check user device mac address without doing mac-auth

[Eby Mani]

 Thanks Alan,

>> Are you talking about "authorized_macs" file or mac mapped(Calling-Station-Id) to particular user in users file ?.
> If that's where you want to put MAC addresses, yes.

I have installed freeradius without sql integration for testing.

1, changed # Instead of "use_tunneled_reply", value to "if (1) {.
2, users file have following entry on top.
testing Password := "password", Calling-Station-Id := "0cf346e648f3"

Unauthorised devices with same login are granted access once authorised device is authenticated and server receive accounting-request is from unauthorised device. But when unauthorised devices try to connect for the first time, we see access-reject. 

I'm not sure if this happen due to any stale sessions, as these android devices to do not have a wireless disconnect button to properly terminate accounting.

unauthorised device mac - 06ad2e0b874b

Thanks,

truncated debug output, hope this does not include junk info for troubleshooting.
#################################################################################
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 49880
Listening on proxy address :: port 52573
Ready to process requests
(0) Received Access-Request Id 233 from 10.225.251.10:52377 to 172.16.2.4:1812 length 187
(0) User-Name = "testing"
(0) NAS-IP-Address = 10.225.251.10
(0) NAS-Port = 0
(0) NAS-Identifier = "172.16.6.62"
(0) NAS-Port-Type = Wireless-802.11
(0) Calling-Station-Id = "0cf346e648f3"
(0) Called-Station-Id = "removed"
(0) Service-Type = Login-User
(0) Framed-MTU = 1100
(0) EAP-Message = 0x0201000c0174657374696e67
(0) Aruba-Essid-Name = "wtf"
(0) Aruba-Location-Id = "Building-A"
(0) Aruba-AP-Group = "Cluster"
(0) Message-Authenticator = 0x6b374ac5a93bce8c2437b87861837f2e
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "testing", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 12
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0x26ecb91326eebd98
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 233 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(0) EAP-Message = 0x010200160410b87d1a4e19320c5a96ecd9c38383c104
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x26ecb91326eebd9834dbb54fecf0e9db
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 234 from 10.225.251.10:52377 to 172.16.2.4:1812 length 201
(1) User-Name = "testing"
(1) NAS-IP-Address = 10.225.251.10
(1) NAS-Port = 0
(1) NAS-Identifier = "172.16.6.62"
(1) NAS-Port-Type = Wireless-802.11
(1) Calling-Station-Id = "0cf346e648f3"
(1) Called-Station-Id = "removed"
(1) Service-Type = Login-User
(1) Framed-MTU = 1100
(1) EAP-Message = 0x0202000803191534
(1) State = 0x26ecb91326eebd9834dbb54fecf0e9db
(1) Aruba-Essid-Name = "wtf"
(1) Aruba-Location-Id = "Building-A"
(1) Aruba-AP-Group = "Cluster"
(1) Message-Authenticator = 0x54bb5e57cb31ffae2f7b88043cf81436
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "testing", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) files: users: Matched entry testing at line 1
(1) [files] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x26ecb91326eebd98
(1) eap: Finished EAP session with state 0x26ecb91326eebd98
(1) eap: Previous EAP request found for state 0x26ecb91326eebd98, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x26ecb91327efa098
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 234 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(1) EAP-Message = 0x010300061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x26ecb91327efa09834dbb54fecf0e9db
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 235 from 10.225.251.10:52377 to 172.16.2.4:1812 length 334
(2) User-Name = "testing"
(2) NAS-IP-Address = 10.225.251.10
(2) NAS-Port = 0
(2) NAS-Identifier = "172.16.6.62"
(2) NAS-Port-Type = Wireless-802.11
(2) Calling-Station-Id = "0cf346e648f3"
(2) Called-Station-Id = "removed"
(2) Service-Type = Login-User
(2) Framed-MTU = 1100
(2) EAP-Message = 0x0203008d198000000083160301007e0100007a0303060aa89fafeaaf392589d5fe6fb92e44af5a6ecd2ee85b1aeacad97cb6f7b48a00001ec02bc02fc02cc030cca9cca8c009c013c00ac014009c009d002f0035000a0100003300170000ff01000100000a00080006001d00170018000b00020100000d
(2) State = 0x26ecb91327efa09834dbb54fecf0e9db
(2) Aruba-Essid-Name = "wtf"
(2) Aruba-Location-Id = "Building-A"
(2) Aruba-AP-Group = "Cluster"
(2) Message-Authenticator = 0xdbadf9ba93a059334f8680af0fe6c4b5
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "testing", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 141
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x26ecb91327efa098
(2) eap: Finished EAP session with state 0x26ecb91327efa098
(2) eap: Previous EAP request found for state 0x26ecb91327efa098, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 131 bytes
(2) eap_peap: Got complete TLS record (131 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 007e]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2 [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2 [length 02ed]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x26ecb91324e8a098
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 235 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(2) EAP-Message = 0x010403ec19c00000048f160303003d0200003903038d3a1204d1b8331e273aa41d6f940848b75a78c30a3530d9444f574e4752440100c02f000011ff01000100000b0004030001020017000016030302ed0b0002e90002e60002e3308202df308201c7a00302010202144332d5c60c9f4d943c5616923e
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x26ecb91324e8a09834dbb54fecf0e9db
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 236 from 10.225.251.10:52377 to 172.16.2.4:1812 length 199
(3) User-Name = "testing"
(3) NAS-IP-Address = 10.225.251.10
(3) NAS-Port = 0
(3) NAS-Identifier = "172.16.6.62"
(3) NAS-Port-Type = Wireless-802.11
(3) Calling-Station-Id = "0cf346e648f3"
(3) Called-Station-Id = "removed"
(3) Service-Type = Login-User
(3) Framed-MTU = 1100
(3) EAP-Message = 0x020400061900
(3) State = 0x26ecb91324e8a09834dbb54fecf0e9db
(3) Aruba-Essid-Name = "wtf"
(3) Aruba-Location-Id = "Building-A"
(3) Aruba-AP-Group = "Cluster"
(3) Message-Authenticator = 0x0ca5b03d33d32f13fa1d7fa508466f90
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "testing", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x26ecb91324e8a098
(3) eap: Finished EAP session with state 0x26ecb91324e8a098
(3) eap: Previous EAP request found for state 0x26ecb91324e8a098, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 179
(3) eap: EAP session adding &reply:State = 0x26ecb91325e9a098
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 236 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(3) EAP-Message = 0x010500b3190021c7f360b873becbfa70b91b337e04c5a6311621341a44518886b69767800fca211ab4ddd1e5e10d9cd553895b1b1d948973e3959e053e09fa38f0964c9063e0f7a0bb9d5933236b3b07bab59dd46b46b1bbdcc397f7be6c45bcc193ab1127f61adca3aa6a987813a4352f081dc792fd5d
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x26ecb91325e9a09834dbb54fecf0e9db
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 237 from 10.225.251.10:52377 to 172.16.2.4:1812 length 329
(4) User-Name = "testing"
(4) NAS-IP-Address = 10.225.251.10
(4) NAS-Port = 0
(4) NAS-Identifier = "172.16.6.62"
(4) NAS-Port-Type = Wireless-802.11
(4) Calling-Station-Id = "0cf346e648f3"
(4) Called-Station-Id = "removed"
(4) Service-Type = Login-User
(4) Framed-MTU = 1100
(4) EAP-Message = 0x0205008819800000007e1603030046100000424104d51ed9058fa13b42818aeed7c2d686aac07c3682ee808b17625b4e1c511314e62eb452b1449b24311a9a55961f811a931966f08055b69ce5589356585ac9847a140303000101160303002800000000000000000a3e6bdb506872b81bc568b13f53b0
(4) State = 0x26ecb91325e9a09834dbb54fecf0e9db
(4) Aruba-Essid-Name = "wtf"
(4) Aruba-Location-Id = "Building-A"
(4) Aruba-AP-Group = "Cluster"
(4) Message-Authenticator = 0x72178224b9c9119753955ab0e5f3b71f
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "testing", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x26ecb91325e9a098
(4) eap: Finished EAP session with state 0x26ecb91325e9a098
(4) eap: Previous EAP request found for state 0x26ecb91325e9a098, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2 [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2 [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 57
(4) eap: EAP session adding &reply:State = 0x26ecb91322eaa098
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 237 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(4) EAP-Message = 0x0106003919001403030001011603030028dd27973f8182c94ca4f1925e99fd7a9230f8231af5e52990249dea19962109ae1227daa1aa18f296
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x26ecb91322eaa09834dbb54fecf0e9db
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 238 from 10.225.251.10:52377 to 172.16.2.4:1812 length 199
(5) User-Name = "testing"
(5) NAS-IP-Address = 10.225.251.10
(5) NAS-Port = 0
(5) NAS-Identifier = "172.16.6.62"
(5) NAS-Port-Type = Wireless-802.11
(5) Calling-Station-Id = "0cf346e648f3"
(5) Called-Station-Id = "removed"
(5) Service-Type = Login-User
(5) Framed-MTU = 1100
(5) EAP-Message = 0x020600061900
(5) State = 0x26ecb91322eaa09834dbb54fecf0e9db
(5) Aruba-Essid-Name = "wtf"
(5) Aruba-Location-Id = "Building-A"
(5) Aruba-AP-Group = "Cluster"
(5) Message-Authenticator = 0xcf603138502bf912302edf3d39c0bade
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "testing", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x26ecb91322eaa098
(5) eap: Finished EAP session with state 0x26ecb91322eaa098
(5) eap: Previous EAP request found for state 0x26ecb91322eaa098, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 7 length 40
(5) eap: EAP session adding &reply:State = 0x26ecb91323eba098
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 238 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(5) EAP-Message = 0x010700281900170303001ddd27973f8182c94d6975d89772745d4712cd702dfaa3c80366c524bb9b
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x26ecb91323eba09834dbb54fecf0e9db
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 239 from 10.225.251.10:52377 to 172.16.2.4:1812 length 236
(6) User-Name = "testing"
(6) NAS-IP-Address = 10.225.251.10
(6) NAS-Port = 0
(6) NAS-Identifier = "172.16.6.62"
(6) NAS-Port-Type = Wireless-802.11
(6) Calling-Station-Id = "0cf346e648f3"
(6) Called-Station-Id = "removed"
(6) Service-Type = Login-User
(6) Framed-MTU = 1100
(6) EAP-Message = 0x0207002b190017030300200000000000000001b79a353c2acffa5086f5d27b61130dc019f2fc2f117920c2
