Fwd: General question about RadSec implementation on FR 3.2.x

[Dominic Stalder]

Hi guys

Maybe any idea / recommendations on the „threading error“ while starting freeradius with the new TLS configuration?

Regards
Dominic

> Follow up on the radsec configuration: I configured /etc/freeradius/sites-available/tls but get the following error while starting freeradius in debug mode (see debug output below):
> 
> 
> /etc/freeradius/sites-enabled/tls[44]: Threading must be enabled for TLS sockets to function properly
> /etc/freeradius/sites-enabled/tls[44]: You probably need to do 'radiusd -fxx -l stdout' for debugging
> 
> 
> 
> 
> I checked the global freeradius daemon configuration and threading shoudl be enabled: /etc/freeradius/radiusd.conf
> 
> 
> thread pool {
> # Number of servers to start initially --- should be a reasonable
> # ballpark figure.
> start_servers = 5
> 
> 
> # Limit on the total number of servers running.
> #
> # If this limit is ever reached, clients will be LOCKED OUT, so it
> # should NOT BE SET TOO LOW. It is intended mainly as a brake to
> # keep a runaway server from taking the system with it as it spirals
> # down...
> #
> # You may find that the server is regularly reaching the
> # 'max_servers' number of threads, and that increasing
> # 'max_servers' doesn't seem to make much difference.
> #
> # If this is the case, then the problem is MOST LIKELY that
> # your back-end databases are taking too long to respond, and
> # are preventing the server from responding in a timely manner.
> #
> # The solution is NOT do keep increasing the 'max_servers'
> # value, but instead to fix the underlying cause of the
> # problem: slow database, or 'hostname_lookups=yes'.
> #
> # For more information, see 'max_request_time', above.
> #
> max_servers = 32
> 
> 
> # Server-pool size regulation. Rather than making you guess
> # how many servers you need, FreeRADIUS dynamically adapts to
> # the load it sees, that is, it tries to maintain enough
> # servers to handle the current load, plus a few spare
> # servers to handle transient load spikes.
> #
> # It does this by periodically checking how many servers are
> # waiting for a request. If there are fewer than
> # min_spare_servers, it creates a new spare. If there are
> # more than max_spare_servers, some of the spares die off.
> # The default values are probably OK for most sites.
> #
> min_spare_servers = 3
> max_spare_servers = 10
> 
> 
> # When the server receives a packet, it places it onto an
> # internal queue, where the worker threads (configured above)
> # pick it up for processing. The maximum size of that queue
> # is given here.
> #
> # When the queue is full, any new packets will be silently
> # discarded.
> #
> # The most common cause of the queue being full is that the
> # server is dependent on a slow database, and it has received
> # a large "spike" of traffic. When that happens, there is
> # very little you can do other than make sure the server
> # receives less traffic, or make sure that the database can
> # handle the load.
> #
> # max_queue_size = 65536
> 
> 
> # Clean up old threads periodically. For no reason other than
> # it might be useful.
> #
> # '0' is a special value meaning 'infinity', or 'the servers never
> # exit'
> max_requests_per_server = 0
> 
> 
> # Automatically limit the number of accounting requests.
> # This configuration item tracks how many requests per second
> # the server can handle. It does this by tracking the
> # packets/s received by the server for processing, and
> # comparing that to the packets/s handled by the child
> # threads.
> #
> 
> 
> # If the received PPS is larger than the processed PPS, *and*
> # the queue is more than half full, then new accounting
> # requests are probabilistically discarded. This lowers the
> # number of packets that the server needs to process. Over
> # time, the server will "catch up" with the traffic.
> #
> # Throwing away accounting packets is usually safe and low
> # impact. The NAS will retransmit them in a few seconds, or
> # even a few minutes. Vendors should read RFC 5080 Section 2.2.1
> # to see how accounting packets should be retransmitted. Using
> # any other method is likely to cause network meltdowns.
