating module "authorized_macs" from file /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/authorized_macs
> # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
> # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
> # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/3.0/certs/millerCA/RADIUS_CA/"
> pem_file_type = yes
> private_key_file = "/etc/freeradius/3.0/certs/radius.millerextra.com.key"
> certificate_file = "/etc/freeradius/3.0/certs/radius.millerextra.com.pem"
> ca_file = "/etc/freeradius/3.0/certs/millerCA/RADIUS_CA/ca_and_crl.pem"
> dh_file = "/etc/freeradius/3.0/certs/dh"
> random_file = "/dev/urandom"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = yes
> check_all_crl = no
> check_cert_cn = "%{User-Name}"
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> check_cert_issuer = "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA"
> ecdh_curve = "prime256v1"
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
> # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
> # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/3.0/radiusd.conf
> } # server
> server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
> } # server inner-tunnel
> server mh-site { # from file /etc/freeradius/3.0/sites-enabled/mh-site
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading post-proxy {...}
> } # server mh-site
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = 10.10.251.2
> port = 1812
> }
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on auth address 10.10.251.2 port 1812 bound to server mh-site
> Listening on proxy address * port 33320
> Ready to process requests
> (1) Received Access-Request Id 0 from 10.225.186.1:55407 to 10.10.251.2:1812 length 306
> (1) User-Name = "host/mh300416.millerextra.com"
> (1) NAS-IP-Address = 0.0.0.0
> (1) NAS-Identifier = "E0-55-3D-8A-9A-D0:vap1"
> (1) Called-Station-Id = "E2-55-6D-8A-9A-D1:mhstaff"
> (1) NAS-Port-Type = Wireless-802.11
> (1) Service-Type = Framed-User
> (1) Calling-Station-Id = "B4-B0-24-D4-DF-7E"
> (1) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 48, Channel: 48"
> (1) Acct-Session-Id = "D574672A277DD053"
> (1) Acct-Multi-Session-Id = "7C418D59D18B05C5"
> (1) WLAN-Pairwise-Cipher = 1027076
> (1) WLAN-Group-Cipher = 1027076
> (1) WLAN-AKM-Suite = 1027073
> (1) Framed-MTU = 1400
> (1) EAP-Message = 0x02e3002201686f73742f6d683330303431362e6d696c6c657265787472612e636f6d
> (1) Message-Authenticator = 0x787944a8a1c6c210ccab0867ac99d70f
> (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ / /) {
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) eap: Peer sent EAP Response (code 2) ID 227 length 34
> (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (1) [eap] = ok
> (1) } # authorize = ok
> (1) Found Auth-Type = eap
> (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site
> (1) authenticate {
> (1) eap: Peer sent packet with method EAP Identity (1)
> (1) eap: Calling submodule eap_tls to process data
> (1) eap_tls: Initiating new TLS session
> (1) eap_tls: Setting verify mode to require certificate from client
> (1) eap_tls: [eaptls start] = request
> (1) eap: Sending EAP Request (code 1) ID 228 length 6
> (1) eap: EAP session adding &reply:State = 0x9aa27e309a467356
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) Post-Auth-Type sub-section not found. Ignoring.
> (1) Sent Access-Challenge Id 0 from 10.10.251.2:1812 to 10.225.186.1:55407 length 0
> (1) EAP-Message = 0x01e400060d20
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0x9aa27e309a467356d285c4b385eaaf56
> (1) Finished request
> Waking up in 9.9 seconds.
