Windows Slow EAP-TLS Authentication
Luca Borruto
luca.borruto at agicap.com
Tue Sep 17 16:48:07 UTC 2024
Hey!
<<all logs at the end>>
We're currently running FreeRADIUS version 3.2.6 on an Azure VM (running
debian 11.11), handling EAP-TLS authentication for our network.
The setup includes Cisco Meraki access points onsite and we're distributing
SCEP certificates and WiFi profiles through Intune.
The setup seems a bit weird but we only have an Azure AD so we can't use an
on-premise NPS classic server (and cloud PKI/Radius are too expensive for
our company).
The problem is with Windows clients taking a long time (about 45 seconds)
during the "Checking Network Requirements" phase of authentication.
Android devices reconnect almost instantly without even appearing in the
logs, and macOS seems relatively fast, but Windows remains significantly
slower.
We’ve already disabled OCSP revocation checks, so it seems not to be the
issue here.
The cache module is enabled, but does not seems to be used.
Latency to the Azure-hosted FreeRADIUS server seems reasonable based on
traceroutes, and authentication works; it's just the speed on Windows
that’s problematic.
Has anyone else faced similar performance issues with Windows clients?
Could the cloud-hosted FreeRADIUS server be the bottleneck here? I would
greatly appreciate any insight on optimizing FreeRADIUS or tuning Windows.
Thanks for any help!
**Wifi Configuration settings**
```
- Wi-Fi type: Enterprise
- Connect automatically when in range: Yes
- Connect to more preferred network if available: Yes
- Connect to this network, even when it is not broadcasting its SSID: Yes
- Metered Connection Limit: Unrestricted
- Authentication Mode: Machine
- Remember credentials at each logon: Not configured
- Authentication period: Not configured
- Authentication retry delay period: Not configured
- Start period: Not configured
- Maximum EAPOL-start: 3
- Maximum authentication failures: 5
- Single sign-on (SSO): Disable
Fast roaming settings:
- Enable pairwise master key (PMK) caching: Yes
- Maximum time a PMK is stored in cache: 720
- Maximum number of PMK's stored in cache: 10
:Extensible Authentication Protocol (EAP):
- EAP type: EAP-TLS
- Server Trust
- Certificate server names: redacted
- Root certificates for server validation: Win-CA-Root
- Client Authentication
- Authentication method: SCEP certificate
- Client certificate for client authentication (Identity certificate):
Win-CA-SCEP
- Company proxy settings: None
- Force Wi-Fi profile to be compliant with the Federal Information
Processing Standard (FIPS): No
```
**Configuration Logs**
```
FreeRADIUS Version 3.2.6
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/cache
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/totp
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/rfc7542
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/dhcp
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
proxy_dedup_window = 1
cleanup_delay = 5
max_requests = 16384
max_fds = 512
postauth_client_lost = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
require_message_authenticator = "auto"
limit_proxy_state = "auto"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
nonblock = no
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client AP-Meraki {
ipaddr = <<< secret >>>
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = eap
# Creating Auth-Type = digest
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file
/etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüà âæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÃ
ÔŒÙÛÜŸ"
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/mods-enabled/replicate
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loaded module rlm_cache
# Loading module "cache" from file /etc/freeradius/mods-enabled/cache
cache {
driver = "rlm_cache_rbtree"
key = "%{User-Name}"
ttl = 43200
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_detail
# Loading module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
max_eap_type = 52
ignore_unknown_eap_types = yes
cisco_accounting_username_bug = no
max_sessions = 16384
dedup_key = ""
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/freeradius/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_date
# Loading module "date" from file /etc/freeradius/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_totp
# Loading module "totp" from file /etc/freeradius/mods-enabled/totp
totp {
time_step = 30
otp_length = 6
lookback_steps = 1
lookback_interval = 30
lookforward_steps = 0
}
instantiate {
}
# Instantiating module "reject" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/mods-enabled/always
# Instantiating module "IPASS" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "bangpath" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
# Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
# Instantiating module "files" from file
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "cache" from file
/etc/freeradius/mods-enabled/cache
rlm_cache (cache): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded
and linked
# Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/server.key"
certificate_file = "/etc/ssl/certs/server.crt"
ca_file = "/etc/ssl/certs/secret-CA.cer"
private_key_password = <<< secret >>>
fragment_size = 2048
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.3"
tls_min_version = "1.2"
cache {
enable = yes
lifetime = 12
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
# Instantiating module "detail" from file
/etc/freeradius/mods-enabled/detail
# Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
# Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 38048
Listening on proxy address :: port 32969
Ready to process requests
```
**Windows Auth Logs**
```
Ready to process requests
(5) Received Access-Request Id 81 from secret:39522 to 10.0.0.4:1812 length
392
(5) User-Name = "host/1YHMMX3"
(5) NAS-IP-Address = secret
(5) NAS-Identifier = "E4-55-A8-06-9E-02:vap0"
(5) NAS-Port-Type = Wireless-802.11
(5) Service-Type = Framed-User
(5) NAS-Port = 2
(5) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(5) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 48 / Channel:
36"
(5) Acct-Session-Id = "9F136B00DBCD73D5"
(5) Acct-Multi-Session-Id = "D60E76FE14B8AD67"
(5) WLAN-Pairwise-Cipher = 1027076
(5) WLAN-Group-Cipher = 1027076
(5) WLAN-AKM-Suite = 1027073
(5) Meraki-Network-Name = "secret"
(5) Meraki-Ap-Name = "secret"
(5) Meraki-Ap-Tags = " secret SUPPORT "
(5) Called-Station-Id = "E4-55-A8-06-9E-02:secret"
(5) Meraki-Device-Name = "secret"
(5) Framed-MTU = 1400
(5) EAP-Message = 0x0242001101686f73742f3159484d4d5833
(5) Message-Authenticator = 0xf7614831e49cfa50761795b1572e7ec1
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 66 length 17
(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) authenticate {
(5) eap: Peer sent packet with method EAP Identity (1)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: (TLS) TLS -Initiating new session
(5) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(5) eap: Sending EAP Request (code 1) ID 67 length 10
(5) eap: EAP session adding &reply:State = 0xf15076f3f1137bed
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5) Framed-MTU = 1400
(5) Sent Access-Challenge Id 81 from 10.0.0.4:1812 to secret:39522 length 68
(5) EAP-Message = 0x0143000a0da000000000
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xf15076f3f1137bed70d174e475b9e983
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 82 from secret:39522 to 10.0.0.4:1812 length
656
(6) User-Name = "host/1YHMMX3"
(6) NAS-IP-Address = secret
(6) NAS-Identifier = "E4-55-A8-06-9E-02:vap0"
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) NAS-Port = 2
(6) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(6) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 49 / Channel:
36"
(6) Acct-Session-Id = "9F136B00DBCD73D5"
(6) Acct-Multi-Session-Id = "D60E76FE14B8AD67"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027073
(6) Meraki-Network-Name = "secret"
(6) Meraki-Ap-Name = "secret"
(6) Meraki-Ap-Tags = " secret SUPPORT "
(6) Called-Station-Id = "E4-55-A8-06-9E-02:secret"
(6) Meraki-Device-Name = "secret"
(6) Framed-MTU = 1400
(6) EAP-Message =
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
(6) State = 0xf15076f3f1137bed70d174e475b9e983
(6) Message-Authenticator = 0x7c64759901e6cda66eb6317232530306
(6) Restoring &session-state
(6) &session-state:Framed-MTU = 1400
(6) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 67 length 261
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6) [eap] = updated
(6) [files] = noop
(6) [expiration] = noop
(6) [logintime] = noop
(6) } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) authenticate {
(6) eap: Removing EAP session with state 0xf15076f3f1137bed
