freeradius 3.2.1 on debian 12.9 + LDAP
Dariusz Bloch
dariusz.bloch at telbridge.pl
Fri Mar 7 11:50:08 UTC 2025
Hello.
I've got LDAP users, with Samba passwords(amongst other attributes) as
sambaNTPassword
<http://ldap.telbridge/ldapadmin/cmd.php?cmd=schema&server_id=1&view=attributes&viewvalue=sambantpassword>,
and try to authenticate users (windows10,11) to access LAN through
AccessPoint(192.168.176.5) using those passwords since radius and ldap
do not work good together. According to table, windows default mschap(or
mschapv2) works only with ntlm_auth(obviously i dont want do store
passwords as cleartext in ldap) so im trying to use samba pass as those
are stored as some hashes. I should mention that my config work if
passwords in ldap are cleartext, if any other storage method -
authentication fail. For testing I use snakeoil certs by making them
after installation. Config files are mostly in default. Ldap on remote
host(some centos).
Could anybody check my debug below with any suggestions with fixes?
FreeRADIUS Version 3.2.1
Copyright (C) 1999-2022 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file
/etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
postauth_client_lost = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
recv_coa {
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client ldap {
ipaddr = 192.168.84.44
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_detail
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "ldap.telbridge"
identity = "cn=Manager,o=Telbridge"
password = <<< secret >>>
sasl {
}
user_dn = "LDAP-UserDn"
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
cacheable_name = no
cacheable_dn = no
allow_dangling_group_ref = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "ou=People,o=Telbridge"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --allow-mschapv2
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}"
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "raddb"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value,
op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value,
op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct a LEFT OUTER
JOIN nasreload n USING (nasipaddress) WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime >
n.reloadtime OR n.reloadtime IS NULL)"
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct a LEFT OUTER JOIN nasreload n USING
(nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference =
"%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
'%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
'%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
}
start {
query = "INSERT INTO radacct (acctsessionid,
acctuniqueid, username, realm, nasipaddress, nasportid,
nasporttype, acctstarttime, acctupdatetime, acctstoptime,
acctsessiontime, acctauthentic, connectinfo_start,
connectinfo_stop, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, acctterminatecause,
servicetype, framedprotocol, framedipaddress,
framedipv6address, framedipv6prefix, framedinterfaceid,
delegatedipv6prefix ) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
'%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
'%{Delegated-IPv6-Prefix}' )"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval =
%{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', framedipv6address =
'%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
'%{Delegated-IPv6-Prefix}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( '%{SQL-User-Name}',
'%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' )"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key
--domain=telbridge --username=%{mschap:User-Name}
--password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile =
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
instantiate {
}
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "bangpath" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "ldap" from file
/etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20513
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "sql" from file
/etc/freeradius/3.0/mods-enabled/sql
rlm_sql_mysql: libmysql version: 3.3.8
mysql {
tls {
tls_required = no
check_cert = no
check_cert_cn = no
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "raddb"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
type, secret, server FROM nas
rlm_sql (sql): Adding client 192.168.176.5 (AP_pow3) to global clients list
