eap_peap: ERROR: (TLS) Alert read:fatal:unknown CA

Dario Barbon dbarbon at olicom.eu
Fri Jan 5 18:11:00 UTC 2024


Hi Alan, I enabled mschapv2 section inside eap file and it works... 
thanks again for your support.

Regarding the source of my problems, I confirm you that Android 11 
devices continue to "lost"  the installed client certificate: this time 
I collected the logs as you suggested after the device lost the certificate.

FreeRADIUS Version 3.2.3
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/totp
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/files
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/rfc7542
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/canonicalization
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/tlcamb-tag
main {
  security {
      user = "operatore"
      group = "operatore"
      allow_core_dumps = no
  }
     name = "freeradius"
     prefix = "/usr"
     localstatedir = "/var"
     logdir = "/var/log/freeradius"
     run_dir = "/var/run/freeradius"
}
main {
     name = "freeradius"
     prefix = "/usr"
     localstatedir = "/var"
     sbindir = "/usr/sbin"
     logdir = "/var/log/freeradius"
     run_dir = "/var/run/freeradius"
     libdir = "/usr/lib/freeradius"
     radacctdir = "/var/log/freeradius/radacct"
     hostname_lookups = no
     max_request_time = 30
     cleanup_delay = 5
     max_requests = 16384
     postauth_client_lost = no
     pidfile = "/var/run/freeradius/freeradius.pid"
     checkrad = "/usr/sbin/checkrad"
     debug_level = 0
     proxy_requests = yes
  log {
      stripped_names = no
      auth = no
      auth_badpass = no
      auth_goodpass = no
      colourise = yes
      msg_denied = "You are already logged in - access denied"
  }
  resources {
  }
  security {
      max_attributes = 200
      reject_delay = 1.000000
      status_server = yes
  }
}
radiusd: #### Loading Realms and Home Servers ####
  proxy server {
      retry_delay = 5
      retry_count = 3
      default_fallback = no
      dead_time = 120
      wake_all_if_all_dead = no
  }
  home_server localhost {
      nonblock = no
      ipaddr = 127.0.0.1
      port = 1812
      type = "auth"
      secret = <<< secret >>>
      response_window = 20.000000
      response_timeouts = 1
      max_outstanding = 65536
      zombie_period = 40
      status_check = "status-server"
      ping_interval = 30
      check_interval = 30
      check_timeout = 4
      num_answers_to_alive = 3
      revive_interval = 120
   limit {
       max_connections = 16
       max_requests = 0
       lifetime = 0
       idle_timeout = 0
   }
   coa {
       irt = 2
       mrt = 16
       mrc = 5
       mrd = 30
   }
   recv_coa {
   }
  }
  home_server_pool my_auth_failover {
     type = fail-over
     home_server = localhost
  }
  realm example.com {
     auth_pool = my_auth_failover
  }
  realm LOCAL {
  }
radiusd: #### Loading Clients ####
  client localhost {
      ipaddr = 127.0.0.1
      require_message_authenticator = no
      secret = <<< secret >>>
      nas_type = "other"
      proto = "*"
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
  }
  client localhost_ipv6 {
      ipv6addr = ::1
      require_message_authenticator = no
      secret = <<< secret >>>
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
  }
  client TLC_TAG-MGT {
      ipaddr = 172.31.190.2
      require_message_authenticator = yes
      secret = <<< secret >>>
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
  }
Debugger not attached
systemd watchdog is disabled
  # Creating Auth-Type = mschap
  # Creating Auth-Type = eap
  # Creating Auth-Type = PAP
  # Creating Auth-Type = CHAP
  # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
  modules {
   # Loaded module rlm_always
   # Loading module "reject" from file /etc/freeradius/mods-enabled/always
   always reject {
       rcode = "reject"
       simulcount = 0
       mpp = no
   }
   # Loading module "fail" from file /etc/freeradius/mods-enabled/always
   always fail {
       rcode = "fail"
       simulcount = 0
       mpp = no
   }
   # Loading module "ok" from file /etc/freeradius/mods-enabled/always
   always ok {
       rcode = "ok"
       simulcount = 0
       mpp = no
   }
   # Loading module "handled" from file /etc/freeradius/mods-enabled/always
   always handled {
       rcode = "handled"
       simulcount = 0
       mpp = no
   }
   # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
   always invalid {
       rcode = "invalid"
       simulcount = 0
       mpp = no
   }
   # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
   always userlock {
       rcode = "userlock"
       simulcount = 0
       mpp = no
   }
   # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
   always notfound {
       rcode = "notfound"
       simulcount = 0
       mpp = no
   }