(6) eap: Previous EAP request found for state 0xf15076f3f1137bed, released
from the list
(6) eap: Peer sent packet with method EAP TLS (13)
(6) eap: Calling submodule eap_tls to process data
(6) eap_tls: (TLS) EAP Peer says that the final record size will be 251
bytes
(6) eap_tls: (TLS) EAP Got all data (251 bytes)
(6) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(6) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(6) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(6) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
hello
(6) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
hello
(6) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change
cipher spec
(6) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
(6) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write encrypted
extensions
(6) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(6) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate
(6) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
(6) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
certificate verify
(6) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
(6) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(6) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
(6) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early data
(6) eap_tls: (TLS) TLS - In Handshake Phase
(6) eap: Sending EAP Request (code 1) ID 68 length 1406
(6) eap: EAP session adding &reply:State = 0xf15076f3f0147bed
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6) Framed-MTU = 1400
(6) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(6) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(6) Sent Access-Challenge Id 82 from 10.0.0.4:1812 to secret:39522 length
1474
(6) EAP-Message =
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
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xf15076f3f0147bed70d174e475b9e983
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 83 from secret:39522 to 10.0.0.4:1812 length
399
(7) User-Name = "host/1YHMMX3"
(7) NAS-IP-Address = secret
(7) NAS-Identifier = "E4-55-A8-06-9E-02:vap0"
(7) NAS-Port-Type = Wireless-802.11
(7) Service-Type = Framed-User
(7) NAS-Port = 2
(7) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(7) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 49 / Channel:
36"
(7) Acct-Session-Id = "9F136B00DBCD73D5"
(7) Acct-Multi-Session-Id = "D60E76FE14B8AD67"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027073
(7) Meraki-Network-Name = "secret"
(7) Meraki-Ap-Name = "secret"
(7) Meraki-Ap-Tags = " secret SUPPORT "
(7) Called-Station-Id = "E4-55-A8-06-9E-02:secret"
(7) Meraki-Device-Name = "secret"
(7) Framed-MTU = 1400
(7) EAP-Message = 0x024400060d00
(7) State = 0xf15076f3f0147bed70d174e475b9e983
(7) Message-Authenticator = 0x9c31594e9379170b04727aa6fdd10316
(7) Restoring &session-state
(7) &session-state:Framed-MTU = 1400
(7) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(7) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(7) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 68 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
(7) [expiration] = noop
(7) [logintime] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) authenticate {
(7) eap: Removing EAP session with state 0xf15076f3f0147bed
(7) eap: Previous EAP request found for state 0xf15076f3f0147bed, released
from the list
(7) eap: Peer sent packet with method EAP TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: (TLS) Peer ACKed our handshake fragment
(7) eap: Sending EAP Request (code 1) ID 69 length 1406
(7) eap: EAP session adding &reply:State = 0xf15076f3f3157bed
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7) Framed-MTU = 1400
(7) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(7) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(7) Sent Access-Challenge Id 83 from 10.0.0.4:1812 to secret:39522 length
1474
(7) EAP-Message =
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
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xf15076f3f3157bed70d174e475b9e983
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 84 from secret:39522 to 10.0.0.4:1812 length
399
(8) User-Name = "host/1YHMMX3"
(8) NAS-IP-Address = secret
(8) NAS-Identifier = "E4-55-A8-06-9E-02:vap0"
(8) NAS-Port-Type = Wireless-802.11
(8) Service-Type = Framed-User
(8) NAS-Port = 2
(8) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(8) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 48 / Channel:
36"
(8) Acct-Session-Id = "9F136B00DBCD73D5"
(8) Acct-Multi-Session-Id = "D60E76FE14B8AD67"
(8) WLAN-Pairwise-Cipher = 1027076
(8) WLAN-Group-Cipher = 1027076
(8) WLAN-AKM-Suite = 1027073
(8) Meraki-Network-Name = "secret"
(8) Meraki-Ap-Name = "secret"
(8) Meraki-Ap-Tags = " secret SUPPORT "
(8) Called-Station-Id = "E4-55-A8-06-9E-02:secret"
(8) Meraki-Device-Name = "secret"
(8) Framed-MTU = 1400
(8) EAP-Message = 0x024500060d00
(8) State = 0xf15076f3f3157bed70d174e475b9e983
(8) Message-Authenticator = 0x70c95f4ea819fc276c6a8401b00e981f
(8) Restoring &session-state
(8) &session-state:Framed-MTU = 1400
(8) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(8) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(8) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 69 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [files] = noop
(8) [expiration] = noop
(8) [logintime] = noop
(8) } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) authenticate {
(8) eap: Removing EAP session with state 0xf15076f3f3157bed
(8) eap: Previous EAP request found for state 0xf15076f3f3157bed, released
from the list
(8) eap: Peer sent packet with method EAP TLS (13)
(8) eap: Calling submodule eap_tls to process data
(8) eap_tls: (TLS) Peer ACKed our handshake fragment
(8) eap: Sending EAP Request (code 1) ID 70 length 288
(8) eap: EAP session adding &reply:State = 0xf15076f3f2167bed
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/freeradius/sites-enabled/default
(8) Challenge { ... } # empty sub-section is ignored
(8) session-state: Saving cached attributes
(8) Framed-MTU = 1400
(8) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(8) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(8) Sent Access-Challenge Id 84 from 10.0.0.4:1812 to secret:39522 length
348
(8) EAP-Message =
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
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0xf15076f3f2167bed70d174e475b9e983
(8) Finished request
Waking up in 4.8 seconds.
(5) Cleaning up request packet ID 81 with timestamp +199 due to
cleanup_delay was reached
(6) Cleaning up request packet ID 82 with timestamp +199 due to
cleanup_delay was reached
(7) Cleaning up request packet ID 83 with timestamp +199 due to
cleanup_delay was reached
(8) Cleaning up request packet ID 84 with timestamp +199 due to
cleanup_delay was reached
Ready to process requests
(9) Received Access-Request Id 94 from secret:33786 to 10.0.0.4:1812 length
385
(9) User-Name = "host/1YHMMX3"
(9) NAS-IP-Address = secret
(9) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(9) NAS-Port-Type = Wireless-802.11
(9) Service-Type = Framed-User
(9) NAS-Port = 1
(9) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(9) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 22 / Channel:
100"
(9) Acct-Session-Id = "1A69A45514A77457"
(9) Acct-Multi-Session-Id = "61CCB23C843CED83"
(9) WLAN-Pairwise-Cipher = 1027076
(9) WLAN-Group-Cipher = 1027076
(9) WLAN-AKM-Suite = 1027073
(9) Meraki-Network-Name = "secret"
(9) Meraki-Ap-Name = "secret"
(9) Meraki-Ap-Tags = " secret "
(9) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(9) Meraki-Device-Name = "secret"
(9) Framed-MTU = 1400
(9) EAP-Message = 0x021c001101686f73742f3159484d4d5833
(9) Message-Authenticator = 0xdc880e599cad11ed979a513f8986f1c2
(9) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 28 length 17
(9) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9) authenticate {
(9) eap: Peer sent packet with method EAP Identity (1)
(9) eap: Calling submodule eap_tls to process data
(9) eap_tls: (TLS) TLS -Initiating new session
(9) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(9) eap: Sending EAP Request (code 1) ID 29 length 10
(9) eap: EAP session adding &reply:State = 0x4373e489436ee94b
(9) [eap] = handled
(9) } # authenticate = handled
(9) Using Post-Auth-Type Challenge
(9) # Executing group from file /etc/freeradius/sites-enabled/default
(9) Challenge { ... } # empty sub-section is ignored
(9) session-state: Saving cached attributes
(9) Framed-MTU = 1400
(9) Sent Access-Challenge Id 94 from 10.0.0.4:1812 to secret:33786 length 68
(9) EAP-Message = 0x011d000a0da000000000
(9) Message-Authenticator = 0x00000000000000000000000000000000
(9) State = 0x4373e489436ee94be2b5e695e75f3b35
(9) Finished request
Waking up in 4.9 seconds.
