Google LDAP Authentication for WIFI Setup issues
Joseph Allen
joseph.l.allen at gmail.com
Fri Nov 8 02:16:37 UTC 2024
Thanks, I feel like that got me moving in the right direction. My mistake
before I removed the default was not recognizing/understanding the
google-ldap-auth was a virtual server / tunnel.
I put the default back in, and removed the "inner-tunnel" from the
sites-enabled.
Then updated mods-enabled/eap virtual_server to point to google-ldap-auth.
I also renamed the virtual server to "google-ldap-auth" to match the file
name...that one bugged me and made me spend 15 minutes chasing down why it
couldn't find the virtual server.
I also updated the default->authorize->ldap section to this:
ldap_google
#
# If you're using Active Directory and PAP, then uncomment
# the following lines, and the "Auth-Type LDAP" section below.
#
# This will let you do PAP authentication to AD.
#
if ((ok || updated) && User-Password && !control:Auth-Type) {
update control {
&Auth-Type := ldap
}
}
It's now doing a lot more, but still basically failing in the same spot on
the IF statement looking for a password. Here's the full log:
FreeRADIUS Version 3.2.1
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/ldap_google
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file
/etc/freeradius/3.0/sites-enabled/google-ldap-auth
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
postauth_client_lost = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
recv_coa {
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client 192.168.52.1 {
ipaddr = 192.168.52.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_ldap
# Loading module "ldap_google" from file
/etc/freeradius/3.0/mods-enabled/ldap_google
ldap ldap_google {
server = "ldaps://ldap.google.com:636"
identity = "GoogleUserName"
password = <<< secret >>>
sasl {
}
user_dn = "LDAP-UserDn"
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
allow_dangling_group_ref = no
}
client {
scope = "sub"
base_dn = ""
}
profile {
}
options {
ldap_debug = 0
chase_referrals = no
net_timeout = 10
res_timeout = 10
srv_timelimit = 10
idle = 60
probes = 3
interval = 3
}
tls {
certificate_file = "/etc/freeradius/3.0/certs/ldap-client.crt"
private_key_file = "/etc/freeradius/3.0/certs/ldap-client.key"
tls_min_version = "1.2"
start_tls = no
require_cert = "allow"
}
}
Creating attribute ldap_google-LDAP-Group
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile =
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_cache
# Loading module "cache_auth_accept" from file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
cache cache_auth_accept {
driver = "rlm_cache_rbtree"
key =
"%{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}}"
ttl = 7200
max_entries = 0
epoch = 0
add_stats = no
}
# Loading module "cache_auth_reject" from file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
cache cache_auth_reject {
driver = "rlm_cache_rbtree"
key =
"%{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}}"
ttl = 3600
max_entries = 0
epoch = 0
add_stats = no
}
# Loading module "cache_ldap_user_dn" from file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
cache cache_ldap_user_dn {
driver = "rlm_cache_rbtree"
key = "%{Stripped-User-Name}"
ttl = 86400
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_detail
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
instantiate {
}
# Instantiating module "ldap_google" from file
/etc/freeradius/3.0/mods-enabled/ldap_google
rlm_ldap: libldap vendor: OpenLDAP, version: 20513
rlm_ldap (ldap_google): Couldn't find configuration for accounting, will
return NOOP for calls from this section
rlm_ldap (ldap_google): Couldn't find configuration for post-auth, will
return NOOP for calls from this section
rlm_ldap (ldap_google): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap_google): Opening additional connection (0), 1 of 32 pending
slots used
rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap_google): Waiting for bind result...
rlm_ldap (ldap_google): Bind successful
rlm_ldap (ldap_google): Opening additional connection (1), 1 of 31 pending
slots used
rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap_google): Waiting for bind result...
rlm_ldap (ldap_google): Bind successful
rlm_ldap (ldap_google): Opening additional connection (2), 1 of 30 pending
slots used
rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap_google): Waiting for bind result...
rlm_ldap (ldap_google): Bind successful
rlm_ldap (ldap_google): Opening additional connection (3), 1 of 29 pending
slots used
rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap_google): Waiting for bind result...