(6) State = 0x26ecb91323eba09834dbb54fecf0e9db
(6) Aruba-Essid-Name = "wtf"
(6) Aruba-Location-Id = "Building-A"
(6) Aruba-AP-Group = "Cluster"
(6) Message-Authenticator = 0x305948d9985d10f1fc907ab52fb03b57
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "testing", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 43
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x26ecb91323eba098
(6) eap: Finished EAP session with state 0x26ecb91323eba098
(6) eap: Previous EAP request found for state 0x26ecb91323eba098, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - testing
(6) eap_peap: Got inner identity 'testing'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x0207000c0174657374696e67
(6) eap_peap: Setting User-Name to testing
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x0207000c0174657374696e67
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "testing"
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x0207000c0174657374696e67
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "testing"
(6) WARNING: Outer and inner identities are the same. User privacy is compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "testing", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 12
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 43
(6) eap: EAP session adding &reply:State = 0x2ea1368a2ea92c2a
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message = 0x0108002b1a010800261084853adf713aeb5b9367bccd0e5ae601667265657261646975732d332e302e3136
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x2ea1368a2ea92c2ab71bf7409912d765
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message = 0x0108002b1a010800261084853adf713aeb5b9367bccd0e5ae601667265657261646975732d332e302e3136
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0x2ea1368a2ea92c2ab71bf7409912d765
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message = 0x0108002b1a010800261084853adf713aeb5b9367bccd0e5ae601667265657261646975732d332e302e3136
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0x2ea1368a2ea92c2ab71bf7409912d765
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 74
(6) eap: EAP session adding &reply:State = 0x26ecb91320e4a098
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 239 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(6) EAP-Message = 0x0108004a1900170303003fdd27973f8182c94ebae01294a307e163cb7811f64a56fb051792c4356b4bb2eaa2ba42fab24fd88c8e8d86d894a8bffddf1f32a9ce4f8a260a190661e0a4bb
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x26ecb91320e4a09834dbb54fecf0e9db
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 240 from 10.225.251.10:52377 to 172.16.2.4:1812 length 290
(7) User-Name = "testing"
(7) NAS-IP-Address = 10.225.251.10
(7) NAS-Port = 0
(7) NAS-Identifier = "172.16.6.62"
(7) NAS-Port-Type = Wireless-802.11
(7) Calling-Station-Id = "0cf346e648f3"
(7) Called-Station-Id = "removed"
(7) Service-Type = Login-User
(7) Framed-MTU = 1100
(7) EAP-Message = 0x0208006119001703030056000000000000000255e3756b8198a325c561878777ec4d23e1317189f62014fa5f28ffc199956b64f7afd4cee0939fb0fe438e01f6fd074d24246fa6acd514ebdbc9e56f1d7cd50bf6782b0b1bb618564742e1f65e0d
(7) State = 0x26ecb91320e4a09834dbb54fecf0e9db
(7) Aruba-Essid-Name = "wtf"
(7) Aruba-Location-Id = "Building-A"
(7) Aruba-AP-Group = "Cluster"
(7) Message-Authenticator = 0x249f707d7c4b10a7db58fa0192977675
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testing", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 97
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x2ea1368a2ea92c2a
(7) eap: Finished EAP session with state 0x26ecb91320e4a098
(7) eap: Previous EAP request found for state 0x26ecb91320e4a098, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message = 0x020800421a0208003d31f5f81f06d523e49c46444b5ea79bbc7f0000000000000000d4efc0e6e084153be5618a6dfdd5ad08a74e5d07c8d528c10074657374696e67
(7) eap_peap: Setting User-Name to testing
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message = 0x020800421a0208003d31f5f81f06d523e49c46444b5ea79bbc7f0000000000000000d4efc0e6e084153be5618a6dfdd5ad08a74e5d07c8d528c10074657374696e67
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "testing"
(7) eap_peap: State = 0x2ea1368a2ea92c2ab71bf7409912d765
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x020800421a0208003d31f5f81f06d523e49c46444b5ea79bbc7f0000000000000000d4efc0e6e084153be5618a6dfdd5ad08a74e5d07c8d528c10074657374696e67
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "testing"
(7) State = 0x2ea1368a2ea92c2ab71bf7409912d765
(7) WARNING: Outer and inner identities are the same. User privacy is compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testing", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 66
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) files: users: Matched entry testing at line 1
(7) [files] = ok
(7) [expiration] = noop
(7) [logintime] = noop
(7) pap: WARNING: Auth-Type already set. Not setting to PAP
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0x2ea1368a2ea92c2a
(7) eap: Finished EAP session with state 0x2ea1368a2ea92c2a
(7) eap: Previous EAP request found for state 0x2ea1368a2ea92c2a, released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2: authenticate {
(7) mschap: Found Cleartext-Password, hashing to create NT-Password
(7) mschap: Found Cleartext-Password, hashing to create LM-Password
(7) mschap: Creating challenge hash with username: testing
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Adding MS-CHAPv2 MPPE keys
(7) [mschap] = ok
(7) } # authenticate = ok
(7) MSCHAP Success
(7) eap: Sending EAP Request (code 1) ID 9 length 51
(7) eap: EAP session adding &reply:State = 0x2ea1368a2fa82c2a
(7) [eap] = handled
(7) } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) EAP-Message = 0x010900331a0308002e533d32334644333531354545374644334331383431303434413139373244324238353932313441464636
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x2ea1368a2fa82c2ab71bf7409912d765
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap: EAP-Message = 0x010900331a0308002e533d32334644333531354545374644334331383431303434413139373244324238353932313441464636
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0x2ea1368a2fa82c2ab71bf7409912d765
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap: EAP-Message = 0x010900331a0308002e533d32334644333531354545374644334331383431303434413139373244324238353932313441464636
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0x2ea1368a2fa82c2ab71bf7409912d765
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 9 length 82
(7) eap: EAP session adding &reply:State = 0x26ecb91321e5a098
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 240 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(7) EAP-Message = 0x0109005219001703030047dd27973f8182c94f61e31c86381c9ec1a5e493e2a1e053f284bea160e03e1ea47f03e0b7ea785681c214523240b4a271cdb9dfe8d8c3f23c007deb6e9ce44595120fecd4003694
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x26ecb91321e5a09834dbb54fecf0e9db
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 241 from 10.225.251.10:52377 to 172.16.2.4:1812 length 230
(8) User-Name = "testing"
(8) NAS-IP-Address = 10.225.251.10
(8) NAS-Port = 0
(8) NAS-Identifier = "172.16.6.62"
(8) NAS-Port-Type = Wireless-802.11
(8) Calling-Station-Id = "0cf346e648f3"
(8) Called-Station-Id = "removed"
(8) Service-Type = Login-User
(8) Framed-MTU = 1100
(8) EAP-Message = 0x020900251900170303001a0000000000000003c6ffb6d7d0fe9efaa852faca49166d526817
(8) State = 0x26ecb91321e5a09834dbb54fecf0e9db
(8) Aruba-Essid-Name = "wtf"
(8) Aruba-Location-Id = "Building-A"
(8) Aruba-AP-Group = "Cluster"
(8) Message-Authenticator = 0x1222cf19f68850add1e1ced0f33858cb
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "testing", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 37
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x2ea1368a2fa82c2a
(8) eap: Finished EAP session with state 0x26ecb91321e5a098
(8) eap: Previous EAP request found for state 0x26ecb91321e5a098, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x020900061a03
(8) eap_peap: Setting User-Name to testing
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x020900061a03
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "testing"
(8) eap_peap: State = 0x2ea1368a2fa82c2ab71bf7409912d765
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x020900061a03
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "testing"
(8) State = 0x2ea1368a2fa82c2ab71bf7409912d765
(8) WARNING: Outer and inner identities are the same. User privacy is compromised.
(8) server inner-tunnel {
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [chap] = noop
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "testing", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) &Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) files: users: Matched entry testing at line 1
(8) [files] = ok
(8) [expiration] = noop
(8) [logintime] = noop
(8) pap: WARNING: Auth-Type already set. Not setting to PAP
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(8) authenticate {
(8) eap: Expiring EAP session with state 0x2ea1368a2fa82c2a
(8) eap: Finished EAP session with state 0x2ea1368a2fa82c2a
(8) eap: Previous EAP request found for state 0x2ea1368a2fa82c2a, released from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap: Sending EAP Success (code 3) ID 9 length 4
(8) eap: Freeing handler
(8) [eap] = ok
(8) } # authenticate = ok
(8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(8) post-auth {
(8) if (1) {
(8) if (1) -> TRUE
(8) if (1) {
(8) update reply {
(8) User-Name !* ANY
(8) Message-Authenticator !* ANY
(8) EAP-Message !* ANY
(8) Proxy-State !* ANY
(8) MS-MPPE-Encryption-Types !* ANY
(8) MS-MPPE-Encryption-Policy !* ANY
(8) MS-MPPE-Send-Key !* ANY
(8) MS-MPPE-Recv-Key !* ANY
(8) } # update reply = noop
(8) update {
(8) No attributes updated
(8) } # update = noop
(8) } # if (1) = noop
(8) } # post-auth = noop
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) eap_peap: Got tunneled reply code 2
(8) eap_peap: Got tunneled reply RADIUS code 2
(8) eap_peap: Tunneled authentication was successful
(8) eap_peap: SUCCESS
(8) eap: Sending EAP Request (code 1) ID 10 length 46
(8) eap: EAP session adding &reply:State = 0x26ecb9132ee6a098
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) Challenge { ... } # empty sub-section is ignored
(8) Sent Access-Challenge Id 241 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(8) EAP-Message = 0x010a002e19001703030023dd27973f8182c9506b6c812b8d338645bb98f38584dc0f5ff7f6ca62583242b986081b