> #
> auto_limit_acct = no
> }
> 
> 
> 
> 
> root at id-radiustest1:~# freeradius -X
> FreeRADIUS Version 3.2.7
> Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/dictionary
> including configuration file /etc/freeradius/radiusd.conf
> including configuration file /etc/freeradius/proxy.conf
> including configuration file /etc/freeradius/clients.conf
> including files in directory /etc/freeradius/mods-enabled/
> including configuration file /etc/freeradius/mods-enabled/preprocess
> including configuration file /etc/freeradius/mods-enabled/utf8
> including configuration file /etc/freeradius/mods-enabled/expr
> including configuration file /etc/freeradius/mods-enabled/expiration
> including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit
> including configuration file /etc/freeradius/mods-enabled/passwd
> including configuration file /etc/freeradius/mods-enabled/sradutmp
> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/mods-enabled/digest
> including configuration file /etc/freeradius/mods-enabled/chap
> including configuration file /etc/freeradius/mods-enabled/unix
> including configuration file /etc/freeradius/mods-enabled/always
> including configuration file /etc/freeradius/mods-enabled/linelog
> including configuration file /etc/freeradius/mods-enabled/soh
> including configuration file /etc/freeradius/mods-enabled/date
> including configuration file /etc/freeradius/mods-enabled/pap
> including configuration file /etc/freeradius/mods-enabled/totp
> including configuration file /etc/freeradius/mods-enabled/rest
> including configuration file /etc/freeradius/mods-enabled/files
> including configuration file /etc/freeradius/mods-enabled/echo
> including configuration file /etc/freeradius/mods-enabled/replicate
> including configuration file /etc/freeradius/mods-enabled/exec
> including configuration file /etc/freeradius/mods-enabled/eap
> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/mods-enabled/radutmp
> including configuration file /etc/freeradius/mods-enabled/attr_filter
> including configuration file /etc/freeradius/mods-enabled/mschap
> including configuration file /etc/freeradius/mods-enabled/logintime
> including configuration file /etc/freeradius/mods-enabled/realm
> including configuration file /etc/freeradius/mods-enabled/detail
> including configuration file /etc/freeradius/mods-enabled/unpack
> including configuration file /etc/freeradius/mods-enabled/detail.log
> including files in directory /etc/freeradius/policy.d/
> including configuration file /etc/freeradius/policy.d/operator-name
> including configuration file /etc/freeradius/policy.d/debug
> including configuration file /etc/freeradius/policy.d/filter
> including configuration file /etc/freeradius/policy.d/accounting
> including configuration file /etc/freeradius/policy.d/canonicalization
> including configuration file /etc/freeradius/policy.d/abfab-tr
> including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/policy.d/rfc7542
> including configuration file /etc/freeradius/policy.d/cui
> including configuration file /etc/freeradius/policy.d/eap
> including configuration file /etc/freeradius/policy.d/dhcp
> including configuration file /etc/freeradius/policy.d/control
> including files in directory /etc/freeradius/sites-enabled/
> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/sites-enabled/tls
> including configuration file /etc/freeradius/sites-enabled/default
> including configuration file /etc/freeradius/sites-enabled/status
> including configuration file /etc/freeradius/sites-enabled/proxy-inner-tunnel
> including configuration file /etc/freeradius/sites-enabled/control-socket
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/freeradius"
> run_dir = "/var/run/freeradius"
> libdir = "/usr/lib/freeradius"
> radacctdir = "/var/log/freeradius/radacct"
> hostname_lookups = no
> max_request_time = 30
> proxy_dedup_window = 1
> cleanup_delay = 5
> max_requests = 16384
> max_fds = 512
> postauth_client_lost = no
> pidfile = "/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = yes
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> require_message_authenticator = "auto"
> limit_proxy_state = "auto"
> }
> unlang {
> group_stop_return = no
> policy_stop_return = no
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server ftlr1.eduroam.ch-TLS {
> nonblock = no
> ipaddr = 130.59.31.24
> port = 2083
> type = "auth+acct"
> proto = "tcp"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 300
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> tls {
> verify_depth = 0