rlm_ldap (ldap_google): Bind successful
rlm_ldap (ldap_google): Opening additional connection (4), 1 of 28 pending
slots used
rlm_ldap (ldap_google): Connecting to ldaps://ldap.google.com:636
rlm_ldap (ldap_google): Waiting for bind result...
rlm_ldap (ldap_google): Bind successful
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = yes
lifetime = 24
name = "EAP module"
max_entries = 255
persist_dir = "/var/log/freeradius/tlscache"
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "google-ldap-auth"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "google-ldap-auth"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "cache_auth_accept" from file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
rlm_cache (cache_auth_accept): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "cache_auth_reject" from file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
rlm_cache (cache_auth_reject): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "cache_ldap_user_dn" from file
/etc/freeradius/3.0/mods-enabled/cache_auth_accept
rlm_cache (cache_ldap_user_dn): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server google-ldap-auth { # from file
/etc/freeradius/3.0/sites-enabled/google-ldap-auth
# Loading authenticate {...}
Compiling Auth-Type LDAP for attr Auth-Type
# Loading authorize {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server google-ldap-auth
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = *
port = 18123
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address * port 18123 bound to server google-ldap-auth
Listening on proxy address * port 47770
Listening on proxy address :: port 45249
Ready to process requests
(0) Received Access-Request Id 29 from 192.168.52.1:38208 to
192.168.52.155:1812 length 289
(0) User-Name = "user at domain.com"
(0) NAS-IP-Address = 127.0.0.1
(0) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) Calling-Station-Id = "BE-35-1A-04-D3-70"
(0) Connect-Info = "CONNECT 11Mbps 802.11g"
(0) Acct-Session-Id = "E03E415D08DB704D"
(0) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(0) WLAN-Pairwise-Cipher = 1027076
(0) WLAN-Group-Cipher = 1027076
(0) WLAN-AKM-Suite = 1027077
(0) WLAN-Group-Mgmt-Cipher = 1027078
(0) Framed-MTU = 1400
(0) EAP-Message =
0x02660026016a6f736570682e616c6c656e40696e636c75736976656f7074696f6e732e636f6d
(0) Message-Authenticator = 0x3620d26eca848c27881a65a03ae065b2
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(0) suffix: No such realm "domain.com"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 102 length 38
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 103 length 22
(0) eap: EAP session adding &reply:State = 0x6594711165f37594
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 29 from 192.168.52.155:1812 to
192.168.52.1:38208 length 80
(0) EAP-Message = 0x016700160410587aa6b83ffafd5af4e63697ce205304
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x6594711165f375948f44f3aaf0343c30
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 30 from 192.168.52.1:38208 to
192.168.52.155:1812 length 277
(1) User-Name = "user at domain.com"
(1) NAS-IP-Address = 127.0.0.1
(1) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) Calling-Station-Id = "BE-35-1A-04-D3-70"
(1) Connect-Info = "CONNECT 11Mbps 802.11g"
(1) Acct-Session-Id = "E03E415D08DB704D"
(1) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(1) WLAN-Pairwise-Cipher = 1027076
(1) WLAN-Group-Cipher = 1027076
(1) WLAN-AKM-Suite = 1027077
(1) WLAN-Group-Mgmt-Cipher = 1027078
(1) Framed-MTU = 1400
(1) EAP-Message = 0x026700080319152b
(1) State = 0x6594711165f375948f44f3aaf0343c30
(1) Message-Authenticator = 0xb06303485a90f1aa92af5ea4a3f866cb
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(1) suffix: No such realm "domain.com"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 103 length 8
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x6594711165f37594
(1) eap: Finished EAP session with state 0x6594711165f37594
(1) eap: Previous EAP request found for state 0x6594711165f37594, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: (TLS) Initiating new session
(1) eap: Sending EAP Request (code 1) ID 104 length 6
(1) eap: EAP session adding &reply:State = 0x6594711164fc6894
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1) Framed-MTU = 994
(1) Sent Access-Challenge Id 30 from 192.168.52.155:1812 to
192.168.52.1:38208 length 64
(1) EAP-Message = 0x016800061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x6594711164fc68948f44f3aaf0343c30
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 31 from 192.168.52.1:38208 to
192.168.52.155:1812 length 430
(2) User-Name = "user at domain.com"
(2) NAS-IP-Address = 127.0.0.1
