LDAP and RFC2868 tagged attributes for Tunnel

Ron Grant ron at balansoft.com
Fri Feb 28 06:29:56 UTC 2025


yay!

Received Access-Accept Id 178 from 172.XX.2.123:1812 to 
172.XX.2.12:40997 length 565
     Message-Authenticator = 0x9357a0fa59269abbe5e5ba4bc09c80c2
     Service-Type = Framed-User
     Idle-Timeout = 0
     Session-Timeout = 0
     Framed-Protocol = PPP
     Tunnel-Type:0 = L2TP
     Tunnel-Type:1 = L2TP
     Tunnel-Type:2 = L2TP
     Tunnel-Type:3 = L2TP
     Tunnel-Type:4 = L2TP
     Tunnel-Type:5 = L2TP
     Tunnel-Type:6 = L2TP
     Tunnel-Type:7 = L2TP
     Tunnel-Medium-Type:0 = IPv4
     Tunnel-Medium-Type:1 = IPv4
     Tunnel-Medium-Type:2 = IPv4
     Tunnel-Medium-Type:3 = IPv4
     Tunnel-Medium-Type:4 = IPv4
     Tunnel-Medium-Type:5 = IPv4
     Tunnel-Medium-Type:6 = IPv4
     Tunnel-Medium-Type:7 = IPv4
     Tunnel-Server-Endpoint:0 = "AA.BB.20.106"
     Tunnel-Server-Endpoint:1 = "AA.BB.20.114"
     Tunnel-Server-Endpoint:2 = "CC.DD.80.26"
     Tunnel-Server-Endpoint:3 = "CC.DD.80.74"
     Tunnel-Server-Endpoint:4 = "AA.BB.20.107"
     Tunnel-Server-Endpoint:5 = "AA.BB.20.115"
     Tunnel-Server-Endpoint:6 = "CC.DD.80.27"
     Tunnel-Server-Endpoint:7 = "CC.DD.80.75"
     Tunnel-Password:0 = "providersecret"
     Tunnel-Password:1 = "providersecret"
     Tunnel-Password:2 = "providersecret"
     Tunnel-Password:3 = "providersecret"
     Tunnel-Password:4 = "providersecret"
     Tunnel-Password:5 = "providersecret"
     Tunnel-Password:6 = "providersecret"
     Tunnel-Password:7 = "providersecret"
     Tunnel-Preference:0 = 1
     Tunnel-Preference:1 = 1
     Tunnel-Preference:2 = 1
     Tunnel-Preference:3 = 1
     Tunnel-Preference:4 = 1
     Tunnel-Preference:5 = 1
     Tunnel-Preference:6 = 1
     Tunnel-Preference:7 = 1
     Cisco-AVPair = "ip:dns-servers=208.67.222.222 208.67.220.220"
     Framed-IP-Netmask = 255.255.255.255
     Framed-IP-Address = EE.FF.180.1



On 2025-02-25 12:24 p.m., Alan DeKok wrote:
> On Feb 25, 2025, at 3:08 PM, Ron Grant <ron at balansoft.com> wrote:
>> Was this devel package supposed to include Alan's changes?
>> ...
>> Installed as per instructions but still not working.
>>
>> /etc/freeradius/mods-enabled/ldap[144]: Failed parsing attribute reference
>> /etc/freeradius/mods-enabled/ldap[144]: reply:Tunnel-Type:V
>> /etc/freeradius/mods-enabled/ldap[144]:                   ^ Unexpected text after attr
>> /etc/freeradius/mods-enabled/ldap[8]: Instantiation failed for module "ldap"
>    I pushed some more changes earlier today.  We'll have to rebuild the packages.
>
>    Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-- 
Ron Grant
Balan Software/Networks
Network Architecture & Programming
604-737-2113

ca.linkedin.com/in/obiron



More information about the Freeradius-Users mailing list