(10) Received Access-Request Id 95 from secret:33786 to 10.0.0.4:1812
length 649
(10) User-Name = "host/1YHMMX3"
(10) NAS-IP-Address = secret
(10) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(10) NAS-Port-Type = Wireless-802.11
(10) Service-Type = Framed-User
(10) NAS-Port = 1
(10) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(10) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 23 / Channel:
100"
(10) Acct-Session-Id = "1A69A45514A77457"
(10) Acct-Multi-Session-Id = "61CCB23C843CED83"
(10) WLAN-Pairwise-Cipher = 1027076
(10) WLAN-Group-Cipher = 1027076
(10) WLAN-AKM-Suite = 1027073
(10) Meraki-Network-Name = "secret"
(10) Meraki-Ap-Name = "secret"
(10) Meraki-Ap-Tags = " secret "
(10) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(10) Meraki-Device-Name = "secret"
(10) Framed-MTU = 1400
(10) EAP-Message =
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
(10) State = 0x4373e489436ee94be2b5e695e75f3b35
(10) Message-Authenticator = 0xc209cdd2dbd227feeb2c70401b601563
(10) Restoring &session-state
(10) &session-state:Framed-MTU = 1400
(10) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(10) authorize {
(10) policy filter_username {
(10) if (&User-Name) {
(10) if (&User-Name) -> TRUE
(10) if (&User-Name) {
(10) if (&User-Name =~ / /) {
(10) if (&User-Name =~ / /) -> FALSE
(10) if (&User-Name =~ /@[^@]*@/ ) {
(10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(10) if (&User-Name =~ /\.\./ ) {
(10) if (&User-Name =~ /\.\./ ) -> FALSE
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(10) if (&User-Name =~ /\.$/) {
(10) if (&User-Name =~ /\.$/) -> FALSE
(10) if (&User-Name =~ /@\./) {
(10) if (&User-Name =~ /@\./) -> FALSE
(10) } # if (&User-Name) = notfound
(10) } # policy filter_username = notfound
(10) [preprocess] = ok
(10) [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 29 length 261
(10) eap: No EAP Start, assuming it's an on-going EAP conversation
(10) [eap] = updated
(10) [files] = noop
(10) [expiration] = noop
(10) [logintime] = noop
(10) } # authorize = updated
(10) Found Auth-Type = eap
(10) # Executing group from file /etc/freeradius/sites-enabled/default
(10) authenticate {
(10) eap: Removing EAP session with state 0x4373e489436ee94b
(10) eap: Previous EAP request found for state 0x4373e489436ee94b, released
from the list
(10) eap: Peer sent packet with method EAP TLS (13)
(10) eap: Calling submodule eap_tls to process data
(10) eap_tls: (TLS) EAP Peer says that the final record size will be 251
bytes
(10) eap_tls: (TLS) EAP Got all data (251 bytes)
(10) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(10) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(10) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(10) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
hello
(10) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
(10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
hello
(10) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
(10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change
cipher spec
(10) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
(10) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write encrypted
extensions
(10) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
(10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(10) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
(10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate
(10) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
(10) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
certificate verify
(10) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
(10) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(10) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
(10) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early
data
(10) eap_tls: (TLS) TLS - In Handshake Phase
(10) eap: Sending EAP Request (code 1) ID 30 length 1406
(10) eap: EAP session adding &reply:State = 0x4373e489426de94b
(10) [eap] = handled
(10) } # authenticate = handled
(10) Using Post-Auth-Type Challenge
(10) # Executing group from file /etc/freeradius/sites-enabled/default
(10) Challenge { ... } # empty sub-section is ignored
(10) session-state: Saving cached attributes
(10) Framed-MTU = 1400
(10) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(10) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(10) Sent Access-Challenge Id 95 from 10.0.0.4:1812 to secret:33786 length
1474
(10) EAP-Message =
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
(10) Message-Authenticator = 0x00000000000000000000000000000000
(10) State = 0x4373e489426de94be2b5e695e75f3b35
(10) Finished request
Waking up in 4.9 seconds.
(11) Received Access-Request Id 96 from secret:33786 to 10.0.0.4:1812
length 392
(11) User-Name = "host/1YHMMX3"
(11) NAS-IP-Address = secret
(11) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(11) NAS-Port-Type = Wireless-802.11
(11) Service-Type = Framed-User
(11) NAS-Port = 1
(11) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(11) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 24 / Channel:
100"
(11) Acct-Session-Id = "1A69A45514A77457"
(11) Acct-Multi-Session-Id = "61CCB23C843CED83"
(11) WLAN-Pairwise-Cipher = 1027076
(11) WLAN-Group-Cipher = 1027076
(11) WLAN-AKM-Suite = 1027073
(11) Meraki-Network-Name = "secret"
(11) Meraki-Ap-Name = "secret"
(11) Meraki-Ap-Tags = " secret "
(11) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(11) Meraki-Device-Name = "secret"
(11) Framed-MTU = 1400
(11) EAP-Message = 0x021e00060d00
(11) State = 0x4373e489426de94be2b5e695e75f3b35
(11) Message-Authenticator = 0x3761ac51d550505bc655263cacfedd2a
(11) Restoring &session-state
(11) &session-state:Framed-MTU = 1400
(11) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(11) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(11) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(11) authorize {
(11) policy filter_username {
(11) if (&User-Name) {
(11) if (&User-Name) -> TRUE
(11) if (&User-Name) {
(11) if (&User-Name =~ / /) {
(11) if (&User-Name =~ / /) -> FALSE
(11) if (&User-Name =~ /@[^@]*@/ ) {
(11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(11) if (&User-Name =~ /\.\./ ) {
(11) if (&User-Name =~ /\.\./ ) -> FALSE
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(11) if (&User-Name =~ /\.$/) {
(11) if (&User-Name =~ /\.$/) -> FALSE
(11) if (&User-Name =~ /@\./) {
(11) if (&User-Name =~ /@\./) -> FALSE
(11) } # if (&User-Name) = notfound
(11) } # policy filter_username = notfound
(11) [preprocess] = ok
(11) [digest] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(11) suffix: No such realm "NULL"
(11) [suffix] = noop
(11) eap: Peer sent EAP Response (code 2) ID 30 length 6
(11) eap: No EAP Start, assuming it's an on-going EAP conversation
(11) [eap] = updated
(11) [files] = noop
(11) [expiration] = noop
(11) [logintime] = noop
(11) } # authorize = updated
(11) Found Auth-Type = eap
(11) # Executing group from file /etc/freeradius/sites-enabled/default
(11) authenticate {
(11) eap: Removing EAP session with state 0x4373e489426de94b
(11) eap: Previous EAP request found for state 0x4373e489426de94b, released
from the list
(11) eap: Peer sent packet with method EAP TLS (13)
(11) eap: Calling submodule eap_tls to process data
(11) eap_tls: (TLS) Peer ACKed our handshake fragment
(11) eap: Sending EAP Request (code 1) ID 31 length 1406
(11) eap: EAP session adding &reply:State = 0x4373e489416ce94b
(11) [eap] = handled
(11) } # authenticate = handled
(11) Using Post-Auth-Type Challenge
(11) # Executing group from file /etc/freeradius/sites-enabled/default
(11) Challenge { ... } # empty sub-section is ignored
(11) session-state: Saving cached attributes
(11) Framed-MTU = 1400
(11) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(11) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(11) Sent Access-Challenge Id 96 from 10.0.0.4:1812 to secret:33786 length
1474
(11) EAP-Message =
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
(11) Message-Authenticator = 0x00000000000000000000000000000000
(11) State = 0x4373e489416ce94be2b5e695e75f3b35
(11) Finished request
Waking up in 4.9 seconds.