rlm_sql (192.168.176.5): Client "AP_pow3" (sql) added
rlm_sql (sql): Adding client 192.168.176.20 (komp) to global clients list
rlm_sql (192.168.176.20): Client "komp" (sql) added
rlm_sql (sql): Adding client 192.168.117.244 (telbsw11t) to global
clients list
rlm_sql (192.168.117.244): Client "telbsw11t" (sql) added
rlm_sql (sql): Adding client 192.168.198.79 () to global clients list
rlm_sql (192.168.198.79): Client "" (sql) added
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
# Loading authorize {...}
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:336
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 33535
Ready to process requests
(0) Received Access-Request Id 108 from 192.168.176.5:32790 to
192.168.183.8:1812 length 170
(0) User-Name = "dbloch3"
(0) NAS-IP-Address = 192.168.176.5
(0) NAS-Identifier = "hello"
(0) NAS-Port = 0
(0) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(0) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(0) Framed-MTU = 1400
(0) NAS-Port-Type = Wireless-802.11
(0) Connect-Info = "CONNECT 0Mbps 802.11b"
(0) EAP-Message = 0x0201000c0164626c6f636833
(0) Message-Authenticator = 0x33dc36905d03ab6773cecbc7efe87481
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 1 length 12
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 2 length 22
(0) eap: EAP session adding &reply:State = 0x902f42bb902d4696
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 108 from 192.168.183.8:1812 to
192.168.176.5:32790 length 80
(0) EAP-Message = 0x010200160410dcec145a04fb26a764c8fa0e3c07d9ce
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x902f42bb902d4696ae439ed8c346540f
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 109 from 192.168.176.5:32790 to
192.168.183.8:1812 length 183
(1) User-Name = "dbloch3"
(1) NAS-IP-Address = 192.168.176.5
(1) NAS-Identifier = "hello"
(1) NAS-Port = 0
(1) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(1) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(1) Framed-MTU = 1400
(1) NAS-Port-Type = Wireless-802.11
(1) Connect-Info = "CONNECT 0Mbps 802.11b"
(1) EAP-Message = 0x02020007031915
(1) State = 0x902f42bb902d4696ae439ed8c346540f
(1) Message-Authenticator = 0xdf5057c3144f5e83d41e40a2f8fbda0e
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 7
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
(1) sql: EXPAND %{User-Name}
(1) sql: --> dbloch3
(1) sql: SQL-User-Name set to 'dbloch3'
rlm_sql (sql): Reserved connection (1)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'dbloch3' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value,
op FROM radcheck WHERE username = 'dbloch3' ORDER BY id
(1) sql: WARNING: User not found in radcheck table.
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username =
'dbloch3' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup
WHERE username = 'dbloch3' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (1)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
(1) [sql] = notfound
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (uid=dbloch3)
(1) ldap: Performing search in "ou=People,o=Telbridge" with filter
"(uid=dbloch3)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN "uid=dbloch3,ou=People,o=Telbridge"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header +=
'{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF'
(1) ldap: control:Cleartext-Password +=
'{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF'
rlm_ldap (ldap): Released connection (0)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1) [ldap] = updated
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: Config already contains a "known good" password
(&control:Cleartext-Password). Ignoring &control:Password-With-Header
(1) pap: WARNING: Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x902f42bb902d4696
(1) eap: Finished EAP session with state 0x902f42bb902d4696
(1) eap: Previous EAP request found for state 0x902f42bb902d4696,
released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: (TLS) Initiating new session
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x902f42bb912c5b96
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) session-state: Saving cached attributes
(1) Framed-MTU = 994
(1) Sent Access-Challenge Id 109 from 192.168.183.8:1812 to
192.168.176.5:32790 length 64
(1) EAP-Message = 0x010300061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x902f42bb912c5b96ae439ed8c346540f
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 110 from 192.168.176.5:32790 to
