Computer/Machine Authentication almost working..
Kristofer Hallin
kristofer at sunet.se
Mon Apr 3 13:28:12 UTC 2023
> On 3 Apr 2023, at 15:20, Tim ODriscoll <tim.odriscoll at lambrookschool.co.uk> wrote:
>
> Dear All,
>
> I'm nearly there (I think) getting machine auth working via ntlm_auth, but after following the documentation from both FR and the Samba Wiki, ntlm_auth isn't authenticating and giving me an error:
>
> (7) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'
>
> ntlm_auth is able to strip out the machine name correctly:
> (7) mschap: EXPAND --username=%{mschap:User-Name}
> (7) mschap: --> --username=SL-6S4BBS3$
>
> wbinfo tells me it's connected OK:
> # wbinfo -t
> checking the trust secret for domain MYDOMAIN via RPC calls succeeded
> # wbinfo -p
> Ping to winbindd succeeded
>
> The winbindd_privilege directory is correct:
> # ls -ld /var/lib/samba/winbindd_privileged/
> drwxr-x---+ 2 root radiusd 18 Apr 1 21:39 /var/lib/samba/winbindd_privileged/
>
> Samba's config has this on the member (FR) server and all the DCs:
> ntlm auth = mschapv2-and-ntlmv2-only
>
> I understand ntlm_auth isn't supposed to be used on the CLI, so how can I test any further?
>
Where did you get that from? ntlm_auth works just fine from the terminal:
# ntlm_auth --username=testuser
Password:
NT_STATUS_OK: The operation completed successfully. (0x0)
> Many thanks,
>
> Tim
>
> Full logs:
> FreeRADIUS Version 3.2.2
> Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/raddb/dictionary
> including configuration file /etc/raddb/radiusd.conf
> including configuration file /etc/raddb/proxy.conf
> including configuration file /etc/raddb/clients.conf
> including files in directory /etc/raddb/mods-enabled/
> including configuration file /etc/raddb/mods-enabled/always
> including configuration file /etc/raddb/mods-enabled/attr_filter
> including configuration file /etc/raddb/mods-enabled/chap
> including configuration file /etc/raddb/mods-enabled/date
> including configuration file /etc/raddb/mods-enabled/detail
> including configuration file /etc/raddb/mods-enabled/detail.log
> including configuration file /etc/raddb/mods-enabled/digest
> including configuration file /etc/raddb/mods-enabled/dynamic_clients
> including configuration file /etc/raddb/mods-enabled/eap
> including configuration file /etc/raddb/mods-enabled/echo
> including configuration file /etc/raddb/mods-enabled/exec
> including configuration file /etc/raddb/mods-enabled/expiration
> including configuration file /etc/raddb/mods-enabled/expr
> including configuration file /etc/raddb/mods-enabled/files
> including configuration file /etc/raddb/mods-enabled/linelog
> including configuration file /etc/raddb/mods-enabled/logintime
> including configuration file /etc/raddb/mods-enabled/mschap
> including configuration file /etc/raddb/mods-enabled/ntlm_auth
> including configuration file /etc/raddb/mods-enabled/pap
> including configuration file /etc/raddb/mods-enabled/passwd
> including configuration file /etc/raddb/mods-enabled/preprocess
> including configuration file /etc/raddb/mods-enabled/radutmp
> including configuration file /etc/raddb/mods-enabled/realm
> including configuration file /etc/raddb/mods-enabled/replicate
> including configuration file /etc/raddb/mods-enabled/soh
> including configuration file /etc/raddb/mods-enabled/sradutmp
> including configuration file /etc/raddb/mods-enabled/unix
> including configuration file /etc/raddb/mods-enabled/unpack
> including configuration file /etc/raddb/mods-enabled/utf8
> including configuration file /etc/raddb/mods-enabled/ldap
> including configuration file /etc/raddb/mods-enabled/totp
> including files in directory /etc/raddb/policy.d/
> including configuration file /etc/raddb/policy.d/accounting
> including configuration file /etc/raddb/policy.d/dhcp
> including configuration file /etc/raddb/policy.d/eap
> including configuration file /etc/raddb/policy.d/filter
> including configuration file /etc/raddb/policy.d/ad_machine_auth
> including configuration file /etc/raddb/policy.d/abfab-tr
> including configuration file /etc/raddb/policy.d/canonicalization
> including configuration file /etc/raddb/policy.d/control
> including configuration file /etc/raddb/policy.d/cui
> including configuration file /etc/raddb/policy.d/debug
> including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
> including configuration file /etc/raddb/policy.d/operator-name
> including configuration file /etc/raddb/policy.d/rfc7542
> including files in directory /etc/raddb/sites-enabled/
> including configuration file /etc/raddb/sites-enabled/default
> including configuration file /etc/raddb/sites-enabled/inner-tunnel
> main {
> security {
> allow_core_dumps = no
> }
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> libdir = "/usr/lib64/freeradius"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> postauth_client_lost = no
> pidfile = "/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> allow_vulnerable_openssl = "no"
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> nonblock = no
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> recv_coa {
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client 192.168.4.0/24 {
> ipaddr = 192.168.4.0/24
> require_message_authenticator = no
> secret = <<< secret >>>
> shortname = "wifi_APs"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> systemd watchdog is disabled
> # Creating Auth-Type = mschap
> # Creating Auth-Type = digest
> # Creating Auth-Type = ldap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.coa {
> filename = "/etc/raddb/mods-config/attr_filter/coa"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
> # Loaded module rlm_date
> # Loading module "date" from file /etc/raddb/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
> date wispr2date {
> format = "%Y-%m-%dT%H:%M:%S"
> utc = no
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
> detail {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "peap"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/raddb/mods-enabled/files
> files {
> filename = "/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/var/log/radius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/radius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --allow-mschapv2 --domain=MYDOMAIN --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/usr/bin/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/var/log/radius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
> # Loaded module rlm_ldap
> # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
> ldap {
> server = "ldaps://DC01.MYDOMAIN.co.uk"
> identity = "cn=MYADMIN,cn=users,dc=MYDOMAIN,dc=co,dc=uk"
> password = <<< secret >>>
> sasl {
> }
> user_dn = "LDAP-UserDn"
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=group)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> allow_dangling_group_ref = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "dc=MYDOMAIN,dc=co,dc=uk"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> ca_file = "/etc/ssl/certs/dc01.pem"
> start_tls = no
> }
> }
> Creating attribute LDAP-Group
> # Loaded module rlm_totp
> # Loading module "totp" from file /etc/raddb/mods-enabled/totp
> instantiate {
> }
> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
> # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
> # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
> # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
> # Instantiating module "attr_filter.coa" from file /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/coa
> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
> # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/etc/raddb/certs/server.pem"
> certificate_file = "/etc/raddb/certs/server.pem"
> ca_file = "/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> dh_file = "/etc/raddb/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 0
> cipher_list = "PROFILE=SYSTEM"
> cipher_server_preference = no
> reject_unknown_intermediate_ca = no
> ecdh_curve = "prime256v1"
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer necessary.