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/radsec-id-radius.unibe.ch.key"
> certificate_file = "/etc/freeradius/certs/radsec-id-radius.unibe.ch.pem"
> ca_file = "/etc/freeradius/certs/edupki-root-ca-cert.pem"
> fragment_size = 8192
> include_length = yes
> check_crl = no
> ca_path_reload_interval = 0
> ecdh_curve = "prime256v1"
> tls_min_version = "1.2"
> }
> home_server ftlr2.eduroam.ch-TLS {
> nonblock = no
> ipaddr = 130.59.31.25
> port = 2083
> type = "auth+acct"
> proto = "tcp"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 300
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> tls {
> verify_depth = 0
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/radsec-id-radius.unibe.ch.key"
> certificate_file = "/etc/freeradius/certs/radsec-id-radius.unibe.ch.pem"
> ca_file = "/etc/freeradius/certs/edupki-root-ca-cert.pem"
> fragment_size = 8192
> include_length = yes
> check_crl = no
> ca_path_reload_interval = 0
> ecdh_curve = "prime256v1"
> tls_min_version = "1.2"
> }
> home_server aai-nps-eduv2.campus.unibe.ch {
> nonblock = no
> ipaddr = 130.92.14.27
> port = 1812
> type = "auth+acct"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "none"
> ping_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 300
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> realm NULL {
> }
> realm LOCAL {
> }
> realm UNIBE.CH {
> nostrip
> }
> realm STUDENTS.UNIBE.CH {
> nostrip
> }
> realm FACULTY.UNIBE.CH {
> nostrip
> }
> realm EXT.UNIBE.CH {
> nostrip
> }
> realm ~(.*\.UNIBE\.CH$) {
> virtual_server = reject
> }
> home_server_pool SWITCH-EDUROAM-TLS {
> type = fail-over
> home_server = ftlr1.eduroam.ch-TLS
> home_server = ftlr2.eduroam.ch-TLS
> }
> realm ~(.*PHBERN\.CH$) {
> auth_pool = SWITCH-EDUROAM-TLS
> nostrip
> }
> realm ~(.*\.GET\.EDUROAM\.ORG$) {
> auth_pool = SWITCH-EDUROAM-TLS
> nostrip
> }
> home_server_pool UNIBE-NPS-DEV {
> type = fail-over
> home_server = aai-nps-eduv2.campus.unibe.ch
> }
> realm REALM-NPS-DEV {
> pool = UNIBE-NPS-DEV
> }
> realm DEFAULT {
> auth_pool = SWITCH-EDUROAM-TLS
> nostrip
> }
> radiusd: #### Loading Clients ####
> client ftlr1.eduroam.ch-TLS {
> ipaddr = 130.59.31.24
> netmask = 32
> require_message_authenticator = "no"
> secret = <<< secret >>>
> virtual_server = "default"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Shared secret for client ftlr1.eduroam.ch-TLS is short, and likely can be broken by an attacker.
> client ftlr2.eduroam.ch-TLS {
> ipaddr = 130.59.31.25
> netmask = 32
> require_message_authenticator = "no"
> secret = <<< secret >>>
> virtual_server = "default"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Shared secret for client ftlr2.eduroam.ch-TLS is short, and likely can be broken by an attacker.
> client localhost {
> ipaddr = 127.0.0.1
> netmask = 32
> require_message_authenticator = "no"
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client cisco-wlc-9800-mgmt.wifi.unibe.ch {
> ipaddr = 130.92.42.20
> netmask = 32
> require_message_authenticator = "no"
> secret = <<< secret >>>
> virtual_server = "default"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client cisco-wlc-9800-dev-mgmt.wifi.unibe.ch {
> ipaddr = 130.92.42.15
> netmask = 32
> require_message_authenticator = "no"
> secret = <<< secret >>>
> virtual_server = "default"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client uvisrz0215.insel.ch {
> ipaddr = 161.62.201.77
> netmask = 32
> require_message_authenticator = "no"
> secret = <<< secret >>>
> virtual_server = "default"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> Configuration version: d53a-826f-8cee-356b
> systemd watchdog is disabled
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Autz-Type = Status-Server
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
> # Loaded module rlm_proxy_rate_limit
> # Loading module "proxy_rate_limit" from file /etc/freeradius/mods-enabled/proxy_rate_limit
> proxy_rate_limit {
> max_entries = 2048
> idle_timeout = 10
> num_subtables = 256
> window = 1
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/freeradius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
> unix {
> radwtmp = "/var/log/freeradius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_linelog
> # Loading module "802.1x_auth_log" from file /etc/freeradius/mods-enabled/linelog
> linelog 802.1x_auth_log {