(12) Received Access-Request Id 97 from secret:33786 to 10.0.0.4:1812
length 392
(12) User-Name = "host/1YHMMX3"
(12) NAS-IP-Address = secret
(12) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(12) NAS-Port-Type = Wireless-802.11
(12) Service-Type = Framed-User
(12) NAS-Port = 1
(12) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(12) Connect-Info = "CONNECT 54.00 Mbps / 802.11ac / RSSI: 24 / Channel:
100"
(12) Acct-Session-Id = "1A69A45514A77457"
(12) Acct-Multi-Session-Id = "61CCB23C843CED83"
(12) WLAN-Pairwise-Cipher = 1027076
(12) WLAN-Group-Cipher = 1027076
(12) WLAN-AKM-Suite = 1027073
(12) Meraki-Network-Name = "secret"
(12) Meraki-Ap-Name = "secret"
(12) Meraki-Ap-Tags = " secret "
(12) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(12) Meraki-Device-Name = "secret"
(12) Framed-MTU = 1400
(12) EAP-Message = 0x021f00060d00
(12) State = 0x4373e489416ce94be2b5e695e75f3b35
(12) Message-Authenticator = 0x14ee3a9fc1fb03b78bdc1761dce16e55
(12) Restoring &session-state
(12) &session-state:Framed-MTU = 1400
(12) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(12) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(12) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(12) authorize {
(12) policy filter_username {
(12) if (&User-Name) {
(12) if (&User-Name) -> TRUE
(12) if (&User-Name) {
(12) if (&User-Name =~ / /) {
(12) if (&User-Name =~ / /) -> FALSE
(12) if (&User-Name =~ /@[^@]*@/ ) {
(12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(12) if (&User-Name =~ /\.\./ ) {
(12) if (&User-Name =~ /\.\./ ) -> FALSE
(12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(12) if (&User-Name =~ /\.$/) {
(12) if (&User-Name =~ /\.$/) -> FALSE
(12) if (&User-Name =~ /@\./) {
(12) if (&User-Name =~ /@\./) -> FALSE
(12) } # if (&User-Name) = notfound
(12) } # policy filter_username = notfound
(12) [preprocess] = ok
(12) [digest] = noop
(12) suffix: Checking for suffix after "@"
(12) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(12) suffix: No such realm "NULL"
(12) [suffix] = noop
(12) eap: Peer sent EAP Response (code 2) ID 31 length 6
(12) eap: No EAP Start, assuming it's an on-going EAP conversation
(12) [eap] = updated
(12) [files] = noop
(12) [expiration] = noop
(12) [logintime] = noop
(12) } # authorize = updated
(12) Found Auth-Type = eap
(12) # Executing group from file /etc/freeradius/sites-enabled/default
(12) authenticate {
(12) eap: Removing EAP session with state 0x4373e489416ce94b
(12) eap: Previous EAP request found for state 0x4373e489416ce94b, released
from the list
(12) eap: Peer sent packet with method EAP TLS (13)
(12) eap: Calling submodule eap_tls to process data
(12) eap_tls: (TLS) Peer ACKed our handshake fragment
(12) eap: Sending EAP Request (code 1) ID 32 length 288
(12) eap: EAP session adding &reply:State = 0x4373e4894053e94b
(12) [eap] = handled
(12) } # authenticate = handled
(12) Using Post-Auth-Type Challenge
(12) # Executing group from file /etc/freeradius/sites-enabled/default
(12) Challenge { ... } # empty sub-section is ignored
(12) session-state: Saving cached attributes
(12) Framed-MTU = 1400
(12) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(12) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(12) Sent Access-Challenge Id 97 from 10.0.0.4:1812 to secret:33786 length
348
(12) EAP-Message =
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
(12) Message-Authenticator = 0x00000000000000000000000000000000
(12) State = 0x4373e4894053e94be2b5e695e75f3b35
(12) Finished request
Waking up in 4.8 seconds.
(9) Cleaning up request packet ID 94 with timestamp +218 due to
cleanup_delay was reached
(10) Cleaning up request packet ID 95 with timestamp +218 due to
cleanup_delay was reached
(11) Cleaning up request packet ID 96 with timestamp +218 due to
cleanup_delay was reached
(12) Cleaning up request packet ID 97 with timestamp +218 due to
cleanup_delay was reached
Ready to process requests
(13) Received Access-Request Id 17 from secret:44534 to 10.0.0.4:1812
length 383
(13) User-Name = "host/1YHMMX3"
(13) NAS-IP-Address = secret
(13) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(13) NAS-Port-Type = Wireless-802.11
(13) Service-Type = Framed-User
(13) NAS-Port = 1
(13) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(13) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 37 / Channel:
11"
(13) Acct-Session-Id = "82C6E9505A1A170B"
(13) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(13) WLAN-Pairwise-Cipher = 1027076
(13) WLAN-Group-Cipher = 1027076
(13) WLAN-AKM-Suite = 1027073
(13) Meraki-Network-Name = "secret"
(13) Meraki-Ap-Name = "secret"
(13) Meraki-Ap-Tags = " secret "
(13) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(13) Meraki-Device-Name = "secret"
(13) Framed-MTU = 1400
(13) EAP-Message = 0x028a001101686f73742f3159484d4d5833
(13) Message-Authenticator = 0x115783637754e3fe42b8eb7746ee4c1a
(13) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(13) authorize {
(13) policy filter_username {
(13) if (&User-Name) {
(13) if (&User-Name) -> TRUE
(13) if (&User-Name) {
(13) if (&User-Name =~ / /) {
(13) if (&User-Name =~ / /) -> FALSE
(13) if (&User-Name =~ /@[^@]*@/ ) {
(13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(13) if (&User-Name =~ /\.\./ ) {
(13) if (&User-Name =~ /\.\./ ) -> FALSE
(13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(13) if (&User-Name =~ /\.$/) {
(13) if (&User-Name =~ /\.$/) -> FALSE
(13) if (&User-Name =~ /@\./) {
(13) if (&User-Name =~ /@\./) -> FALSE
(13) } # if (&User-Name) = notfound
(13) } # policy filter_username = notfound
(13) [preprocess] = ok
(13) [digest] = noop
(13) suffix: Checking for suffix after "@"
(13) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(13) suffix: No such realm "NULL"
(13) [suffix] = noop
(13) eap: Peer sent EAP Response (code 2) ID 138 length 17
(13) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(13) [eap] = ok
(13) } # authorize = ok
(13) Found Auth-Type = eap
(13) # Executing group from file /etc/freeradius/sites-enabled/default
(13) authenticate {
(13) eap: Peer sent packet with method EAP Identity (1)
(13) eap: Calling submodule eap_tls to process data
(13) eap_tls: (TLS) TLS -Initiating new session
(13) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(13) eap: Sending EAP Request (code 1) ID 139 length 10
(13) eap: EAP session adding &reply:State = 0x17bfec171734e18d
(13) [eap] = handled
(13) } # authenticate = handled
(13) Using Post-Auth-Type Challenge
(13) # Executing group from file /etc/freeradius/sites-enabled/default
(13) Challenge { ... } # empty sub-section is ignored
(13) session-state: Saving cached attributes
(13) Framed-MTU = 1400
(13) Sent Access-Challenge Id 17 from 10.0.0.4:1812 to secret:44534 length
68
(13) EAP-Message = 0x018b000a0da000000000
(13) Message-Authenticator = 0x00000000000000000000000000000000
(13) State = 0x17bfec171734e18dea1aee57ef94a17d
(13) Finished request
Waking up in 4.9 seconds.