> tls: You should comment out the 'dh_file' configuration item.
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = yes
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
> reading pairlist file /etc/raddb/mods-config/files/authorize
> reading pairlist file /etc/raddb/mods-config/files/accounting
> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
> # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
> # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /etc/raddb/mods-config/preprocess/hints
> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20602
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/raddb/radiusd.conf
> } # server
> server default { # from file /etc/raddb/sites-enabled/default
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
> } # server default
> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> Compiling Auth-Type LDAP for attr Auth-Type
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 60410
> Listening on proxy address :: port 59954
> Ready to process requests
> (0) Received Access-Request Id 202 from 192.168.4.183:40744 to 192.168.15.22:1812 length 250
> (0) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (0) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (0) NAS-Port-Type = Wireless-802.11
> (0) Service-Type = Framed-User
> (0) NAS-Port = 1
> (0) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (0) Connect-Info = "CONNECT 54Mbps 802.11a"
> (0) Acct-Session-Id = "7AF5DECDA3D1020E"
> (0) WLAN-Pairwise-Cipher = 1027076
> (0) WLAN-Group-Cipher = 1027076
> (0) WLAN-AKM-Suite = 1027073
> (0) Framed-MTU = 1400
> (0) EAP-Message = 0x02e0002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (0) Message-Authenticator = 0x45339dcf5ff0be628a0d52434270ef14
> (0) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: Peer sent EAP Response (code 2) ID 224 length 41
> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = eap
> (0) # Executing group from file /etc/raddb/sites-enabled/default
> (0) authenticate {
> (0) eap: Peer sent packet with method EAP Identity (1)
> (0) eap: Calling submodule eap_peap to process data
> (0) eap_peap: (TLS) Initiating new session
> (0) eap: Sending EAP Request (code 1) ID 225 length 6
> (0) eap: EAP session adding &reply:State = 0xa2f91851a21801a2
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Using Post-Auth-Type Challenge
> (0) # Executing group from file /etc/raddb/sites-enabled/default
> (0) Challenge { ... } # empty sub-section is ignored
> (0) session-state: Saving cached attributes
> (0) Framed-MTU = 994
> (0) Sent Access-Challenge Id 202 from 192.168.15.22:1812 to 192.168.4.183:40744 length 64
> (0) EAP-Message = 0x01e100061920
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0xa2f91851a21801a2ba9496e09aa2d64c
> (0) Finished request
> Waking up in 4.9 seconds.
> (1) Received Access-Request Id 203 from 192.168.4.183:40744 to 192.168.15.22:1812 length 490
> (1) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (1) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (1) NAS-Port-Type = Wireless-802.11
> (1) Service-Type = Framed-User
> (1) NAS-Port = 1
> (1) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (1) Connect-Info = "CONNECT 54Mbps 802.11a"
> (1) Acct-Session-Id = "7AF5DECDA3D1020E"
> (1) WLAN-Pairwise-Cipher = 1027076
> (1) WLAN-Group-Cipher = 1027076
> (1) WLAN-AKM-Suite = 1027073
> (1) Framed-MTU = 1400
> (1) EAP-Message = 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
> (1) State = 0xa2f91851a21801a2ba9496e09aa2d64c
> (1) Message-Authenticator = 0x30f9339b97df8bdf7f26f3b7d10837b2
> (1) Restoring &session-state
> (1) &session-state:Framed-MTU = 994
> (1) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ / /) {
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) [digest] = noop
> (1) suffix: Checking for suffix after "@"
> (1) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (1) suffix: No such realm "NULL"
> (1) [suffix] = noop
> (1) eap: Peer sent EAP Response (code 2) ID 225 length 261
> (1) eap: Continuing tunnel setup
> (1) [eap] = ok
> (1) } # authorize = ok
> (1) Found Auth-Type = eap
> (1) # Executing group from file /etc/raddb/sites-enabled/default
> (1) authenticate {
> (1) eap: Expiring EAP session with state 0xa2f91851a21801a2
> (1) eap: Finished EAP session with state 0xa2f91851a21801a2
> (1) eap: Previous EAP request found for state 0xa2f91851a21801a2, released from the list
> (1) eap: Peer sent packet with method EAP PEAP (25)
> (1) eap: Calling submodule eap_peap to process data
> (1) eap_peap: (TLS) EAP Peer says that the final record size will be 251 bytes
> (1) eap_peap: (TLS) EAP Got all data (251 bytes)
> (1) eap_peap: (TLS) Handshake state - before SSL initialization
> (1) eap_peap: (TLS) Handshake state - Server before SSL initialization
> (1) eap_peap: (TLS) Handshake state - Server before SSL initialization
> (1) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello
> (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello
> (1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello
> (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello
> (1) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate
> (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate
> (1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
> (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange
> (1) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone
> (1) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
> (1) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done
> (1) eap_peap: (TLS) In Handshake Phase
> (1) eap: Sending EAP Request (code 1) ID 226 length 1004
> (1) eap: EAP session adding &reply:State = 0xa2f91851a31b01a2
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) # Executing group from file /etc/raddb/sites-enabled/default
> (1) Challenge { ... } # empty sub-section is ignored
> (1) session-state: Saving cached attributes
> (1) Framed-MTU = 994
> (1) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (1) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (1) Sent Access-Challenge Id 203 from 192.168.15.22:1812 to 192.168.4.183:40744 length 1068
> (1) EAP-Message = 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
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0xa2f91851a31b01a2ba9496e09aa2d64c
> (1) Finished request
> Waking up in 4.9 seconds.
> (2) Received Access-Request Id 204 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233
> (2) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (2) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (2) NAS-Port-Type = Wireless-802.11
> (2) Service-Type = Framed-User
> (2) NAS-Port = 1
> (2) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (2) Connect-Info = "CONNECT 54Mbps 802.11a"
> (2) Acct-Session-Id = "7AF5DECDA3D1020E"
> (2) WLAN-Pairwise-Cipher = 1027076
> (2) WLAN-Group-Cipher = 1027076
> (2) WLAN-AKM-Suite = 1027073
> (2) Framed-MTU = 1400
> (2) EAP-Message = 0x02e200061900
> (2) State = 0xa2f91851a31b01a2ba9496e09aa2d64c
> (2) Message-Authenticator = 0xfea378d7277662d4cec6efee65f205db
> (2) Restoring &session-state
> (2) &session-state:Framed-MTU = 994
> (2) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (2) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (2) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ / /) {
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) [digest] = noop
> (2) suffix: Checking for suffix after "@"
> (2) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) [suffix] = noop
> (2) eap: Peer sent EAP Response (code 2) ID 226 length 6
> (2) eap: Continuing tunnel setup
> (2) [eap] = ok
> (2) } # authorize = ok
> (2) Found Auth-Type = eap
> (2) # Executing group from file /etc/raddb/sites-enabled/default
> (2) authenticate {
> (2) eap: Expiring EAP session with state 0xa2f91851a31b01a2
> (2) eap: Finished EAP session with state 0xa2f91851a31b01a2
> (2) eap: Previous EAP request found for state 0xa2f91851a31b01a2, released from the list
> (2) eap: Peer sent packet with method EAP PEAP (25)
> (2) eap: Calling submodule eap_peap to process data
> (2) eap_peap: (TLS) Peer ACKed our handshake fragment
> (2) eap: Sending EAP Request (code 1) ID 227 length 1000
> (2) eap: EAP session adding &reply:State = 0xa2f91851a01a01a2
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) # Executing group from file /etc/raddb/sites-enabled/default
> (2) Challenge { ... } # empty sub-section is ignored
> (2) session-state: Saving cached attributes
> (2) Framed-MTU = 994
> (2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (2) Sent Access-Challenge Id 204 from 192.168.15.22:1812 to 192.168.4.183:40744 length 1064
> (2) EAP-Message = 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
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0xa2f91851a01a01a2ba9496e09aa2d64c
> (2) Finished request
> Waking up in 4.9 seconds.