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x26ecb9132ee6a09834dbb54fecf0e9db
(8) Finished request
Waking up in 4.8 seconds.
(9) Received Access-Request Id 242 from 10.225.251.10:52377 to 172.16.2.4:1812 length 239
(9) User-Name = "testing"
(9) NAS-IP-Address = 10.225.251.10
(9) NAS-Port = 0
(9) NAS-Identifier = "172.16.6.62"
(9) NAS-Port-Type = Wireless-802.11
(9) Calling-Station-Id = "0cf346e648f3"
(9) Called-Station-Id = "removed"
(9) Service-Type = Login-User
(9) Framed-MTU = 1100
(9) EAP-Message = 0x020a002e190017030300230000000000000004f6b4015bb76668d7defe5fbaa272b19d37cb7660b5f38334a55592
(9) State = 0x26ecb9132ee6a09834dbb54fecf0e9db
(9) Aruba-Essid-Name = "wtf"
(9) Aruba-Location-Id = "Building-A"
(9) Aruba-AP-Group = "Cluster"
(9) Message-Authenticator = 0xbfeb9e46ea138b7b564ba6f041b2ab71
(9) session-state: No cached attributes
(9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "testing", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 10 length 46
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0x26ecb9132ee6a098
(9) eap: Finished EAP session with state 0x26ecb9132ee6a098
(9) eap: Previous EAP request found for state 0x26ecb9132ee6a098, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv success
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: Success
(9) eap: Sending EAP Success (code 3) ID 10 length 4
(9) eap: Freeing handler
(9) [eap] = ok
(9) } # authenticate = ok
(9) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(9) post-auth {
(9) update {
(9) No attributes updated
(9) } # update = noop
(9) [exec] = noop
(9) policy remove_reply_message_if_eap {
(9) if (&reply:EAP-Message && &reply:Reply-Message) {
(9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(9) else {
(9) [noop] = noop
(9) } # else = noop
(9) } # policy remove_reply_message_if_eap = noop
(9) } # post-auth = noop
(9) Sent Access-Accept Id 242 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(9) MS-MPPE-Recv-Key = 0x0ea59c83fc37bd0daeaa9242a6e0cf94e51dd3ece25ac81cfaffbc9946c94522
(9) MS-MPPE-Send-Key = 0x7a5be9e771c473a5ed942fa234930a4051f6461b0157dc51f5de7c2391d16022
(9) EAP-Message = 0x030a0004
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) User-Name = "testing"
(9) Finished request
Waking up in 4.8 seconds.
(10) Received Accounting-Request Id 243 from 10.225.251.10:52377 to 172.16.2.4:1813 length 218
(10) Acct-Status-Type = Start
(10) NAS-IP-Address = 10.225.251.10
(10) User-Name = "testing"
(10) NAS-Port = 0
(10) NAS-Port-Type = Wireless-802.11
(10) Calling-Station-Id = "0cf346e648f3"
(10) Called-Station-Id = "removed"
(10) Framed-IP-Address = 10.225.251.61
(10) Acct-Multi-Session-Id = "0CF346E648F3-1679732014"
(10) Acct-Session-Id = "F05C1986E387-0CF346E648F3-641EAD2F-9DA8F"
(10) Acct-Delay-Time = 0
(10) Aruba-Essid-Name = "wtf"
(10) Aruba-Location-Id = "Building-A"
(10) Aruba-User-Vlan = 51
(10) Acct-Authentic = 0
(10) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default
(10) preacct {
(10) [preprocess] = ok
(10) policy acct_unique {
(10) update request {
(10) &Tmp-String-9 := "ai:"
(10) } # update request = noop
(10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(10) EXPAND %{hex:&Class}
(10) -->
(10) EXPAND ^%{hex:&Tmp-String-9}
(10) --> ^61693a
(10) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(10) else {
(10) update request {
(10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(10) --> f50bcba9a953cd64b2995ff219b0e0bc
(10) &Acct-Unique-Session-Id := f50bcba9a953cd64b2995ff219b0e0bc
(10) } # update request = noop
(10) } # else = noop
(10) } # policy acct_unique = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "testing", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) [files] = noop
(10) } # preacct = ok
(10) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default
(10) accounting {
(10) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(10) detail: --> /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(10) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(10) detail: EXPAND %t
(10) detail: --> Sat Mar 25 13:43:35 2023
(10) [detail] = ok
(10) [unix] = ok
(10) [exec] = noop
(10) attr_filter.accounting_response: EXPAND %{User-Name}
(10) attr_filter.accounting_response: --> testing
(10) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(10) [attr_filter.accounting_response] = updated
(10) } # accounting = updated
(10) Sent Accounting-Response Id 243 from 172.16.2.4:1813 to 10.225.251.10:52377 length 0
(10) Finished request
(10) Cleaning up request packet ID 243 with timestamp +29
Waking up in 4.7 seconds.
(0) Cleaning up request packet ID 233 with timestamp +29
(1) Cleaning up request packet ID 234 with timestamp +29
(2) Cleaning up request packet ID 235 with timestamp +29
(3) Cleaning up request packet ID 236 with timestamp +29
(4) Cleaning up request packet ID 237 with timestamp +29
(5) Cleaning up request packet ID 238 with timestamp +29
(6) Cleaning up request packet ID 239 with timestamp +29
(7) Cleaning up request packet ID 240 with timestamp +29
(8) Cleaning up request packet ID 241 with timestamp +29
(9) Cleaning up request packet ID 242 with timestamp +29
Ready to process requests
(11) Received Access-Request Id 244 from 10.225.251.10:52377 to 172.16.2.4:1812 length 187
(11) User-Name = "testing"
(11) NAS-IP-Address = 10.225.251.10
(11) NAS-Port = 0
(11) NAS-Identifier = "172.16.6.62"
(11) NAS-Port-Type = Wireless-802.11
(11) Calling-Station-Id = "06ad2e0b874b"
(11) Called-Station-Id = "removed"
(11) Service-Type = Login-User
(11) Framed-MTU = 1100
(11) EAP-Message = 0x0201000c0174657374696e67
(11) Aruba-Essid-Name = "wtf"
(11) Aruba-Location-Id = "Building-A"
(11) Aruba-AP-Group = "Cluster"
(11) Message-Authenticator = 0x226998c0a30b9bc73e64a5278ff8df75
(11) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(11) authorize {
(11) policy filter_username {
(11) if (&User-Name) {
(11) if (&User-Name) -> TRUE
(11) if (&User-Name) {
(11) if (&User-Name =~ / /) {
(11) if (&User-Name =~ / /) -> FALSE
(11) if (&User-Name =~ /@[^@]*@/ ) {
(11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(11) if (&User-Name =~ /\.\./ ) {
(11) if (&User-Name =~ /\.\./ ) -> FALSE
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(11) if (&User-Name =~ /\.$/) {
(11) if (&User-Name =~ /\.$/) -> FALSE
(11) if (&User-Name =~ /@\./) {
(11) if (&User-Name =~ /@\./) -> FALSE
(11) } # if (&User-Name) = notfound
(11) } # policy filter_username = notfound
(11) [preprocess] = ok
(11) [chap] = noop
(11) [mschap] = noop
(11) [digest] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: No '@' in User-Name = "testing", looking up realm NULL
(11) suffix: No such realm "NULL"
(11) [suffix] = noop
(11) eap: Peer sent EAP Response (code 2) ID 1 length 12
(11) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(11) [eap] = ok
(11) } # authorize = ok
(11) Found Auth-Type = eap
(11) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(11) authenticate {
(11) eap: Peer sent packet with method EAP Identity (1)
(11) eap: Calling submodule eap_md5 to process data
(11) eap_md5: Issuing MD5 Challenge
(11) eap: Sending EAP Request (code 1) ID 2 length 22
(11) eap: EAP session adding &reply:State = 0xbb30d846bb32dce8
(11) [eap] = handled
(11) } # authenticate = handled
(11) Using Post-Auth-Type Challenge
(11) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(11) Challenge { ... } # empty sub-section is ignored
(11) Sent Access-Challenge Id 244 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(11) EAP-Message = 0x0102001604102aabbe281b9b4ef7b6791e1a0e2f0e84
(11) Message-Authenticator = 0x00000000000000000000000000000000
(11) State = 0xbb30d846bb32dce8d4ac4e5dffc91c7d
(11) Finished request
Waking up in 4.9 seconds.
(12) Received Access-Request Id 245 from 10.225.251.10:52377 to 172.16.2.4:1812 length 199
(12) User-Name = "testing"
(12) NAS-IP-Address = 10.225.251.10
(12) NAS-Port = 0
(12) NAS-Identifier = "172.16.6.62"
(12) NAS-Port-Type = Wireless-802.11
(12) Calling-Station-Id = "06ad2e0b874b"
(12) Called-Station-Id = "removed"
(12) Service-Type = Login-User
(12) Framed-MTU = 1100
(12) EAP-Message = 0x020200060319
(12) State = 0xbb30d846bb32dce8d4ac4e5dffc91c7d
(12) Aruba-Essid-Name = "wtf"
(12) Aruba-Location-Id = "Building-A"
(12) Aruba-AP-Group = "Cluster"
(12) Message-Authenticator = 0x488b93679e0ff25cabd26b6cd61599b9
(12) session-state: No cached attributes
(12) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(12) authorize {
(12) policy filter_username {
(12) if (&User-Name) {
(12) if (&User-Name) -> TRUE
(12) if (&User-Name) {
(12) if (&User-Name =~ / /) {
(12) if (&User-Name =~ / /) -> FALSE
(12) if (&User-Name =~ /@[^@]*@/ ) {
(12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(12) if (&User-Name =~ /\.\./ ) {
(12) if (&User-Name =~ /\.\./ ) -> FALSE
(12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(12) if (&User-Name =~ /\.$/) {
(12) if (&User-Name =~ /\.$/) -> FALSE
(12) if (&User-Name =~ /@\./) {
(12) if (&User-Name =~ /@\./) -> FALSE
(12) } # if (&User-Name) = notfound
(12) } # policy filter_username = notfound
(12) [preprocess] = ok
(12) [chap] = noop
(12) [mschap] = noop
(12) [digest] = noop
(12) suffix: Checking for suffix after "@"
(12) suffix: No '@' in User-Name = "testing", looking up realm NULL
(12) suffix: No such realm "NULL"
(12) [suffix] = noop
(12) eap: Peer sent EAP Response (code 2) ID 2 length 6
(12) eap: No EAP Start, assuming it's an on-going EAP conversation
(12) [eap] = updated
(12) files: users: Matched entry testing at line 1
(12) [files] = ok
(12) [expiration] = noop
(12) [logintime] = noop
(12) pap: WARNING: Auth-Type already set. Not setting to PAP
(12) [pap] = noop
(12) } # authorize = updated
(12) Found Auth-Type = eap
(12) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(12) authenticate {
(12) eap: Expiring EAP session with state 0xbb30d846bb32dce8
(12) eap: Finished EAP session with state 0xbb30d846bb32dce8
(12) eap: Previous EAP request found for state 0xbb30d846bb32dce8, released from the list
(12) eap: Peer sent packet with method EAP NAK (3)
(12) eap: Found mutually acceptable type PEAP (25)
(12) eap: Calling submodule eap_peap to process data
(12) eap_peap: Initiating new EAP-TLS session
(12) eap_peap: [eaptls start] = request
(12) eap: Sending EAP Request (code 1) ID 3 length 6
(12) eap: EAP session adding &reply:State = 0xbb30d846ba33c1e8
(12) [eap] = handled
(12) } # authenticate = handled
(12) Using Post-Auth-Type Challenge