   # Loading module "noop" from file /etc/freeradius/mods-enabled/always
   always noop {
       rcode = "noop"
       simulcount = 0
       mpp = no
   }
   # Loading module "updated" from file /etc/freeradius/mods-enabled/always
   always updated {
       rcode = "updated"
       simulcount = 0
       mpp = no
   }
   # Loaded module rlm_detail
   # Loading module "auth_log" from file 
/etc/freeradius/mods-enabled/detail.log
   detail auth_log {
       filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
   }
   # Loading module "reply_log" from file 
/etc/freeradius/mods-enabled/detail.log
   detail reply_log {
       filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
   }
   # Loading module "pre_proxy_log" from file 
/etc/freeradius/mods-enabled/detail.log
   detail pre_proxy_log {
       filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
   }
   # Loading module "post_proxy_log" from file 
/etc/freeradius/mods-enabled/detail.log
   detail post_proxy_log {
       filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
   }
   # Loaded module rlm_expiration
   # Loading module "expiration" from file 
/etc/freeradius/mods-enabled/expiration
   # Loaded module rlm_pap
   # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
   pap {
       normalise = yes
   }
   # Loaded module rlm_logintime
   # Loading module "logintime" from file 
/etc/freeradius/mods-enabled/logintime
   logintime {
       minimum_timeout = 60
   }
   # Loaded module rlm_replicate
   # Loading module "replicate" from file 
/etc/freeradius/mods-enabled/replicate
   # Loaded module rlm_unpack
   # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
   # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
   detail {
       filename = 
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
   }
   # Loaded module rlm_exec
   # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
   exec echo {
       wait = yes
       program = "/bin/echo %{User-Name}"
       input_pairs = "request"
       output_pairs = "reply"
       shell_escape = yes
   }
   # Loaded module rlm_unix
   # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
   unix {
       radwtmp = "/var/log/freeradius/radwtmp"
   }
Creating attribute Unix-Group
   # Loaded module rlm_chap
   # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
   # Loaded module rlm_radutmp
   # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
   radutmp {
       filename = "/var/log/freeradius/radutmp"
       username = "%{User-Name}"
       case_sensitive = yes
       check_with_nas = yes
       permissions = 384
       caller_id = yes
   }
   # Loaded module rlm_linelog
   # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
   linelog {
       filename = "/var/log/freeradius/linelog"
       escape_filenames = no
       syslog_severity = "info"
       permissions = 384
       format = "This is a log message for %{User-Name}"
       reference = "messages.%{%{reply:Packet-Type}:-default}"
   }
   # Loading module "log_accounting" from file 
/etc/freeradius/mods-enabled/linelog
   linelog log_accounting {
       filename = "/var/log/freeradius/linelog-accounting"
       escape_filenames = no
       syslog_severity = "info"
       permissions = 384
       format = ""
       reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
   }
   # Loaded module rlm_soh
   # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
   soh {
       dhcp = yes
   }
   # Loaded module rlm_dynamic_clients
   # Loading module "dynamic_clients" from file 
/etc/freeradius/mods-enabled/dynamic_clients
   # Loaded module rlm_mschap
   # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
   mschap {
       use_mppe = yes
       require_encryption = no
       require_strong = no
       with_ntdomain_hack = yes
    passchange {
    }
       allow_retry = yes
       winbind_retry_with_normalised_username = no
   }
   # Loaded module rlm_utf8
   # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
   # Loaded module rlm_digest
   # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
   # Loading module "sradutmp" from file 
/etc/freeradius/mods-enabled/sradutmp
   radutmp sradutmp {
       filename = "/var/log/freeradius/sradutmp"
       username = "%{User-Name}"
       case_sensitive = yes
       check_with_nas = yes
       permissions = 420
       caller_id = no
   }
   # Loaded module rlm_realm
   # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
   realm IPASS {
       format = "prefix"
       delimiter = "/"
       ignore_default = no
       ignore_null = no
   }
   # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
   realm suffix {
       format = "suffix"
       delimiter = "@"
       ignore_default = no
       ignore_null = no
   }
   # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
   realm bangpath {
       format = "prefix"
       delimiter = "!"
