Inquiry Regarding Backslash Handling in Reply-Message
平林 哲
Satoshi.Hirabayashi at soliton.co.jp
Wed Sep 3 11:09:22 UTC 2025
Hi!
We have encountered an issue in FreeRADIUS version 3.2.8 where the
backslash (`\`) character in the `Reply-Message` configured for a user
is not correctly reflected in the response.
---
**Configuration Details:**
In `mods-available/ldap2`, the following directive is set:
```
valuepair_attribute = "radiusAttribute"
```
The LDAP entry for `uid=user003` includes the following attributes:
```
radiusAttribute: Reply-Message += 'mess\age'
radiusAttribute: Reply-Message += 'mess\\age'
radiusAttribute: Reply-Message += 'mess\\\age'
radiusAttribute: Reply-Message += 'mess\\\\age'
```
---
**Observed Behavior:**
When PAP authentication is performed using this configuration, the
response consistently contains only a single backslash, regardless of
the number of backslashes defined in LDAP:
```
Reply-Message = "mess\age"
Reply-Message = "mess\age"
Reply-Message = "mess\age"
Reply-Message = "mess\age"
```
---
**Inquiry:**
If backslashes (`\`) within the LDAP database value are escaped as shown
below:
```
radiusAttribute: Reply-Message += 'mess\\age'
radiusAttribute: Reply-Message += 'mess\\\\age'
```
Is it possible to modify the system so that the response reflects the
intended number of backslashes, as follows?
```
Reply-Message = "mess\age"
Reply-Message = "mess\\age"
```
Any guidance or suggestions regarding this behavior would be greatly
appreciated.
Best regards,
Satoshi Hirabayashi
----- radiusd -X -----
FreeRADIUS Version 3.2.8
Copyright (C) 1999-2025 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
FreeRADIUS is developed, maintained, and supported by InkBridge Networks.
For commercial support, please email sales at inkbridgenetworks.com
https://inkbridgenetworks.com/
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy_test.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/totp
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/ldap2
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/rfc7542
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file
/usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
proxy_dedup_window = 1
cleanup_delay = 5
max_requests = 16384
max_fds = 512
postauth_client_lost = no
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
delay_proxy_rejects = no
status_server = yes
require_message_authenticator = "auto"
limit_proxy_state = "auto"
allow_vulnerable_openssl = "no"
}
unlang {
group_stop_return = no
policy_stop_return = no
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server naeps93 {
nonblock = no
ipaddr = 192.168.1.93
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server localhost {
nonblock = no
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
home_server_pool naeps93_pool {
type = fail-over
home_server = naeps93
}
realm soliton.co.jp {
auth_pool = naeps93_pool
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = "no"
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Shared secret for client localhost is short, and likely can be broken by
an attacker.
client localhost_ipv6 {
ipv6addr = ::1
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Shared secret for client localhost_ipv6 is short, and likely can be
broken by an attacker.
client naeps245 {
ipaddr = 192.168.1.245
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Shared secret for client naeps245 is short, and likely can be broken by
an attacker.
client naeps102 {
ipaddr = 192.168.1.102
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Shared secret for client naeps102 is short, and likely can be broken by
an attacker.
Debugger not attached
Configuration version: 9b08-cf8e-ba66-a123
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = LDAP
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_realm
# Loading module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file
/usr/local/etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_utf8
# Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
# Loaded module rlm_date
# Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file
/usr/local/etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_exec
# Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_unix
# Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_expr
# Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/aeouaaaceeeeiio?uuuayAEOUsAAACEEEEIIO?UUU?"