(12) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(12) Challenge { ... } # empty sub-section is ignored
(12) Sent Access-Challenge Id 245 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(12) EAP-Message = 0x010300061920
(12) Message-Authenticator = 0x00000000000000000000000000000000
(12) State = 0xbb30d846ba33c1e8d4ac4e5dffc91c7d
(12) Finished request
Waking up in 4.9 seconds.
(13) Received Access-Request Id 246 from 10.225.251.10:52377 to 172.16.2.4:1812 length 334
(13) User-Name = "testing"
(13) NAS-IP-Address = 10.225.251.10
(13) NAS-Port = 0
(13) NAS-Identifier = "172.16.6.62"
(13) NAS-Port-Type = Wireless-802.11
(13) Calling-Station-Id = "06ad2e0b874b"
(13) Called-Station-Id = "removed"
(13) Service-Type = Login-User
(13) Framed-MTU = 1100
(13) EAP-Message = 0x0203008d198000000083160301007e0100007a0303ac80a1e0cfb54d63b1b8b1ebe9fd9a28499814f0094affe277d8f45891311a7b00001ec02bc02fc02cc030cca9cca8c009c013c00ac014009c009d002f0035000a0100003300170000ff01000100000a00080006001d00170018000b00020100000d
(13) State = 0xbb30d846ba33c1e8d4ac4e5dffc91c7d
(13) Aruba-Essid-Name = "wtf"
(13) Aruba-Location-Id = "Building-A"
(13) Aruba-AP-Group = "Cluster"
(13) Message-Authenticator = 0xe7149581d1b428b6b5bf8b4df035ca6e
(13) session-state: No cached attributes
(13) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(13) authorize {
(13) policy filter_username {
(13) if (&User-Name) {
(13) if (&User-Name) -> TRUE
(13) if (&User-Name) {
(13) if (&User-Name =~ / /) {
(13) if (&User-Name =~ / /) -> FALSE
(13) if (&User-Name =~ /@[^@]*@/ ) {
(13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(13) if (&User-Name =~ /\.\./ ) {
(13) if (&User-Name =~ /\.\./ ) -> FALSE
(13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(13) if (&User-Name =~ /\.$/) {
(13) if (&User-Name =~ /\.$/) -> FALSE
(13) if (&User-Name =~ /@\./) {
(13) if (&User-Name =~ /@\./) -> FALSE
(13) } # if (&User-Name) = notfound
(13) } # policy filter_username = notfound
(13) [preprocess] = ok
(13) [chap] = noop
(13) [mschap] = noop
(13) [digest] = noop
(13) suffix: Checking for suffix after "@"
(13) suffix: No '@' in User-Name = "testing", looking up realm NULL
(13) suffix: No such realm "NULL"
(13) [suffix] = noop
(13) eap: Peer sent EAP Response (code 2) ID 3 length 141
(13) eap: Continuing tunnel setup
(13) [eap] = ok
(13) } # authorize = ok
(13) Found Auth-Type = eap
(13) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(13) authenticate {
(13) eap: Expiring EAP session with state 0xbb30d846ba33c1e8
(13) eap: Finished EAP session with state 0xbb30d846ba33c1e8
(13) eap: Previous EAP request found for state 0xbb30d846ba33c1e8, released from the list
(13) eap: Peer sent packet with method EAP PEAP (25)
(13) eap: Calling submodule eap_peap to process data
(13) eap_peap: Continuing EAP-TLS
(13) eap_peap: Peer indicated complete TLS record size will be 131 bytes
(13) eap_peap: Got complete TLS record (131 bytes)
(13) eap_peap: [eaptls verify] = length included
(13) eap_peap: (other): before SSL initialization
(13) eap_peap: TLS_accept: before SSL initialization
(13) eap_peap: TLS_accept: before SSL initialization
(13) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 007e]
(13) eap_peap: TLS_accept: SSLv3/TLS read client hello
(13) eap_peap: >>> send TLS 1.2 [length 003d]
(13) eap_peap: TLS_accept: SSLv3/TLS write server hello
(13) eap_peap: >>> send TLS 1.2 [length 02ed]
(13) eap_peap: TLS_accept: SSLv3/TLS write certificate
(13) eap_peap: >>> send TLS 1.2 [length 014d]
(13) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(13) eap_peap: >>> send TLS 1.2 [length 0004]
(13) eap_peap: TLS_accept: SSLv3/TLS write server done
(13) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(13) eap_peap: In SSL Handshake Phase
(13) eap_peap: In SSL Accept mode
(13) eap_peap: [eaptls process] = handled
(13) eap: Sending EAP Request (code 1) ID 4 length 1004
(13) eap: EAP session adding &reply:State = 0xbb30d846b934c1e8
(13) [eap] = handled
(13) } # authenticate = handled
(13) Using Post-Auth-Type Challenge
(13) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(13) Challenge { ... } # empty sub-section is ignored
(13) Sent Access-Challenge Id 246 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(13) EAP-Message = 0x010403ec19c00000048f160303003d020000390303ce804def818f33b72d5290f269346761c0174b90392d63cf444f574e4752440100c02f000011ff01000100000b0004030001020017000016030302ed0b0002e90002e60002e3308202df308201c7a00302010202144332d5c60c9f4d943c5616923e
(13) Message-Authenticator = 0x00000000000000000000000000000000
(13) State = 0xbb30d846b934c1e8d4ac4e5dffc91c7d
(13) Finished request
Waking up in 4.9 seconds.
(14) Received Access-Request Id 247 from 10.225.251.10:52377 to 172.16.2.4:1812 length 199
(14) User-Name = "testing"
(14) NAS-IP-Address = 10.225.251.10
(14) NAS-Port = 0
(14) NAS-Identifier = "172.16.6.62"
(14) NAS-Port-Type = Wireless-802.11
(14) Calling-Station-Id = "06ad2e0b874b"
(14) Called-Station-Id = "removed"
(14) Service-Type = Login-User
(14) Framed-MTU = 1100
(14) EAP-Message = 0x020400061900
(14) State = 0xbb30d846b934c1e8d4ac4e5dffc91c7d
(14) Aruba-Essid-Name = "wtf"
(14) Aruba-Location-Id = "Building-A"
(14) Aruba-AP-Group = "Cluster"
(14) Message-Authenticator = 0x09a019e8b7748dd384ded96b90487c23
(14) session-state: No cached attributes
(14) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(14) authorize {
(14) policy filter_username {
(14) if (&User-Name) {
(14) if (&User-Name) -> TRUE
(14) if (&User-Name) {
(14) if (&User-Name =~ / /) {
(14) if (&User-Name =~ / /) -> FALSE
(14) if (&User-Name =~ /@[^@]*@/ ) {
(14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(14) if (&User-Name =~ /\.\./ ) {
(14) if (&User-Name =~ /\.\./ ) -> FALSE
(14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(14) if (&User-Name =~ /\.$/) {
(14) if (&User-Name =~ /\.$/) -> FALSE
(14) if (&User-Name =~ /@\./) {
(14) if (&User-Name =~ /@\./) -> FALSE
(14) } # if (&User-Name) = notfound
(14) } # policy filter_username = notfound
(14) [preprocess] = ok
(14) [chap] = noop
(14) [mschap] = noop
(14) [digest] = noop
(14) suffix: Checking for suffix after "@"
(14) suffix: No '@' in User-Name = "testing", looking up realm NULL
(14) suffix: No such realm "NULL"
(14) [suffix] = noop
(14) eap: Peer sent EAP Response (code 2) ID 4 length 6
(14) eap: Continuing tunnel setup
(14) [eap] = ok
(14) } # authorize = ok
(14) Found Auth-Type = eap
(14) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(14) authenticate {
(14) eap: Expiring EAP session with state 0xbb30d846b934c1e8
(14) eap: Finished EAP session with state 0xbb30d846b934c1e8
(14) eap: Previous EAP request found for state 0xbb30d846b934c1e8, released from the list
(14) eap: Peer sent packet with method EAP PEAP (25)
(14) eap: Calling submodule eap_peap to process data
(14) eap_peap: Continuing EAP-TLS
(14) eap_peap: Peer ACKed our handshake fragment
(14) eap_peap: [eaptls verify] = request
(14) eap_peap: [eaptls process] = handled
(14) eap: Sending EAP Request (code 1) ID 5 length 179
(14) eap: EAP session adding &reply:State = 0xbb30d846b835c1e8
(14) [eap] = handled
(14) } # authenticate = handled
(14) Using Post-Auth-Type Challenge
(14) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(14) Challenge { ... } # empty sub-section is ignored
(14) Sent Access-Challenge Id 247 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(14) EAP-Message = 0x010500b319004b062413d146deea5af650c4d176b054f6bea9d1f35f00f7ee65ad4a65f229c64167c739a51b216a4a4f284063b0fab80a743fc68e912ffb12011fc9340b15e0b90037aebb2fc7dc8472e8fa37c8e89d5394268a92f2991493ce624c2722bc1df2f42342589abc220092edd96e78a1bb7b
(14) Message-Authenticator = 0x00000000000000000000000000000000
(14) State = 0xbb30d846b835c1e8d4ac4e5dffc91c7d
(14) Finished request
Waking up in 4.9 seconds.
(15) Received Access-Request Id 248 from 10.225.251.10:52377 to 172.16.2.4:1812 length 329
(15) User-Name = "testing"
(15) NAS-IP-Address = 10.225.251.10
(15) NAS-Port = 0
(15) NAS-Identifier = "172.16.6.62"
(15) NAS-Port-Type = Wireless-802.11
(15) Calling-Station-Id = "06ad2e0b874b"
(15) Called-Station-Id = "removed"
(15) Service-Type = Login-User
(15) Framed-MTU = 1100
(15) EAP-Message = 0x0205008819800000007e1603030046100000424104a0764b4f1161a0da2cb31cb2304059a4e88c3758d26baeafc5dce494af6b49009edd0e37c5c4c275958cd7f9f5d739094741d530dee468e859e5f38a4d0a785614030300010116030300280000000000000000e7a05889da33645bc83c4cb6667024
(15) State = 0xbb30d846b835c1e8d4ac4e5dffc91c7d
(15) Aruba-Essid-Name = "wtf"
(15) Aruba-Location-Id = "Building-A"
(15) Aruba-AP-Group = "Cluster"
(15) Message-Authenticator = 0x0f0a1f0a76d70586c876d8425371f243
(15) session-state: No cached attributes
(15) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(15) authorize {
(15) policy filter_username {
(15) if (&User-Name) {
(15) if (&User-Name) -> TRUE
(15) if (&User-Name) {
(15) if (&User-Name =~ / /) {
(15) if (&User-Name =~ / /) -> FALSE
(15) if (&User-Name =~ /@[^@]*@/ ) {
(15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(15) if (&User-Name =~ /\.\./ ) {
(15) if (&User-Name =~ /\.\./ ) -> FALSE
(15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(15) if (&User-Name =~ /\.$/) {
(15) if (&User-Name =~ /\.$/) -> FALSE
(15) if (&User-Name =~ /@\./) {
(15) if (&User-Name =~ /@\./) -> FALSE
(15) } # if (&User-Name) = notfound
(15) } # policy filter_username = notfound
(15) [preprocess] = ok
(15) [chap] = noop
(15) [mschap] = noop
(15) [digest] = noop
(15) suffix: Checking for suffix after "@"
(15) suffix: No '@' in User-Name = "testing", looking up realm NULL
(15) suffix: No such realm "NULL"
(15) [suffix] = noop
(15) eap: Peer sent EAP Response (code 2) ID 5 length 136
(15) eap: Continuing tunnel setup
(15) [eap] = ok
(15) } # authorize = ok
(15) Found Auth-Type = eap
(15) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(15) authenticate {
(15) eap: Expiring EAP session with state 0xbb30d846b835c1e8
(15) eap: Finished EAP session with state 0xbb30d846b835c1e8
(15) eap: Previous EAP request found for state 0xbb30d846b835c1e8, released from the list
(15) eap: Peer sent packet with method EAP PEAP (25)
(15) eap: Calling submodule eap_peap to process data
(15) eap_peap: Continuing EAP-TLS
(15) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(15) eap_peap: Got complete TLS record (126 bytes)
(15) eap_peap: [eaptls verify] = length included
(15) eap_peap: TLS_accept: SSLv3/TLS write server done
(15) eap_peap: <<< recv TLS 1.2 [length 0046]
(15) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(15) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(15) eap_peap: <<< recv TLS 1.2 [length 0010]