       ignore_default = no
       ignore_null = no
   }
   # Loading module "realmpercent" from file 
/etc/freeradius/mods-enabled/realm
   realm realmpercent {
       format = "suffix"
       delimiter = "%"
       ignore_default = no
       ignore_null = no
   }
   # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
   realm ntdomain {
       format = "prefix"
       delimiter = "\\"
       ignore_default = no
       ignore_null = no
   }
   # Loading module "ntlm_auth" from file 
/etc/freeradius/mods-enabled/ntlm_auth
   exec ntlm_auth {
       wait = yes
       program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN 
--username=%{mschap:User-Name} --password=%{User-Password}"
       shell_escape = yes
   }
   # Loaded module rlm_eap
   # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
   eap {
       default_eap_type = "tls"
       timer_expire = 60
       max_eap_type = 52
       ignore_unknown_eap_types = yes
       cisco_accounting_username_bug = no
       max_sessions = 16384
   }
   # Loaded module rlm_passwd
   # Loading module "etc_passwd" from file 
/etc/freeradius/mods-enabled/passwd
   passwd etc_passwd {
       filename = "/etc/passwd"
       format = "*User-Name:Crypt-Password:"
       delimiter = ":"
       ignore_nislike = no
       ignore_empty = yes
       allow_multiple_keys = no
       hash_size = 100
   }
   # Loaded module rlm_totp
   # Loading module "totp" from file /etc/freeradius/mods-enabled/totp
   # Loaded module rlm_date
   # Loading module "date" from file /etc/freeradius/mods-enabled/date
   date {
       format = "%b %e %Y %H:%M:%S %Z"
       utc = no
   }
   # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
   date wispr2date {
       format = "%Y-%m-%dT%H:%M:%S"
       utc = no
   }
   # Loaded module rlm_preprocess
   # Loading module "preprocess" from file 
/etc/freeradius/mods-enabled/preprocess
   preprocess {
       huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
       hints = "/etc/freeradius/mods-config/preprocess/hints"
       with_ascend_hack = no
       ascend_channels_per_line = 23
       with_ntdomain_hack = no
       with_specialix_jetstream_hack = no
       with_cisco_vsa_hack = no
       with_alvarion_vsa_hack = no
   }
   # Loaded module rlm_attr_filter
   # Loading module "attr_filter.post-proxy" from file 
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.post-proxy {
       filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
       key = "%{Realm}"
       relaxed = no
   }
   # Loading module "attr_filter.pre-proxy" from file 
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.pre-proxy {
       filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
       key = "%{Realm}"
       relaxed = no
   }
   # Loading module "attr_filter.access_reject" from file 
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.access_reject {
       filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
       key = "%{User-Name}"
       relaxed = no
   }
   # Loading module "attr_filter.access_challenge" from file 
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.access_challenge {
       filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
       key = "%{User-Name}"
       relaxed = no
   }
   # Loading module "attr_filter.accounting_response" from file 
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.accounting_response {
       filename = 
"/etc/freeradius/mods-config/attr_filter/accounting_response"
       key = "%{User-Name}"
       relaxed = no
   }
   # Loading module "attr_filter.coa" from file 
/etc/freeradius/mods-enabled/attr_filter
   attr_filter attr_filter.coa {
       filename = "/etc/freeradius/mods-config/attr_filter/coa"
       key = "%{User-Name}"
       relaxed = no
   }
   # Loaded module rlm_expr
   # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
   expr {
       safe_characters = 
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: 
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
   }
   # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
   exec {
       wait = no
       input_pairs = "request"
       shell_escape = yes
       timeout = 10
   }
   # Loaded module rlm_files
   # Loading module "files" from file /etc/freeradius/mods-enabled/files
   files {
       filename = "/etc/freeradius/mods-config/files/authorize"
       acctusersfile = "/etc/freeradius/mods-config/files/accounting"
       preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
   }
   instantiate {
   }
   # Instantiating module "reject" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "fail" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
   # Instantiating module "handled" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "invalid" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "userlock" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "notfound" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "noop" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "updated" from file 
/etc/freeradius/mods-enabled/always