(2) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(2) NAS-Port-Type = Wireless-802.11
(2) Service-Type = Framed-User
(2) Calling-Station-Id = "BE-35-1A-04-D3-70"
(2) Connect-Info = "CONNECT 11Mbps 802.11g"
(2) Acct-Session-Id = "E03E415D08DB704D"
(2) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(2) WLAN-Pairwise-Cipher = 1027076
(2) WLAN-Group-Cipher = 1027076
(2) WLAN-AKM-Suite = 1027077
(2) WLAN-Group-Mgmt-Cipher = 1027078
(2) Framed-MTU = 1400
(2) EAP-Message =
0x026800a119800000009716030100920100008e0303672d71ae05a217b960e57b46b72d65897653943ae9637c2e8469156e90e053cf00002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000
(2) State = 0x6594711164fc68948f44f3aaf0343c30
(2) Message-Authenticator = 0x80d17896af34c48d161f4f37f29454a7
(2) Restoring &session-state
(2) &session-state:Framed-MTU = 994
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(2) suffix: No such realm "domain.com"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 104 length 161
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x6594711164fc6894
(2) eap: Finished EAP session with state 0x6594711164fc6894
(2) eap: Previous EAP request found for state 0x6594711164fc6894, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: (TLS) EAP Peer says that the final record size will be 151
bytes
(2) eap_peap: (TLS) EAP Got all data (151 bytes)
(2) eap_peap: (TLS) Handshake state - before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server
done
(2) eap_peap: (TLS) In Handshake Phase
(2) eap: Sending EAP Request (code 1) ID 105 length 1004
(2) eap: EAP session adding &reply:State = 0x6594711167fd6894
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2) Framed-MTU = 994
(2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 31 from 192.168.52.155:1812 to
192.168.52.1:38208 length 1068
(2) EAP-Message =
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
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x6594711167fd68948f44f3aaf0343c30
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 32 from 192.168.52.1:38208 to
192.168.52.155:1812 length 275
(3) User-Name = "user at domain.com"
(3) NAS-IP-Address = 127.0.0.1
(3) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(3) NAS-Port-Type = Wireless-802.11
(3) Service-Type = Framed-User
(3) Calling-Station-Id = "BE-35-1A-04-D3-70"
(3) Connect-Info = "CONNECT 11Mbps 802.11g"
(3) Acct-Session-Id = "E03E415D08DB704D"
(3) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(3) WLAN-Pairwise-Cipher = 1027076
(3) WLAN-Group-Cipher = 1027076
(3) WLAN-AKM-Suite = 1027077
(3) WLAN-Group-Mgmt-Cipher = 1027078
(3) Framed-MTU = 1400
(3) EAP-Message = 0x026900061900
(3) State = 0x6594711167fd68948f44f3aaf0343c30
(3) Message-Authenticator = 0xb7ab9cd980604676ff09a2de63b10a07
(3) Restoring &session-state
(3) &session-state:Framed-MTU = 994
(3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(3) suffix: No such realm "domain.com"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 105 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x6594711167fd6894
(3) eap: Finished EAP session with state 0x6594711167fd6894
(3) eap: Previous EAP request found for state 0x6594711167fd6894, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 106 length 230
(3) eap: EAP session adding &reply:State = 0x6594711166fe6894
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3) Framed-MTU = 994
(3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 32 from 192.168.52.155:1812 to
192.168.52.1:38208 length 288
(3) EAP-Message =
0x016a00e61900ead8b9ff57d7ac097e53684a814a95bfdfb4bb77654a13ea27cd6bc48ed253b8a9b7356fe46c93cec983f8a3ed2e15c5bb2bccfb1fc045596198e7f03c751a8afdcd56b1825246070ad1822c37ae7d4d3176ff015fe476540134e8aca8da37adbd25daa2d9bdf957fc899960a725b3a5f104a104b7e9dd0e55ce65ee2275e2fb6c5326c5fcc06ad547b5f53b7292ee141ff5a7231544ac5a5555cd444edb599477dc931fae32f0faf0dbde02b2b5f1db454a29fff7e85562f1d9b07caa6f5729d96a308a8ec793c90d90c6632b84d3b1b44cea5ab97b4016030300040e000000
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x6594711166fe68948f44f3aaf0343c30
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 33 from 192.168.52.1:38208 to
192.168.52.155:1812 length 405
(4) User-Name = "user at domain.com"
(4) NAS-IP-Address = 127.0.0.1
(4) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(4) NAS-Port-Type = Wireless-802.11
(4) Service-Type = Framed-User
(4) Calling-Station-Id = "BE-35-1A-04-D3-70"
(4) Connect-Info = "CONNECT 11Mbps 802.11g"
(4) Acct-Session-Id = "E03E415D08DB704D"
(4) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(4) WLAN-Pairwise-Cipher = 1027076
(4) WLAN-Group-Cipher = 1027076
(4) WLAN-AKM-Suite = 1027077
(4) WLAN-Group-Mgmt-Cipher = 1027078