> (2) Received Access-Request Id 1 from 10.225.186.1:55407 to 10.10.251.2:1812 length 456
> (2) User-Name = "host/mh300416.millerextra.com"
> (2) NAS-IP-Address = 0.0.0.0
> (2) NAS-Identifier = "E0-55-3D-8A-9A-D0:vap1"
> (2) Called-Station-Id = "E2-55-6D-8A-9A-D1:mhstaff"
> (2) NAS-Port-Type = Wireless-802.11
> (2) Service-Type = Framed-User
> (2) Calling-Station-Id = "B4-B0-24-D4-DF-7E"
> (2) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 48, Channel: 48"
> (2) Acct-Session-Id = "D574672A277DD053"
> (2) Acct-Multi-Session-Id = "7C418D59D18B05C5"
> (2) WLAN-Pairwise-Cipher = 1027076
> (2) WLAN-Group-Cipher = 1027076
> (2) WLAN-AKM-Suite = 1027073
> (2) Framed-MTU = 1400
> (2) EAP-Message = 0x02e400a60d800000009c160303009701000093030362b0c5b590cd2daed0060639396fe1729b9fa20792efe35d3a89d224e61952ea00002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d00170018000b00020100000d001400120401050102010403050302030202060106030023000000170000ff01000100
> (2) State = 0x9aa27e309a467356d285c4b385eaaf56
> (2) Message-Authenticator = 0x547dbbe6b031745b3902f4c1890540e5
> (2) session-state: No cached attributes
> (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ / /) {
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) eap: Peer sent EAP Response (code 2) ID 228 length 166
> (2) eap: No EAP Start, assuming it's an on-going EAP conversation
> (2) [eap] = updated
> (2) [files] = noop
> (2) [expiration] = noop
> (2) [logintime] = noop
> (2) policy rewrite_calling_station_id {
> (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) {
> (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE
> (2) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) {
> (2) update request {
> (2) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
> (2) --> b4-b0-24-d4-df-7e
> (2) &Calling-Station-Id := b4-b0-24-d4-df-7e
> (2) } # update request = noop
> (2) [updated] = updated
> (2) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated
> (2) ... skipping else: Preceding "if" was taken
> (2) } # policy rewrite_calling_station_id = updated
> (2) if (!EAP-Message) {
> (2) if (!EAP-Message) -> FALSE
> (2) else {
> (2) eap: Peer sent EAP Response (code 2) ID 228 length 166
> (2) eap: No EAP Start, assuming it's an on-going EAP conversation
> (2) [eap] = updated
> (2) } # else = updated
> (2) } # authorize = updated
> (2) Found Auth-Type = eap
> (2) Found Auth-Type = eap
> (2) ERROR: Warning: Found 2 auth-types on request for user 'host/mh300416.millerextra.com'
> (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site
> (2) authenticate {
> (2) eap: Expiring EAP session with state 0x9aa27e309a467356
> (2) eap: Finished EAP session with state 0x9aa27e309a467356
> (2) eap: Previous EAP request found for state 0x9aa27e309a467356, released from the list
> (2) eap: Peer sent packet with method EAP TLS (13)
> (2) eap: Calling submodule eap_tls to process data
> (2) eap_tls: Continuing EAP-TLS
> (2) eap_tls: Peer indicated complete TLS record size will be 156 bytes
> (2) eap_tls: Got complete TLS record (156 bytes)
> (2) eap_tls: [eaptls verify] = length included
> (2) eap_tls: (other): before SSL initialization
> (2) eap_tls: TLS_accept: before SSL initialization
> (2) eap_tls: TLS_accept: before SSL initialization
> (2) eap_tls: <<< recv TLS 1.3 [length 0097]
> (2) eap_tls: TLS_accept: SSLv3/TLS read client hello
> (2) eap_tls: >>> send TLS 1.2 [length 003d]
> (2) eap_tls: TLS_accept: SSLv3/TLS write server hello
> (2) eap_tls: >>> send TLS 1.2 [length 0bd1]
> (2) eap_tls: TLS_accept: SSLv3/TLS write certificate
> (2) eap_tls: >>> send TLS 1.2 [length 00cd]
> (2) eap_tls: TLS_accept: SSLv3/TLS write key exchange
> (2) eap_tls: >>> send TLS 1.2 [length 00ed]
> (2) eap_tls: TLS_accept: SSLv3/TLS write certificate request
> (2) eap_tls: >>> send TLS 1.2 [length 0004]
> (2) eap_tls: TLS_accept: SSLv3/TLS write server done
> (2) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done
> (2) eap_tls: TLS - In Handshake Phase
> (2) eap_tls: TLS - got 3557 bytes of data
> (2) eap_tls: [eaptls process] = handled
> (2) eap: Sending EAP Request (code 1) ID 229 length 1004
> (2) eap: EAP session adding &reply:State = 0x9aa27e309b477356
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) Post-Auth-Type sub-section not found. Ignoring.