192.168.183.8:1812 length 615
(2) User-Name = "dbloch3"
(2) NAS-IP-Address = 192.168.176.5
(2) NAS-Identifier = "hello"
(2) NAS-Port = 0
(2) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(2) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(2) Framed-MTU = 1400
(2) NAS-Port-Type = Wireless-802.11
(2) Connect-Info = "CONNECT 0Mbps 802.11b"
(2) EAP-Message =
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
(2) State = 0x902f42bb912c5b96ae439ed8c346540f
(2) Message-Authenticator = 0x2bb2ce558544e7da3d334cf3271c45d2
(2) Restoring &session-state
(2) &session-state:Framed-MTU = 994
(2) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 437
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x902f42bb912c5b96
(2) eap: Finished EAP session with state 0x902f42bb912c5b96
(2) eap: Previous EAP request found for state 0x902f42bb912c5b96,
released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: (TLS) EAP Peer says that the final record size will be 427
bytes
(2) eap_peap: (TLS) EAP Got all data (427 bytes)
(2) eap_peap: (TLS) Handshake state - before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) Handshake state - Server before SSL initialization
(2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello
(2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange
(2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone
(2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write
server done
(2) eap_peap: (TLS) In Handshake Phase
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x902f42bb922b5b96
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) session-state: Saving cached attributes
(2) Framed-MTU = 994
(2) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(2) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(2) Sent Access-Challenge Id 110 from 192.168.183.8:1812 to
192.168.176.5:32790 length 1068
(2) EAP-Message =
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
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x902f42bb922b5b96ae439ed8c346540f
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 111 from 192.168.176.5:32790 to
192.168.183.8:1812 length 182
(3) User-Name = "dbloch3"
(3) NAS-IP-Address = 192.168.176.5
(3) NAS-Identifier = "hello"
(3) NAS-Port = 0
(3) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(3) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(3) Framed-MTU = 1400
(3) NAS-Port-Type = Wireless-802.11
(3) Connect-Info = "CONNECT 0Mbps 802.11b"
(3) EAP-Message = 0x020400061900
(3) State = 0x902f42bb922b5b96ae439ed8c346540f
(3) Message-Authenticator = 0x71f19e580328e6ceb85927dc5da7ce07
(3) Restoring &session-state
(3) &session-state:Framed-MTU = 994
(3) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(3) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(3) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x902f42bb922b5b96
(3) eap: Finished EAP session with state 0x902f42bb922b5b96
(3) eap: Previous EAP request found for state 0x902f42bb922b5b96,
released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: (TLS) Peer ACKed our handshake fragment
(3) eap: Sending EAP Request (code 1) ID 5 length 210
(3) eap: EAP session adding &reply:State = 0x902f42bb932a5b96
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) session-state: Saving cached attributes
(3) Framed-MTU = 994
(3) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(3) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(3) Sent Access-Challenge Id 111 from 192.168.183.8:1812 to
192.168.176.5:32790 length 268
(3) EAP-Message =
0x010500d21900e0f4ca0bb5a5f3d95077c05847819f52e2fca7236306b0958d583e841cd47cf80f602b0690db40626a25e8e25caa9d0e51aa159d05e993460ee57d19c3a2f500bb35d1bf167f7125cb3200af5b0001d3c4803fe488fdf192686f94b376165843d62bcee496c5c2ccd8858a419c4fb1c499c3528076bf33289ecf6db9d866f244b303099683d54d8c4e1638d051f2e5cf7a86c03ccf60ed49b35a22ed64411adf11da9749409c1567c47a0f33df540a8cabfc0296bb37c4a738386861b299bdaa7cf4f516030300040e000000
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x902f42bb932a5b96ae439ed8c346540f
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 112 from 192.168.176.5:32790 to
192.168.183.8:1812 length 279
(4) User-Name = "dbloch3"
(4) NAS-IP-Address = 192.168.176.5
(4) NAS-Identifier = "hello"
(4) NAS-Port = 0
(4) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(4) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(4) Framed-MTU = 1400
