freeradius - TLS1.3 support
Akhil Pillai
akhilpillai101 at gmail.com
Fri Feb 14 15:53:20 UTC 2025
This one should have the whole debug out i think.
root at OpenWrt:~# radiusd -X 2>&1 | tee debugfile
FreeRADIUS Version 3.2.5
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius3/dictionary
including dictionary file /etc/freeradius3/dictionary
including configuration file /etc/freeradius3/radiusd.conf
including configuration file /etc/freeradius3/proxy.conf
including configuration file /etc/freeradius3/clients.conf
including files in directory /etc/freeradius3/mods-enabled/
including configuration file /etc/freeradius3/mods-enabled/always
including configuration file /etc/freeradius3/mods-enabled/attr_filter
including configuration file /etc/freeradius3/mods-enabled/chap
including configuration file /etc/freeradius3/mods-enabled/detail
including configuration file /etc/freeradius3/mods-enabled/digest
including configuration file /etc/freeradius3/mods-enabled/eap
including configuration file /etc/freeradius3/mods-enabled/exec
including configuration file /etc/freeradius3/mods-enabled/expiration
including configuration file /etc/freeradius3/mods-enabled/expr
including configuration file /etc/freeradius3/mods-enabled/files
including configuration file /etc/freeradius3/mods-enabled/logintime
including configuration file /etc/freeradius3/mods-enabled/mschap
including configuration file /etc/freeradius3/mods-enabled/pap
including configuration file /etc/freeradius3/mods-enabled/passwd
including configuration file /etc/freeradius3/mods-enabled/preprocess
including configuration file /etc/freeradius3/mods-enabled/radutmp
including configuration file /etc/freeradius3/mods-enabled/realm
including configuration file /etc/freeradius3/mods-enabled/sradutmp
including configuration file /etc/freeradius3/mods-enabled/unix
including files in directory /etc/freeradius3/policy.d/
including configuration file /etc/freeradius3/policy.d/accounting
including configuration file /etc/freeradius3/policy.d/eap
including configuration file /etc/freeradius3/policy.d/filter
including files in directory /etc/freeradius3/sites-enabled/
including configuration file /etc/freeradius3/sites-enabled/default
including configuration file /etc/freeradius3/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib/freeradius3"
radacctdir = "/var/db/radacct"
hostname_lookups = no
max_request_time = 30
proxy_dedup_window = 1
cleanup_delay = 5
max_requests = 16384
max_fds = 512
postauth_client_lost = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
require_message_authenticator = "auto"
limit_proxy_state = "auto"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
nonblock = no
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client abc81 {
ipaddr = 192.168.1.81
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abc83 {
ipaddr = 192.168.1.83
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abcnet {
ipaddr = 192.168.1.0/24
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abcBL020 {
ipaddr = 192.168.1.20
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abcBL002 {
ipaddr = 192.168.1.92
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abcBL016 {
ipaddr = 192.168.1.96
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abcnet {
ipaddr = 172.27.70.0/24
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client abcnet {
ipaddr = 172.27.80.0/24
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost {
ipv4addr = *
require_message_authenticator = "no"
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client routertest {
ipaddr = 172.27.70.15
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius3/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius3/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius3/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius3/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius3/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius3/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius3/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius3/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius3/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius3/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius3/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius3/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius3/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius3/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius3/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius3/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius3/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius3/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius3/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/freeradius3/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/freeradius3/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius3/mods-enabled/chap
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius3/mods-enabled/detail
detail {
filename =
"/var/db/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius3/mods-enabled/digest
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius3/mods-enabled/eap
eap {
default_eap_type = "tls"
timer_expire = 60
max_eap_type = 52
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
dedup_key = ""