(14) Received Access-Request Id 18 from secret:44534 to 10.0.0.4:1812
length 647
(14) User-Name = "host/1YHMMX3"
(14) NAS-IP-Address = secret
(14) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(14) NAS-Port-Type = Wireless-802.11
(14) Service-Type = Framed-User
(14) NAS-Port = 1
(14) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(14) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 36 / Channel:
11"
(14) Acct-Session-Id = "82C6E9505A1A170B"
(14) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(14) WLAN-Pairwise-Cipher = 1027076
(14) WLAN-Group-Cipher = 1027076
(14) WLAN-AKM-Suite = 1027073
(14) Meraki-Network-Name = "secret"
(14) Meraki-Ap-Name = "secret"
(14) Meraki-Ap-Tags = " secret "
(14) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(14) Meraki-Device-Name = "secret"
(14) Framed-MTU = 1400
(14) EAP-Message =
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
(14) State = 0x17bfec171734e18dea1aee57ef94a17d
(14) Message-Authenticator = 0xe2fc58955492040f14032f3764191d2b
(14) Restoring &session-state
(14) &session-state:Framed-MTU = 1400
(14) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(14) authorize {
(14) policy filter_username {
(14) if (&User-Name) {
(14) if (&User-Name) -> TRUE
(14) if (&User-Name) {
(14) if (&User-Name =~ / /) {
(14) if (&User-Name =~ / /) -> FALSE
(14) if (&User-Name =~ /@[^@]*@/ ) {
(14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(14) if (&User-Name =~ /\.\./ ) {
(14) if (&User-Name =~ /\.\./ ) -> FALSE
(14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(14) if (&User-Name =~ /\.$/) {
(14) if (&User-Name =~ /\.$/) -> FALSE
(14) if (&User-Name =~ /@\./) {
(14) if (&User-Name =~ /@\./) -> FALSE
(14) } # if (&User-Name) = notfound
(14) } # policy filter_username = notfound
(14) [preprocess] = ok
(14) [digest] = noop
(14) suffix: Checking for suffix after "@"
(14) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(14) suffix: No such realm "NULL"
(14) [suffix] = noop
(14) eap: Peer sent EAP Response (code 2) ID 139 length 261
(14) eap: No EAP Start, assuming it's an on-going EAP conversation
(14) [eap] = updated
(14) [files] = noop
(14) [expiration] = noop
(14) [logintime] = noop
(14) } # authorize = updated
(14) Found Auth-Type = eap
(14) # Executing group from file /etc/freeradius/sites-enabled/default
(14) authenticate {
(14) eap: Removing EAP session with state 0x17bfec171734e18d
(14) eap: Previous EAP request found for state 0x17bfec171734e18d, released
from the list
(14) eap: Peer sent packet with method EAP TLS (13)
(14) eap: Calling submodule eap_tls to process data
(14) eap_tls: (TLS) EAP Peer says that the final record size will be 251
bytes
(14) eap_tls: (TLS) EAP Got all data (251 bytes)
(14) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(14) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(14) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(14) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(14) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
hello
(14) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
(14) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server
hello
(14) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
(14) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write change
cipher spec
(14) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
(14) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write encrypted
extensions
(14) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
(14) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate request
(14) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
(14) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
certificate
(14) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
(14) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
certificate verify
(14) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
(14) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
(14) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
(14) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early
data
(14) eap_tls: (TLS) TLS - In Handshake Phase
(14) eap: Sending EAP Request (code 1) ID 140 length 1406
(14) eap: EAP session adding &reply:State = 0x17bfec171633e18d
(14) [eap] = handled
(14) } # authenticate = handled
(14) Using Post-Auth-Type Challenge
(14) # Executing group from file /etc/freeradius/sites-enabled/default
(14) Challenge { ... } # empty sub-section is ignored
(14) session-state: Saving cached attributes
(14) Framed-MTU = 1400
(14) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(14) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(14) Sent Access-Challenge Id 18 from 10.0.0.4:1812 to secret:44534 length
1474
(14) EAP-Message =
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
(14) Message-Authenticator = 0x00000000000000000000000000000000
(14) State = 0x17bfec171633e18dea1aee57ef94a17d
(14) Finished request
Waking up in 4.9 seconds.
(15) Received Access-Request Id 19 from secret:44534 to 10.0.0.4:1812
length 390
(15) User-Name = "host/1YHMMX3"
(15) NAS-IP-Address = secret
(15) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(15) NAS-Port-Type = Wireless-802.11
(15) Service-Type = Framed-User
(15) NAS-Port = 1
(15) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(15) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 37 / Channel:
11"
(15) Acct-Session-Id = "82C6E9505A1A170B"
(15) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(15) WLAN-Pairwise-Cipher = 1027076
(15) WLAN-Group-Cipher = 1027076
(15) WLAN-AKM-Suite = 1027073
(15) Meraki-Network-Name = "secret"
(15) Meraki-Ap-Name = "secret"
(15) Meraki-Ap-Tags = " secret "
(15) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(15) Meraki-Device-Name = "secret"
(15) Framed-MTU = 1400
(15) EAP-Message = 0x028c00060d00
(15) State = 0x17bfec171633e18dea1aee57ef94a17d
(15) Message-Authenticator = 0x65821874a57e7d1d91f2367acf7be7fe
(15) Restoring &session-state
(15) &session-state:Framed-MTU = 1400
(15) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(15) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(15) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(15) authorize {
(15) policy filter_username {
(15) if (&User-Name) {
(15) if (&User-Name) -> TRUE
(15) if (&User-Name) {
(15) if (&User-Name =~ / /) {
(15) if (&User-Name =~ / /) -> FALSE
(15) if (&User-Name =~ /@[^@]*@/ ) {
(15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(15) if (&User-Name =~ /\.\./ ) {
(15) if (&User-Name =~ /\.\./ ) -> FALSE
(15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(15) if (&User-Name =~ /\.$/) {
(15) if (&User-Name =~ /\.$/) -> FALSE
(15) if (&User-Name =~ /@\./) {
(15) if (&User-Name =~ /@\./) -> FALSE
(15) } # if (&User-Name) = notfound
(15) } # policy filter_username = notfound
(15) [preprocess] = ok
(15) [digest] = noop
(15) suffix: Checking for suffix after "@"
(15) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(15) suffix: No such realm "NULL"
(15) [suffix] = noop
(15) eap: Peer sent EAP Response (code 2) ID 140 length 6
(15) eap: No EAP Start, assuming it's an on-going EAP conversation
(15) [eap] = updated
(15) [files] = noop
(15) [expiration] = noop
(15) [logintime] = noop
(15) } # authorize = updated
(15) Found Auth-Type = eap
(15) # Executing group from file /etc/freeradius/sites-enabled/default
(15) authenticate {
(15) eap: Removing EAP session with state 0x17bfec171633e18d
(15) eap: Previous EAP request found for state 0x17bfec171633e18d, released
from the list
(15) eap: Peer sent packet with method EAP TLS (13)
(15) eap: Calling submodule eap_tls to process data
(15) eap_tls: (TLS) Peer ACKed our handshake fragment
(15) eap: Sending EAP Request (code 1) ID 141 length 1406
(15) eap: EAP session adding &reply:State = 0x17bfec171532e18d
(15) [eap] = handled
(15) } # authenticate = handled
(15) Using Post-Auth-Type Challenge
(15) # Executing group from file /etc/freeradius/sites-enabled/default
(15) Challenge { ... } # empty sub-section is ignored
(15) session-state: Saving cached attributes
(15) Framed-MTU = 1400
(15) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(15) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(15) Sent Access-Challenge Id 19 from 10.0.0.4:1812 to secret:44534 length
1474
(15) EAP-Message =
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
(15) Message-Authenticator = 0x00000000000000000000000000000000
(15) State = 0x17bfec171532e18dea1aee57ef94a17d
(15) Finished request
Waking up in 4.8 seconds.
(16) Received Access-Request Id 20 from secret:44534 to 10.0.0.4:1812
length 390
(16) User-Name = "host/1YHMMX3"
(16) NAS-IP-Address = secret
(16) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(16) NAS-Port-Type = Wireless-802.11
(16) Service-Type = Framed-User
(16) NAS-Port = 1
(16) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(16) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 37 / Channel:
11"
(16) Acct-Session-Id = "82C6E9505A1A170B"
(16) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(16) WLAN-Pairwise-Cipher = 1027076
(16) WLAN-Group-Cipher = 1027076
(16) WLAN-AKM-Suite = 1027073
(16) Meraki-Network-Name = "secret"
(16) Meraki-Ap-Name = "secret"
(16) Meraki-Ap-Tags = " secret "
(16) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(16) Meraki-Device-Name = "secret"
(16) Framed-MTU = 1400
(16) EAP-Message = 0x028d00060d00
(16) State = 0x17bfec171532e18dea1aee57ef94a17d
(16) Message-Authenticator = 0xbd606e4e5a0d517841c9ca79d2f8cda1
(16) Restoring &session-state
(16) &session-state:Framed-MTU = 1400
(16) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(16) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(16) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(16) authorize {
(16) policy filter_username {
(16) if (&User-Name) {
(16) if (&User-Name) -> TRUE
(16) if (&User-Name) {
(16) if (&User-Name =~ / /) {
(16) if (&User-Name =~ / /) -> FALSE
(16) if (&User-Name =~ /@[^@]*@/ ) {
(16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(16) if (&User-Name =~ /\.\./ ) {
(16) if (&User-Name =~ /\.\./ ) -> FALSE
(16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(16) if (&User-Name =~ /\.$/) {
(16) if (&User-Name =~ /\.$/) -> FALSE
(16) if (&User-Name =~ /@\./) {
(16) if (&User-Name =~ /@\./) -> FALSE
(16) } # if (&User-Name) = notfound
(16) } # policy filter_username = notfound
(16) [preprocess] = ok
(16) [digest] = noop
(16) suffix: Checking for suffix after "@"
(16) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(16) suffix: No such realm "NULL"
(16) [suffix] = noop
(16) eap: Peer sent EAP Response (code 2) ID 141 length 6
(16) eap: No EAP Start, assuming it's an on-going EAP conversation
(16) [eap] = updated
(16) [files] = noop
(16) [expiration] = noop
(16) [logintime] = noop
(16) } # authorize = updated
(16) Found Auth-Type = eap
(16) # Executing group from file /etc/freeradius/sites-enabled/default
(16) authenticate {
(16) eap: Removing EAP session with state 0x17bfec171532e18d
(16) eap: Previous EAP request found for state 0x17bfec171532e18d, released
from the list
(16) eap: Peer sent packet with method EAP TLS (13)
(16) eap: Calling submodule eap_tls to process data
(16) eap_tls: (TLS) Peer ACKed our handshake fragment
(16) eap: Sending EAP Request (code 1) ID 142 length 288
(16) eap: EAP session adding &reply:State = 0x17bfec171431e18d
(16) [eap] = handled
(16) } # authenticate = handled
(16) Using Post-Auth-Type Challenge
(16) # Executing group from file /etc/freeradius/sites-enabled/default
(16) Challenge { ... } # empty sub-section is ignored
(16) session-state: Saving cached attributes
(16) Framed-MTU = 1400
(16) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(16) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(16) Sent Access-Challenge Id 20 from 10.0.0.4:1812 to secret:44534 length
348
(16) EAP-Message =
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
(16) Message-Authenticator = 0x00000000000000000000000000000000
(16) State = 0x17bfec171431e18dea1aee57ef94a17d
(16) Finished request
Waking up in 4.8 seconds.