> (3) Received Access-Request Id 205 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233
> (3) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (3) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (3) NAS-Port-Type = Wireless-802.11
> (3) Service-Type = Framed-User
> (3) NAS-Port = 1
> (3) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (3) Connect-Info = "CONNECT 54Mbps 802.11a"
> (3) Acct-Session-Id = "7AF5DECDA3D1020E"
> (3) WLAN-Pairwise-Cipher = 1027076
> (3) WLAN-Group-Cipher = 1027076
> (3) WLAN-AKM-Suite = 1027073
> (3) Framed-MTU = 1400
> (3) EAP-Message = 0x02e300061900
> (3) State = 0xa2f91851a01a01a2ba9496e09aa2d64c
> (3) Message-Authenticator = 0xb714bedc489537ab5e91cc8e6bad6172
> (3) Restoring &session-state
> (3) &session-state:Framed-MTU = 994
> (3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (3) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (3) authorize {
> (3) policy filter_username {
> (3) if (&User-Name) {
> (3) if (&User-Name) -> TRUE
> (3) if (&User-Name) {
> (3) if (&User-Name =~ / /) {
> (3) if (&User-Name =~ / /) -> FALSE
> (3) if (&User-Name =~ /@[^@]*@/ ) {
> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (3) if (&User-Name =~ /\.\./ ) {
> (3) if (&User-Name =~ /\.\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (3) if (&User-Name =~ /\.$/) {
> (3) if (&User-Name =~ /\.$/) -> FALSE
> (3) if (&User-Name =~ /@\./) {
> (3) if (&User-Name =~ /@\./) -> FALSE
> (3) } # if (&User-Name) = notfound
> (3) } # policy filter_username = notfound
> (3) [preprocess] = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) [digest] = noop
> (3) suffix: Checking for suffix after "@"
> (3) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (3) suffix: No such realm "NULL"
> (3) [suffix] = noop
> (3) eap: Peer sent EAP Response (code 2) ID 227 length 6
> (3) eap: Continuing tunnel setup
> (3) [eap] = ok
> (3) } # authorize = ok
> (3) Found Auth-Type = eap
> (3) # Executing group from file /etc/raddb/sites-enabled/default
> (3) authenticate {
> (3) eap: Expiring EAP session with state 0xa2f91851a01a01a2
> (3) eap: Finished EAP session with state 0xa2f91851a01a01a2
> (3) eap: Previous EAP request found for state 0xa2f91851a01a01a2, released from the list
> (3) eap: Peer sent packet with method EAP PEAP (25)
> (3) eap: Calling submodule eap_peap to process data
> (3) eap_peap: (TLS) Peer ACKed our handshake fragment
> (3) eap: Sending EAP Request (code 1) ID 228 length 804
> (3) eap: EAP session adding &reply:State = 0xa2f91851a11d01a2
> (3) [eap] = handled
> (3) } # authenticate = handled
> (3) Using Post-Auth-Type Challenge
> (3) # Executing group from file /etc/raddb/sites-enabled/default
> (3) Challenge { ... } # empty sub-section is ignored
> (3) session-state: Saving cached attributes
> (3) Framed-MTU = 994
> (3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (3) Sent Access-Challenge Id 205 from 192.168.15.22:1812 to 192.168.4.183:40744 length 868
> (3) EAP-Message = 0x01e4032419006d62726f6f6b205363686f6f6c312b302906092a864886f70d010901161c737570706f7274406c616d62726f6f6b7363686f6f6c2e636f2e756b3114301206035504030c0b4c616d62726f6f6b20434182147f171038d791383a6c25cf29f494f6dfc907b42d300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b05000382010100849ca542ec2d6cfb37af8c4529b8d6a86d9c966170ebd7847133c6066fc1ae7d8114884d79888c9e5c32bc5f350c870f36fd15a4746a58a70e7703cb340341bd5b08a4db19e2e5f56c14edb844baf3a4f5db34f393a970c1641d05c8d117e17c063f92ddc535963bdacf1b3bff4b5a8012b54596e4747d29f8da2ee233f7a8e649ac85102def9800ce6b6b89e7e613b107e59acaffae0a9ff5eadd8551cf173ceb0ec9cfc0414f516ec35ef73597
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> (3) State = 0xa2f91851a11d01a2ba9496e09aa2d64c
> (3) Finished request
> Waking up in 4.9 seconds.