> filename = "/var/log/freeradius/802.1x_auth.log"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "%t : AuthZ: (%I) %{reply:Packet-Type}: [%{%{reply:User-Name}:-%{User-Name}}] TLS-Version=%{%{session-state:TLS-Session-Version}:-NULL} TLS-Ciphers=%{%{session-state:TLS-Session-Cipher-Suite}:-NULL} SSID=%{%{request:Called-Station-SSID}:-NULL} Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{request:Called-Station-Id}:-Unknown} Filter-ID=%{%{reply:Filter-Id}:-NULL} VLAN=%{%{reply:Tunnel-Private-Group-Id}:-NULL} Class=%{%{reply:Class}:-NULL} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} operator-name %{%{request:Operator-Name}:-Unknown})"
> }
> # Loading module "MAC_auth_log" from file /etc/freeradius/mods-enabled/linelog
> linelog MAC_auth_log {
> filename = "/var/log/freeradius/mac_auth.log"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "%t : MAC Auth: (%I) %{reply:Packet-Type}: [%{%{Calling-Station-Id}:-NULL}] REST-Module-Reply=%{%{reply:REST-HTTP-Body}:-NULL}"
> }
> # Loading module "802.1x_acct_log" from file /etc/freeradius/mods-enabled/linelog
> linelog 802.1x_acct_log {
> filename = "/var/log/freeradius/802.1x_acct.log"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "%t : Acct: (%I) Accounting-%{%{Acct-Status-Type}:-Unknown}: [%{User-Name}] Acct-Session-Id=%{%{Acct-Session-Id}:-Unknown} Acct-Terminate-Cause=%{%{Acct-Terminate-Cause}:-Unknown} Acct-Session-Time=%{%{Acct-Session-Time}:-Unknown} seconds Calling-Station-Id=%{%{request:Calling-Station-Id}:-Unknown} Called-Station-Id=%{%{NAS-Identifier}:-Unknown} Framed-IP-Address=%{%{Framed-IP-Address}:-Uknown} (from client %{Client-Shortname} port %{%{request:Nas-Port}:-0} operator-name %{%{request:Operator-Name}:-Unknown})"
> }
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_date
> # Loading module "date" from file /etc/freeradius/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
> date wispr2date {
> format = "%Y-%m-%dT%H:%M:%S"
> utc = no
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_totp
> # Loading module "totp" from file /etc/freeradius/mods-enabled/totp
> totp {
> time_step = 30
> otp_length = 6
> lookback_steps = 1
> lookback_interval = 30
> lookforward_steps = 0
> }
> # Loaded module rlm_rest
> # Loading module "rest" from file /etc/freeradius/mods-enabled/rest
> rest {
> connect_uri = "https://infoblox.some.domain/"/ <https://infoblox.some.domain/"/>
> connect_timeout = 4.000000
> http_negotiation = "default"
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/mods-enabled/files
> files {
> filename = "/etc/freeradius/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
> eap {
> default_eap_type = "PEAP"
> timer_expire = 60
> max_eap_type = 52
> ignore_unknown_eap_types = yes
> cisco_accounting_username_bug = no
> max_sessions = 8192
> dedup_key = ""
> }
> # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/freeradius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.coa {
> filename = "/etc/freeradius/mods-config/attr_filter/coa"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
> detail {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
> # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
> detail auth_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
> detail reply_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> instantiate {
> }
> # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
> # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
> # Instantiating module "proxy_rate_limit" from file /etc/freeradius/mods-enabled/proxy_rate_limit
> # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "802.1x_auth_log" from file /etc/freeradius/mods-enabled/linelog
> # Instantiating module "MAC_auth_log" from file /etc/freeradius/mods-enabled/linelog
> # Instantiating module "802.1x_acct_log" from file /etc/freeradius/mods-enabled/linelog
> # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
> # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
> # Instantiating module "rest" from file /etc/freeradius/mods-enabled/rest
> authorize {
> uri = "https://infoblox.some.domain/wapi/v2.11.3/record:host?network=%25 <https://infoblox.some.domain/wapi/v2.11.3/record:host?network=%25>{locMacAuth-IP-Subnet}&mac=%{tolower:%{request:locMacAuth-Calling-Station-Id}}"
> method = "get"
> body = "none"
> attr_num = no
> raw_value = no
> force_to = "plain"
> auth = "basic"
> username = "xyz"
> password = "xyz"
> require_auth = yes
> timeout = 4.000000
> chunk = 0
> tls {
> check_cert = yes
> check_cert_cn = yes
> }
> body_uri_encode = yes
> }
> rlm_rest: libcurl version: libcurl/7.81.0 OpenSSL/3.0.2 zlib/1.2.11 brotli/1.0.9 zstd/1.4.8 libidn2/2.3.2 libpsl/0.21.0 (+libidn2/2.3.2) libssh/0.9.6/openssl/zlib nghttp2/1.43.0 librtmp/2.3 OpenLDAP/2.5.18
> rlm_rest (rest): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> max_retries = 5
> spread = no
> }