(17) Received Access-Request Id 21 from secret:44534 to 10.0.0.4:1812
length 1886
(17) User-Name = "host/1YHMMX3"
(17) NAS-IP-Address = secret
(17) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(17) NAS-Port-Type = Wireless-802.11
(17) Service-Type = Framed-User
(17) NAS-Port = 1
(17) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(17) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 34 / Channel:
11"
(17) Acct-Session-Id = "82C6E9505A1A170B"
(17) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(17) WLAN-Pairwise-Cipher = 1027076
(17) WLAN-Group-Cipher = 1027076
(17) WLAN-AKM-Suite = 1027073
(17) Meraki-Network-Name = "secret"
(17) Meraki-Ap-Name = "secret"
(17) Meraki-Ap-Tags = " secret "
(17) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(17) Meraki-Device-Name = "secret"
(17) Framed-MTU = 1400
(17) EAP-Message =
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
(17) State = 0x17bfec171431e18dea1aee57ef94a17d
(17) Message-Authenticator = 0x1f4049f7535751ad10164aa536dee632
(17) Restoring &session-state
(17) &session-state:Framed-MTU = 1400
(17) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(17) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(17) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(17) authorize {
(17) policy filter_username {
(17) if (&User-Name) {
(17) if (&User-Name) -> TRUE
(17) if (&User-Name) {
(17) if (&User-Name =~ / /) {
(17) if (&User-Name =~ / /) -> FALSE
(17) if (&User-Name =~ /@[^@]*@/ ) {
(17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(17) if (&User-Name =~ /\.\./ ) {
(17) if (&User-Name =~ /\.\./ ) -> FALSE
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(17) if (&User-Name =~ /\.$/) {
(17) if (&User-Name =~ /\.$/) -> FALSE
(17) if (&User-Name =~ /@\./) {
(17) if (&User-Name =~ /@\./) -> FALSE
(17) } # if (&User-Name) = notfound
(17) } # policy filter_username = notfound
(17) [preprocess] = ok
(17) [digest] = noop
(17) suffix: Checking for suffix after "@"
(17) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(17) suffix: No such realm "NULL"
(17) [suffix] = noop
(17) eap: Peer sent EAP Response (code 2) ID 142 length 1492
(17) eap: No EAP Start, assuming it's an on-going EAP conversation
(17) [eap] = updated
(17) [files] = noop
(17) [expiration] = noop
(17) [logintime] = noop
(17) } # authorize = updated
(17) Found Auth-Type = eap
(17) # Executing group from file /etc/freeradius/sites-enabled/default
(17) authenticate {
(17) eap: Removing EAP session with state 0x17bfec171431e18d
(17) eap: Previous EAP request found for state 0x17bfec171431e18d, released
from the list
(17) eap: Peer sent packet with method EAP TLS (13)
(17) eap: Calling submodule eap_tls to process data
(17) eap_tls: (TLS) EAP Peer says that the final record size will be 1854
bytes
(17) eap_tls: (TLS) EAP Expecting 2 fragments
(17) eap_tls: (TLS) EAP Got first TLS fragment (1482 bytes). Peer says
more fragments will follow
(17) eap_tls: (TLS) EAP ACKing fragment, the peer should send more data.
(17) eap: Sending EAP Request (code 1) ID 143 length 6
(17) eap: EAP session adding &reply:State = 0x17bfec171330e18d
(17) [eap] = handled
(17) } # authenticate = handled
(17) Using Post-Auth-Type Challenge
(17) # Executing group from file /etc/freeradius/sites-enabled/default
(17) Challenge { ... } # empty sub-section is ignored
(17) session-state: Saving cached attributes
(17) Framed-MTU = 1400
(17) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(17) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(17) Sent Access-Challenge Id 21 from 10.0.0.4:1812 to secret:44534 length
64
(17) EAP-Message = 0x018f00060d00
(17) Message-Authenticator = 0x00000000000000000000000000000000
(17) State = 0x17bfec171330e18dea1aee57ef94a17d
(17) Finished request
Waking up in 4.4 seconds.
(18) Received Access-Request Id 22 from secret:44534 to 10.0.0.4:1812
length 764
(18) User-Name = "host/1YHMMX3"
(18) NAS-IP-Address = secret
(18) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(18) NAS-Port-Type = Wireless-802.11
(18) Service-Type = Framed-User
(18) NAS-Port = 1
(18) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(18) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 35 / Channel:
11"
(18) Acct-Session-Id = "82C6E9505A1A170B"
(18) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(18) WLAN-Pairwise-Cipher = 1027076
(18) WLAN-Group-Cipher = 1027076
(18) WLAN-AKM-Suite = 1027073
(18) Meraki-Network-Name = "secret"
(18) Meraki-Ap-Name = "secret"
(18) Meraki-Ap-Tags = " secret "
(18) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(18) Meraki-Device-Name = "secret"
(18) Framed-MTU = 1400
(18) EAP-Message =
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
(18) State = 0x17bfec171330e18dea1aee57ef94a17d
(18) Message-Authenticator = 0xcc869f9aa52e4b050fced77bb8e3b718
(18) Restoring &session-state
(18) &session-state:Framed-MTU = 1400
(18) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(18) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(18) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(18) authorize {
(18) policy filter_username {
(18) if (&User-Name) {
(18) if (&User-Name) -> TRUE
(18) if (&User-Name) {
(18) if (&User-Name =~ / /) {
(18) if (&User-Name =~ / /) -> FALSE
(18) if (&User-Name =~ /@[^@]*@/ ) {
(18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(18) if (&User-Name =~ /\.\./ ) {
(18) if (&User-Name =~ /\.\./ ) -> FALSE
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(18) if (&User-Name =~ /\.$/) {
(18) if (&User-Name =~ /\.$/) -> FALSE
(18) if (&User-Name =~ /@\./) {
(18) if (&User-Name =~ /@\./) -> FALSE
(18) } # if (&User-Name) = notfound
(18) } # policy filter_username = notfound
(18) [preprocess] = ok
(18) [digest] = noop
(18) suffix: Checking for suffix after "@"
(18) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(18) suffix: No such realm "NULL"
(18) [suffix] = noop
(18) eap: Peer sent EAP Response (code 2) ID 143 length 378
(18) eap: No EAP Start, assuming it's an on-going EAP conversation
(18) [eap] = updated
(18) [files] = noop
(18) [expiration] = noop
(18) [logintime] = noop
(18) } # authorize = updated
(18) Found Auth-Type = eap
(18) # Executing group from file /etc/freeradius/sites-enabled/default
(18) authenticate {
(18) eap: Removing EAP session with state 0x17bfec171330e18d
(18) eap: Previous EAP request found for state 0x17bfec171330e18d, released
from the list
(18) eap: Peer sent packet with method EAP TLS (13)
(18) eap: Calling submodule eap_tls to process data
(18) eap_tls: (TLS) EAP Done initial handshake
(18) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
(18) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, Certificate
(18) eap_tls: (TLS) TLS - Creating attributes from 2 certificate in chain
(18) eap_tls: TLS-Cert-Serial := "6b92ee8fe3454c9b47b46b05a3e74566"
(18) eap_tls: TLS-Cert-Expiration := "340723105705Z"
(18) eap_tls: TLS-Cert-Valid-Since := "240723104705Z"
(18) eap_tls: TLS-Cert-Subject := "/DC=com/DC=secret/CN=secret-CA"
(18) eap_tls: TLS-Cert-Issuer := "/DC=com/DC=secret/CN=secret-CA"
(18) eap_tls: TLS-Cert-Common-Name := "secret-CA"
(18) eap_tls: (TLS) TLS - Creating attributes from 1 certificate in chain
(18) eap_tls: TLS-Client-Cert-Serial :=
"49000004f491f18cbe4b993f480000000004f4"
(18) eap_tls: TLS-Client-Cert-Expiration := "260917152559Z"
(18) eap_tls: TLS-Client-Cert-Valid-Since := "240917152559Z"
(18) eap_tls: TLS-Client-Cert-Subject := "/CN=1YHMMX3"
(18) eap_tls: TLS-Client-Cert-Issuer := "/DC=com/DC=secret/CN=secret-CA"
(18) eap_tls: TLS-Client-Cert-Common-Name := "1YHMMX3"
(18) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web
Client Authentication, E-mail Protection, Microsoft Encrypted File System"
(18) eap_tls: TLS-Client-Cert-X509v3-Subject-Key-Identifier +=
"CF:3E:92:64:E2:D3:D7:68:01:94:FD:52:09:37:18:DD:51:49:C1:83"
(18) eap_tls: TLS-Client-Cert-X509v3-Authority-Key-Identifier +=
"keyid:DB:E9:4E:6C:67:B9:24:1B:0E:CB:22:D7:A3:AA:86:65:F4:85:2F:6C\n"
(18) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.2"
(18) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.4"
(18) eap_tls: TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.4.1.311.10.3.4"