> (4) Received Access-Request Id 206 from 192.168.4.183:40744 to 192.168.15.22:1812 length 363
> (4) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (4) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (4) NAS-Port-Type = Wireless-802.11
> (4) Service-Type = Framed-User
> (4) NAS-Port = 1
> (4) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (4) Connect-Info = "CONNECT 54Mbps 802.11a"
> (4) Acct-Session-Id = "7AF5DECDA3D1020E"
> (4) WLAN-Pairwise-Cipher = 1027076
> (4) WLAN-Group-Cipher = 1027076
> (4) WLAN-AKM-Suite = 1027073
> (4) Framed-MTU = 1400
> (4) EAP-Message = 0x02e4008819800000007e1603030046100000424104fc700b1b8bfa32368426118e9a80c3f39ff815218590aed58e2c75581537f83192c25765f7180aee560c91d163e877dc0c291383f8b81220fe3e6f7575208c681403030001011603030028000000000000000018c81880c82d0c93acf0f409f08a98d6f7cdb13357292280e9ea23dce17c1c1f
> (4) State = 0xa2f91851a11d01a2ba9496e09aa2d64c
> (4) Message-Authenticator = 0xf11fb09ed5dab5550ed5f5cb3162d479
> (4) Restoring &session-state
> (4) &session-state:Framed-MTU = 994
> (4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (4) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (4) authorize {
> (4) policy filter_username {
> (4) if (&User-Name) {
> (4) if (&User-Name) -> TRUE
> (4) if (&User-Name) {
> (4) if (&User-Name =~ / /) {
> (4) if (&User-Name =~ / /) -> FALSE
> (4) if (&User-Name =~ /@[^@]*@/ ) {
> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (4) if (&User-Name =~ /\.\./ ) {
> (4) if (&User-Name =~ /\.\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (4) if (&User-Name =~ /\.$/) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /@\./) -> FALSE
> (4) } # if (&User-Name) = notfound
> (4) } # policy filter_username = notfound
> (4) [preprocess] = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) [digest] = noop
> (4) suffix: Checking for suffix after "@"
> (4) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (4) suffix: No such realm "NULL"
> (4) [suffix] = noop
> (4) eap: Peer sent EAP Response (code 2) ID 228 length 136
> (4) eap: Continuing tunnel setup
> (4) [eap] = ok
> (4) } # authorize = ok
> (4) Found Auth-Type = eap
> (4) # Executing group from file /etc/raddb/sites-enabled/default
> (4) authenticate {
> (4) eap: Expiring EAP session with state 0xa2f91851a11d01a2
> (4) eap: Finished EAP session with state 0xa2f91851a11d01a2
> (4) eap: Previous EAP request found for state 0xa2f91851a11d01a2, released from the list
> (4) eap: Peer sent packet with method EAP PEAP (25)
> (4) eap: Calling submodule eap_peap to process data
> (4) eap_peap: (TLS) EAP Peer says that the final record size will be 126 bytes
> (4) eap_peap: (TLS) EAP Got all data (126 bytes)
> (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
> (4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
> (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange
> (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec
> (4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished
> (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished
> (4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec
> (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec
> (4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished
> (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished
> (4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully
> (4) eap_peap: (TLS) Connection Established
> (4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (4) eap_peap: TLS-Session-Version = "TLS 1.2"
> (4) eap: Sending EAP Request (code 1) ID 229 length 57
> (4) eap: EAP session adding &reply:State = 0xa2f91851a61c01a2
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Using Post-Auth-Type Challenge
> (4) # Executing group from file /etc/raddb/sites-enabled/default
> (4) Challenge { ... } # empty sub-section is ignored
> (4) session-state: Saving cached attributes
> (4) Framed-MTU = 994
> (4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (4) TLS-Session-Version = "TLS 1.2"
> (4) Sent Access-Challenge Id 206 from 192.168.15.22:1812 to 192.168.4.183:40744 length 115
> (4) EAP-Message = 0x01e50039190014030300010116030300280292373b404e0822b6ddf83ac8081a30eb64150d72404bab3ca5526bb2d137e1875654b13c8fff88
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0xa2f91851a61c01a2ba9496e09aa2d64c
> (4) Finished request
> Waking up in 4.9 seconds.
> (0) Cleaning up request packet ID 202 with timestamp +13 due to cleanup_delay was reached
> (1) Cleaning up request packet ID 203 with timestamp +13 due to cleanup_delay was reached
> (2) Cleaning up request packet ID 204 with timestamp +13 due to cleanup_delay was reached
> (3) Cleaning up request packet ID 205 with timestamp +13 due to cleanup_delay was reached
> (4) Cleaning up request packet ID 206 with timestamp +13 due to cleanup_delay was reached
> Ready to process requests
> (5) Received Access-Request Id 207 from 192.168.4.183:40744 to 192.168.15.22:1812 length 233
> (5) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (5) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (5) NAS-Port-Type = Wireless-802.11
> (5) Service-Type = Framed-User
> (5) NAS-Port = 1
> (5) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (5) Connect-Info = "CONNECT 54Mbps 802.11a"
> (5) Acct-Session-Id = "7AF5DECDA3D1020E"
> (5) WLAN-Pairwise-Cipher = 1027076
> (5) WLAN-Group-Cipher = 1027076
> (5) WLAN-AKM-Suite = 1027073
> (5) Framed-MTU = 1400
> (5) EAP-Message = 0x02e500061900
> (5) State = 0xa2f91851a61c01a2ba9496e09aa2d64c
> (5) Message-Authenticator = 0x1d3e1b0836f981270aa2af2af7314781
> (5) Restoring &session-state
> (5) &session-state:Framed-MTU = 994
> (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (5) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (5) &session-state:TLS-Session-Version = "TLS 1.2"
> (5) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (5) authorize {
> (5) policy filter_username {
> (5) if (&User-Name) {
> (5) if (&User-Name) -> TRUE
> (5) if (&User-Name) {
> (5) if (&User-Name =~ / /) {
> (5) if (&User-Name =~ / /) -> FALSE
> (5) if (&User-Name =~ /@[^@]*@/ ) {
> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (5) if (&User-Name =~ /\.\./ ) {
> (5) if (&User-Name =~ /\.\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (5) if (&User-Name =~ /\.$/) {
> (5) if (&User-Name =~ /\.$/) -> FALSE
> (5) if (&User-Name =~ /@\./) {
> (5) if (&User-Name =~ /@\./) -> FALSE
> (5) } # if (&User-Name) = notfound
> (5) } # policy filter_username = notfound
> (5) [preprocess] = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) [digest] = noop
> (5) suffix: Checking for suffix after "@"
> (5) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (5) suffix: No such realm "NULL"
> (5) [suffix] = noop
> (5) eap: Peer sent EAP Response (code 2) ID 229 length 6
> (5) eap: Continuing tunnel setup
> (5) [eap] = ok
> (5) } # authorize = ok
> (5) Found Auth-Type = eap
> (5) # Executing group from file /etc/raddb/sites-enabled/default
> (5) authenticate {
> (5) eap: Expiring EAP session with state 0xa2f91851a61c01a2
> (5) eap: Finished EAP session with state 0xa2f91851a61c01a2
> (5) eap: Previous EAP request found for state 0xa2f91851a61c01a2, released from the list
> (5) eap: Peer sent packet with method EAP PEAP (25)
> (5) eap: Calling submodule eap_peap to process data
> (5) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is finished
> (5) eap_peap: Session established. Decoding tunneled attributes
> (5) eap_peap: PEAP state TUNNEL ESTABLISHED
> (5) eap: Sending EAP Request (code 1) ID 230 length 40
> (5) eap: EAP session adding &reply:State = 0xa2f91851a71f01a2
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Using Post-Auth-Type Challenge
> (5) # Executing group from file /etc/raddb/sites-enabled/default
> (5) Challenge { ... } # empty sub-section is ignored
> (5) session-state: Saving cached attributes
> (5) Framed-MTU = 994
> (5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (5) TLS-Session-Version = "TLS 1.2"
> (5) Sent Access-Challenge Id 207 from 192.168.15.22:1812 to 192.168.4.183:40744 length 98
> (5) EAP-Message = 0x01e600281900170303001d0292373b404e0823111eedee248c54e45d29e31b55efe08388ffb49d22
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0xa2f91851a71f01a2ba9496e09aa2d64c
> (5) Finished request
> Waking up in 4.9 seconds.