> rlm_rest (rest): Opening additional connection (0), 1 of 32 pending slots used
> rlm_rest (rest): Connecting to "https://infoblox.some.domain/" <https://infoblox.some.domain/">
> rlm_rest (rest): Opening additional connection (1), 1 of 31 pending slots used
> rlm_rest (rest): Connecting to "https://infoblox.some.domain/" <https://infoblox.some.domain/">
> rlm_rest (rest): Opening additional connection (2), 1 of 30 pending slots used
> rlm_rest (rest): Connecting to "https://infoblox.some.domain/" <https://infoblox.some.domain/">
> rlm_rest (rest): Opening additional connection (3), 1 of 29 pending slots used
> rlm_rest (rest): Connecting to "https://infoblox.some.domain/" <https://infoblox.some.domain/">
> rlm_rest (rest): Opening additional connection (4), 1 of 28 pending slots used
> rlm_rest (rest): Connecting to "https://infoblox.some.domain/" <https://infoblox.some.domain/">
> # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
> reading pairlist file /etc/freeradius/mods-config/files/authorize
> reading pairlist file /etc/freeradius/mods-config/files/accounting
> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
> # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> proxy_tunneled_request_as_eap = yes
> virtual_server = "proxy-inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/certs"
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/aai.unibe.ch.key"
> certificate_file = "/etc/freeradius/certs/aai.unibe.ch.pem"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 0
> cipher_list = "ECDHE-RSA-AES128-GCM-SHA256 ECDHE-RSA-AES256-GCM-SHA384 ECDHE-RSA-CHACHA20-POLY1305 TLS_AES_256_GCM_SHA384"
> reject_unknown_intermediate_ca = no
> ecdh_curve = "prime256v1"
> tls_max_version = "1.3"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 12
> name = "EAP module"
> max_entries = 0
> persist_dir = "/var/log/freeradius/tlscache"
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = no
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
> # Instantiating module "attr_filter.coa" from file /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
> # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
> # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
> # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/radiusd.conf
> } # server
> server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:336
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> } # server inner-tunnel
> server default { # from file /etc/freeradius/sites-enabled/default
> # Loading authenticate {...}
> Compiling Auth-Type Accept for attr Auth-Type
> Compiling Auth-Type eap for attr Auth-Type
> # Loading authorize {...}
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading pre-proxy {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> } # server default
> server status { # from file /etc/freeradius/sites-enabled/status
> # Loading authorize {...}
> Compiling Autz-Type Status-Server for attr Autz-Type
> } # server status
> server proxy-inner-tunnel { # from file /etc/freeradius/sites-enabled/proxy-inner-tunnel
> # Loading authenticate {...}
> Compiling Auth-Type mschap for attr Auth-Type
> # Loading authorize {...}
> } # server proxy-inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth+acct"
> virtual_server = "default"
> ipaddr = *
> port = 2083
> proto = "tcp"
> tls {
> verify_depth = 0
> ca_path = "/etc/freeradius/certs"
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/radsec-id-radius.unibe.ch.key"
> certificate_file = "/etc/freeradius/certs/radsec-id-radius.unibe.ch.pem"
> ca_file = "/etc/freeradius/certs/edupki-root-ca-cert.pem"
> fragment_size = 8192
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 3600
> allow_expired_crl = no
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> require_client_cert = yes
> reject_unknown_intermediate_ca = no
> ecdh_curve = "prime256v1"
> tls_max_version = "1.3"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = no
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> check_client_connections = no
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> clients = "radsec"
> }
> listen {
> type = "control"
> listen {
> socket = "/var/run/freeradius/control/freeradius.sock"
> uid = "freerad"
> gid = "freerad"
> mode = "rw"
> peercred = no
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 1812
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 1813
> }
> listen {
> type = "status"
> ipaddr = 127.0.0.1
> port = 18121
> client admin {
> ipaddr = 127.0.0.1
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Shared secret for client admin is short, and likely can be broken by an attacker.