Certificate chain - 1 intermediate CA cert(s) untrusted
To forbid these certificates see 'reject_unknown_intermediate_ca'
(TLS) untrusted certificate with depth [0] subject name /CN=1YHMMX3
(18) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client
certificate
(18) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, CertificateVerify
(18) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read
certificate verify
(18) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, Finished
(18) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read finished
(18) eap_tls: (TLS) TLS - Handshake state - SSLv3/TLS write session ticket
(18) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, NewSessionTicket
(18) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write session
ticket
(18) eap_tls: (TLS) TLS - Connection Established
(18) eap_tls: TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
(18) eap_tls: TLS-Session-Version = "TLS 1.3"
(18) eap_tls: (TLS) EAP Sending final Commitment Message.
(18) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, NewSessionTicket
(18) eap: Sending EAP Request (code 1) ID 144 length 112
(18) eap: EAP session adding &reply:State = 0x17bfec17122fe18d
(18) [eap] = handled
(18) } # authenticate = handled
(18) Using Post-Auth-Type Challenge
(18) # Executing group from file /etc/freeradius/sites-enabled/default
(18) Challenge { ... } # empty sub-section is ignored
(18) session-state: Saving cached attributes
(18) Framed-MTU = 1400
(18) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
ClientHello"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
ServerHello"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
EncryptedExtensions"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateRequest"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Certificate"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
CertificateVerify"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
Finished"
(18) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
Certificate"
(18) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
CertificateVerify"
(18) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
Finished"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
NewSessionTicket"
(18) TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
(18) TLS-Session-Version = "TLS 1.3"
(18) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
NewSessionTicket"
(18) Sent Access-Challenge Id 22 from 10.0.0.4:1812 to secret:44534 length
170
(18) EAP-Message =
0x019000700d8000000066170303004a23cfe46ba1777b39109a34efd0e22cfdfbc5b393dbe2841232c1ae7c21da52deaed27ee45d7436d17a4b09476aa022dda6c5aa74553c22e5ea1def1b09d78bb4438dd61d3e2eebdaa3521703030012008f066d2a43ea5b57720f7d5ad205909ef4
(18) Message-Authenticator = 0x00000000000000000000000000000000
(18) State = 0x17bfec17122fe18dea1aee57ef94a17d
(18) Finished request
Waking up in 4.3 seconds.
(19) Received Access-Request Id 23 from secret:44534 to 10.0.0.4:1812
length 390
(19) User-Name = "host/1YHMMX3"
(19) NAS-IP-Address = secret
(19) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(19) NAS-Port-Type = Wireless-802.11
(19) Service-Type = Framed-User
(19) NAS-Port = 1
(19) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(19) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 37 / Channel:
11"
(19) Acct-Session-Id = "82C6E9505A1A170B"
(19) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(19) WLAN-Pairwise-Cipher = 1027076
(19) WLAN-Group-Cipher = 1027076
(19) WLAN-AKM-Suite = 1027073
(19) Meraki-Network-Name = "secret"
(19) Meraki-Ap-Name = "secret"
(19) Meraki-Ap-Tags = " secret "
(19) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(19) Meraki-Device-Name = "secret"
(19) Framed-MTU = 1400
(19) EAP-Message = 0x029000060d00
(19) State = 0x17bfec17122fe18dea1aee57ef94a17d
(19) Message-Authenticator = 0xfc37430b133aa357cbff57b8966cd168
(19) Restoring &session-state
(19) &session-state:Framed-MTU = 1400
(19) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, ClientHello"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, ServerHello"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
ChangeCipherSpec"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Certificate"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, Finished"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, Certificate"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, CertificateVerify"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS 1.3
Handshake, Finished"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, NewSessionTicket"
(19) &session-state:TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
(19) &session-state:TLS-Session-Version = "TLS 1.3"
(19) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS 1.3
Handshake, NewSessionTicket"
(19) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(19) authorize {
(19) policy filter_username {
(19) if (&User-Name) {
(19) if (&User-Name) -> TRUE
(19) if (&User-Name) {
(19) if (&User-Name =~ / /) {
(19) if (&User-Name =~ / /) -> FALSE
(19) if (&User-Name =~ /@[^@]*@/ ) {
(19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(19) if (&User-Name =~ /\.\./ ) {
(19) if (&User-Name =~ /\.\./ ) -> FALSE
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(19) if (&User-Name =~ /\.$/) {
(19) if (&User-Name =~ /\.$/) -> FALSE
(19) if (&User-Name =~ /@\./) {
(19) if (&User-Name =~ /@\./) -> FALSE
(19) } # if (&User-Name) = notfound
(19) } # policy filter_username = notfound
(19) [preprocess] = ok
(19) [digest] = noop
(19) suffix: Checking for suffix after "@"
(19) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(19) suffix: No such realm "NULL"
(19) [suffix] = noop
(19) eap: Peer sent EAP Response (code 2) ID 144 length 6
(19) eap: No EAP Start, assuming it's an on-going EAP conversation
(19) [eap] = updated
(19) [files] = noop
(19) [expiration] = noop
(19) [logintime] = noop
(19) } # authorize = updated
(19) Found Auth-Type = eap
(19) # Executing group from file /etc/freeradius/sites-enabled/default
(19) authenticate {
(19) eap: Removing EAP session with state 0x17bfec17122fe18d
(19) eap: Previous EAP request found for state 0x17bfec17122fe18d, released
from the list
(19) eap: Peer sent packet with method EAP TLS (13)
(19) eap: Calling submodule eap_tls to process data
(19) eap_tls: (TLS) Peer ACKed our handshake fragment. handshake is
finished
(19) eap_tls: (TLS) cache - Setting up attributes for session resumption
(19) eap_tls: caching EAP-Type = TLS
(19) eap_tls: caching TLS-Cert-Serial :=
"6b92ee8fe3454c9b47b46b05a3e74566"
(19) eap_tls: caching TLS-Cert-Expiration := "340723105705Z"
(19) eap_tls: caching TLS-Cert-Valid-Since := "240723104705Z"
(19) eap_tls: caching TLS-Cert-Subject :=
"/DC=com/DC=secret/CN=secret-CA"
(19) eap_tls: caching TLS-Cert-Issuer :=
"/DC=com/DC=secret/CN=secret-CA"
(19) eap_tls: caching TLS-Cert-Common-Name := "secret-CA"
(19) eap_tls: caching TLS-Client-Cert-Serial :=
"49000004f491f18cbe4b993f480000000004f4"
(19) eap_tls: caching TLS-Client-Cert-Expiration := "260917152559Z"
(19) eap_tls: caching TLS-Client-Cert-Valid-Since := "240917152559Z"
(19) eap_tls: caching TLS-Client-Cert-Subject := "/CN=1YHMMX3"
(19) eap_tls: caching TLS-Client-Cert-Issuer :=
"/DC=com/DC=secret/CN=secret-CA"
(19) eap_tls: caching TLS-Client-Cert-Common-Name := "1YHMMX3"
(19) eap_tls: caching TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS
Web Client Authentication, E-mail Protection, Microsoft Encrypted File
System"
(19) eap_tls: caching TLS-Client-Cert-X509v3-Subject-Key-Identifier +=
"CF:3E:92:64:E2:D3:D7:68:01:94:FD:52:09:37:18:DD:51:49:C1:83"
(19) eap_tls: caching TLS-Client-Cert-X509v3-Authority-Key-Identifier
+= "keyid:DB:E9:4E:6C:67:B9:24:1B:0E:CB:22:D7:A3:AA:86:65:F4:85:2F:6C\n"
(19) eap_tls: caching TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.2"
(19) eap_tls: caching TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.5.5.7.3.4"
(19) eap_tls: caching TLS-Client-Cert-X509v3-Extended-Key-Usage-OID +=
"1.3.6.1.4.1.311.10.3.4"
(19) eap_tls: Failed to find 'persist_dir' in TLS configuration. Session
will not be cached on disk.