> (6) Received Access-Request Id 208 from 192.168.4.183:40744 to 192.168.15.22:1812 length 299
> (6) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (6) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (6) NAS-Port-Type = Wireless-802.11
> (6) Service-Type = Framed-User
> (6) NAS-Port = 1
> (6) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (6) Connect-Info = "CONNECT 54Mbps 802.11a"
> (6) Acct-Session-Id = "7AF5DECDA3D1020E"
> (6) WLAN-Pairwise-Cipher = 1027076
> (6) WLAN-Group-Cipher = 1027076
> (6) WLAN-AKM-Suite = 1027073
> (6) Framed-MTU = 1400
> (6) EAP-Message = 0x02e600481900170303003d000000000000000126dac151e748c5a28bcdde71e8e363af45675c1edb834d7414a4bafc3252d3c375b7322505386e598cbb1913ce51ffdf55ace14beb
> (6) State = 0xa2f91851a71f01a2ba9496e09aa2d64c
> (6) Message-Authenticator = 0x5570ed7a63c1c77a44a515eb23753651
> (6) Restoring &session-state
> (6) &session-state:Framed-MTU = 994
> (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (6) &session-state:TLS-Session-Version = "TLS 1.2"
> (6) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ / /) {
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) [preprocess] = ok
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) [digest] = noop
> (6) suffix: Checking for suffix after "@"
> (6) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (6) suffix: No such realm "NULL"
> (6) [suffix] = noop
> (6) eap: Peer sent EAP Response (code 2) ID 230 length 72
> (6) eap: Continuing tunnel setup
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = eap
> (6) # Executing group from file /etc/raddb/sites-enabled/default
> (6) authenticate {
> (6) eap: Expiring EAP session with state 0xa2f91851a71f01a2
> (6) eap: Finished EAP session with state 0xa2f91851a71f01a2
> (6) eap: Previous EAP request found for state 0xa2f91851a71f01a2, released from the list
> (6) eap: Peer sent packet with method EAP PEAP (25)
> (6) eap: Calling submodule eap_peap to process data
> (6) eap_peap: (TLS) EAP Done initial handshake
> (6) eap_peap: Session established. Decoding tunneled attributes
> (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
> (6) eap_peap: Identity - host/SL-6S4BBS3.MYDOMAIN.co.uk
> (6) eap_peap: Got inner identity 'host/SL-6S4BBS3.MYDOMAIN.co.uk'
> (6) eap_peap: Setting default EAP type for tunneled EAP session
> (6) eap_peap: Got tunneled request
> (6) eap_peap: EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (6) eap_peap: Setting User-Name to host/SL-6S4BBS3.MYDOMAIN.co.uk
> (6) eap_peap: Sending tunneled request to inner-tunnel
> (6) eap_peap: EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
> (6) eap_peap: User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (6) Virtual server inner-tunnel received request
> (6) EAP-Message = 0x02e6002901686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (6) FreeRADIUS-Proxied-To = 127.0.0.1
> (6) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (6) WARNING: Outer and inner identities are the same. User privacy is compromised.
> (6) server inner-tunnel {
> (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
> (6) authorize {
> (6) policy filter_username {
> (6) if (&User-Name) {
> (6) if (&User-Name) -> TRUE
> (6) if (&User-Name) {
> (6) if (&User-Name =~ / /) {
> (6) if (&User-Name =~ / /) -> FALSE
> (6) if (&User-Name =~ /@[^@]*@/ ) {
> (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (6) if (&User-Name =~ /\.\./ ) {
> (6) if (&User-Name =~ /\.\./ ) -> FALSE
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (6) if (&User-Name =~ /\.$/) {
> (6) if (&User-Name =~ /\.$/) -> FALSE
> (6) if (&User-Name =~ /@\./) {
> (6) if (&User-Name =~ /@\./) -> FALSE
> (6) } # if (&User-Name) = notfound
> (6) } # policy filter_username = notfound
> (6) policy ad_computer_username {
> (6) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) {
> (6) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) -> TRUE
> (6) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) {
> (6) update request {
> (6) EXPAND %{1}$
> (6) --> SL-6S4BBS3$
> (6) &Stripped-User-Name := SL-6S4BBS3$
> (6) } # update request = noop
> (6) if ("%{3}" != '') {
> (6) EXPAND %{3}
> (6) --> MYDOMAIN.co.uk
> (6) if ("%{3}" != '') -> TRUE
> (6) if ("%{3}" != '') {
> (6) update request {
> (6) EXPAND %{3}
> (6) --> MYDOMAIN.co.uk
> (6) &Stripped-User-Domain = MYDOMAIN.co.uk
> (6) EXPAND %{3}
> (6) --> MYDOMAIN.co.uk
> (6) &realm := MYDOMAIN.co.uk
> (6) } # update request = noop
> (6) } # if ("%{3}" != '') = noop
> (6) [updated] = updated
> (6) } # if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) = updated
> (6) ... skipping else: Preceding "if" was taken
> (6) } # policy ad_computer_username = updated
> (6) policy filter_inner_identity {
> (6) if (!&outer.request:User-Name || !&User-Name) {
> (6) if (!&outer.request:User-Name || !&User-Name) -> FALSE
> (6) if (&outer.request:User-Name != &User-Name) {
> (6) if (&outer.request:User-Name != &User-Name) -> FALSE
> (6) } # policy filter_inner_identity = updated
> (6) [chap] = noop
> (6) [mschap] = noop
> (6) suffix: Request already has destination realm set. Ignoring
> (6) [suffix] = noop
> (6) update control {
> (6) &Proxy-To-Realm := LOCAL
> (6) } # update control = noop
> (6) eap: Peer sent EAP Response (code 2) ID 230 length 41
> (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
> (6) [eap] = ok
> (6) } # authorize = ok
> (6) Found Auth-Type = eap
> (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (6) authenticate {
> (6) eap: Peer sent packet with method EAP Identity (1)
> (6) eap: Calling submodule eap_mschapv2 to process data
> (6) eap_mschapv2: Issuing Challenge
> (6) eap: Sending EAP Request (code 1) ID 231 length 42
> (6) eap: EAP session adding &reply:State = 0xede77fe3ed00658b
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) } # server inner-tunnel
> (6) Virtual server sending reply
> (6) EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0xede77fe3ed00658b2611adfefd1eb95e
> (6) eap_peap: Got tunneled reply code 11
> (6) eap_peap: EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32
> (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (6) eap_peap: State = 0xede77fe3ed00658b2611adfefd1eb95e
> (6) eap_peap: Got tunneled reply RADIUS code 11
> (6) eap_peap: EAP-Message = 0x01e7002a1a01e700251018429e2f73fa1d1f708a08eab58f9303667265657261646975732d332e322e32
> (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (6) eap_peap: State = 0xede77fe3ed00658b2611adfefd1eb95e
> (6) eap_peap: Got tunneled Access-Challenge
> (6) eap: Sending EAP Request (code 1) ID 231 length 73
> (6) eap: EAP session adding &reply:State = 0xa2f91851a41e01a2
> (6) [eap] = handled
> (6) } # authenticate = handled
> (6) Using Post-Auth-Type Challenge
> (6) # Executing group from file /etc/raddb/sites-enabled/default
> (6) Challenge { ... } # empty sub-section is ignored
> (6) session-state: Saving cached attributes
> (6) Framed-MTU = 994
> (6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (6) TLS-Session-Version = "TLS 1.2"
> (6) Sent Access-Challenge Id 208 from 192.168.15.22:1812 to 192.168.4.183:40744 length 131
> (6) EAP-Message = 0x01e700491900170303003e0292373b404e0824f68f6f9a55e22ab49ff88824830541895f006aace7eeff05416d88319fa5ff9a8f676fe7b7d1865a1a5dd5d02d8360dda3e2fa05f6f7
> (6) Message-Authenticator = 0x00000000000000000000000000000000
> (6) State = 0xa2f91851a41e01a2ba9496e09aa2d64c
> (6) Finished request
> Waking up in 4.9 seconds.