> }
> /etc/freeradius/sites-enabled/tls[44]: Threading must be enabled for TLS sockets to function properly
> /etc/freeradius/sites-enabled/tls[44]: You probably need to do 'radiusd -fxx -l stdout' for debugging
> 
> 
> Additional debug output:
> 
> 
> root at id-radiustest1:~# radiusd -fxx -l stdout
> FreeRADIUS Version 3.2.5
> Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/local/share/freeradius/dictionary
> including dictionary file /usr/local/share/freeradius/dictionary.dhcp
> including dictionary file /usr/local/share/freeradius/dictionary.vqp
> including dictionary file /usr/local/etc/raddb/dictionary
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including files in directory /usr/local/etc/raddb/mods-enabled/
> including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
> including configuration file /usr/local/etc/raddb/mods-enabled/utf8
> including configuration file /usr/local/etc/raddb/mods-enabled/expr
> including configuration file /usr/local/etc/raddb/mods-enabled/expiration
> including configuration file /usr/local/etc/raddb/mods-enabled/passwd
> including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
> including configuration file /usr/local/etc/raddb/mods-enabled/digest
> including configuration file /usr/local/etc/raddb/mods-enabled/chap
> including configuration file /usr/local/etc/raddb/mods-enabled/unix
> including configuration file /usr/local/etc/raddb/mods-enabled/always
> including configuration file /usr/local/etc/raddb/mods-enabled/linelog
> including configuration file /usr/local/etc/raddb/mods-enabled/soh
> including configuration file /usr/local/etc/raddb/mods-enabled/date
> including configuration file /usr/local/etc/raddb/mods-enabled/pap
> including configuration file /usr/local/etc/raddb/mods-enabled/totp
> including configuration file /usr/local/etc/raddb/mods-enabled/files
> including configuration file /usr/local/etc/raddb/mods-enabled/echo
> including configuration file /usr/local/etc/raddb/mods-enabled/replicate
> including configuration file /usr/local/etc/raddb/mods-enabled/exec
> including configuration file /usr/local/etc/raddb/mods-enabled/eap
> including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
> including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
> including configuration file /usr/local/etc/raddb/mods-enabled/mschap
> including configuration file /usr/local/etc/raddb/mods-enabled/logintime
> including configuration file /usr/local/etc/raddb/mods-enabled/realm
> including configuration file /usr/local/etc/raddb/mods-enabled/detail
> including configuration file /usr/local/etc/raddb/mods-enabled/unpack
> including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
> including files in directory /usr/local/etc/raddb/policy.d/
> including configuration file /usr/local/etc/raddb/policy.d/operator-name
> including configuration file /usr/local/etc/raddb/policy.d/debug
> including configuration file /usr/local/etc/raddb/policy.d/filter
> including configuration file /usr/local/etc/raddb/policy.d/accounting
> including configuration file /usr/local/etc/raddb/policy.d/canonicalization
> including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
> including configuration file /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
> including configuration file /usr/local/etc/raddb/policy.d/rfc7542
> including configuration file /usr/local/etc/raddb/policy.d/cui
> including configuration file /usr/local/etc/raddb/policy.d/eap
> including configuration file /usr/local/etc/raddb/policy.d/dhcp
> including configuration file /usr/local/etc/raddb/policy.d/control
> including files in directory /usr/local/etc/raddb/sites-enabled/
> including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
> including configuration file /usr/local/etc/raddb/sites-enabled/default
> main {
> security {
> user = "freerad"
> group = "freerad"
> allow_core_dumps = no
> }
> name = "freeradius"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/freeradius"
> }
> main {
> name = "freeradius"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> sbindir = "/usr/local/sbin"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/freeradius"
> libdir = "/usr/local/lib"
> radacctdir = "/usr/local/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> proxy_dedup_window = 1
> cleanup_delay = 5
> max_requests = 16384
> max_fds = 512
> postauth_client_lost = no
> pidfile = "/usr/local/var/run/freeradius/freeradius.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> allow_vulnerable_openssl = "no"
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> nonblock = no
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = digest
> # Creating Autz-Type = New-TLS-Connection
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
> # Loaded module rlm_expr
> # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
> expr {
> safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_radutmp
> # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/usr/local/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_digest
> # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
> # Loaded module rlm_chap
> # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
> # Loaded module rlm_unix
> # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/usr/local/var/log/radius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_always
> # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/usr/local/var/log/radius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/usr/local/var/log/radius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_soh
> # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loaded module rlm_date
> # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "wispr2date" from file /usr/local/etc/raddb/mods-enabled/date
> date wispr2date {
> format = "%Y-%m-%dT%H:%M:%S"