(15) eap_peap: TLS_accept: SSLv3/TLS read finished
(15) eap_peap: >>> send TLS 1.2 [length 0001]
(15) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(15) eap_peap: >>> send TLS 1.2 [length 0010]
(15) eap_peap: TLS_accept: SSLv3/TLS write finished
(15) eap_peap: (other): SSL negotiation finished successfully
(15) eap_peap: SSL Connection Established
(15) eap_peap: [eaptls process] = handled
(15) eap: Sending EAP Request (code 1) ID 6 length 57
(15) eap: EAP session adding &reply:State = 0xbb30d846bf36c1e8
(15) [eap] = handled
(15) } # authenticate = handled
(15) Using Post-Auth-Type Challenge
(15) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(15) Challenge { ... } # empty sub-section is ignored
(15) Sent Access-Challenge Id 248 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(15) EAP-Message = 0x01060039190014030300010116030300284201276eba70648c4775e39c857a1aa878536f8d697f772bb04b977b86c33e27d40197981b4f839a
(15) Message-Authenticator = 0x00000000000000000000000000000000
(15) State = 0xbb30d846bf36c1e8d4ac4e5dffc91c7d
(15) Finished request
Waking up in 4.9 seconds.
(16) Received Access-Request Id 249 from 10.225.251.10:52377 to 172.16.2.4:1812 length 199
(16) User-Name = "testing"
(16) NAS-IP-Address = 10.225.251.10
(16) NAS-Port = 0
(16) NAS-Identifier = "172.16.6.62"
(16) NAS-Port-Type = Wireless-802.11
(16) Calling-Station-Id = "06ad2e0b874b"
(16) Called-Station-Id = "removed"
(16) Service-Type = Login-User
(16) Framed-MTU = 1100
(16) EAP-Message = 0x020600061900
(16) State = 0xbb30d846bf36c1e8d4ac4e5dffc91c7d
(16) Aruba-Essid-Name = "wtf"
(16) Aruba-Location-Id = "Building-A"
(16) Aruba-AP-Group = "Cluster"
(16) Message-Authenticator = 0x5d7556cb27c97467b088fe568724e3c2
(16) session-state: No cached attributes
(16) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(16) authorize {
(16) policy filter_username {
(16) if (&User-Name) {
(16) if (&User-Name) -> TRUE
(16) if (&User-Name) {
(16) if (&User-Name =~ / /) {
(16) if (&User-Name =~ / /) -> FALSE
(16) if (&User-Name =~ /@[^@]*@/ ) {
(16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(16) if (&User-Name =~ /\.\./ ) {
(16) if (&User-Name =~ /\.\./ ) -> FALSE
(16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(16) if (&User-Name =~ /\.$/) {
(16) if (&User-Name =~ /\.$/) -> FALSE
(16) if (&User-Name =~ /@\./) {
(16) if (&User-Name =~ /@\./) -> FALSE
(16) } # if (&User-Name) = notfound
(16) } # policy filter_username = notfound
(16) [preprocess] = ok
(16) [chap] = noop
(16) [mschap] = noop
(16) [digest] = noop
(16) suffix: Checking for suffix after "@"
(16) suffix: No '@' in User-Name = "testing", looking up realm NULL
(16) suffix: No such realm "NULL"
(16) [suffix] = noop
(16) eap: Peer sent EAP Response (code 2) ID 6 length 6
(16) eap: Continuing tunnel setup
(16) [eap] = ok
(16) } # authorize = ok
(16) Found Auth-Type = eap
(16) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(16) authenticate {
(16) eap: Expiring EAP session with state 0xbb30d846bf36c1e8
(16) eap: Finished EAP session with state 0xbb30d846bf36c1e8
(16) eap: Previous EAP request found for state 0xbb30d846bf36c1e8, released from the list
(16) eap: Peer sent packet with method EAP PEAP (25)
(16) eap: Calling submodule eap_peap to process data
(16) eap_peap: Continuing EAP-TLS
(16) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(16) eap_peap: [eaptls verify] = success
(16) eap_peap: [eaptls process] = success
(16) eap_peap: Session established. Decoding tunneled attributes
(16) eap_peap: PEAP state TUNNEL ESTABLISHED
(16) eap: Sending EAP Request (code 1) ID 7 length 40
(16) eap: EAP session adding &reply:State = 0xbb30d846be37c1e8
(16) [eap] = handled
(16) } # authenticate = handled
(16) Using Post-Auth-Type Challenge
(16) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(16) Challenge { ... } # empty sub-section is ignored
(16) Sent Access-Challenge Id 249 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(16) EAP-Message = 0x010700281900170303001d4201276eba70648d3b620ce7536e8c53900d37371466508abf55213857
(16) Message-Authenticator = 0x00000000000000000000000000000000
(16) State = 0xbb30d846be37c1e8d4ac4e5dffc91c7d
(16) Finished request
Waking up in 4.8 seconds.
(17) Received Access-Request Id 250 from 10.225.251.10:52377 to 172.16.2.4:1812 length 236
(17) User-Name = "testing"
(17) NAS-IP-Address = 10.225.251.10
(17) NAS-Port = 0
(17) NAS-Identifier = "172.16.6.62"
(17) NAS-Port-Type = Wireless-802.11
(17) Calling-Station-Id = "06ad2e0b874b"
(17) Called-Station-Id = "removed"
(17) Service-Type = Login-User
(17) Framed-MTU = 1100
(17) EAP-Message = 0x0207002b1900170303002000000000000000017ab663bea468e74c54fb1cec7c5bf9ee306ceff0c6d2f249
(17) State = 0xbb30d846be37c1e8d4ac4e5dffc91c7d
(17) Aruba-Essid-Name = "wtf"
(17) Aruba-Location-Id = "Building-A"
(17) Aruba-AP-Group = "Cluster"
(17) Message-Authenticator = 0x14d294600ff184197766e4e7d44c7d13
(17) session-state: No cached attributes
(17) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(17) authorize {
(17) policy filter_username {
(17) if (&User-Name) {
(17) if (&User-Name) -> TRUE
(17) if (&User-Name) {
(17) if (&User-Name =~ / /) {
(17) if (&User-Name =~ / /) -> FALSE
(17) if (&User-Name =~ /@[^@]*@/ ) {
(17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(17) if (&User-Name =~ /\.\./ ) {
(17) if (&User-Name =~ /\.\./ ) -> FALSE
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(17) if (&User-Name =~ /\.$/) {
(17) if (&User-Name =~ /\.$/) -> FALSE
(17) if (&User-Name =~ /@\./) {
(17) if (&User-Name =~ /@\./) -> FALSE
(17) } # if (&User-Name) = notfound
(17) } # policy filter_username = notfound
(17) [preprocess] = ok
(17) [chap] = noop
(17) [mschap] = noop
(17) [digest] = noop
(17) suffix: Checking for suffix after "@"
(17) suffix: No '@' in User-Name = "testing", looking up realm NULL
(17) suffix: No such realm "NULL"
(17) [suffix] = noop
(17) eap: Peer sent EAP Response (code 2) ID 7 length 43
(17) eap: Continuing tunnel setup
(17) [eap] = ok
(17) } # authorize = ok
(17) Found Auth-Type = eap
(17) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(17) authenticate {
(17) eap: Expiring EAP session with state 0xbb30d846be37c1e8
(17) eap: Finished EAP session with state 0xbb30d846be37c1e8
(17) eap: Previous EAP request found for state 0xbb30d846be37c1e8, released from the list
(17) eap: Peer sent packet with method EAP PEAP (25)
(17) eap: Calling submodule eap_peap to process data
(17) eap_peap: Continuing EAP-TLS
(17) eap_peap: [eaptls verify] = ok
(17) eap_peap: Done initial handshake
(17) eap_peap: [eaptls process] = ok
(17) eap_peap: Session established. Decoding tunneled attributes
(17) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(17) eap_peap: Identity - testing
(17) eap_peap: Got inner identity 'testing'
(17) eap_peap: Setting default EAP type for tunneled EAP session
(17) eap_peap: Got tunneled request
(17) eap_peap: EAP-Message = 0x0207000c0174657374696e67
(17) eap_peap: Setting User-Name to testing
(17) eap_peap: Sending tunneled request to inner-tunnel
(17) eap_peap: EAP-Message = 0x0207000c0174657374696e67
(17) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(17) eap_peap: User-Name = "testing"
(17) Virtual server inner-tunnel received request
(17) EAP-Message = 0x0207000c0174657374696e67
(17) FreeRADIUS-Proxied-To = 127.0.0.1
(17) User-Name = "testing"
(17) WARNING: Outer and inner identities are the same. User privacy is compromised.
(17) server inner-tunnel {
(17) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(17) authorize {
(17) policy filter_username {
(17) if (&User-Name) {
(17) if (&User-Name) -> TRUE
(17) if (&User-Name) {
(17) if (&User-Name =~ / /) {
(17) if (&User-Name =~ / /) -> FALSE
(17) if (&User-Name =~ /@[^@]*@/ ) {
(17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(17) if (&User-Name =~ /\.\./ ) {
(17) if (&User-Name =~ /\.\./ ) -> FALSE
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(17) if (&User-Name =~ /\.$/) {
(17) if (&User-Name =~ /\.$/) -> FALSE
(17) if (&User-Name =~ /@\./) {
(17) if (&User-Name =~ /@\./) -> FALSE
(17) } # if (&User-Name) = notfound
(17) } # policy filter_username = notfound
(17) [chap] = noop
(17) [mschap] = noop
(17) suffix: Checking for suffix after "@"
(17) suffix: No '@' in User-Name = "testing", looking up realm NULL
(17) suffix: No such realm "NULL"
(17) [suffix] = noop
(17) update control {
(17) &Proxy-To-Realm := LOCAL
(17) } # update control = noop
(17) eap: Peer sent EAP Response (code 2) ID 7 length 12
(17) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(17) [eap] = ok
(17) } # authorize = ok
(17) Found Auth-Type = eap
(17) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(17) authenticate {
(17) eap: Peer sent packet with method EAP Identity (1)
(17) eap: Calling submodule eap_mschapv2 to process data
(17) eap_mschapv2: Issuing Challenge
(17) eap: Sending EAP Request (code 1) ID 8 length 43
(17) eap: EAP session adding &reply:State = 0xee7e375dee762d2c
(17) [eap] = handled
(17) } # authenticate = handled
(17) } # server inner-tunnel
(17) Virtual server sending reply
(17) EAP-Message = 0x0108002b1a01080026104a0033ce0718110cf2abb2b7768e5d1e667265657261646975732d332e302e3136
(17) Message-Authenticator = 0x00000000000000000000000000000000
(17) State = 0xee7e375dee762d2c9ed555c269b92565
(17) eap_peap: Got tunneled reply code 11
(17) eap_peap: EAP-Message = 0x0108002b1a01080026104a0033ce0718110cf2abb2b7768e5d1e667265657261646975732d332e302e3136
(17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(17) eap_peap: State = 0xee7e375dee762d2c9ed555c269b92565
(17) eap_peap: Got tunneled reply RADIUS code 11
(17) eap_peap: EAP-Message = 0x0108002b1a01080026104a0033ce0718110cf2abb2b7768e5d1e667265657261646975732d332e302e3136
(17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(17) eap_peap: State = 0xee7e375dee762d2c9ed555c269b92565
(17) eap_peap: Got tunneled Access-Challenge
(17) eap: Sending EAP Request (code 1) ID 8 length 74
(17) eap: EAP session adding &reply:State = 0xbb30d846bd38c1e8
(17) [eap] = handled
(17) } # authenticate = handled
(17) Using Post-Auth-Type Challenge
(17) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(17) Challenge { ... } # empty sub-section is ignored
(17) Sent Access-Challenge Id 250 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(17) EAP-Message = 0x0108004a1900170303003f4201276eba70648e8aa60e9cc363cf6285913d08cfba8a1b001a814fca6b0a1fa428123f8cfa8dd46a9a3f3c9a28f8eac9286e7fe6efb84e54768028883f30
