LDAP and RFC2868 tagged attributes for Tunnel
Ron Grant
ron at balansoft.com
Mon Feb 24 17:09:55 UTC 2025
I would like to know if anyone has encountered (and solved!) this before.
I am trying to use LDAP Tunnel attributes to establish PPP over L2TP
tunnels from a provider's LAC to our LNS.
This has been working for many years now using freeradius 2.2.6 using
the following syntax in /etc/raddb/ldap.attrmap:
replyItem Tunnel-Type radiusTunnelType +=
replyItem Tunnel-Medium-Type radiusTunnelMediumType +=
replyItem Tunnel-Private-Group-Id radiusTunnelPrivateGroupId +=
replyItem Tunnel-Server-Endpoint radiusTunnelServerEndpoint +=
replyItem Tunnel-Password radiusTunnelPassword +=
replyItem Tunnel-Preference radiusTunnelPreference +=
and the LDAP attributes as follows:
radiustunnelmediumtype: :0:IP
radiustunnelmediumtype: :1:IP
radiustunnelmediumtype: :2:IP
radiustunnelmediumtype: :3:IP
radiustunnelpassword: :0:providersecret
radiustunnelpassword: :1:providersecret
radiustunnelpassword: :2:providersecret
radiustunnelpassword: :3:providersecret
radiustunnelpreference: :0:1
radiustunnelpreference: :1:1
radiustunnelpreference: :2:1
radiustunnelpreference: :3:1
radiustunnelserverendpoint: :0:AA.BB.20.106
radiustunnelserverendpoint: :1:AA.BB.20.114
radiustunnelserverendpoint: :2:CC.DD.80.26
radiustunnelserverendpoint: :3:CC.DD.80.74
radiustunneltype: :0:L2TP
radiustunneltype: :1:L2TP
radiustunneltype: :2:L2TP
radiustunneltype: :3:L2TP
resulting in output like this:
rad_recv: Access-Accept packet from host XX.YY.186.11 port 1812, id=240,
length=547
Tunnel-Preference:0 = 1
Tunnel-Preference:1 = 1
Tunnel-Preference:2 = 1
Tunnel-Preference:3 = 1
Tunnel-Password:0 = "providersecret"
Tunnel-Password:1 = "providersecret"
Tunnel-Password:2 = "providersecret"
Tunnel-Password:3 = "providersecret"
Tunnel-Server-Endpoint:0 = "AA.BB.20.106"
Tunnel-Server-Endpoint:1 = "AA.BB.20.114"
Tunnel-Server-Endpoint:2 = "CC.DD.80.26"
Tunnel-Server-Endpoint:3 = "CC.DD.80.74"
Tunnel-Medium-Type:0 = IPv4
Tunnel-Medium-Type:1 = IPv4
Tunnel-Medium-Type:2 = IPv4
Tunnel-Medium-Type:3 = IPv4
Tunnel-Type:0 = L2TP
Tunnel-Type:1 = L2TP
Tunnel-Type:2 = L2TP
Tunnel-Type:3 = L2TP
However when upgrading these servers to a modern distro (ubuntu 24.04),
and to freeradius 3.2.5, and adding the following lines to the "update"
section of the ldap module:
reply:Tunnel-Type += 'radiusTunnelType'
reply:Tunnel-Medium-Type += 'radiusTunnelMediumType'
reply:Tunnel-Server-Endpoint += 'radiusTunnelServerEndpoint'
reply:Tunnel-Password += 'radiusTunnelPassword'
reply:Tunnel-Preference += 'radiusTunnelPreference'
I get the following reply:
Tunnel-Server-Endpoint:0 = ":0:AA.BB.20.106"
Tunnel-Server-Endpoint:0 = ":1:AA.BB.20.114"
Tunnel-Server-Endpoint:0 = ":2:CC.DD.80.26"
Tunnel-Server-Endpoint:0 = ":3:CC.DD.80.74"
Tunnel-Password:0 = ":0:providersecret"
Tunnel-Password:0 = ":1:providersecret"
Tunnel-Password:0 = ":2:providersecret"
Tunnel-Password:0 = ":3:providersecret"
which is obviously not right - it does not seem to be recognizing the
attributes as ones that need to have a tag pulled out - though curiously
it does remove the colons.
Debug follows, but obviously what I am trying to do is tell freeradius
3.2.5 that these attributes "has_tag".....it obviously knows they SHOULD
have a tag but it's not picking them up.