(4) Framed-MTU = 1400
(4) EAP-Message =
0x026a008819800000007e16030300461000004241049bf2eb3d5718d69b7910403ff0bcc2c5ac61d622336d032e95feb8408a2d4085ab4735654cdd25dadb32d3ca5e6e1fb21e6119ced35e6622a26658754abde59e1403030001011603030028d62de99c00bda581cecfadcbb794986d3cec3e11b8335a19a0046b3989fb2cb4fc346b7b53594aa7
(4) State = 0x6594711166fe68948f44f3aaf0343c30
(4) Message-Authenticator = 0x159369f18c33374c9dd3988c1a494b0f
(4) Restoring &session-state
(4) &session-state:Framed-MTU = 994
(4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(4) suffix: No such realm "domain.com"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 106 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x6594711166fe6894
(4) eap: Finished EAP session with state 0x6594711166fe6894
(4) eap: Previous EAP request found for state 0x6594711166fe6894, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: (TLS) EAP Peer says that the final record size will be 126
bytes
(4) eap_peap: (TLS) EAP Got all data (126 bytes)
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key
exchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher
spec
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished
(4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher
spec
(4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished
(4) eap_peap: Serialising session
7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa, and
storing in cache
(4) eap_peap: WARNING: (TLS) Wrote session
7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa to
/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1
(144 bytes)
(4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully
(4) eap_peap: (TLS) Connection Established
(4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_peap: TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 107 length 57
(4) eap: EAP session adding &reply:State = 0x6594711161ff6894
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4) Framed-MTU = 994
(4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(4) TLS-Cache-Filename =
"/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1"
(4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 33 from 192.168.52.155:1812 to
192.168.52.1:38208 length 115
(4) EAP-Message =
0x016b003919001403030001011603030028befa84ba2b2231e9877d27f3096069eee289d0d7683a429917aeba06c2a3549e29f6149ef77e930c
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x6594711161ff68948f44f3aaf0343c30
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 34 from 192.168.52.1:38208 to
192.168.52.155:1812 length 275
(5) User-Name = "user at domain.com"
(5) NAS-IP-Address = 127.0.0.1
(5) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(5) NAS-Port-Type = Wireless-802.11
(5) Service-Type = Framed-User
(5) Calling-Station-Id = "BE-35-1A-04-D3-70"
(5) Connect-Info = "CONNECT 11Mbps 802.11g"
(5) Acct-Session-Id = "E03E415D08DB704D"
(5) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(5) WLAN-Pairwise-Cipher = 1027076
(5) WLAN-Group-Cipher = 1027076
(5) WLAN-AKM-Suite = 1027077
(5) WLAN-Group-Mgmt-Cipher = 1027078
(5) Framed-MTU = 1400
(5) EAP-Message = 0x026b00061900
(5) State = 0x6594711161ff68948f44f3aaf0343c30
(5) Message-Authenticator = 0x7d4410875064acdb5db66a1a5aa4978c
(5) Restoring &session-state
(5) &session-state:Framed-MTU = 994
(5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(5) &session-state:TLS-Cache-Filename =
"/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1"
(5) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(5) &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(5) suffix: No such realm "domain.com"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 107 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x6594711161ff6894
(5) eap: Finished EAP session with state 0x6594711161ff6894
(5) eap: Previous EAP request found for state 0x6594711161ff6894, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is
finished
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 108 length 40
(5) eap: EAP session adding &reply:State = 0x6594711160f86894
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5) Framed-MTU = 994
(5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5) TLS-Cache-Filename =
"/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1"
(5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5) TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 34 from 192.168.52.155:1812 to
192.168.52.1:38208 length 98
(5) EAP-Message =
0x016c00281900170303001dbefa84ba2b2231eae61795a7d3ee545fdbea86fdf8c0357589dd790803
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x6594711160f868948f44f3aaf0343c30
(5) Finished request
Waking up in 4.8 seconds.