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius3/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius3/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius3/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius3/mods-enabled/files
files {
filename = "/etc/freeradius3/mods-config/files/authorize"
acctusersfile = "/etc/freeradius3/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius3/mods-config/files/pre-proxy"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius3/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius3/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius3/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius3/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius3/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius3/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius3/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius3/mods-enabled/radutmp
radutmp {
filename = "/var/log/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius3/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius3/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/freeradius3/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius3/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius3/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loading module "sradutmp" from file
/etc/freeradius3/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius3/mods-enabled/unix
unix {
radwtmp = "/var/log/radwtmp"
}
Creating attribute Unix-Group
instantiate {
}
# Instantiating module "reject" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius3/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius3/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius3/mods-enabled/attr_filter
reading pairlist file /etc/freeradius3/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius3/mods-enabled/attr_filter
reading pairlist file /etc/freeradius3/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius3/mods-enabled/attr_filter
reading pairlist file /etc/freeradius3/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius3/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius3/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius3/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius3/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/freeradius3/mods-enabled/attr_filter
reading pairlist file /etc/freeradius3/mods-config/attr_filter/coa
# Instantiating module "detail" from file
/etc/freeradius3/mods-enabled/detail
# Instantiating module "eap" from file /etc/freeradius3/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius3/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius3/certs/hostapd.server.prv"
certificate_file = "/etc/freeradius3/certs/hostapd.server.pem"
ca_file = "/etc/freeradius3/certs/hostapd.ca.pem"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT at SECLEVEL=1"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.3"
tls_min_version = "1.3"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "tls"
copy_request_to_tunnel = yes
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file
/etc/freeradius3/mods-enabled/expiration
# Instantiating module "files" from file
/etc/freeradius3/mods-enabled/files
reading pairlist file /etc/freeradius3/mods-config/files/authorize
reading pairlist file /etc/freeradius3/mods-config/files/accounting
reading pairlist file /etc/freeradius3/mods-config/files/pre-proxy
# Instantiating module "logintime" from file
/etc/freeradius3/mods-enabled/logintime
# Instantiating module "mschap" from file
/etc/freeradius3/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/freeradius3/mods-enabled/pap
# Instantiating module "etc_passwd" from file
/etc/freeradius3/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file
/etc/freeradius3/mods-enabled/preprocess
reading pairlist file /etc/freeradius3/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius3/mods-config/preprocess/hints
# Instantiating module "IPASS" from file
/etc/freeradius3/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius3/mods-enabled/realm
# Instantiating module "bangpath" from file
/etc/freeradius3/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius3/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius3/mods-enabled/realm
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius3/radiusd.conf
} # server
server default { # from file /etc/freeradius3/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file
/etc/freeradius3/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius3/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 43572
Listening on proxy address :: port 35996
Ready to process requests
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BlastRADIUS check: Received packet without Proxy-State.
Setting "limit_proxy_state = true" for client localhost
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The packet contains Message-Authenticator.
Please set "require_message_authenticator = true" for client localhost
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(0) Received Access-Request Id 157 from 127.0.0.1:48027 to 127.0.0.1:1812
length 209
(0) Message-Authenticator = 0x659dbdc3e991c58d5c226f625a4c748c
(0) User-Name = "user"
(0) NAS-IP-Address = 127.0.0.1
(0) NAS-Identifier = "24f5a2c3707a"
(0) Called-Station-Id = "24-F5-A2-C3-70-7A:WIFI_LNK_5G"