   # Instantiating module "auth_log" from file 
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in 
detail output
   # Instantiating module "reply_log" from file 
/etc/freeradius/mods-enabled/detail.log
   # Instantiating module "pre_proxy_log" from file 
/etc/freeradius/mods-enabled/detail.log
   # Instantiating module "post_proxy_log" from file 
/etc/freeradius/mods-enabled/detail.log
   # Instantiating module "expiration" from file 
/etc/freeradius/mods-enabled/expiration
   # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
   # Instantiating module "logintime" from file 
/etc/freeradius/mods-enabled/logintime
   # Instantiating module "detail" from file 
/etc/freeradius/mods-enabled/detail
   # Instantiating module "linelog" from file 
/etc/freeradius/mods-enabled/linelog
   # Instantiating module "log_accounting" from file 
/etc/freeradius/mods-enabled/linelog
   # Instantiating module "mschap" from file 
/etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
   # Instantiating module "IPASS" from file 
/etc/freeradius/mods-enabled/realm
   # Instantiating module "suffix" from file 
/etc/freeradius/mods-enabled/realm
   # Instantiating module "bangpath" from file 
/etc/freeradius/mods-enabled/realm
   # Instantiating module "realmpercent" from file 
/etc/freeradius/mods-enabled/realm
   # Instantiating module "ntdomain" from file 
/etc/freeradius/mods-enabled/realm
   # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
    # Linked to sub-module rlm_eap_tls
    tls {
        tls = "tls-common"
    }
    tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/certs"
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.key"
        certificate_file = "/etc/freeradius/certs/server.pem"
        ca_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = <<< secret >>>
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        ca_path_reload_interval = 0
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        reject_unknown_intermediate_ca = no
        ecdh_curve = "prime256v1"
        tls_max_version = "1.2"
        tls_min_version = "1.2"
     cache {
         enable = yes
         lifetime = 24
         max_entries = 255
         persist_dir = "/var/log/freeradius/tlscache"
     }
     verify {
         skip_if_ocsp_ok = no
         tmpdir = "/tmp/radiusd"
         client = "/usr/bin/openssl verify -CAfile 
/etc/freeradius/certs/ca.pem %{TLS-Client-Cert-Filename}"
     }
     ocsp {
         enable = no
         override_cert_url = yes
         url = "http://127.0.0.1/ocsp/"
         use_nonce = yes
         timeout = 0
         softfail = no
     }
    }
    # Linked to sub-module rlm_eap_ttls
    ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
    }
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_peap
    peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
    }
tls: Using cached TLS configuration from previous invocation
    # Linked to sub-module rlm_eap_mschapv2
    mschapv2 {
        with_ntdomain_hack = no
        send_error = no
        identity = "FreeRADIUS"
    }
   # Instantiating module "etc_passwd" from file 
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
   # Instantiating module "preprocess" from file 
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
   # Instantiating module "attr_filter.post-proxy" from file 
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
   # Instantiating module "attr_filter.pre-proxy" from file 
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
   # Instantiating module "attr_filter.access_reject" from file 
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
   # Instantiating module "attr_filter.access_challenge" from file 
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/mods-config/attr_filter/access_challenge
   # Instantiating module "attr_filter.accounting_response" from file 
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file 
/etc/freeradius/mods-config/attr_filter/accounting_response
   # Instantiating module "attr_filter.coa" from file 
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
   # Instantiating module "files" from file 
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/sites-enabled/tlcamb-tag
  # Loading authenticate {...}
Compiling Auth-Type MS-CHAP for attr Auth-Type
  # Loading authorize {...}
  # Loading preacct {...}
  # Loading accounting {...}
  # Loading session {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
  # Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
  # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
  # Loading session {...}
  # Loading post-proxy {...}
  # Loading post-auth {...}
  # Skipping contents of 'if' as it is always 'false' -- 
/etc/freeradius/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
       type = "auth"
       ipaddr = 127.0.0.1
       port = 18120
}
listen {
       type = "auth"
       ipaddr = *
       port = 1812
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812
Listening on proxy address * port 55078
Ready to process requests
(0) Received Access-Request Id 29 from 172.31.190.2:32773 to 
172.31.189.84:1812 length 298