(17) Message-Authenticator = 0x00000000000000000000000000000000
(17) State = 0xbb30d846bd38c1e8d4ac4e5dffc91c7d
(17) Finished request
Waking up in 4.7 seconds.
(18) Received Access-Request Id 251 from 10.225.251.10:52377 to 172.16.2.4:1812 length 290
(18) User-Name = "testing"
(18) NAS-IP-Address = 10.225.251.10
(18) NAS-Port = 0
(18) NAS-Identifier = "172.16.6.62"
(18) NAS-Port-Type = Wireless-802.11
(18) Calling-Station-Id = "06ad2e0b874b"
(18) Called-Station-Id = "removed"
(18) Service-Type = Login-User
(18) Framed-MTU = 1100
(18) EAP-Message = 0x02080061190017030300560000000000000002bd616127f9f4538bdfc0c4c3a370af2d4395e40d18319e3d2b9ba513cda95c8d728e01a017dd652dec6cc8677efc8468f3703880a0f2205707186895b0ecb61099e571ce149c5e61c8a9c310158e
(18) State = 0xbb30d846bd38c1e8d4ac4e5dffc91c7d
(18) Aruba-Essid-Name = "wtf"
(18) Aruba-Location-Id = "Building-A"
(18) Aruba-AP-Group = "Cluster"
(18) Message-Authenticator = 0x828d76d65586579076d531392c3accd6
(18) session-state: No cached attributes
(18) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(18) authorize {
(18) policy filter_username {
(18) if (&User-Name) {
(18) if (&User-Name) -> TRUE
(18) if (&User-Name) {
(18) if (&User-Name =~ / /) {
(18) if (&User-Name =~ / /) -> FALSE
(18) if (&User-Name =~ /@[^@]*@/ ) {
(18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(18) if (&User-Name =~ /\.\./ ) {
(18) if (&User-Name =~ /\.\./ ) -> FALSE
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(18) if (&User-Name =~ /\.$/) {
(18) if (&User-Name =~ /\.$/) -> FALSE
(18) if (&User-Name =~ /@\./) {
(18) if (&User-Name =~ /@\./) -> FALSE
(18) } # if (&User-Name) = notfound
(18) } # policy filter_username = notfound
(18) [preprocess] = ok
(18) [chap] = noop
(18) [mschap] = noop
(18) [digest] = noop
(18) suffix: Checking for suffix after "@"
(18) suffix: No '@' in User-Name = "testing", looking up realm NULL
(18) suffix: No such realm "NULL"
(18) [suffix] = noop
(18) eap: Peer sent EAP Response (code 2) ID 8 length 97
(18) eap: Continuing tunnel setup
(18) [eap] = ok
(18) } # authorize = ok
(18) Found Auth-Type = eap
(18) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(18) authenticate {
(18) eap: Expiring EAP session with state 0xee7e375dee762d2c
(18) eap: Finished EAP session with state 0xbb30d846bd38c1e8
(18) eap: Previous EAP request found for state 0xbb30d846bd38c1e8, released from the list
(18) eap: Peer sent packet with method EAP PEAP (25)
(18) eap: Calling submodule eap_peap to process data
(18) eap_peap: Continuing EAP-TLS
(18) eap_peap: [eaptls verify] = ok
(18) eap_peap: Done initial handshake
(18) eap_peap: [eaptls process] = ok
(18) eap_peap: Session established. Decoding tunneled attributes
(18) eap_peap: PEAP state phase2
(18) eap_peap: EAP method MSCHAPv2 (26)
(18) eap_peap: Got tunneled request
(18) eap_peap: EAP-Message = 0x020800421a0208003d31c1786ac1466cb5941e97a205bc31cbb800000000000000009fadb90f90a03108ff6d84284c102dfef3b2db1e77b9b6a50074657374696e67
(18) eap_peap: Setting User-Name to testing
(18) eap_peap: Sending tunneled request to inner-tunnel
(18) eap_peap: EAP-Message = 0x020800421a0208003d31c1786ac1466cb5941e97a205bc31cbb800000000000000009fadb90f90a03108ff6d84284c102dfef3b2db1e77b9b6a50074657374696e67
(18) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(18) eap_peap: User-Name = "testing"
(18) eap_peap: State = 0xee7e375dee762d2c9ed555c269b92565
(18) Virtual server inner-tunnel received request
(18) EAP-Message = 0x020800421a0208003d31c1786ac1466cb5941e97a205bc31cbb800000000000000009fadb90f90a03108ff6d84284c102dfef3b2db1e77b9b6a50074657374696e67
(18) FreeRADIUS-Proxied-To = 127.0.0.1
(18) User-Name = "testing"
(18) State = 0xee7e375dee762d2c9ed555c269b92565
(18) WARNING: Outer and inner identities are the same. User privacy is compromised.
(18) server inner-tunnel {
(18) session-state: No cached attributes
(18) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(18) authorize {
(18) policy filter_username {
(18) if (&User-Name) {
(18) if (&User-Name) -> TRUE
(18) if (&User-Name) {
(18) if (&User-Name =~ / /) {
(18) if (&User-Name =~ / /) -> FALSE
(18) if (&User-Name =~ /@[^@]*@/ ) {
(18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(18) if (&User-Name =~ /\.\./ ) {
(18) if (&User-Name =~ /\.\./ ) -> FALSE
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(18) if (&User-Name =~ /\.$/) {
(18) if (&User-Name =~ /\.$/) -> FALSE
(18) if (&User-Name =~ /@\./) {
(18) if (&User-Name =~ /@\./) -> FALSE
(18) } # if (&User-Name) = notfound
(18) } # policy filter_username = notfound
(18) [chap] = noop
(18) [mschap] = noop
(18) suffix: Checking for suffix after "@"
(18) suffix: No '@' in User-Name = "testing", looking up realm NULL
(18) suffix: No such realm "NULL"
(18) [suffix] = noop
(18) update control {
(18) &Proxy-To-Realm := LOCAL
(18) } # update control = noop
(18) eap: Peer sent EAP Response (code 2) ID 8 length 66
(18) eap: No EAP Start, assuming it's an on-going EAP conversation
(18) [eap] = updated
(18) files: users: Matched entry testing at line 1
(18) [files] = ok
(18) [expiration] = noop
(18) [logintime] = noop
(18) pap: WARNING: Auth-Type already set. Not setting to PAP
(18) [pap] = noop
(18) } # authorize = updated
(18) Found Auth-Type = eap
(18) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(18) authenticate {
(18) eap: Expiring EAP session with state 0xee7e375dee762d2c
(18) eap: Finished EAP session with state 0xee7e375dee762d2c
(18) eap: Previous EAP request found for state 0xee7e375dee762d2c, released from the list
(18) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(18) eap: Calling submodule eap_mschapv2 to process data
(18) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(18) eap_mschapv2: authenticate {
(18) mschap: Found Cleartext-Password, hashing to create NT-Password
(18) mschap: Found Cleartext-Password, hashing to create LM-Password
(18) mschap: Creating challenge hash with username: testing
(18) mschap: Client is using MS-CHAPv2
(18) mschap: Adding MS-CHAPv2 MPPE keys
(18) [mschap] = ok
(18) } # authenticate = ok
(18) MSCHAP Success
(18) eap: Sending EAP Request (code 1) ID 9 length 51
(18) eap: EAP session adding &reply:State = 0xee7e375def772d2c
(18) [eap] = handled
(18) } # authenticate = handled
(18) } # server inner-tunnel
(18) Virtual server sending reply
(18) EAP-Message = 0x010900331a0308002e533d31333238314544374343433133353831374141323541453745374537434235454330363736363833
(18) Message-Authenticator = 0x00000000000000000000000000000000
(18) State = 0xee7e375def772d2c9ed555c269b92565
(18) eap_peap: Got tunneled reply code 11
(18) eap_peap: EAP-Message = 0x010900331a0308002e533d31333238314544374343433133353831374141323541453745374537434235454330363736363833
(18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(18) eap_peap: State = 0xee7e375def772d2c9ed555c269b92565
(18) eap_peap: Got tunneled reply RADIUS code 11
(18) eap_peap: EAP-Message = 0x010900331a0308002e533d31333238314544374343433133353831374141323541453745374537434235454330363736363833
(18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(18) eap_peap: State = 0xee7e375def772d2c9ed555c269b92565
(18) eap_peap: Got tunneled Access-Challenge
(18) eap: Sending EAP Request (code 1) ID 9 length 82
(18) eap: EAP session adding &reply:State = 0xbb30d846bc39c1e8
(18) [eap] = handled
(18) } # authenticate = handled
(18) Using Post-Auth-Type Challenge
(18) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(18) Challenge { ... } # empty sub-section is ignored
(18) Sent Access-Challenge Id 251 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(18) EAP-Message = 0x01090052190017030300474201276eba70648fc8e92f391280d5fe3c398af80b47b9c5e66793fc7999a5cbd618c8f37c5c1b7142f79c39782f0cda89c8c5f308c8fcc2101e943996179e0d1066c184925566
(18) Message-Authenticator = 0x00000000000000000000000000000000
(18) State = 0xbb30d846bc39c1e8d4ac4e5dffc91c7d
(18) Finished request
Waking up in 4.7 seconds.
(19) Received Access-Request Id 252 from 10.225.251.10:52377 to 172.16.2.4:1812 length 230
(19) User-Name = "testing"
(19) NAS-IP-Address = 10.225.251.10
(19) NAS-Port = 0
(19) NAS-Identifier = "172.16.6.62"
(19) NAS-Port-Type = Wireless-802.11
(19) Calling-Station-Id = "06ad2e0b874b"
(19) Called-Station-Id = "removed"
(19) Service-Type = Login-User
(19) Framed-MTU = 1100
(19) EAP-Message = 0x020900251900170303001a00000000000000034ab686ec9309d5efe6560664c3957f46370b
(19) State = 0xbb30d846bc39c1e8d4ac4e5dffc91c7d
(19) Aruba-Essid-Name = "wtf"
(19) Aruba-Location-Id = "Building-A"
(19) Aruba-AP-Group = "Cluster"
(19) Message-Authenticator = 0x2198a78e45accbd8224cc6014c7db134
(19) session-state: No cached attributes
(19) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(19) authorize {
(19) policy filter_username {
(19) if (&User-Name) {
(19) if (&User-Name) -> TRUE
(19) if (&User-Name) {
(19) if (&User-Name =~ / /) {
(19) if (&User-Name =~ / /) -> FALSE
(19) if (&User-Name =~ /@[^@]*@/ ) {
(19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(19) if (&User-Name =~ /\.\./ ) {
(19) if (&User-Name =~ /\.\./ ) -> FALSE
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(19) if (&User-Name =~ /\.$/) {
(19) if (&User-Name =~ /\.$/) -> FALSE
(19) if (&User-Name =~ /@\./) {
(19) if (&User-Name =~ /@\./) -> FALSE
(19) } # if (&User-Name) = notfound
(19) } # policy filter_username = notfound
(19) [preprocess] = ok
(19) [chap] = noop
(19) [mschap] = noop
(19) [digest] = noop
(19) suffix: Checking for suffix after "@"
(19) suffix: No '@' in User-Name = "testing", looking up realm NULL
(19) suffix: No such realm "NULL"
(19) [suffix] = noop
(19) eap: Peer sent EAP Response (code 2) ID 9 length 37
(19) eap: Continuing tunnel setup
(19) [eap] = ok
(19) } # authorize = ok
(19) Found Auth-Type = eap
(19) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(19) authenticate {
(19) eap: Expiring EAP session with state 0xee7e375def772d2c
(19) eap: Finished EAP session with state 0xbb30d846bc39c1e8
(19) eap: Previous EAP request found for state 0xbb30d846bc39c1e8, released from the list
(19) eap: Peer sent packet with method EAP PEAP (25)
(19) eap: Calling submodule eap_peap to process data
(19) eap_peap: Continuing EAP-TLS
(19) eap_peap: [eaptls verify] = ok
(19) eap_peap: Done initial handshake
(19) eap_peap: [eaptls process] = ok
(19) eap_peap: Session established. Decoding tunneled attributes
(19) eap_peap: PEAP state phase2
(19) eap_peap: EAP method MSCHAPv2 (26)
(19) eap_peap: Got tunneled request
(19) eap_peap: EAP-Message = 0x020900061a03