FreeRADIUS Version 3.2.5
Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/clients.conf
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file
/etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
including configuration file
/etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/always
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/eap
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
proxy_dedup_window = 1
cleanup_delay = 5
max_requests = 16384
max_fds = 512
postauth_client_lost = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = no
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
require_message_authenticator = "auto"
limit_proxy_state = "auto"
}
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
}
client radius2 {
ipaddr = 172.XX.2.12
require_message_authenticator = "true"
secret = <<< secret >>>
limit {
max_connections = 100
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
# Creating Auth-Type = digest
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_null"
server = "dbhost"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = no
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value,
op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value,
op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct a LEFT OUTER
JOIN nasreload n USING (nasipaddress) WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime >
n.reloadtime OR n.reloadtime IS NULL)"
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct a LEFT OUTER JOIN nasreload n USING
(nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference =
"%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
'%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
'%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
}
start {
query = "INSERT INTO radacct (acctsessionid,
acctuniqueid, username, realm, nasipaddress, nasportid,
nasporttype, acctstarttime, acctupdatetime, acctstoptime,
acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, acctterminatecause,
servicetype, framedprotocol, framedipaddress,
framedipv6address, framedipv6prefix, framedinterfaceid,
delegatedipv6prefix ) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
'%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
'%{Delegated-IPv6-Prefix}' )"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval =
%{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', framedipv6address =
'%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
'%{Delegated-IPv6-Prefix}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( '%{SQL-User-Name}',
'%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' )"
}
}
rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_detail
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_exec
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile =
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "localhost"
identity = "cn=radiusmanager,dc=redacteddomain,dc=com"
password = <<< secret >>>
sasl {
}
user_dn = "LDAP-UserDn"
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
allow_dangling_group_ref = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "dc=redacteddomain,dc=com"
}
profile {
attribute = "radiusProfileDn"
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
cipher_list = "DEFAULT"
check_crl = no
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_sqlippool
# Loading module "sqlippool" from file
/etc/freeradius/3.0/mods-enabled/sqlippool
sqlippool {
sql_module_instance = "sql"
lease_duration = 86400
pool_name = "Pool-Name"
attribute_name = "Framed-IP-Address"
req_attribute_name = "Framed-IP-Address"
allocate_begin = "START TRANSACTION"
allocate_clear = ""
allocate_clear_timeout = 1
allocate_existing = "SELECT framedipaddress FROM radippool WHERE
pool_name = '%{control:Pool-Name}' AND nasipaddress =
'%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' ORDER BY expiry_time
DESC LIMIT 1 FOR UPDATE "
allocate_requested = ""
allocate_find = "SELECT framedipaddress FROM radippool WHERE
pool_name = '%{control:Pool-Name}' AND expiry_time < NOW() ORDER BY
expiry_time LIMIT 1 FOR UPDATE "
allocate_update = "UPDATE radippool SET nasipaddress =
'%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
'%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW()
+ INTERVAL 86400 SECOND WHERE framedipaddress = '%I'"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippool WHERE
pool_name='%{control:Pool-Name}' LIMIT 1"
start_update = "UPDATE radippool SET expiry_time = NOW() +
INTERVAL 86400 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND
pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND
callingstationid = '%{Calling-Station-Id}' AND framedipaddress =
'%{Framed-IP-Address}'"
alive_update = "UPDATE radippool SET expiry_time = NOW() +
INTERVAL 86400 SECOND WHERE nasipaddress =
'%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
AND username = '%{User-Name}' AND callingstationid =
'%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
stop_clear = "UPDATE radippool SET expiry_time = NOW() WHERE
nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key
= '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid =
'%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
on_clear = "UPDATE radippool SET expiry_time = NOW() WHERE
nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
off_clear = "UPDATE radippool SET expiry_time = NOW() WHERE
nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did
%{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from
%{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id}
port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{request:Framed-IP-Address} (did
%{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did
%{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli
%{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
max_eap_type = 52
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
dedup_key = ""
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
instantiate {
}
# Instantiating module "sql" from file
/etc/freeradius/3.0/mods-enabled/sql
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
max_retries = 5
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "ldap" from file
/etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20607
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! libldap is using GnuTLS, while FreeRADIUS is using OpenSSL
!! There may be random issues with TLS connections due to this conflict.
!! The server may also crash.