(6) Received Access-Request Id 35 from 192.168.52.1:38208 to
192.168.52.155:1812 length 338
(6) User-Name = "user at domain.com"
(6) NAS-IP-Address = 127.0.0.1
(6) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) Calling-Station-Id = "BE-35-1A-04-D3-70"
(6) Connect-Info = "CONNECT 11Mbps 802.11g"
(6) Acct-Session-Id = "E03E415D08DB704D"
(6) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027077
(6) WLAN-Group-Mgmt-Cipher = 1027078
(6) Framed-MTU = 1400
(6) EAP-Message =
0x026c00451900170303003ad62de99c00bda5825c3e15e59224e3fc887d301dbac34c4e8eff25bbab28f535af5fd03aa0081305168fb73ae3593d6f1bd7f323186aa37d2a71
(6) State = 0x6594711160f868948f44f3aaf0343c30
(6) Message-Authenticator = 0x804c8d36e96d0ec621de0537c66a8fad
(6) Restoring &session-state
(6) &session-state:Framed-MTU = 994
(6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(6) &session-state:TLS-Cache-Filename =
"/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1"
(6) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(6) &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(6) suffix: No such realm "domain.com"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 108 length 69
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x6594711160f86894
(6) eap: Finished EAP session with state 0x6594711160f86894
(6) eap: Previous EAP request found for state 0x6594711160f86894, released
from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: (TLS) EAP Done initial handshake
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - user at domain.com
(6) eap_peap: Got inner identity 'user at domain.com'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message =
0x026c0026016a6f736570682e616c6c656e40696e636c75736976656f7074696f6e732e636f6d
(6) eap_peap: Setting User-Name to user at domain.com
(6) eap_peap: Sending tunneled request to google-ldap-auth
(6) eap_peap: EAP-Message =
0x026c0026016a6f736570682e616c6c656e40696e636c75736976656f7074696f6e732e636f6d
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "user at domain.com"
(6) Virtual server google-ldap-auth received request
(6) EAP-Message =
0x026c0026016a6f736570682e616c6c656e40696e636c75736976656f7074696f6e732e636f6d
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "user at domain.com"
(6) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(6) server google-ldap-auth {
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/google-ldap-auth
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) policy split_username_nai {
(6) if (&User-Name && (&User-Name =~
/^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(6) if (&User-Name && (&User-Name =~
/^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) -> TRUE
(6) if (&User-Name && (&User-Name =~
/^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(6) update request {
(6) EXPAND %{1}
(6) --> user
(6) &Stripped-User-Name := user
(6) } # update request = noop
(6) if ("%{3}" != '') {
(6) EXPAND %{3}
(6) --> domain.com
(6) if ("%{3}" != '') -> TRUE
(6) if ("%{3}" != '') {
(6) update request {
(6) EXPAND %{3}
(6) --> domain.com
(6) &Stripped-User-Domain = domain.com
(6) } # update request = noop
(6) } # if ("%{3}" != '') = noop
(6) [updated] = updated
(6) } # if (&User-Name && (&User-Name =~
/^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) = updated
(6) ... skipping else: Preceding "if" was taken
(6) } # policy split_username_nai = updated
(6) update control {
(6) &Cache-Status-Only := yes
(6) } # update control = noop
(6) cache_auth_accept: EXPAND
%{md5:%{%{Stripped-User-Name}:-%{User-Name}}%{User-Password}}
(6) cache_auth_accept: --> d1f8a687b75428f7b2387ad935b90bbd
(6) cache_auth_accept: No cache entry found for
"d1f8a687b75428f7b2387ad935b90bbd"
(6) [cache_auth_accept] = notfound
(6) if (ok) {
(6) if (ok) -> FALSE
(6) update control {
(6) &Cache-Status-Only := yes
(6) } # update control = noop
(6) cache_auth_reject: EXPAND
%{md5:%{Calling-Station-Id}%{Stripped-User-Name}%{User-Password}}
(6) cache_auth_reject: --> d1f8a687b75428f7b2387ad935b90bbd
(6) cache_auth_reject: No cache entry found for
"d1f8a687b75428f7b2387ad935b90bbd"
(6) [cache_auth_reject] = notfound