> (7) Received Access-Request Id 209 from 192.168.4.183:40744 to 192.168.15.22:1812 length 353
> (7) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (7) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (7) NAS-Port-Type = Wireless-802.11
> (7) Service-Type = Framed-User
> (7) NAS-Port = 1
> (7) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (7) Connect-Info = "CONNECT 54Mbps 802.11a"
> (7) Acct-Session-Id = "7AF5DECDA3D1020E"
> (7) WLAN-Pairwise-Cipher = 1027076
> (7) WLAN-Group-Cipher = 1027076
> (7) WLAN-AKM-Suite = 1027073
> (7) Framed-MTU = 1400
> (7) EAP-Message = 0x02e7007e1900170303007300000000000000027b9322e534889e59cf73b49f78b04f94dde670f8ab5b1498810d5c67eb341706c1481bdb3e899835ad498d113a934782396acee4975a42eff342319baabd11f32833e1bb90543f6569ab798880a12f9b696c2eaa0af0d1e4c8b09d9248a72ab408acde5ec010a39d71757b
> (7) State = 0xa2f91851a41e01a2ba9496e09aa2d64c
> (7) Message-Authenticator = 0xa9e9e786e494d085735ff5c7c065a11f
> (7) Restoring &session-state
> (7) &session-state:Framed-MTU = 994
> (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (7) &session-state:TLS-Session-Version = "TLS 1.2"
> (7) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ / /) {
> (7) if (&User-Name =~ / /) -> FALSE
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) [preprocess] = ok
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) [digest] = noop
> (7) suffix: Checking for suffix after "@"
> (7) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (7) suffix: No such realm "NULL"
> (7) [suffix] = noop
> (7) eap: Peer sent EAP Response (code 2) ID 231 length 126
> (7) eap: Continuing tunnel setup
> (7) [eap] = ok
> (7) } # authorize = ok
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/raddb/sites-enabled/default
> (7) authenticate {
> (7) eap: Expiring EAP session with state 0xede77fe3ed00658b
> (7) eap: Finished EAP session with state 0xa2f91851a41e01a2
> (7) eap: Previous EAP request found for state 0xa2f91851a41e01a2, released from the list
> (7) eap: Peer sent packet with method EAP PEAP (25)
> (7) eap: Calling submodule eap_peap to process data
> (7) eap_peap: (TLS) EAP Done initial handshake
> (7) eap_peap: Session established. Decoding tunneled attributes
> (7) eap_peap: PEAP state phase2
> (7) eap_peap: EAP method MSCHAPv2 (26)
> (7) eap_peap: Got tunneled request
> (7) eap_peap: EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (7) eap_peap: Setting User-Name to host/SL-6S4BBS3.MYDOMAIN.co.uk
> (7) eap_peap: Sending tunneled request to inner-tunnel
> (7) eap_peap: EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
> (7) eap_peap: User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (7) eap_peap: State = 0xede77fe3ed00658b2611adfefd1eb95e
> (7) Virtual server inner-tunnel received request
> (7) EAP-Message = 0x02e7005f1a02e7005a312dff4531c3ab61003cc8a3048a8eda570000000000000000a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd00686f73742f534c2d365334424253332e6c616d62726f6f6b7363686f6f6c2e636f2e756b
> (7) FreeRADIUS-Proxied-To = 127.0.0.1
> (7) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (7) State = 0xede77fe3ed00658b2611adfefd1eb95e
> (7) WARNING: Outer and inner identities are the same. User privacy is compromised.
> (7) server inner-tunnel {
> (7) session-state: No cached attributes
> (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
> (7) authorize {
> (7) policy filter_username {
> (7) if (&User-Name) {
> (7) if (&User-Name) -> TRUE
> (7) if (&User-Name) {
> (7) if (&User-Name =~ / /) {
> (7) if (&User-Name =~ / /) -> FALSE
> (7) if (&User-Name =~ /@[^@]*@/ ) {
> (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (7) if (&User-Name =~ /\.\./ ) {
> (7) if (&User-Name =~ /\.\./ ) -> FALSE
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (7) if (&User-Name =~ /\.$/) {
> (7) if (&User-Name =~ /\.$/) -> FALSE
> (7) if (&User-Name =~ /@\./) {
> (7) if (&User-Name =~ /@\./) -> FALSE
> (7) } # if (&User-Name) = notfound
> (7) } # policy filter_username = notfound
> (7) policy ad_computer_username {
> (7) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) {
> (7) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) -> TRUE
> (7) if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) {
> (7) update request {
> (7) EXPAND %{1}$
> (7) --> SL-6S4BBS3$
> (7) &Stripped-User-Name := SL-6S4BBS3$
> (7) } # update request = noop
> (7) if ("%{3}" != '') {
> (7) EXPAND %{3}
> (7) --> MYDOMAIN.co.uk
> (7) if ("%{3}" != '') -> TRUE
> (7) if ("%{3}" != '') {
> (7) update request {
> (7) EXPAND %{3}
> (7) --> MYDOMAIN.co.uk
> (7) &Stripped-User-Domain = MYDOMAIN.co.uk
> (7) EXPAND %{3}
> (7) --> MYDOMAIN.co.uk
> (7) &realm := MYDOMAIN.co.uk
> (7) } # update request = noop
> (7) } # if ("%{3}" != '') = noop
> (7) [updated] = updated
> (7) } # if (&User-Name && (&User-Name =~ /^host\/([-[:alnum:]]+)(\.([-[:alnum:].]*))*$/)) = updated
> (7) ... skipping else: Preceding "if" was taken
> (7) } # policy ad_computer_username = updated
> (7) policy filter_inner_identity {
> (7) if (!&outer.request:User-Name || !&User-Name) {
> (7) if (!&outer.request:User-Name || !&User-Name) -> FALSE
> (7) if (&outer.request:User-Name != &User-Name) {
> (7) if (&outer.request:User-Name != &User-Name) -> FALSE
> (7) } # policy filter_inner_identity = updated
> (7) [chap] = noop
> (7) [mschap] = noop
> (7) suffix: Request already has destination realm set. Ignoring
> (7) [suffix] = noop
> (7) update control {
> (7) &Proxy-To-Realm := LOCAL
> (7) } # update control = noop
> (7) eap: Peer sent EAP Response (code 2) ID 231 length 95
> (7) eap: No EAP Start, assuming it's an on-going EAP conversation
> (7) [eap] = updated
> (7) files: Searching for user in group "CN=staff,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
> rlm_ldap (ldap): Reserved connection (0)
> (7) files: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})
> (7) files: --> (samaccountname=SL-6S4BBS3$)
> (7) files: Performing search in "dc=MYDOMAIN,dc=co,dc=uk" with filter "(samaccountname=SL-6S4BBS3$)", scope "sub"
> (7) files: Waiting for search result...