!! See https://wiki.freeradius.org/modules/Rlm_ldap for more information.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
max_retries = 5
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "sqlippool" from file
/etc/freeradius/3.0/mods-enabled/sqlippool
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
# Loading authorize {...}
# Loading session {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Ready to process requests
(0) Received Access-Request Id 218 from 172.XX.2.12:53346 to
172.XX.2.11:1812 length 93
(0) Message-Authenticator = 0x0e0ef84ae5e7e16d5f4da0bedfeb5968
(0) User-Name = "testprog2 at redacteddomain.com"
(0) User-Password = "seekrit"
(0) NAS-IP-Address = 172.XX.2.12
(0) NAS-Port = 0
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) auth_log: EXPAND
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(0) auth_log: -->
/var/log/freeradius/radacct/172.XX.2.12/auth-detail-20250224
(0) auth_log:
/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
expands to /var/log/freeradius/radacct/172.XX.2.12/auth-detail-20250224
(0) auth_log: EXPAND %t
(0) auth_log: --> Mon Feb 24 16:59:22 2025
(0) [auth_log] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "redacteddomain.com" for User-Name =
"testprog2 at redacteddomain.com"
(0) suffix: No such realm "redacteddomain.com"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
rlm_ldap (ldap): Reserved connection (0)
(0) ldap: EXPAND
(&(objectclass=radiusprofile)(uid=%{%{Stripped-User-Name}:-%{User-Name}}))
(0) ldap: -->
(&(objectclass=radiusprofile)(uid=testprog2 at redacteddomain.com))
(0) ldap: Performing search in "dc=redacteddomain,dc=com" with filter
"(&(objectclass=radiusprofile)(uid=testprog2 at redacteddomain.com))",
scope "sub"
(0) ldap: Waiting for search result...
(0) ldap: User object found at DN
"cn=testprog2 at redacteddomain.com,ou=people,dc=redacteddomain,dc=com"
(0) ldap: Performing search in
"cn=BalancedPublic,ou=profiles,dc=redacteddomain,dc=com" with filter
"(objectclass=radiusprofile)", scope "base"
(0) ldap: Waiting for search result...
(0) ldap: Processing profile attributes
(0) ldap: control:Simultaneous-Use := 1
(0) ldap: reply:Service-Type := Framed-User
(0) ldap: reply:Idle-Timeout := 0
(0) ldap: reply:Session-Timeout := 0
(0) ldap: reply:Framed-Protocol := PPP
(0) ldap: WARNING: Failed parsing value ":0:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":0:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":1:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":1:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":2:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":2:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":3:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":3:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":4:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":4:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":5:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":5:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":6:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":6:L2TP" for attribute Tunnel-Type
(0) ldap: WARNING: Failed parsing value ":7:L2TP" for attribute
Tunnel-Type: Unknown or invalid value ":7:L2TP" for attribute Tunnel-Type
(0) ldap: No attributes updated for RHS radiusTunnelType
(0) ldap: WARNING: Failed parsing value ":0:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":0:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":1:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":1:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":2:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":2:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":3:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":3:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":4:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":4:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":5:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":5:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":6:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":6:IP" for attribute
Tunnel-Medium-Type
(0) ldap: WARNING: Failed parsing value ":7:IP" for attribute
Tunnel-Medium-Type: Unknown or invalid value ":7:IP" for attribute
Tunnel-Medium-Type
(0) ldap: No attributes updated for RHS radiusTunnelMediumType
(0) ldap: reply:Tunnel-Server-Endpoint += ':0:AA.BB.20.106'
(0) ldap: reply:Tunnel-Server-Endpoint += ':1:AA.BB.20.114'
(0) ldap: reply:Tunnel-Server-Endpoint += ':2:CC.DD.80.26'
(0) ldap: reply:Tunnel-Server-Endpoint += ':3:CC.DD.80.74'
(0) ldap: reply:Tunnel-Server-Endpoint += ':4:AA.BB.20.107'
(0) ldap: reply:Tunnel-Server-Endpoint += ':5:AA.BB.20.115'
(0) ldap: reply:Tunnel-Server-Endpoint += ':6:CC.DD.80.27'
(0) ldap: reply:Tunnel-Server-Endpoint += ':7:CC.DD.80.75'
(0) ldap: reply:Tunnel-Password += ':0:providersecret'
(0) ldap: reply:Tunnel-Password += ':1:providersecret'
(0) ldap: reply:Tunnel-Password += ':2:providersecret'
(0) ldap: reply:Tunnel-Password += ':3:providersecret'