(6) if (ok) {
(6) if (ok) -> FALSE
(6) if (&User-Password && !control:Auth-Type) {
(6) if (&User-Password && !control:Auth-Type) -> FALSE
(6) } # authorize = updated
(6) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject
(6) Failed to authenticate the user
(6) Using Post-Auth-Type Reject
(6) # Executing group from file
/etc/freeradius/3.0/sites-enabled/google-ldap-auth
(6) Post-Auth-Type REJECT {
(6) attr_filter.access_reject: EXPAND %{User-Name}
(6) attr_filter.access_reject: --> user at domain.com
(6) attr_filter.access_reject: Matched entry DEFAULT at line 11
(6) [attr_filter.access_reject] = updated
(6) if (&control:Auth-Type == ldap) {
(6) ERROR: Failed retrieving values required to evaluate condition
(6) update control {
(6) &Cache-TTL := 0
(6) } # update control = noop
(6) cache_ldap_user_dn: EXPAND %{Stripped-User-Name}
(6) cache_ldap_user_dn: --> user
(6) cache_ldap_user_dn: No cache entry found for "user"
(6) cache_ldap_user_dn: Creating new cache entry
(6) cache_ldap_user_dn: Merging cache entry into request
(6) cache_ldap_user_dn: Committed entry, TTL 86400 seconds
(6) [cache_ldap_user_dn] = updated
(6) } # Post-Auth-Type REJECT = updated
(6) Login incorrect (No Auth-Type found: rejecting the user via
Post-Auth-Type = Reject): [user at domain.com/<no User-Password attribute>]
(from client 192.168.52.1 port 0 via TLS tunnel)
(6) } # server google-ldap-auth
(6) Virtual server sending reply
(6) eap_peap: Got tunneled reply code 3
(6) eap_peap: Got tunneled reply RADIUS code 3
(6) eap_peap: Tunneled authentication was rejected
(6) eap_peap: FAILURE
(6) eap: Sending EAP Request (code 1) ID 109 length 46
(6) eap: EAP session adding &reply:State = 0x6594711163f96894
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6) Framed-MTU = 994
(6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6) TLS-Cache-Filename =
"/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1"
(6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6) TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 35 from 192.168.52.155:1812 to
192.168.52.1:38208 length 104
(6) EAP-Message =
0x016d002e19001703030023befa84ba2b2231ebbbff115528afb895c7716ed6967bf51d7d938ec4bf32e770249a0f
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x6594711163f968948f44f3aaf0343c30
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 36 from 192.168.52.1:38208 to
192.168.52.155:1812 length 315
(7) User-Name = "user at domain.com"
(7) NAS-IP-Address = 127.0.0.1
(7) Called-Station-Id = "7A-7F-54-27-FD-31:WIFI-SSID"
(7) NAS-Port-Type = Wireless-802.11
(7) Service-Type = Framed-User
(7) Calling-Station-Id = "BE-35-1A-04-D3-70"
(7) Connect-Info = "CONNECT 11Mbps 802.11g"
(7) Acct-Session-Id = "E03E415D08DB704D"
(7) Acct-Multi-Session-Id = "EC4594015FC21B4E"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027077
(7) WLAN-Group-Mgmt-Cipher = 1027078
(7) Framed-MTU = 1400
(7) EAP-Message =
0x026d002e19001703030023d62de99c00bda583c7fc5bb35883b5409fab2e6daf774ed4654a19f2e7d501e6b24683
(7) State = 0x6594711163f968948f44f3aaf0343c30
(7) Message-Authenticator = 0x0c5f46e8ab96becea7bf053e23e77d95
(7) Restoring &session-state
(7) &session-state:Framed-MTU = 994
(7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(7) &session-state:TLS-Cache-Filename =
"/var/log/freeradius/tlscache/7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa.asn1"
(7) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(7) &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "domain.com" for User-Name = "user at domain.com"
(7) suffix: No such realm "domain.com"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 109 length 46
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x6594711163f96894
(7) eap: Finished EAP session with state 0x6594711163f96894
(7) eap: Previous EAP request found for state 0x6594711163f96894, released
from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: (TLS) EAP Done initial handshake
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state send tlv failure
(7) eap_peap: Received EAP-TLV response
(7) eap_peap: ERROR: The users session was previously rejected: returning
reject (again.)