(4) NAS-Port-Type = Wireless-802.11
(4) Connect-Info = "CONNECT 0Mbps 802.11b"
(4) EAP-Message =
0x0205006719800000005d160303002510000021206db0fc165e768e171195d7e481047ac3d72e7f19850eedc0fcdbefbea5d0576c14030300010116030300280000000000000000c900a4bb1d3a1f410d3806b65db302d46f2c3abebaf614f448cb392f11fed095
(4) State = 0x902f42bb932a5b96ae439ed8c346540f
(4) Message-Authenticator = 0x0d15e19b79a02ecb2876d58f1b742340
(4) Restoring &session-state
(4) &session-state:Framed-MTU = 994
(4) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(4) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(4) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 103
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x902f42bb932a5b96
(4) eap: Finished EAP session with state 0x902f42bb932a5b96
(4) eap: Previous EAP request found for state 0x902f42bb932a5b96,
released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: (TLS) EAP Peer says that the final record size will be 93
bytes
(4) eap_peap: (TLS) EAP Got all data (93 bytes)
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key
exchange
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change
cipher spec
(4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished
(4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change
cipher spec
(4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished
(4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished
(4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully
(4) eap_peap: (TLS) Connection Established
(4) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) eap_peap: TLS-Session-Version = "TLS 1.2"
(4) eap: Sending EAP Request (code 1) ID 6 length 57
(4) eap: EAP session adding &reply:State = 0x902f42bb94295b96
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) session-state: Saving cached attributes
(4) Framed-MTU = 994
(4) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(4) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(4) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(4) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(4) TLS-Session-Version = "TLS 1.2"
(4) Sent Access-Challenge Id 112 from 192.168.183.8:1812 to
192.168.176.5:32790 length 115
(4) EAP-Message =
0x0106003919001403030001011603030028a9bbdc6cd36d3d3235e2ded7f05d1998f1f0662232fae63293fe5189979e35908edb6ccc2547d6a9
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x902f42bb94295b96ae439ed8c346540f
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 113 from 192.168.176.5:32790 to
192.168.183.8:1812 length 182
(5) User-Name = "dbloch3"
(5) NAS-IP-Address = 192.168.176.5
(5) NAS-Identifier = "hello"
(5) NAS-Port = 0
(5) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(5) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(5) Framed-MTU = 1400
(5) NAS-Port-Type = Wireless-802.11
(5) Connect-Info = "CONNECT 0Mbps 802.11b"
(5) EAP-Message = 0x020600061900
(5) State = 0x902f42bb94295b96ae439ed8c346540f
(5) Message-Authenticator = 0xd9053685a28d03ed41cb3e7e68f01411
(5) Restoring &session-state
(5) &session-state:Framed-MTU = 994
(5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(5) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(5) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(5) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(5) &session-state:TLS-Session-Version = "TLS 1.2"
(5) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x902f42bb94295b96
(5) eap: Finished EAP session with state 0x902f42bb94295b96
(5) eap: Previous EAP request found for state 0x902f42bb94295b96,
released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: (TLS) Peer ACKed our handshake fragment. handshake is
finished
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 7 length 40
(5) eap: EAP session adding &reply:State = 0x902f42bb95285b96
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) session-state: Saving cached attributes
(5) Framed-MTU = 994
(5) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(5) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(5) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(5) TLS-Session-Version = "TLS 1.2"
(5) Sent Access-Challenge Id 113 from 192.168.183.8:1812 to
192.168.176.5:32790 length 98
(5) EAP-Message =
0x010700281900170303001da9bbdc6cd36d3d336259b6beac4a5ed29ab7778ed390106d78efe4d750
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x902f42bb95285b96ae439ed8c346540f
(5) Finished request
Waking up in 4.0 seconds.