> (2) Sent Access-Challenge Id 1 from 10.10.251.2:1812 to 10.225.186.1:55407 length 0
> (2) EAP-Message = 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
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0x9aa27e309b477356d285c4b385eaaf56
> (2) Finished request
> Waking up in 9.6 seconds.
> (8) Received Access-Request Id 7 from 10.225.186.1:55407 to 10.10.251.2:1812 length 603
> (8) User-Name = "host/mh300416.millerextra.com"
> (8) NAS-IP-Address = 0.0.0.0
> (8) NAS-Identifier = "E0-55-3D-8A-9A-D0:vap1"
> (8) Called-Station-Id = "E2-55-6D-8A-9A-D1:mhstaff"
> (8) NAS-Port-Type = Wireless-802.11
> (8) Service-Type = Framed-User
> (8) Calling-Station-Id = "B4-B0-24-D4-DF-7E"
> (8) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 47, Channel: 48"
> (8) Acct-Session-Id = "D574672A277DD053"
> (8) Acct-Multi-Session-Id = "7C418D59D18B05C5"
> (8) WLAN-Pairwise-Cipher = 1027076
> (8) WLAN-Group-Cipher = 1027076
> (8) WLAN-AKM-Suite = 1027073
> (8) Framed-MTU = 1400
> (8) EAP-Message = 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
> (8) State = 0x9aa27e309c487356d285c4b385eaaf56
> (8) Message-Authenticator = 0x8078b462fcf2db13ae497a3f33785060
> (8) session-state: No cached attributes
> (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/mh-site
> (8) authorize {
> (8) policy filter_username {
> (8) if (&User-Name) {
> (8) if (&User-Name) -> TRUE
> (8) if (&User-Name) {
> (8) if (&User-Name =~ / /) {
> (8) if (&User-Name =~ / /) -> FALSE
> (8) if (&User-Name =~ /@[^@]*@/ ) {
> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (8) if (&User-Name =~ /\.\./ ) {
> (8) if (&User-Name =~ /\.\./ ) -> FALSE
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (8) if (&User-Name =~ /\.$/) {
> (8) if (&User-Name =~ /\.$/) -> FALSE
> (8) if (&User-Name =~ /@\./) {
> (8) if (&User-Name =~ /@\./) -> FALSE
> (8) } # if (&User-Name) = notfound
> (8) } # policy filter_username = notfound
> (8) [preprocess] = ok
> (8) [chap] = noop
> (8) eap: Peer sent EAP Response (code 2) ID 234 length 311
> (8) eap: No EAP Start, assuming it's an on-going EAP conversation
> (8) [eap] = updated
> (8) [files] = noop
> (8) [expiration] = noop
> (8) [logintime] = noop
> (8) policy rewrite_calling_station_id {
> (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) {
> (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) -> TRUE
> (8) if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) {
> (8) update request {
> (8) EXPAND %{tolower:%{1}-%{2}-%{3}-%{4}-%{5}-%{6}}
> (8) --> b4-b0-24-d4-df-7e
> (8) &Calling-Station-Id := b4-b0-24-d4-df-7e
> (8) } # update request = noop
> (8) [updated] = updated
> (8) } # if (&Calling-Station-Id && (&Calling-Station-Id =~ /^([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})[^0-9a-f]?([0-9a-f]{2})$/i)) = updated
> (8) ... skipping else: Preceding "if" was taken
> (8) } # policy rewrite_calling_station_id = updated
> (8) if (!EAP-Message) {
> (8) if (!EAP-Message) -> FALSE
> (8) else {
> (8) eap: Peer sent EAP Response (code 2) ID 234 length 311
> (8) eap: No EAP Start, assuming it's an on-going EAP conversation
> (8) [eap] = updated
> (8) } # else = updated
> (8) } # authorize = updated
> (8) Found Auth-Type = eap
> (8) Found Auth-Type = eap
> (8) ERROR: Warning: Found 2 auth-types on request for user 'host/mh300416.millerextra.com'
> (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/mh-site
> (8) authenticate {
> (8) eap: Expiring EAP session with state 0x9aa27e309c487356
> (8) eap: Finished EAP session with state 0x9aa27e309c487356
> (8) eap: Previous EAP request found for state 0x9aa27e309c487356, released from the list
> (8) eap: Peer sent packet with method EAP TLS (13)
> (8) eap: Calling submodule eap_tls to process data