(7) eap_peap: This means you need to read the PREVIOUS messages in the
debug output
(7) eap_peap: to find out the reason why the user was rejected
(7) eap_peap: Look for "reject" or "fail". Those earlier messages will
tell you
(7) eap_peap: what went wrong, and how to fix the problem
tls: Removing session
7a93a98259e9c8afcea3aa20893c53ce5c18812faeedf082b587de9f984fceaa from the
cache
(7) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
failed
(7) eap: Sending EAP Failure (code 4) ID 109 length 4
(7) eap: Failed in EAP select
(7) [eap] = invalid
(7) } # authenticate = invalid
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> user at domain.com
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) [eap] = noop
(7) policy remove_reply_message_if_eap {
(7) if (&reply:EAP-Message && &reply:Reply-Message) {
(7) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(7) else {
(7) [noop] = noop
(7) } # else = noop
(7) } # policy remove_reply_message_if_eap = noop
(7) } # Post-Auth-Type REJECT = updated
(7) Login incorrect (eap_peap: The users session was previously rejected:
returning reject (again.)): [user at domain.com/<via Auth-Type = eap>] (from
client 192.168.52.1 port 0 cli BE-35-1A-04-D3-70)
(7) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(7) Sending delayed response
(7) Sent Access-Reject Id 36 from 192.168.52.155:1812 to 192.168.52.1:38208
length 44
(7) EAP-Message = 0x046d0004
(7) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
On Thu, Nov 7, 2024 at 6:27 PM Matthew Newton via Freeradius-Users <
freeradius-users at lists.freeradius.org> wrote:
>
>
> On 07/11/2024 22:47, Joseph Allen wrote:
> > Next I moved that file to the enabled mods folder as well as moving the
> > google-ldap-auth file to the sites-enable folder. (I say move, I did a
> > symbolic link). After lots of troubleshooting, I removed the default from
> > the sites-enabled just to try and simplify everything.
>
> Here's your problem.
>
> > First I ran into issues with the filter_inner_identity, I don't quite
> > understand why that is failing, but I saw somewhere else that is not
> > needed, so I commented it out. Now I keep seeing this:
>
> That's fine, not everyone needs it.
>
> > (0) Received Access-Request Id 26 from 192.168.52.1:59099 to
> > 192.168.52.155:1812 length 249
> ...
> > (0) EAP-Message = 0x027b0012017465737440746573742e636f6d
>
> EAP
>
> > (0) Message-Authenticator = 0xf88e64c655b98a2aa22e62a2844fe21d
> > (0) # Executing section authorize from file
> > /etc/freeradius/3.0/sites-enabled/google-ldap-auth
> > (0) authorize {
> ...
>
> there was no "eap" in there.
>
> > (0) if (&User-Password && !control:Auth-Type) {
> > (0) if (&User-Password && !control:Auth-Type) -> FALSE
> > (0) } # authorize = updated
> > (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> > Reject
> > (0) Failed to authenticate the user
>
> > So the big question, is why is there no password? I am testing with my
> > iPad, and I am typing in a password when connecting to the Wifi. The wifi
> > config is set to WPA Enterprise.
>
> You removed the default server, and therefore the call to the eap
> module. The comments at the top of the google-ldap configuration say it
> is the inner tunnel virtual server. Sending wifi auth to it directly
> won't work, as it's for an EAP inner method (specifically, EAP-TTLS/PAP
> only, as that's the only commonly used one that has a clear text
> password to use).
>
> You need to add the default virtual server back in again, then configure
> the relevant (TTLS) "virtual_server" in mods-enabled/eap to point to
> "google-ldap" instead of "inner-tunnel" (the default).
>
> Best still, go back to the default configuration, add your user to the
> "users" file, and get the basics working. Once you have done that you
> can remove or change one thing at a time and then you'll whether what
> you have done has broken anything or not. Using version control is
> useful for this.
>
> --
> Matthew
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list