(6) Received Access-Request Id 114 from 192.168.176.5:32790 to
192.168.183.8:1812 length 219
(6) User-Name = "dbloch3"
(6) NAS-IP-Address = 192.168.176.5
(6) NAS-Identifier = "hello"
(6) NAS-Port = 0
(6) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(6) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(6) Framed-MTU = 1400
(6) NAS-Port-Type = Wireless-802.11
(6) Connect-Info = "CONNECT 0Mbps 802.11b"
(6) EAP-Message =
0x0207002b1900170303002000000000000000019bd749baa9d1a95aa0e9ad07337a07a8e0f2cb6e200e1d1e
(6) State = 0x902f42bb95285b96ae439ed8c346540f
(6) Message-Authenticator = 0xc7f3e4ccc55a0b7e00014657eed35781
(6) Restoring &session-state
(6) &session-state:Framed-MTU = 994
(6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(6) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(6) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(6) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(6) &session-state:TLS-Session-Version = "TLS 1.2"
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 43
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x902f42bb95285b96
(6) eap: Finished EAP session with state 0x902f42bb95285b96
(6) eap: Previous EAP request found for state 0x902f42bb95285b96,
released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: (TLS) EAP Done initial handshake
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - dbloch3
(6) eap_peap: Got inner identity 'dbloch3'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x0207000c0164626c6f636833
(6) eap_peap: Setting User-Name to dbloch3
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x0207000c0164626c6f636833
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "dbloch3"
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x0207000c0164626c6f636833
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "dbloch3"
(6) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 12
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 42
(6) eap: EAP session adding &reply:State = 0x90d0904890d88a80
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message =
0x0108002a1a01080025102fe7b624d83d85a542220de546910283667265657261646975732d332e322e31
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x90d0904890d88a8096b00a40119aa09b
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message =
0x0108002a1a01080025102fe7b624d83d85a542220de546910283667265657261646975732d332e322e31
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0x90d0904890d88a8096b00a40119aa09b
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message =
0x0108002a1a01080025102fe7b624d83d85a542220de546910283667265657261646975732d332e322e31
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0x90d0904890d88a8096b00a40119aa09b
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 73
(6) eap: EAP session adding &reply:State = 0x902f42bb96275b96
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) session-state: Saving cached attributes
(6) Framed-MTU = 994
(6) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(6) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(6) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(6) TLS-Session-Version = "TLS 1.2"
(6) Sent Access-Challenge Id 114 from 192.168.183.8:1812 to
192.168.176.5:32790 length 131
(6) EAP-Message =
0x010800491900170303003ea9bbdc6cd36d3d34fcc3db8cea4325f743f5154fe928be49ea6171cdcf7e889a16410b23a1e76f00548c4def37ac909ab4cbbb900e58001bb0f752907697
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x902f42bb96275b96ae439ed8c346540f
(6) Finished request
Waking up in 4.0 seconds.
(7) Received Access-Request Id 115 from 192.168.176.5:32790 to
192.168.183.8:1812 length 273
(7) User-Name = "dbloch3"
(7) NAS-IP-Address = 192.168.176.5
(7) NAS-Identifier = "hello"
(7) NAS-Port = 0
(7) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(7) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(7) Framed-MTU = 1400
(7) NAS-Port-Type = Wireless-802.11
(7) Connect-Info = "CONNECT 0Mbps 802.11b"
(7) EAP-Message =
0x02080061190017030300560000000000000002df3dc96387a64877d27aefd87b870b139cc7eb4eff838df797931d746bfa4faacb1f0be4237e40c72a4d7a0e054da3760908338169c32d8fe2c9f20a7280cc3e23538ae04af21dbce766deac9557
(7) State = 0x902f42bb96275b96ae439ed8c346540f
(7) Message-Authenticator = 0x5e0249abb1f5c83212e741f35bc92a66
(7) Restoring &session-state
(7) &session-state:Framed-MTU = 994
(7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(7) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(7) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(7) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(7) &session-state:TLS-Session-Version = "TLS 1.2"
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 97
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x90d0904890d88a80
(7) eap: Finished EAP session with state 0x902f42bb96275b96
(7) eap: Previous EAP request found for state 0x902f42bb96275b96,
released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: (TLS) EAP Done initial handshake
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message =
0x020800421a0208003d31e25fe1a18ed2e1badd11b51f6342b8cc000000000000000007a49c0565f4376624d86213c14b8445240d90a5ffd7ab780064626c6f636833
(7) eap_peap: Setting User-Name to dbloch3
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message =
0x020800421a0208003d31e25fe1a18ed2e1badd11b51f6342b8cc000000000000000007a49c0565f4376624d86213c14b8445240d90a5ffd7ab780064626c6f636833
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "dbloch3"
(7) eap_peap: State = 0x90d0904890d88a8096b00a40119aa09b
(7) Virtual server inner-tunnel received request
(7) EAP-Message =
0x020800421a0208003d31e25fe1a18ed2e1badd11b51f6342b8cc000000000000000007a49c0565f4376624d86213c14b8445240d90a5ffd7ab780064626c6f636833
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "dbloch3"
(7) State = 0x90d0904890d88a8096b00a40119aa09b
(7) WARNING: Outer and inner identities are the same. User privacy is
compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~
/@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 66
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
(7) sql: EXPAND %{User-Name}
(7) sql: --> dbloch3
(7) sql: SQL-User-Name set to 'dbloch3'
rlm_sql (sql): Reserved connection (2)
(7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(7) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'dbloch3' ORDER BY id
(7) sql: Executing select query: SELECT id, username, attribute, value,
op FROM radcheck WHERE username = 'dbloch3' ORDER BY id
(7) sql: WARNING: User not found in radcheck table.