> (8) eap_tls: Continuing EAP-TLS
> (8) eap_tls: Got final TLS record fragment (305 bytes)
> (8) eap_tls: [eaptls verify] = ok
> (8) eap_tls: Done initial handshake
> (8) eap_tls: TLS_accept: SSLv3/TLS write server done
> (8) eap_tls: <<< recv TLS 1.2 [length 0b43]
> (8) eap_tls: TLS - Creating attributes from certificate OIDs
> (8) eap_tls: TLS-Cert-Expiration := "360203235800Z"
> (8) eap_tls: TLS-Cert-Valid-Since := "111215110200Z"
> (8) eap_tls: TLS-Cert-Subject := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA"
> (8) eap_tls: TLS-Cert-Issuer := "/O=MG_TREE/OU=Organizational CA"
> (8) eap_tls: TLS-Cert-Common-Name := "Intermediate CA"
> (8) eap_tls: TLS - Creating attributes from certificate OIDs
> (8) eap_tls: TLS-Client-Cert-Serial := "4a25"
> (8) eap_tls: TLS-Client-Cert-Expiration := "361029154426Z"
> (8) eap_tls: TLS-Client-Cert-Valid-Since := "161103154426Z"
> (8) eap_tls: TLS-Client-Cert-Subject := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=mh300416.millerextra.com"
> (8) eap_tls: TLS-Client-Cert-Issuer := "/C=GB/ST=Edinburgh/L=Edinburgh/O=Miller Group Ltd/OU=Group IT/CN=Intermediate CA"
> (8) eap_tls: TLS-Client-Cert-Common-Name := "mh300416.millerextra.com"
> (8) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication"
> (8) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2"
> (8) eap_tls: EXPAND %{User-Name}
> (8) eap_tls: --> host/mh300416.millerextra.com
> (8) eap_tls: checking certificate CN (mh300416.millerextra.com) with xlat'ed value (host/mh300416.millerextra.com)
> tls: Certificate CN (mh300416.millerextra.com) does not match specified value (host/mh300416.millerextra.com)!
> (8) eap_tls: >>> send TLS 1.2 [length 0002]
> (8) eap_tls: ERROR: TLS Alert write:fatal:internal error
> tls: TLS_accept: Error in error
> (8) eap_tls: ERROR: Failed in __FUNCTION__ (SSL_read): error:1417C086:SSL routines:tls_process_client_certificate:certificate verify failed
> (8) eap_tls: ERROR: System call (I/O) error (-1)
> (8) eap_tls: ERROR: TLS receive handshake failed during operation
> (8) eap_tls: ERROR: [eaptls process] = fail
> (8) eap:
> (8) eap: Sending EAP Failure (code 4) ID 234 length 4
> (8) eap: Failed in EAP select
> (8) [eap] = invalid
> (8) } # authenticate = invalid
> (8) Failed to authenticate the user
> (8) Using Post-Auth-Type Reject
> (8) Post-Auth-Type sub-section not found. Ignoring.
> (8) Delaying response for 1.000000 seconds
> ________________________________
>
>
> Miller Homes Limited Registered in Scotland - SC255429
> 2 Lochside View, Edinburgh Park, Edinburgh, EH12 9DH
>
> Disclaimer: The Information in this e-mail is confidential and for use by the addressee(s) only. It may also be privileged. If you are not the intended recipient please notify us immediately on +44 (0) 870 336 5000 and delete the message from your computer: you may not copy or forward it, or use or disclose its contents to any other person. We do not accept any liability or responsibility for: (1) changes made to this email after it was sent, or (2) viruses transmitted through this email or any attachment.
>
> Miller Homes Limited <https://www.millerhomes.co.uk>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
It is quite obvious. Your host sends its User-Name "host/mh300..." but
the certificate certifies the CN="mh300...". These are not the same.
Thus authentication fails.
You have to configure your new RADIUS server to ignore the "host/" realm.
Mit freundlichen Grüßen,
--
[*] sys4 AG
https://sys4.de, +49 (89) 30 90 46 64
Schleißheimer Straße 26/MG,80333 München
Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
Aufsichtsratsvorsitzender: Florian Kirstein
More information about the Freeradius-Users
mailing list