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) NAS-Port = 1
(0) Calling-Station-Id = "C0-EE-40-45-49-8C"
(0) Connect-Info = "CONNECT 54Mbps 802.11a"
(0) Acct-Session-Id = "E4419CF400A9EE09"
(0) Attr-186 = 0x000fac04
(0) Attr-187 = 0x000fac04
(0) Attr-188 = 0x000fac01
(0) Framed-MTU = 1400
(0) EAP-Message = 0x022200090175736572
(0) # Executing section authorize from file
/etc/freeradius3/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "user", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 34 length 9
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius3/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: (TLS) TLS -Initiating new session
(0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(0) eap: Sending EAP Request (code 1) ID 35 length 10
(0) eap: EAP session adding &reply:State = 0x4b55eb004b76e655
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius3/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) session-state: Saving cached attributes
(0) Framed-MTU = 994
(0) Sent Access-Challenge Id 157 from 127.0.0.1:1812 to 127.0.0.1:48027
length 68
(0) EAP-Message = 0x0123000a0da000000000
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x4b55eb004b76e655eee4e9bbe85f4b29
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 158 from 127.0.0.1:48027 to 127.0.0.1:1812
length 414
(1) Message-Authenticator = 0x78500ad86954d2cc301950da473098dc
(1) User-Name = "user"
(1) NAS-IP-Address = 127.0.0.1
(1) NAS-Identifier = "24f5a2c3707a"
(1) Called-Station-Id = "24-F5-A2-C3-70-7A:WIFI_LNK_5G"
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) NAS-Port = 1
(1) Calling-Station-Id = "C0-EE-40-45-49-8C"
(1) Connect-Info = "CONNECT 54Mbps 802.11a"
(1) Acct-Session-Id = "E4419CF400A9EE09"
(1) Attr-186 = 0x000fac04
(1) Attr-187 = 0x000fac04
(1) Attr-188 = 0x000fac01
(1) Framed-MTU = 1400
(1) EAP-Message =
0x022300c40d0016030100b9010000b503037ff8bf27ad028d8dc8a7cf6ae0b2cd33504f4acfa481bbafc8cb38570005188f000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602
(1) State = 0x4b55eb004b76e655eee4e9bbe85f4b29
(1) Restoring &session-state
(1) &session-state:Framed-MTU = 994
(1) # Executing section authorize from file
/etc/freeradius3/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "user", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 35 length 196
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) [expiration] = noop
(1) [logintime] = noop
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius3/sites-enabled/default
(1) authenticate {
(1) eap: Removing EAP session with state 0x4b55eb004b76e655
(1) eap: Previous EAP request found for state 0x4b55eb004b76e655, released
from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: (TLS) EAP Got final fragment (190 bytes)
(1) eap_tls: WARNING: (TLS) EAP Total received record fragments (190
bytes), does not equal expected expected data length (0 bytes)
(1) eap_tls: (TLS) EAP Done initial handshake
(1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(1) eap_tls: (TLS) TLS - send TLS 1.2 Alert, fatal protocol_version
(1) eap_tls: ERROR: (TLS) TLS - Alert write:fatal:protocol version
(1) eap_tls: ERROR: (TLS) TLS - Server : Error in error
(1) eap_tls: ERROR: (TLS) Failed reading from OpenSSL: error:0A000102:SSL
routines::unsupported protocol
(1) eap_tls: ERROR: (TLS) System call (I/O) error (-1)
(1) eap_tls: ERROR: (TLS) EAP Receive handshake failed during operation
(1) eap_tls: ERROR: [eaptls process] = fail
(1) eap: ERROR: Failed continuing EAP TLS (13) session. EAP sub-module
failed
(1) eap: Sending EAP Failure (code 4) ID 35 length 4
(1) eap: Failed in EAP select
(1) [eap] = invalid
(1) } # authenticate = invalid
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/freeradius3/sites-enabled/default
(1) Post-Auth-Type REJECT {
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject: --> user
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1) [attr_filter.access_reject] = updated
(1) [eap] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 158 from 127.0.0.1:1812 to 127.0.0.1:48027 length
44
(1) EAP-Message = 0x04230004
(1) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 157 with timestamp +21 due to
cleanup_delay was reached
(1) Cleaning up request packet ID 158 with timestamp +21 due to
cleanup_delay was reached
Ready to process requests
(2) Received Access-Request Id 159 from 127.0.0.1:48027 to 127.0.0.1:1812
length 209
(2) Message-Authenticator = 0x6d7d6f56ca4401cd4857be72a6436db9
(2) User-Name = "user"
(2) NAS-IP-Address = 127.0.0.1
(2) NAS-Identifier = "24f5a2c3707a"
(2) Called-Station-Id = "24-F5-A2-C3-70-7A:WIFI_LNK_5G"
(2) NAS-Port-Type = Wireless-802.11
(2) Service-Type = Framed-User
(2) NAS-Port = 1
(2) Calling-Station-Id = "C0-EE-40-45-49-8C"
(2) Connect-Info = "CONNECT 54Mbps 802.11a"
(2) Acct-Session-Id = "E4419CF400A9EE09"
(2) Attr-186 = 0x000fac04
(2) Attr-187 = 0x000fac04
(2) Attr-188 = 0x000fac01
(2) Framed-MTU = 1400
(2) EAP-Message = 0x022000090175736572
(2) # Executing section authorize from file
/etc/freeradius3/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "user", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 32 length 9
(2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius3/sites-enabled/default
(2) authenticate {
(2) eap: Peer sent packet with method EAP Identity (1)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: (TLS) TLS -Initiating new session