(7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(7) sql: --> SELECT groupname FROM radusergroup WHERE username =
'dbloch3' ORDER BY priority
(7) sql: Executing select query: SELECT groupname FROM radusergroup
WHERE username = 'dbloch3' ORDER BY priority
(7) sql: User not found in any groups
rlm_sql (sql): Released connection (2)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
(7) [sql] = notfound
rlm_ldap (ldap): Reserved connection (1)
(7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap: --> (uid=dbloch3)
(7) ldap: Performing search in "ou=People,o=Telbridge" with filter
"(uid=dbloch3)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN "uid=dbloch3,ou=People,o=Telbridge"
(7) ldap: Processing user attributes
(7) ldap: control:Password-With-Header +=
'{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF'
(7) ldap: control:Cleartext-Password +=
'{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF'
rlm_ldap (ldap): Released connection (1)
Need more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending
slots used
rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) [ldap] = updated
(7) [expiration] = noop
(7) [logintime] = noop
(7) pap: WARNING: Config already contains a "known good" password
(&control:Cleartext-Password). Ignoring &control:Password-With-Header
(7) pap: WARNING: Auth-Type already set. Not setting to PAP
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0x90d0904890d88a80
(7) eap: Finished EAP session with state 0x90d0904890d88a80
(7) eap: Previous EAP request found for state 0x90d0904890d88a80,
released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) eap_mschapv2: authenticate {
(7) mschap: Found Cleartext-Password, hashing to create NT-Password
(7) mschap: Creating challenge hash with username: dbloch3
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key
--allow-mschapv2
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
--challenge=%{%{mschap:Challenge}:-00}
--nt-response=%{%{mschap:NT-Response}:-00}:
(7) mschap: EXPAND
--username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}}
(7) mschap: --> --username=dbloch3
(7) mschap: Creating challenge hash with username: dbloch3
(7) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00}
(7) mschap: --> --challenge=9acea959342abf86
(7) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00}
(7) mschap: -->
--nt-response=07a49c0565f4376624d86213c14b8445240d90a5ffd7ab78
(7) mschap: ERROR: Program returned code (1) and output 'No logon
servers are currently available to service the logon request. (0xc000005e)'
(7) mschap: ERROR: No logon servers are currently available to service
the logon request. (0xc000005e)
(7) mschap: Authentication failed
(7) eap_mschapv2: [mschap] = fail
(7) eap_mschapv2: } # authenticate = fail
(7) eap: Sending EAP Failure (code 4) ID 8 length 4
(7) eap: Freeing handler
(7) [eap] = reject
(7) } # authenticate = reject
(7) Failed to authenticate the user
(7) Using Post-Auth-Type Reject
(7) # Executing group from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) Post-Auth-Type REJECT {
(7) sql: EXPAND .query
(7) sql: --> .query
(7) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (3)
(7) sql: EXPAND %{User-Name}
(7) sql: --> dbloch3
(7) sql: SQL-User-Name set to 'dbloch3'
(7) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate
) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(7) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate
) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05 12:59:46.972526' )
(7) sql: Executing query: INSERT INTO radpostauth (username, pass,
reply, authdate ) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05
12:59:46.972526' )
(7) sql: SQL query returned: success
(7) sql: 1 record(s) updated
rlm_sql (sql): Released connection (3)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (8), 1 of 24 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX
socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10
(7) [sql] = ok
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> dbloch3
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) update outer.session-state {
(7) &Module-Failure-Message := &request:Module-Failure-Message
-> 'mschap: Program returned code (1) and output \'No logon servers are