(0) ldap: reply:Tunnel-Password += ':4:providersecret'
(0) ldap: reply:Tunnel-Password += ':5:providersecret'
(0) ldap: reply:Tunnel-Password += ':6:providersecret'
(0) ldap: reply:Tunnel-Password += ':7:providersecret'
(0) ldap: WARNING: Failed parsing value ":0:1" for attribute
Tunnel-Preference: Unknown or invalid value ":0:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":1:1" for attribute
Tunnel-Preference: Unknown or invalid value ":1:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":2:1" for attribute
Tunnel-Preference: Unknown or invalid value ":2:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":3:1" for attribute
Tunnel-Preference: Unknown or invalid value ":3:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":4:1" for attribute
Tunnel-Preference: Unknown or invalid value ":4:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":5:1" for attribute
Tunnel-Preference: Unknown or invalid value ":5:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":6:1" for attribute
Tunnel-Preference: Unknown or invalid value ":6:1" for attribute
Tunnel-Preference
(0) ldap: WARNING: Failed parsing value ":7:1" for attribute
Tunnel-Preference: Unknown or invalid value ":7:1" for attribute
Tunnel-Preference
(0) ldap: No attributes updated for RHS radiusTunnelPreference
(0) ldap: reply::Cisco-AVPair = 'ip:dns-servers=208.67.222.222
208.67.220.220'
(0) ldap: Processing user attributes
(0) ldap: control:Password-With-Header += 'seekrit'
(0) ldap: reply:Framed-IP-Netmask := 255.255.255.255
(0) ldap: reply:Framed-IP-Address := EE.FF.180.1
rlm_ldap (ldap): Released connection (0)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(0) [ldap] = updated
(0) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password
(0) pap: Removing &control:Password-With-Header
(0) [pap] = updated
(0) } # authorize = updated
(0) Found Auth-Type = PAP
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Auth-Type PAP {
(0) pap: Login attempt with password
(0) pap: Comparing with "known good" Cleartext-Password
(0) pap: User authenticated successfully
(0) [pap] = ok
(0) } # Auth-Type PAP = ok
(0) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(0) post-auth {
(0) if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) {
(0) if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE
(0) update {
(0) No attributes updated for RHS &session-state:
(0) } # update = noop
(0) sqlippool: Framed-IP-Address already exists
(0) sqlippool: EXPAND Existing IP: %{reply:Framed-IP-Address} (did
%{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
%{User-Name})
(0) sqlippool: --> Existing IP: EE.FF.180.1 (did cli port 0 user
testprog2 at redacteddomain.com)
(0) [sqlippool] = noop
(0) sql: EXPAND .query
(0) sql: --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (0)
(0) sql: EXPAND %{User-Name}
(0) sql: --> testprog2 at redacteddomain.com
(0) sql: SQL-User-Name set to 'testprog2 at redacteddomain.com'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate
) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate
) VALUES ( 'testprog2 at redacteddomain.com', 'seekrit', 'Access-Accept',
'2025-02-24 16:59:22.395281' )
(0) sql: Executing query: INSERT INTO radpostauth (username, pass,
reply, authdate ) VALUES ( 'testprog2 at redacteddomain.com', 'seekrit',
'Access-Accept', '2025-02-24 16:59:22.395281' )
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
(0) [sql] = ok
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) if (EAP-Key-Name && &reply:EAP-Session-Id) {
(0) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE
(0) } # post-auth = ok
(0) Login OK: [testprog2 at redacteddomain.com/seekrit] (from client
radius2 port 0)
(0) Sent Access-Accept Id 218 from 172.XX.2.11:1812 to 172.XX.2.12:53346
length 438
(0) Service-Type := Framed-User
(0) Idle-Timeout := 0
(0) Session-Timeout := 0
(0) Framed-Protocol := PPP
(0) Tunnel-Server-Endpoint += ":0:AA.BB.20.106"
(0) Tunnel-Server-Endpoint += ":1:AA.BB.20.114"
(0) Tunnel-Server-Endpoint += ":2:CC.DD.80.26"
(0) Tunnel-Server-Endpoint += ":3:CC.DD.80.74"
(0) Tunnel-Server-Endpoint += ":4:AA.BB.20.107"
(0) Tunnel-Server-Endpoint += ":5:AA.BB.20.115"
(0) Tunnel-Server-Endpoint += ":6:CC.DD.80.27"
(0) Tunnel-Server-Endpoint += ":7:CC.DD.80.75"
(0) Tunnel-Password += ":0:providersecret"
(0) Tunnel-Password += ":1:providersecret"
(0) Tunnel-Password += ":2:providersecret"
(0) Tunnel-Password += ":3:providersecret"
(0) Tunnel-Password += ":4:providersecret"
(0) Tunnel-Password += ":5:providersecret"
(0) Tunnel-Password += ":6:providersecret"
(0) Tunnel-Password += ":7:providersecret"
(0) Cisco-AVPair = "ip:dns-servers=208.67.222.222 208.67.220.220"
(0) Framed-IP-Netmask := 255.255.255.255
(0) Framed-IP-Address := EE.FF.180.1
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 218 with timestamp +6 due to
cleanup_delay was reached
Ready to process requests
--
Ron Grant
Balan Software/Networks
Network Architecture & Programming
604-737-2113
ca.linkedin.com/in/obiron
More information about the Freeradius-Users
mailing list