(0)   User-Name = "Hera Certs Authority"
(0)   Chargeable-User-Identity = 0x00
(0)   Location-Capable = Civic-Location
(0)   Calling-Station-Id = "9a-8b-7b-d9-b0-cd"
(0)   Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag"
(0)   NAS-Port = 1
(0)   Cisco-AVPair = "audit-session-id=ac1fc70200000089659842c9"
(0)   Acct-Session-Id = "659842c9/9a:8b:7b:d9:b0:cd/142"
(0)   NAS-IP-Address = 172.31.190.2
(0)   NAS-Identifier = "Cisco_b8:24:65"
(0)   Airespace-Wlan-Id = 2
(0)   Service-Type = Framed-User
(0)   Framed-MTU = 1300
(0)   NAS-Port-Type = Wireless-802.11
(0)   Tunnel-Type:0 = VLAN
(0)   Tunnel-Medium-Type:0 = IEEE-802
(0)   Tunnel-Private-Group-Id:0 = "190"
(0)   EAP-Message = 0x02010019014865726120436572747320417574686f72697479
(0)   Message-Authenticator = 0x859db34773badd1d0180d10a1ff8aeed
(0) # Executing section authorize from file 
/etc/freeradius/sites-enabled/tlcamb-tag
(0)   authorize {
(0)     [preprocess] = ok
(0) eap: Peer sent EAP Response (code 2) ID 1 length 25
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the 
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: (TLS) Initiating new session
(0) eap_tls: (TLS) Setting verify mode to require certificate from client
(0) eap: Sending EAP Request (code 1) ID 2 length 6
(0) eap: EAP session adding &reply:State = 0x9293c9989291c4c7
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag
(0) session-state: Saving cached attributes
(0)   Framed-MTU = 994
(0) Sent Access-Challenge Id 29 from 172.31.189.84:1812 to 
172.31.190.2:32773 length 64
(0)   EAP-Message = 0x010200060d20
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x9293c9989291c4c7d042ac954afd7f3b
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 30 from 172.31.190.2:32773 to 
172.31.189.84:1812 length 297
(1)   User-Name = "Hera Certs Authority"
(1)   Chargeable-User-Identity = 0x00
(1)   Location-Capable = Civic-Location
(1)   Calling-Station-Id = "9a-8b-7b-d9-b0-cd"
(1)   Called-Station-Id = "04-5f-b9-81-69-80:PIT_Tag"
(1)   NAS-Port = 1
(1)   Cisco-AVPair = "audit-session-id=ac1fc70200000089659842c9"
(1)   Acct-Session-Id = "659842c9/9a:8b:7b:d9:b0:cd/142"
(1)   NAS-IP-Address = 172.31.190.2
(1)   NAS-Identifier = "Cisco_b8:24:65"
(1)   Airespace-Wlan-Id = 2
(1)   Service-Type = Framed-User
(1)   Framed-MTU = 1300
(1)   NAS-Port-Type = Wireless-802.11
(1)   Tunnel-Type:0 = VLAN
(1)   Tunnel-Medium-Type:0 = IEEE-802
(1)   Tunnel-Private-Group-Id:0 = "190"
(1)   EAP-Message = 0x020200060300
(1)   State = 0x9293c9989291c4c7d042ac954afd7f3b
(1)   Message-Authenticator = 0x7bb0df4e74c814803e896c7e15a6a274
(1) Restoring &session-state
(1)   &session-state:Framed-MTU = 994
(1) # Executing section authorize from file 
/etc/freeradius/sites-enabled/tlcamb-tag
(1)   authorize {
(1)     [preprocess] = ok
(1) eap: Peer sent EAP Response (code 2) ID 2 length 6
(1) eap: Ignoring NAK with request for unknown EAP type
(1)     [eap] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)   } # authorize = ok
(1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = 
Reject
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/freeradius/sites-enabled/tlcamb-tag
(1)   Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject:    --> Hera Certs Authority
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1)     [attr_filter.access_reject] = updated
(1)   } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 30 from 172.31.189.84:1812 to 
172.31.190.2:32773 length 20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 29 with timestamp +3 due to 
cleanup_delay was reached
(1) Cleaning up request packet ID 30 with timestamp +3 due to 
cleanup_delay was reached

Thanks.

Dario Barbon



Il 05/01/2024 18:30, Alan DeKok ha scritto:
> On Jan 5, 2024, at 11:25 AM, Dario Barbon <dbarbon at olicom.eu> wrote:
>> I installed the CA certificate and collected the entire log file content:
>    This page gives a good overview of what to look for: http://wiki.freeradius.org/radiusd-X
>
>    Simply lookiing for the word "error" gives you this:
>
>> (6) eap_peap: Serialising session 28598cb4ba77510a52abb1e63011f9c061077719c09a59908092e2ca6b9c1ffd, and storing in cache
>> (6) eap_peap: ERROR: (TLS) Session serialisation failed, failed opening session file /var/log/freeradius/tlscache/28598cb4ba77510a52abb1e63011f9c061077719c09a59908092e2ca6b9c1ffd.asn1: Permission denied
>    And looking for more "error" gives you this:
>
>> (8) eap: Peer sent packet with method EAP Identity (1)
>> (8) eap: ERROR: Tried to start unsupported EAP type MSCHAPv2 (26)
>> (8) eap: Sending EAP Failure (code 4) ID 9 length 4
>    You edited the mods-available/eap file, deleted the "mschapv2" configuration, and then tried to do EAP-MSCHAPv2.
>
>    If you want to use EAP-MSCHAPv2, then enable the mschapv2 EAP configuration.
>
>    And read the debug output.  Honestly.  99% of problems can be solved by just looking for "error" and going "whoops, that message is pretty clear".
>
>    Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html


More information about the Freeradius-Users mailing list