currently available to service the logon request. (0xc000005e)\''
(7) } # update outer.session-state = noop
(7) } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) MS-CHAP-Error = "\010E=691 R=1 C=ad0886c2aa7ae0b9c01ac20e3d4a8de4
V=3 M=Authentication failed"
(7) EAP-Message = 0x04080004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap: MS-CHAP-Error = "\010E=691 R=1
C=ad0886c2aa7ae0b9c01ac20e3d4a8de4 V=3 M=Authentication failed"
(7) eap_peap: EAP-Message = 0x04080004
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap: MS-CHAP-Error = "\010E=691 R=1
C=ad0886c2aa7ae0b9c01ac20e3d4a8de4 V=3 M=Authentication failed"
(7) eap_peap: EAP-Message = 0x04080004
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 9 length 46
(7) eap: EAP session adding &reply:State = 0x902f42bb97265b96
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7) Framed-MTU = 994
(7) TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello"
(7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello"
(7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate"
(7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerKeyExchange"
(7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake,
ServerHelloDone"
(7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake,
ClientKeyExchange"
(7) TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished"
(7) TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec"
(7) TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished"
(7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7) TLS-Session-Version = "TLS 1.2"
(7) Module-Failure-Message := "mschap: Program returned code (1) and
output 'No logon servers are currently available to service the logon
request. (0xc000005e)'"
(7) Sent Access-Challenge Id 115 from 192.168.183.8:1812 to
192.168.176.5:32790 length 104
(7) EAP-Message =
0x0109002e19001703030023a9bbdc6cd36d3d3547892ba6ba00ab307a687f2a578ded6ead5b8d3d9cfc75e6da45cf
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x902f42bb97265b96ae439ed8c346540f
(7) Finished request
Waking up in 3.9 seconds.
(8) Received Access-Request Id 116 from 192.168.176.5:32790 to
192.168.183.8:1812 length 222
(8) User-Name = "dbloch3"
(8) NAS-IP-Address = 192.168.176.5
(8) NAS-Identifier = "hello"
(8) NAS-Port = 0
(8) Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST"
(8) Calling-Station-Id = "A4-C3-F0-D6-EC-46"
(8) Framed-MTU = 1400
(8) NAS-Port-Type = Wireless-802.11
(8) Connect-Info = "CONNECT 0Mbps 802.11b"
(8) EAP-Message =
0x0209002e190017030300230000000000000003a6efe366d01f3b89b17e89bd91dc68add17db12c9d734d7480b2c1
(8) State = 0x902f42bb97265b96ae439ed8c346540f
(8) Message-Authenticator = 0xf386d3783d4244e7bd3fc102e55189ee
(8) Restoring &session-state
(8) &session-state:Framed-MTU = 994
(8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3
Handshake, ClientHello"
(8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHello"
(8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Certificate"
(8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerKeyExchange"
(8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, ServerHelloDone"
(8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, ClientKeyExchange"
(8) &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2
Handshake, Finished"
(8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
ChangeCipherSpec"
(8) &session-state:TLS-Session-Information = "(TLS) send TLS 1.2
Handshake, Finished"
(8) &session-state:TLS-Session-Cipher-Suite =
"ECDHE-RSA-AES256-GCM-SHA384"
(8) &session-state:TLS-Session-Version = "TLS 1.2"
(8) &session-state:Module-Failure-Message := "mschap: Program returned
code (1) and output 'No logon servers are currently available to service
the logon request. (0xc000005e)'"
(8) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 46
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x902f42bb97265b96
(8) eap: Finished EAP session with state 0x902f42bb97265b96
(8) eap: Previous EAP request found for state 0x902f42bb97265b96,
released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: (TLS) EAP Done initial handshake
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap: ERROR: The users session was previously rejected:
returning reject (again.)