(19) eap_peap: Setting User-Name to testing
(19) eap_peap: Sending tunneled request to inner-tunnel
(19) eap_peap: EAP-Message = 0x020900061a03
(19) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(19) eap_peap: User-Name = "testing"
(19) eap_peap: State = 0xee7e375def772d2c9ed555c269b92565
(19) Virtual server inner-tunnel received request
(19) EAP-Message = 0x020900061a03
(19) FreeRADIUS-Proxied-To = 127.0.0.1
(19) User-Name = "testing"
(19) State = 0xee7e375def772d2c9ed555c269b92565
(19) WARNING: Outer and inner identities are the same. User privacy is compromised.
(19) server inner-tunnel {
(19) session-state: No cached attributes
(19) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(19) authorize {
(19) policy filter_username {
(19) if (&User-Name) {
(19) if (&User-Name) -> TRUE
(19) if (&User-Name) {
(19) if (&User-Name =~ / /) {
(19) if (&User-Name =~ / /) -> FALSE
(19) if (&User-Name =~ /@[^@]*@/ ) {
(19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(19) if (&User-Name =~ /\.\./ ) {
(19) if (&User-Name =~ /\.\./ ) -> FALSE
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(19) if (&User-Name =~ /\.$/) {
(19) if (&User-Name =~ /\.$/) -> FALSE
(19) if (&User-Name =~ /@\./) {
(19) if (&User-Name =~ /@\./) -> FALSE
(19) } # if (&User-Name) = notfound
(19) } # policy filter_username = notfound
(19) [chap] = noop
(19) [mschap] = noop
(19) suffix: Checking for suffix after "@"
(19) suffix: No '@' in User-Name = "testing", looking up realm NULL
(19) suffix: No such realm "NULL"
(19) [suffix] = noop
(19) update control {
(19) &Proxy-To-Realm := LOCAL
(19) } # update control = noop
(19) eap: Peer sent EAP Response (code 2) ID 9 length 6
(19) eap: No EAP Start, assuming it's an on-going EAP conversation
(19) [eap] = updated
(19) files: users: Matched entry testing at line 1
(19) [files] = ok
(19) [expiration] = noop
(19) [logintime] = noop
(19) pap: WARNING: Auth-Type already set. Not setting to PAP
(19) [pap] = noop
(19) } # authorize = updated
(19) Found Auth-Type = eap
(19) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(19) authenticate {
(19) eap: Expiring EAP session with state 0xee7e375def772d2c
(19) eap: Finished EAP session with state 0xee7e375def772d2c
(19) eap: Previous EAP request found for state 0xee7e375def772d2c, released from the list
(19) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(19) eap: Calling submodule eap_mschapv2 to process data
(19) eap: Sending EAP Success (code 3) ID 9 length 4
(19) eap: Freeing handler
(19) [eap] = ok
(19) } # authenticate = ok
(19) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(19) post-auth {
(19) if (1) {
(19) if (1) -> TRUE
(19) if (1) {
(19) update reply {
(19) User-Name !* ANY
(19) Message-Authenticator !* ANY
(19) EAP-Message !* ANY
(19) Proxy-State !* ANY
(19) MS-MPPE-Encryption-Types !* ANY
(19) MS-MPPE-Encryption-Policy !* ANY
(19) MS-MPPE-Send-Key !* ANY
(19) MS-MPPE-Recv-Key !* ANY
(19) } # update reply = noop
(19) update {
(19) No attributes updated
(19) } # update = noop
(19) } # if (1) = noop
(19) } # post-auth = noop
(19) } # server inner-tunnel
(19) Virtual server sending reply
(19) eap_peap: Got tunneled reply code 2
(19) eap_peap: Got tunneled reply RADIUS code 2
(19) eap_peap: Tunneled authentication was successful
(19) eap_peap: SUCCESS
(19) eap: Sending EAP Request (code 1) ID 10 length 46
(19) eap: EAP session adding &reply:State = 0xbb30d846b33ac1e8
(19) [eap] = handled
(19) } # authenticate = handled
(19) Using Post-Auth-Type Challenge
(19) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(19) Challenge { ... } # empty sub-section is ignored
(19) Sent Access-Challenge Id 252 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(19) EAP-Message = 0x010a002e190017030300234201276eba7064902d47ab407d6aea6dee89c758ae90760829c985d2bffc780063b0d8
(19) Message-Authenticator = 0x00000000000000000000000000000000
(19) State = 0xbb30d846b33ac1e8d4ac4e5dffc91c7d
(19) Finished request
Waking up in 4.6 seconds.
(20) Received Access-Request Id 253 from 10.225.251.10:52377 to 172.16.2.4:1812 length 239
(20) User-Name = "testing"
(20) NAS-IP-Address = 10.225.251.10
(20) NAS-Port = 0
(20) NAS-Identifier = "172.16.6.62"
(20) NAS-Port-Type = Wireless-802.11
(20) Calling-Station-Id = "06ad2e0b874b"
(20) Called-Station-Id = "removed"
(20) Service-Type = Login-User
(20) Framed-MTU = 1100
(20) EAP-Message = 0x020a002e190017030300230000000000000004e58fb57b705b3663b5b6addcd7d8a8d04dc22802a8dfe380422c66
(20) State = 0xbb30d846b33ac1e8d4ac4e5dffc91c7d
(20) Aruba-Essid-Name = "wtf"
(20) Aruba-Location-Id = "Building-A"
(20) Aruba-AP-Group = "Cluster"
(20) Message-Authenticator = 0xc49072610d2b6fb631f2905d88ae6abf
(20) session-state: No cached attributes
(20) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(20) authorize {
(20) policy filter_username {
(20) if (&User-Name) {
(20) if (&User-Name) -> TRUE
(20) if (&User-Name) {
(20) if (&User-Name =~ / /) {
(20) if (&User-Name =~ / /) -> FALSE
(20) if (&User-Name =~ /@[^@]*@/ ) {
(20) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(20) if (&User-Name =~ /\.\./ ) {
(20) if (&User-Name =~ /\.\./ ) -> FALSE
(20) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(20) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(20) if (&User-Name =~ /\.$/) {
(20) if (&User-Name =~ /\.$/) -> FALSE
(20) if (&User-Name =~ /@\./) {
(20) if (&User-Name =~ /@\./) -> FALSE
(20) } # if (&User-Name) = notfound
(20) } # policy filter_username = notfound
(20) [preprocess] = ok
(20) [chap] = noop
(20) [mschap] = noop
(20) [digest] = noop
(20) suffix: Checking for suffix after "@"
(20) suffix: No '@' in User-Name = "testing", looking up realm NULL
(20) suffix: No such realm "NULL"
(20) [suffix] = noop
(20) eap: Peer sent EAP Response (code 2) ID 10 length 46
(20) eap: Continuing tunnel setup
(20) [eap] = ok
(20) } # authorize = ok
(20) Found Auth-Type = eap
(20) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(20) authenticate {
(20) eap: Expiring EAP session with state 0xbb30d846b33ac1e8
(20) eap: Finished EAP session with state 0xbb30d846b33ac1e8
(20) eap: Previous EAP request found for state 0xbb30d846b33ac1e8, released from the list
(20) eap: Peer sent packet with method EAP PEAP (25)
(20) eap: Calling submodule eap_peap to process data
(20) eap_peap: Continuing EAP-TLS
(20) eap_peap: [eaptls verify] = ok
(20) eap_peap: Done initial handshake
(20) eap_peap: [eaptls process] = ok
(20) eap_peap: Session established. Decoding tunneled attributes
(20) eap_peap: PEAP state send tlv success
(20) eap_peap: Received EAP-TLV response
(20) eap_peap: Success
(20) eap: Sending EAP Success (code 3) ID 10 length 4
(20) eap: Freeing handler
(20) [eap] = ok
(20) } # authenticate = ok
(20) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(20) post-auth {
(20) update {
(20) No attributes updated
(20) } # update = noop
(20) [exec] = noop
(20) policy remove_reply_message_if_eap {
(20) if (&reply:EAP-Message && &reply:Reply-Message) {
(20) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(20) else {
(20) [noop] = noop
(20) } # else = noop
(20) } # policy remove_reply_message_if_eap = noop
(20) } # post-auth = noop
(20) Sent Access-Accept Id 253 from 172.16.2.4:1812 to 10.225.251.10:52377 length 0
(20) MS-MPPE-Recv-Key = 0x8283e35b99b7b882bd65c95ec9192f5cecdda69b747efeebc9a46e2e9116023c
(20) MS-MPPE-Send-Key = 0xee65f3c0cb02806b88fb67d9496cf06c4a4834e6e2e4c6dcb2fa2d92d7db171f
(20) EAP-Message = 0x030a0004
(20) Message-Authenticator = 0x00000000000000000000000000000000
(20) User-Name = "testing"
(20) Finished request
Waking up in 4.6 seconds.
(21) Received Accounting-Request Id 254 from 10.225.251.10:52377 to 172.16.2.4:1813 length 218
(21) Acct-Status-Type = Start
(21) NAS-IP-Address = 10.225.251.10
(21) User-Name = "testing"
(21) NAS-Port = 0
(21) NAS-Port-Type = Wireless-802.11
(21) Calling-Station-Id = "06ad2e0b874b"
(21) Called-Station-Id = "removed"
(21) Framed-IP-Address = 10.225.251.60
(21) Acct-Multi-Session-Id = "06AD2E0B874B-1679732048"
(21) Acct-Session-Id = "F05C1986E387-06AD2E0B874B-641EAD51-695AE"
(21) Acct-Delay-Time = 0
(21) Aruba-Essid-Name = "wtf"
(21) Aruba-Location-Id = "Building-A"
(21) Aruba-User-Vlan = 51
(21) Acct-Authentic = 0
(21) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default
(21) preacct {
(21) [preprocess] = ok
(21) policy acct_unique {
(21) update request {
(21) &Tmp-String-9 := "ai:"
(21) } # update request = noop
(21) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(21) EXPAND %{hex:&Class}
(21) -->
(21) EXPAND ^%{hex:&Tmp-String-9}
(21) --> ^61693a
(21) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(21) else {
(21) update request {
(21) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(21) --> 972d51b6ddd250023babc6265b81f320
(21) &Acct-Unique-Session-Id := 972d51b6ddd250023babc6265b81f320
(21) } # update request = noop
(21) } # else = noop
(21) } # policy acct_unique = noop
(21) suffix: Checking for suffix after "@"
(21) suffix: No '@' in User-Name = "testing", looking up realm NULL
(21) suffix: No such realm "NULL"
(21) [suffix] = noop
(21) [files] = noop
(21) } # preacct = ok
(21) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default
(21) accounting {
(21) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(21) detail: --> /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(21) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(21) detail: EXPAND %t
(21) detail: --> Sat Mar 25 13:44:09 2023
(21) [detail] = ok
(21) [unix] = ok
(21) [exec] = noop
(21) attr_filter.accounting_response: EXPAND %{User-Name}
(21) attr_filter.accounting_response: --> testing
(21) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(21) [attr_filter.accounting_response] = updated
(21) } # accounting = updated
(21) Sent Accounting-Response Id 254 from 172.16.2.4:1813 to 10.225.251.10:52377 length 0
(21) Finished request
(21) Cleaning up request packet ID 254 with timestamp +63
Waking up in 4.6 seconds.
(11) Cleaning up request packet ID 244 with timestamp +63
(12) Cleaning up request packet ID 245 with timestamp +63
(13) Cleaning up request packet ID 246 with timestamp +63
(14) Cleaning up request packet ID 247 with timestamp +63
(15) Cleaning up request packet ID 248 with timestamp +63
(16) Cleaning up request packet ID 249 with timestamp +63
(17) Cleaning up request packet ID 250 with timestamp +63
(18) Cleaning up request packet ID 251 with timestamp +63
(19) Cleaning up request packet ID 252 with timestamp +63
(20) Cleaning up request packet ID 253 with timestamp +63
Ready to process requests