> ber_get_next failed, errno=11.
> TLS certificate verification: Error, unable to get local issuer certificate
> rlm_ldap (ldap): Rebinding to URL ldaps://MYDOMAIN.co.uk/CN=Configuration,DC=MYDOMAIN,DC=co,DC=uk
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (7) files: User object found at DN "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
> (7) files: Checking user object's memberOf attributes
> (7) files: Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base"
> (7) files: Waiting for search result...
> (7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN
> rlm_ldap (ldap): Released connection (0)
> Need more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (7) files: User is not a member of "CN=staff,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
> (7) files: Searching for user in group "CN=students,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
> rlm_ldap (ldap): Reserved connection (1)
> (7) files: Using user DN from request "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
> (7) files: Checking user object's memberOf attributes
> (7) files: Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base"
> (7) files: Waiting for search result...
> (7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN
> rlm_ldap (ldap): Released connection (1)
> Need more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used
> rlm_ldap (ldap): Connecting to ldaps://DC01.MYDOMAIN.co.uk:636
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (7) files: User is not a member of "CN=students,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
> (7) files: Searching for user in group "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk"
> rlm_ldap (ldap): Reserved connection (2)
> (7) files: Using user DN from request "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
> (7) files: Checking user object's memberOf attributes
> (7) files: Performing unfiltered search in "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk", scope "base"
> (7) files: Waiting for search result...
> (7) files: Processing memberOf value "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk" as a DN
> (7) files: User found in group DN "CN=wifi_machines,CN=Users,DC=MYDOMAIN,DC=co,DC=uk". Comparison between membership: dn, check: dn
> rlm_ldap (ldap): Released connection (2)
> (7) files: users: Matched entry DEFAULT at line 11
> (7) [files] = ok
> rlm_ldap (ldap): Reserved connection (3)
> (7) ldap: EXPAND (samaccountname=%{%{Stripped-User-Name}:-%{User-Name}})
> (7) ldap: --> (samaccountname=SL-6S4BBS3$)
> (7) ldap: Performing search in "dc=MYDOMAIN,dc=co,dc=uk" with filter "(samaccountname=SL-6S4BBS3$)", scope "sub"
> (7) ldap: Waiting for search result...
> rlm_ldap (ldap): Rebinding to URL ldaps://MYDOMAIN.co.uk/CN=Configuration,DC=MYDOMAIN,DC=co,DC=uk
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (7) ldap: User object found at DN "CN=SL-6S4BBS3,OU=Machines,DC=MYDOMAIN,DC=co,DC=uk"
> (7) ldap: Processing user attributes
> (7) ldap: WARNING: No "known good" password added. Ensure the MYADMIN user has permission to read the password attribute
> (7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure)
> rlm_ldap (ldap): Released connection (3)
> (7) [ldap] = ok
> (7) [expiration] = noop
> (7) [logintime] = noop
> (7) [pap] = noop
> (7) } # authorize = updated
> (7) Found Auth-Type = eap
> (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (7) authenticate {
> (7) eap: Expiring EAP session with state 0xede77fe3ed00658b
> (7) eap: Finished EAP session with state 0xede77fe3ed00658b
> (7) eap: Previous EAP request found for state 0xede77fe3ed00658b, released from the list
> (7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
> (7) eap: Calling submodule eap_mschapv2 to process data
> (7) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (7) eap_mschapv2: authenticate {
> (7) mschap: Creating challenge hash with username: host/SL-6S4BBS3.MYDOMAIN.co.uk
> (7) mschap: Client is using MS-CHAPv2
> (7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name} --allow-mschapv2 --domain=MYDOMAIN --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}:
> (7) mschap: EXPAND --username=%{mschap:User-Name}
> (7) mschap: --> --username=SL-6S4BBS3$
> (7) mschap: Creating challenge hash with username: host/SL-6S4BBS3.MYDOMAIN.co.uk
> (7) mschap: EXPAND --challenge=%{mschap:Challenge:-00}
> (7) mschap: --> --challenge=eab8de792c4017e7
> (7) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00}
> (7) mschap: --> --nt-response=a2f045aa6bb93ee5db34bf3918cf842e50aec5aae4a926bd
> (7) mschap: ERROR: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'
> (7) mschap: External script failed
> (7) mschap: ERROR: External script says: The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)
> (7) mschap: ERROR: MS-CHAP2-Response is incorrect
> (7) eap_mschapv2: [mschap] = reject
> (7) eap_mschapv2: } # authenticate = reject
> (7) eap: Sending EAP Failure (code 4) ID 231 length 4
> (7) eap: Freeing handler
> (7) [eap] = reject
> (7) } # authenticate = reject
> (7) Failed to authenticate the user
> (7) Using Post-Auth-Type Reject
> (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
> (7) Post-Auth-Type REJECT {
> (7) attr_filter.access_reject: EXPAND %{User-Name}
> (7) attr_filter.access_reject: --> host/SL-6S4BBS3.MYDOMAIN.co.uk
> (7) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (7) [attr_filter.access_reject] = updated
> (7) update outer.session-state {
> (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: Program returned code (1) and output \'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)\''
> (7) } # update outer.session-state = noop
> (7) } # Post-Auth-Type REJECT = updated
> (7) } # server inner-tunnel
> (7) Virtual server sending reply
> (7) MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected"
> (7) EAP-Message = 0x04e70004
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap: Got tunneled reply code 3
> (7) eap_peap: MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected"
> (7) eap_peap: EAP-Message = 0x04e70004
> (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap: Got tunneled reply RADIUS code 3
> (7) eap_peap: MS-CHAP-Error = "\347E=691 R=1 C=fa425a4c5c13386ac9c64ab4d1978adf V=3 M=Authentication rejected"
> (7) eap_peap: EAP-Message = 0x04e70004
> (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
> (7) eap_peap: Tunneled authentication was rejected
> (7) eap_peap: FAILURE
> (7) eap: Sending EAP Request (code 1) ID 232 length 46
> (7) eap: EAP session adding &reply:State = 0xa2f91851a51101a2
> (7) [eap] = handled
> (7) } # authenticate = handled
> (7) Using Post-Auth-Type Challenge
> (7) # Executing group from file /etc/raddb/sites-enabled/default
> (7) Challenge { ... } # empty sub-section is ignored
> (7) session-state: Saving cached attributes
> (7) Framed-MTU = 994
> (7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (7) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (7) TLS-Session-Version = "TLS 1.2"
> (7) Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'"
> (7) Sent Access-Challenge Id 209 from 192.168.15.22:1812 to 192.168.4.183:40744 length 104
> (7) EAP-Message = 0x01e8002e190017030300230292373b404e0825e3a4e9c5f699e6fe4e5edeebdd618ae26ccc847c29515b2490b95f
> (7) Message-Authenticator = 0x00000000000000000000000000000000
> (7) State = 0xa2f91851a51101a2ba9496e09aa2d64c
> (7) Finished request
> Waking up in 4.6 seconds.