(8) eap_peap: This means you need to read the PREVIOUS messages in the
debug output
(8) eap_peap: to find out the reason why the user was rejected
(8) eap_peap: Look for "reject" or "fail". Those earlier messages
will tell you
(8) eap_peap: what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module
failed
(8) eap: Sending EAP Failure (code 4) ID 9 length 4
(8) eap: Failed in EAP select
(8) [eap] = invalid
(8) } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) Post-Auth-Type REJECT {
(8) sql: EXPAND .query
(8) sql: --> .query
(8) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (4)
(8) sql: EXPAND %{User-Name}
(8) sql: --> dbloch3
(8) sql: SQL-User-Name set to 'dbloch3'
(8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate
) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(8) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate
) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05 12:59:47.050856' )
(8) sql: Executing query: INSERT INTO radpostauth (username, pass,
reply, authdate ) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05
12:59:47.050856' )
(8) sql: SQL query returned: success
(8) sql: 1 record(s) updated
rlm_sql (sql): Released connection (4)
(8) [sql] = ok
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject: --> dbloch3
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8) [attr_filter.access_reject] = updated
(8) [eap] = noop
(8) policy remove_reply_message_if_eap {
(8) if (&reply:EAP-Message && &reply:Reply-Message) {
(8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(8) else {
(8) [noop] = noop
(8) } # else = noop
(8) } # policy remove_reply_message_if_eap = noop
(8) } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) (8) Discarding duplicate request from client AP_pow3 port 32790 -
ID: 116 due to delayed response
(8) Sending delayed response
(8) Sent Access-Reject Id 116 from 192.168.183.8:1812 to
192.168.176.5:32790 length 44
(8) EAP-Message = 0x04090004
(8) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 2.9 seconds.
(0) Cleaning up request packet ID 108 with timestamp +15 due to
cleanup_delay was reached
(1) Cleaning up request packet ID 109 with timestamp +15 due to
cleanup_delay was reached
(2) Cleaning up request packet ID 110 with timestamp +16 due to
cleanup_delay was reached
(3) Cleaning up request packet ID 111 with timestamp +16 due to
cleanup_delay was reached
(4) Cleaning up request packet ID 112 with timestamp +16 due to
cleanup_delay was reached
Waking up in 0.8 seconds.
(5) Cleaning up request packet ID 113 with timestamp +16 due to
cleanup_delay was reached
(6) Cleaning up request packet ID 114 with timestamp +16 due to
cleanup_delay was reached
(7) Cleaning up request packet ID 115 with timestamp +16 due to
cleanup_delay was reached
(8) Cleaning up request packet ID 116 with timestamp +17 due to
cleanup_delay was reached
Ready to process requests
--
Z poważaniem,
*Dariusz Bloch*
Specjalista ds. IT
tel. +48 22 420 57 56
kom. +48 665 678 605
dariusz.bloch at telbridge.pl
www.telbridge.pl <http://www.telbridge.pl>
<http://www.telbridge.pl>
<http://www.telbridge.pl>
<http://www.telbridge.pl>
Telbridge sp. z o.o. sp. k. ul. Zagnańska 49, 25-528 Kielce, NIP:
959-153-09-86. Sąd Rejonowy w Kielcach, X Wydział Gospodarczy KRS, KRS
0000788347,
Oddział w Toruniu, ul. Gdańska 4a, II p. 87-100 Toruń, tel. +48 22 420
56 60, tel./fax +48 22 420 56 55
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3399 bytes
Desc: Kryptograficzna sygnatura S/MIME
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20250307/fd6412cc/attachment-0001.bin>
More information about the Freeradius-Users
mailing list