(22) Received Accounting-Request Id 255 from 10.225.251.10:52377 to 172.16.2.4:1813 length 242
(22) Acct-Status-Type = Interim-Update
(22) NAS-IP-Address = 10.225.251.10
(22) User-Name = "testing"
(22) NAS-Port = 0
(22) NAS-Port-Type = Wireless-802.11
(22) Calling-Station-Id = "0cf346e648f3"
(22) Called-Station-Id = "removed"
(22) Framed-IP-Address = 10.225.251.61
(22) Acct-Multi-Session-Id = "0CF346E648F3-1679732014"
(22) Acct-Session-Id = "F05C1986E387-0CF346E648F3-641EAD2F-9DA8F"
(22) Acct-Delay-Time = 0
(22) Aruba-Essid-Name = "wtf"
(22) Aruba-Location-Id = "Building-A"
(22) Aruba-User-Vlan = 51
(22) Acct-Input-Octets = 40285
(22) Acct-Output-Octets = 5625
(22) Acct-Input-Packets = 370
(22) Acct-Output-Packets = 31
(22) Acct-Session-Time = 51
(22) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default
(22) preacct {
(22) [preprocess] = ok
(22) policy acct_unique {
(22) update request {
(22) &Tmp-String-9 := "ai:"
(22) } # update request = noop
(22) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(22) EXPAND %{hex:&Class}
(22) -->
(22) EXPAND ^%{hex:&Tmp-String-9}
(22) --> ^61693a
(22) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(22) else {
(22) update request {
(22) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(22) --> f50bcba9a953cd64b2995ff219b0e0bc
(22) &Acct-Unique-Session-Id := f50bcba9a953cd64b2995ff219b0e0bc
(22) } # update request = noop
(22) } # else = noop
(22) } # policy acct_unique = noop
(22) suffix: Checking for suffix after "@"
(22) suffix: No '@' in User-Name = "testing", looking up realm NULL
(22) suffix: No such realm "NULL"
(22) [suffix] = noop
(22) [files] = noop
(22) } # preacct = ok
(22) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default
(22) accounting {
(22) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(22) detail: --> /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(22) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(22) detail: EXPAND %t
(22) detail: --> Sat Mar 25 13:44:26 2023
(22) [detail] = ok
(22) [unix] = noop
(22) [exec] = noop
(22) attr_filter.accounting_response: EXPAND %{User-Name}
(22) attr_filter.accounting_response: --> testing
(22) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(22) [attr_filter.accounting_response] = updated
(22) } # accounting = updated
(22) Sent Accounting-Response Id 255 from 172.16.2.4:1813 to 10.225.251.10:52377 length 0
(22) Finished request
(22) Cleaning up request packet ID 255 with timestamp +80
Ready to process requests
(23) Received Accounting-Request Id 1 from 10.225.251.10:52377 to 172.16.2.4:1813 length 242
(23) Acct-Status-Type = Interim-Update
(23) NAS-IP-Address = 10.225.251.10
(23) User-Name = "testing"
(23) NAS-Port = 0
(23) NAS-Port-Type = Wireless-802.11
(23) Calling-Station-Id = "06ad2e0b874b"
(23) Called-Station-Id = "removed"
(23) Framed-IP-Address = 10.225.251.60
(23) Acct-Multi-Session-Id = "06AD2E0B874B-1679732048"
(23) Acct-Session-Id = "F05C1986E387-06AD2E0B874B-641EAD51-695AE"
(23) Acct-Delay-Time = 0
(23) Aruba-Essid-Name = "wtf"
(23) Aruba-Location-Id = "Building-A"
(23) Aruba-User-Vlan = 51
(23) Acct-Input-Octets = 13616
(23) Acct-Output-Octets = 2231
(23) Acct-Input-Packets = 403
(23) Acct-Output-Packets = 14
(23) Acct-Session-Time = 18
(23) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default
(23) preacct {
(23) [preprocess] = ok
(23) policy acct_unique {
(23) update request {
(23) &Tmp-String-9 := "ai:"
(23) } # update request = noop
(23) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(23) EXPAND %{hex:&Class}
(23) -->
(23) EXPAND ^%{hex:&Tmp-String-9}
(23) --> ^61693a
(23) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(23) else {
(23) update request {
(23) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(23) --> 972d51b6ddd250023babc6265b81f320
(23) &Acct-Unique-Session-Id := 972d51b6ddd250023babc6265b81f320
(23) } # update request = noop
(23) } # else = noop
(23) } # policy acct_unique = noop
(23) suffix: Checking for suffix after "@"
(23) suffix: No '@' in User-Name = "testing", looking up realm NULL
(23) suffix: No such realm "NULL"
(23) [suffix] = noop
(23) [files] = noop
(23) } # preacct = ok
(23) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default
(23) accounting {
(23) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(23) detail: --> /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(23) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/10.225.251.10/detail-20230325
(23) detail: EXPAND %t
(23) detail: --> Sat Mar 25 13:44:26 2023
(23) [detail] = ok
(23) [unix] = noop
(23) [exec] = noop
(23) attr_filter.accounting_response: EXPAND %{User-Name}
(23) attr_filter.accounting_response: --> testing
(23) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(23) [attr_filter.accounting_response] = updated
(23) } # accounting = updated
(23) Sent Accounting-Response Id 1 from 172.16.2.4:1813 to 10.225.251.10:52377 length 0
(23) Finished request
(23) Cleaning up request packet ID 1 with timestamp +80
Ready to process requests

     On Wednesday, 22 March, 2023, 09:25:13 pm IST, Alan DeKok <aland at deployingradius.com> wrote:  
 
 On Mar 22, 2023, at 11:44 AM, Eby Mani via Freeradius-Users <freeradius-users at lists.freeradius.org> wrote:
>> You can reject a user when doing 802.1X authentication if their MAC does not match an expected MAC.
> 
> Are you talking about "authorized_macs" file or mac mapped(Calling-Station-Id) to particular user in users file ?.

  If that's where you want to put MAC addresses, yes.

>> The devices MAC comes in the RADIUS packet. So it is trivial to match a user to a particular device.
> 
> Is it not possible to grab Calling-Station-Id from Access-Request and check against db ?. 

  That's not what I said.

> Somewhere i read additional checks can be done with Calling-Station-Id when using PPP. Does this feature only work with PPP / SLIP ?.

  No.

  Alan DeKok.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html