(19) eap: Sending EAP Success (code 3) ID 144 length 4
(19) eap: Freeing handler
(19) [eap] = ok
(19) } # authenticate = ok
(19) # Executing section post-auth from file
/etc/freeradius/sites-enabled/default
(19) post-auth {
(19) if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) {
(19) if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE
(19) update {
(19) &reply::Framed-MTU += &session-state:Framed-MTU[*] -> 1400
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.3
Handshake, ClientHello'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, ServerHello'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
ChangeCipherSpec'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, EncryptedExtensions'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, CertificateRequest'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, Certificate'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, CertificateVerify'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, Finished'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.3
Handshake, Certificate'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.3
Handshake, CertificateVerify'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - recv TLS 1.3
Handshake, Finished'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, NewSessionTicket'
(19) &reply::TLS-Session-Cipher-Suite +=
&session-state:TLS-Session-Cipher-Suite[*] -> 'TLS_AES_256_GCM_SHA384'
(19) &reply::TLS-Session-Version +=
&session-state:TLS-Session-Version[*] -> 'TLS 1.3'
(19) &reply::TLS-Session-Information +=
&session-state:TLS-Session-Information[*] -> '(TLS) TLS - send TLS 1.3
Handshake, NewSessionTicket'
(19) } # update = noop
(19) [exec] = noop
(19) policy remove_reply_message_if_eap {
(19) if (&reply:EAP-Message && &reply:Reply-Message) {
(19) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(19) else {
(19) [noop] = noop
(19) } # else = noop
(19) } # policy remove_reply_message_if_eap = noop
(19) if (EAP-Key-Name && &reply:EAP-Session-Id) {
(19) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE
(19) } # post-auth = noop
(19) Login OK: [host/1YHMMX3] (from client AP-Meraki port 1 cli
D4-E9-8A-64-66-AD)
(19) Sent Access-Accept Id 23 from 10.0.0.4:1812 to secret:44534 length 180
(19) MS-MPPE-Recv-Key =
0x48e8db1008b690d21e3c0755f9bd6082b00a2aafeded232f814a1dcbb60321a2
(19) MS-MPPE-Send-Key =
0xedf4acf849e34fb16e8f79ad801510c405c18bc135e648e8ad1aaeb942143f28
(19) EAP-Message = 0x03900004
(19) Message-Authenticator = 0x00000000000000000000000000000000
(19) User-Name = "host/1YHMMX3"
(19) Framed-MTU += 1400
(19) Finished request
Waking up in 4.3 seconds.
(20) Received Accounting-Request Id 24 from secret:50158 to 10.0.0.4:1813
length 290
(20) Acct-Status-Type = Start
(20) Acct-Authentic = RADIUS
(20) User-Name = "host/1YHMMX3"
(20) NAS-IP-Address = secret
(20) NAS-Identifier = "E4-55-A8-06-A9-3E:vap0"
(20) NAS-Port-Type = Wireless-802.11
(20) Service-Type = Framed-User
(20) NAS-Port = 1
(20) Calling-Station-Id = "D4-E9-8A-64-66-AD"
(20) Connect-Info = "CONNECT 54.00 Mbps / 802.11n / RSSI: 38 / Channel:
11"
(20) Acct-Session-Id = "82C6E9505A1A170B"
(20) Acct-Multi-Session-Id = "D1735CC8AF307E3C"
(20) WLAN-Pairwise-Cipher = 1027076
(20) WLAN-Group-Cipher = 1027076
(20) WLAN-AKM-Suite = 1027073
(20) Called-Station-Id = "E4-55-A8-06-A9-3E:secret"
(20) Meraki-Device-Name = "secret"
(20) Framed-IP-Address = 10.69.20.69
(20) Event-Timestamp = "Sep 17 2024 18:35:26 CEST"
(20) Acct-Delay-Time = 0
(20) # Executing section preacct from file
/etc/freeradius/sites-enabled/default
(20) preacct {
(20) [preprocess] = ok
(20) policy acct_unique {
(20) update request {
(20) &Tmp-String-9 := "ai:"
(20) } # update request = noop
(20) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(20) EXPAND %{hex:&Class}
(20) -->
(20) EXPAND ^%{hex:&Tmp-String-9}
(20) --> ^61693a
(20) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(20) else {
(20) update request {
(20) EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(20) --> 4a596a96ca6c6775b2b88de4e2353cee
(20) &Acct-Unique-Session-Id := 4a596a96ca6c6775b2b88de4e2353cee
(20) } # update request = noop
(20) } # else = noop
(20) update request {
(20) &Tmp-String-9 !* ANY
(20) } # update request = noop
(20) } # policy acct_unique = noop
(20) suffix: Checking for suffix after "@"
(20) suffix: No '@' in User-Name = "host/1YHMMX3", looking up realm NULL
(20) suffix: No such realm "NULL"
(20) [suffix] = noop
(20) [files] = noop
(20) } # preacct = ok
(20) # Executing section accounting from file
/etc/freeradius/sites-enabled/default
(20) accounting {
(20) detail: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(20) detail: --> /var/log/freeradius/radacct/secret/detail-20240917
(20) detail:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
expands to /var/log/freeradius/radacct/secret/detail-20240917
(20) detail: EXPAND %t
(20) detail: --> Tue Sep 17 18:35:26 2024
(20) [detail] = ok
(20) [unix] = ok
(20) [exec] = noop
(20) attr_filter.accounting_response: EXPAND %{User-Name}
(20) attr_filter.accounting_response: --> host/1YHMMX3
(20) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(20) [attr_filter.accounting_response] = updated
(20) } # accounting = updated
(20) Sent Accounting-Response Id 24 from 10.0.0.4:1813 to secret:50158
length 20
(20) Finished request
(20) Cleaning up request packet ID 24 with timestamp +238 due to done
Waking up in 4.2 seconds.
(13) Cleaning up request packet ID 17 with timestamp +237 due to
cleanup_delay was reached
(14) Cleaning up request packet ID 18 with timestamp +237 due to
cleanup_delay was reached
(15) Cleaning up request packet ID 19 with timestamp +237 due to
cleanup_delay was reached
(16) Cleaning up request packet ID 20 with timestamp +237 due to
cleanup_delay was reached
Waking up in 0.4 seconds.
(17) Cleaning up request packet ID 21 with timestamp +238 due to
cleanup_delay was reached
(18) Cleaning up request packet ID 22 with timestamp +238 due to
cleanup_delay was reached
(19) Cleaning up request packet ID 23 with timestamp +238 due to
cleanup_delay was reached
Ready to process requests
```
More information about the Freeradius-Users
mailing list