(2) eap_tls: (TLS) TLS - Setting verify mode to require certificate from
client
(2) eap: Sending EAP Request (code 1) ID 33 length 10
(2) eap: EAP session adding &reply:State = 0x86e94baf86c846e1
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius3/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2) Framed-MTU = 994
(2) Sent Access-Challenge Id 159 from 127.0.0.1:1812 to 127.0.0.1:48027
length 68
(2) EAP-Message = 0x0121000a0da000000000
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x86e94baf86c846e14e8a49c7486871fe
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 160 from 127.0.0.1:48027 to 127.0.0.1:1812
length 414
(3) Message-Authenticator = 0x96af2f13bddcc7252c5f6a7cbcfa8f81
(3) User-Name = "user"
(3) NAS-IP-Address = 127.0.0.1
(3) NAS-Identifier = "24f5a2c3707a"
(3) Called-Station-Id = "24-F5-A2-C3-70-7A:WIFI_LNK_5G"
(3) NAS-Port-Type = Wireless-802.11
(3) Service-Type = Framed-User
(3) NAS-Port = 1
(3) Calling-Station-Id = "C0-EE-40-45-49-8C"
(3) Connect-Info = "CONNECT 54Mbps 802.11a"
(3) Acct-Session-Id = "E4419CF400A9EE09"
(3) Attr-186 = 0x000fac04
(3) Attr-187 = 0x000fac04
(3) Attr-188 = 0x000fac01
(3) Framed-MTU = 1400
(3) EAP-Message =
0x022100c40d0016030100b9010000b503031990b231f2d54f1648c162a407135d858d74907e42790c4f918ce686acf71276000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602
(3) State = 0x86e94baf86c846e14e8a49c7486871fe
(3) Restoring &session-state
(3) &session-state:Framed-MTU = 994
(3) # Executing section authorize from file
/etc/freeradius3/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "user", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 33 length 196
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3) [eap] = updated
(3) [files] = noop
(3) [expiration] = noop
(3) [logintime] = noop
(3) [pap] = noop
(3) } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius3/sites-enabled/default
(3) authenticate {
(3) eap: Removing EAP session with state 0x86e94baf86c846e1
(3) eap: Previous EAP request found for state 0x86e94baf86c846e1, released
from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: (TLS) EAP Got final fragment (190 bytes)
(3) eap_tls: WARNING: (TLS) EAP Total received record fragments (190
bytes), does not equal expected expected data length (0 bytes)
(3) eap_tls: (TLS) EAP Done initial handshake
(3) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
(3) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(3) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
(3) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
(3) eap_tls: (TLS) TLS - send TLS 1.2 Alert, fatal protocol_version
(3) eap_tls: ERROR: (TLS) TLS - Alert write:fatal:protocol version
(3) eap_tls: ERROR: (TLS) TLS - Server : Error in error
(3) eap_tls: ERROR: (TLS) Failed reading from OpenSSL: error:0A000102:SSL
routines::unsupported protocol
(3) eap_tls: ERROR: (TLS) System call (I/O) error (-1)
(3) eap_tls: ERROR: (TLS) EAP Receive handshake failed during operation
(3) eap_tls: ERROR: [eaptls process] = fail
(3) eap: ERROR: Failed continuing EAP TLS (13) session. EAP sub-module
failed
(3) eap: Sending EAP Failure (code 4) ID 33 length 4
(3) eap: Failed in EAP select
(3) [eap] = invalid
(3) } # authenticate = invalid
(3) Failed to authenticate the user
(3) Using Post-Auth-Type Reject
(3) # Executing group from file /etc/freeradius3/sites-enabled/default
(3) Post-Auth-Type REJECT {
(3) attr_filter.access_reject: EXPAND %{User-Name}
(3) attr_filter.access_reject: --> user
(3) attr_filter.access_reject: Matched entry DEFAULT at line 11
(3) [attr_filter.access_reject] = updated
(3) [eap] = noop
(3) policy remove_reply_message_if_eap {
(3) if (&reply:EAP-Message && &reply:Reply-Message) {
(3) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(3) else {
(3) [noop] = noop
(3) } # else = noop
(3) } # policy remove_reply_message_if_eap = noop
(3) } # Post-Auth-Type REJECT = updated
(3) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(3) Sending delayed response
(3) Sent Access-Reject Id 160 from 127.0.0.1:1812 to 127.0.0.1:48027 length
44
(3) EAP-Message = 0x04210004
(3) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
On Fri, Feb 14, 2025 at 9:02 PM Alan DeKok <aland at deployingradius.com>
wrote:
> On Feb 14, 2025, at 10:19 AM, Akhil Pillai <akhilpillai101 at gmail.com>
> wrote:
> > I have been facing an issue with using tls1.3 in the freeradius.
> > I have been using OpenWrt OS 24.10-rc2 hosted on a linksys router
> 3200acm.
> > I have been using freeradius 3.2.5 and openssl 3.0.15. I am trying to
> > setup a cert based authentication. My client is a linux system. My setup
> > works fine when i set the tls min,max to 1.2 in the eap. Now i wanted to
> > use it with tls1.3 and below is the error message that i am getting at
> the
> > radius server:
> >
> > (2) Finished request
>
> Post the debug output. ALL OF IT. https://wiki.freeradius <
> https://wiki.freeradius/>.org/list-help
>
> You were told to do this on github.
>
> > I did update the eap file tls_min_version and tls_max_version to 1.3
>
> Either the other end doesn't support TLS 1.3, or something else weird is
> going on.
>
> Only the FULL DEBUG OUTPUT will give more information.
>
> Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
More information about the Freeradius-Users
mailing list