> utc = no
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_totp
> # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp
> totp {
> time_step = 30
> otp_length = 6
> lookback_steps = 1
> lookback_interval = 30
> lookforward_steps = 0
> }
> # Loaded module rlm_files
> # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
> files {
> filename = "/usr/local/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
> # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_eap
> # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> max_eap_type = 52
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> dedup_key = ""
> }
> # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/usr/local/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.coa {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
> detail {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
> # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> instantiate {
> }
> # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
> # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
> # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
> # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
> # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
> # Instantiating module "totp" from file /usr/local/etc/raddb/mods-enabled/totp
> # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
> reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
> reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
> # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/usr/local/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> ca_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 0
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> reject_unknown_intermediate_ca = no
> ecdh_curve = ""
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/" <http://127.0.0.1/ocsp/">
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
> # Instantiating module "attr_filter.coa" from file /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa
> # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
> # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "bangpath" from file /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
> # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
> # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /usr/local/etc/raddb/radiusd.conf
> } # server
> server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' -- /usr/local/etc/raddb/sites-enabled/inner-tunnel:366
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> } # server inner-tunnel
> server default { # from file /usr/local/etc/raddb/sites-enabled/default
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> Compiling Autz-Type New-TLS-Connection for attr Autz-Type
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
> Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
> } # server default
> thread pool {
> start_servers = 5
> max_servers = 32
> min_spare_servers = 3
> max_spare_servers = 10
> max_requests_per_server = 0
> cleanup_delay = 5
> max_queue_size = 65536
> auto_limit_acct = no
> }
> Thread spawned new child 1. Total threads in pool: 1
> Thread spawned new child 2. Total threads in pool: 2
> Thread 1 waiting to be assigned a request
> Thread 2 waiting to be assigned a request
> Thread 3 waiting to be assigned a request
> Thread spawned new child 3. Total threads in pool: 3
> Thread spawned new child 4. Total threads in pool: 4
> Thread 4 waiting to be assigned a request
> Thread spawned new child 5. Total threads in pool: 5
> Thread 5 waiting to be assigned a request
> Thread pool initialized
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> Failed opening auth address :: port 1812 bound to server default: Address family not supported by protocol
> /usr/local/etc/raddb/sites-enabled/default[246]: Error binding to port for :: port 1812
> _EXIT(1) CALLED src/main/process.c[6325]. Last error was: /usr/local/lib/proto_auth.so: cannot open shared object file: No such file or directory
> 
> 
> 
> 
> 
> 
> 
> 
> Am 17.04.25, 13:22 schrieb "Freeradius-Users im Auftrag von Alan DeKok" <freeradius-users-bounces+dominic.stalder=unibe.ch at lists.freeradius.org <mailto:unibe.ch at lists.freeradius.org> <mailto:unibe.ch at lists.freeradius.org <mailto:unibe.ch at lists.freeradius.org>> im Auftrag von aland at deployingradius.com <mailto:aland at deployingradius.com> <mailto:aland at deployingradius.com <mailto:aland at deployingradius.com>>>:
> 
> 
> 
> 
> On Apr 17, 2025, at 2:24 AM, <dominic.stalder at unibe.ch <mailto:dominic.stalder at unibe.ch> <mailto:dominic.stalder at unibe.ch <mailto:dominic.stalder at unibe.ch>>> <dominic.stalder at unibe.ch <mailto:dominic.stalder at unibe.ch> <mailto:dominic.stalder at unibe.ch <mailto:dominic.stalder at unibe.ch>>> wrote:
>> 
>> Hi Alan
>> 
>> Thanks for the fast and informative feedback. When I get your answer correct, I can just can put:
>> 
>> 1. all RADIUS [UDP] & RadSec [TCP] clients into clients.conf and it does work
>> 
>> 2. all RADIUS [UDP] & RadSec [TCP] home servers into proxy.conf and it does work
>> 
>> So I can "consolidate" all clients and all home servers in one location respectively?
> 
> 
> 
> 
> Yes.
> 
> 
> 
> 
> The file names don't matter. All of the files are merged into one via $INCLUDE statements. So you can add clients to the bottom of a virtual server file if you want.
> 
> 
> 
> 
> What matters is the sections. If you put clients into a "name { ...} " section, then they won't be found. Each section has a pre-defined purpose, and a pre-defined content.
> 
> 
> 
> 
> Alan DeKok.
> 
> 
> 
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html <http://www.freeradius.org/list/users.html> <http://www.freeradius.org/list/users.html> <http://www.freeradius.org/list/users.html;>
> 
> 
> 
> 
> 
> 
> 
> 
>