FreeRADIUS and Active Directory: Access-Reject

[White, Daniel E. (GSFC-770.0)[AEGIS]]

I am attaching the entire output captured from “radiusd -X”
Here is the important parts:

RHEL 8.5
Trying to talk to Active Directory with LDAP

My Microsoft SME says AD will never hand back a password.
How do I get RADIUS to hand the password to AD  ?

(0) Received Access-Request Id 70 from 127.0.0.1:53801 to 127.0.0.1:1812 length 74
(0)   User-Name = "demo"
(0)   User-Password = <<User Password>>
(0)   NAS-IP-Address = <<local host IP>>
(0)   NAS-Port = 0
(0)   Message-Authenticator = 0x590d9fc4e81ec118e32a67ad6fea50ca
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "demo", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0)     [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(0) ldap: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})
(0) ldap:    --> (sAMAccountName=demo)
(0) ldap: Performing search in "OU=USERS,DC=dc1,DC=dc2,DC=dc3,DC=dc4" with filter "(sAMAccountName=demo)", scope "sub"
(0) ldap: Waiting for search result...
(0) ldap: User object found at DN "CN=Demo,OU=USERGROUP,OU=USERS,DC=dc1,DC=dc2,DC=dc3,DC=dc4"
(0) ldap: Processing user attributes
(0) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute
(0) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldap://AD-DC-1:389 ldap://AD-DC-2:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0)     [ldap] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: WARNING: No "known good" password found for the user.  Not setting Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password is available
(0)     [pap] = noop
(0)   } # authorize = ok
(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   Post-Auth-Type REJECT {
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject:    --> demo
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0)     [attr_filter.access_reject] = updated
(0)     [eap] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 70 from 127.0.0.1:1812 to 127.0.0.1:53801 length 20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 70 with timestamp +7
Ready to process requests
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: console-output.txt
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20220525/96d19bb2/attachment-0001.txt>