> (8) Received Access-Request Id 210 from 192.168.4.183:40744 to 192.168.15.22:1812 length 273
> (8) User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk"
> (8) Called-Station-Id = "F6-92-BF-3E-8D-EF:MYDOMAIN"
> (8) NAS-Port-Type = Wireless-802.11
> (8) Service-Type = Framed-User
> (8) NAS-Port = 1
> (8) Calling-Station-Id = "28-6B-35-4F-46-BF"
> (8) Connect-Info = "CONNECT 54Mbps 802.11a"
> (8) Acct-Session-Id = "7AF5DECDA3D1020E"
> (8) WLAN-Pairwise-Cipher = 1027076
> (8) WLAN-Group-Cipher = 1027076
> (8) WLAN-AKM-Suite = 1027073
> (8) Framed-MTU = 1400
> (8) EAP-Message = 0x02e8002e190017030300230000000000000003ea33017147c3302fdd480b9bd7a1ca0fd7ba7737df755ffe4ea240
> (8) State = 0xa2f91851a51101a2ba9496e09aa2d64c
> (8) Message-Authenticator = 0x03f0ffd538cbbb486e3851ef134e7a75
> (8) Restoring &session-state
> (8) &session-state:Framed-MTU = 994
> (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
> (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
> (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
> (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange"
> (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone"
> (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange"
> (8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
> (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
> (8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
> (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
> (8) &session-state:TLS-Session-Version = "TLS 1.2"
> (8) &session-state:Module-Failure-Message := "mschap: Program returned code (1) and output 'The attempted logon is invalid. This is either due to a bad username or authentication information. (0xc000006d)'"
> (8) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (8) authorize {
> (8) policy filter_username {
> (8) if (&User-Name) {
> (8) if (&User-Name) -> TRUE
> (8) if (&User-Name) {
> (8) if (&User-Name =~ / /) {
> (8) if (&User-Name =~ / /) -> FALSE
> (8) if (&User-Name =~ /@[^@]*@/ ) {
> (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (8) if (&User-Name =~ /\.\./ ) {
> (8) if (&User-Name =~ /\.\./ ) -> FALSE
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
> (8) if (&User-Name =~ /\.$/) {
> (8) if (&User-Name =~ /\.$/) -> FALSE
> (8) if (&User-Name =~ /@\./) {
> (8) if (&User-Name =~ /@\./) -> FALSE
> (8) } # if (&User-Name) = notfound
> (8) } # policy filter_username = notfound
> (8) [preprocess] = ok
> (8) [chap] = noop
> (8) [mschap] = noop
> (8) [digest] = noop
> (8) suffix: Checking for suffix after "@"
> (8) suffix: No '@' in User-Name = "host/SL-6S4BBS3.MYDOMAIN.co.uk", looking up realm NULL
> (8) suffix: No such realm "NULL"
> (8) [suffix] = noop
> (8) eap: Peer sent EAP Response (code 2) ID 232 length 46
> (8) eap: Continuing tunnel setup
> (8) [eap] = ok
> (8) } # authorize = ok
> (8) Found Auth-Type = eap
> (8) # Executing group from file /etc/raddb/sites-enabled/default
> (8) authenticate {
> (8) eap: Expiring EAP session with state 0xa2f91851a51101a2
> (8) eap: Finished EAP session with state 0xa2f91851a51101a2
> (8) eap: Previous EAP request found for state 0xa2f91851a51101a2, released from the list
> (8) eap: Peer sent packet with method EAP PEAP (25)
> (8) eap: Calling submodule eap_peap to process data
> (8) eap_peap: (TLS) EAP Done initial handshake
> (8) eap_peap: Session established. Decoding tunneled attributes
> (8) eap_peap: PEAP state send tlv failure
> (8) eap_peap: Received EAP-TLV response
> (8) eap_peap: ERROR: The users session was previously rejected: returning reject (again.)
> (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output
> (8) eap_peap: to find out the reason why the user was rejected
> (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
> (8) eap_peap: what went wrong, and how to fix the problem
> (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
> (8) eap: Sending EAP Failure (code 4) ID 232 length 4
> (8) eap: Failed in EAP select
> (8) [eap] = invalid
> (8) } # authenticate = invalid
> (8) Failed to authenticate the user
> (8) Using Post-Auth-Type Reject
> (8) # Executing group from file /etc/raddb/sites-enabled/default
> (8) Post-Auth-Type REJECT {
> (8) attr_filter.access_reject: EXPAND %{User-Name}
> (8) attr_filter.access_reject: --> host/SL-6S4BBS3.MYDOMAIN.co.uk
> (8) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (8) [attr_filter.access_reject] = updated
> (8) [eap] = noop
> (8) policy remove_reply_message_if_eap {
> (8) if (&reply:EAP-Message && &reply:Reply-Message) {
> (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (8) else {
> (8) [noop] = noop
> (8) } # else = noop
> (8) } # policy remove_reply_message_if_eap = noop
> (8) } # Post-Auth-Type REJECT = updated
> (8) Delaying response for 1.000000 seconds
> Waking up in 0.3 seconds.
> Waking up in 0.6 seconds.
> (8) Sending delayed response
> (8) Sent Access-Reject Id 210 from 192.168.15.22:1812 to 192.168.4.183:40744 length 44
> (8) EAP-Message = 0x04e80004
> (8) Message-Authenticator = 0x00000000000000000000000000000000
> Waking up in 3.6 seconds.
> (5) Cleaning up request packet ID 207 with timestamp +24 due to cleanup_delay was reached
> (6) Cleaning up request packet ID 208 with timestamp +24 due to cleanup_delay was reached
> Waking up in 0.3 seconds.
> (7) Cleaning up request packet ID 209 with timestamp +24 due to cleanup_delay was reached
> (8) Cleaning up request packet ID 210 with timestamp +25 due to cleanup_delay was reached
> Ready to process requests
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list