}
# Loaded module rlm_always
# Loading module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups =
"/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_files
# Loading module "files" from file
/usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile =
"/usr/local/etc/raddb/mods-config/files/pre-proxy"
key = "%{%{Stripped-User-Name}:-%{User-Name}}"
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loading module "ntlm_auth" from file
/usr/local/etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_digest
# Loading module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
# Loading module "sradutmp" from file
/usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/usr/local/etc/raddb/mods-enabled/replicate
# Loaded module rlm_unpack
# Loading module "unpack" from file
/usr/local/etc/raddb/mods-enabled/unpack
# Loaded module rlm_detail
# Loading module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
detail {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
dates_as_integer = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/usr/local/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_eap
# Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
max_eap_type = 52
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
dedup_key = ""
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /usr/local/etc/raddb/mods-enabled/ldap2
ldap {
server = "192.168.1.123"
port = 389
identity = "cn=admin,dc=rdd-osaka,dc=soliton,dc=corp"
password = <<< secret >>>
sasl {
}
valuepair_attribute = "radiusAttribute"
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
scope = "sub"
name_attribute = "cn"
cacheable_name = no
cacheable_dn = no
allow_dangling_group_ref = no
}
client {
scope = "sub"
base_dn = ""
}
profile {
}
options {
ldap_debug = 0
net_timeout = 10
res_timeout = 20
srv_timelimit = 20
idle = 60
probes = 3
interval = 30
}
tls {
check_crl = no
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_pap
# Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
instantiate {
}
# Instantiating module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
# Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
# Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa
# Instantiating module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Instantiating module "eap" from file
/usr/local/etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
ca_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = ""
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = yes
}
# Instantiating module "ldap" from file
/usr/local/etc/raddb/mods-enabled/ldap2
rlm_ldap: libldap vendor: OpenLDAP, version: 20457
rlm_ldap (ldap): Couldn't find configuration for accounting, will return
NOOP for calls from this section
rlm_ldap (ldap): Couldn't find configuration for post-auth, will return
NOOP for calls from this section
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! libldap is using GnuTLS, while FreeRADIUS is using OpenSSL
!! There may be random issues with TLS connections due to this conflict.
!! The server may also crash.
!! See https://wiki.freeradius.org/modules/Rlm_ldap for more information.
!!
!! Perhaps also see https://ltb-project.org/download.html
!! Which may have a pre-build package of libldap which links to OpenSSL.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 5
max = 10
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
max_retries = 5
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 10 pending
slots used
rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 9 pending slots
used
rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 8 pending slots
used
rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 7 pending slots
used
rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 6 pending slots
used
rlm_ldap (ldap): Connecting to ldap://192.168.1.123:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "pap" from file
/usr/local/etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
Compiling Auth-Type LDAP for attr Auth-Type
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/usr/local/etc/raddb/sites-enabled/inner-tunnel:366
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 47811
Listening on proxy address :: port 36791
Ready to process requests
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BlastRADIUS check: Received packet without Message-Authenticator.
Setting "require_message_authenticator = false" for client naeps245
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
UPGRADE THE CLIENT AS YOUR NETWORK IS VULNERABLE TO THE BLASTRADIUS ATTACK.
Once the client is upgraded, set "require_message_authenticator = true"
for client naeps245
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BlastRADIUS check: Received packet without Proxy-State.
Setting "limit_proxy_state = true" for client naeps245
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The packet does not contain Message-Authenticator, which is a security
issue.
UPGRADE THE CLIENT AS YOUR NETWORK MAY BE VULNERABLE TO THE BLASTRADIUS
ATTACK.
Once the client is upgraded, set "require_message_authenticator = true"
for client naeps245
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
(0) Received Access-Request Id 112 from 192.168.1.245:50341 to
192.168.1.123:1812 length 61
(0) User-Name = "user003"
(0) User-Password = "S0l!@rch"
(0) Calling-Station-Id = "112233445566"
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\\.\\./ ) {
(0) if (&User-Name =~ /\\.\\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "user003", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) files: EXPAND %{%{Stripped-User-Name}:-%{User-Name}}
(0) files: --> user003
(0) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(0) ldap: EXPAND (uid=%{User-Name})
(0) ldap: --> (uid=user003)
(0) ldap: Performing search in
"ou=Users,dc=rdd-osaka,dc=soliton,dc=corp" with filter "(uid=user003)",
scope "sub"
(0) ldap: Waiting for search result...
(0) ldap: User object found at DN
"uid=user003,ou=Users,dc=rdd-osaka,dc=soliton,dc=corp"
(0) ldap: Processing user attributes
(0) ldap: Reply-Message += 'mess\\age'
(0) ldap: Reply-Message += 'mess\\age'
(0) ldap: Reply-Message += 'mess\\age'
(0) ldap: Reply-Message += 'mess\\age'
rlm_ldap (ldap): Released connection (0)
(0) [ldap] = updated
(0) if ((ok || updated) && User-Password && !control:Auth-Type) {
(0) if ((ok || updated) && User-Password && !control:Auth-Type) -> TRUE
(0) if ((ok || updated) && User-Password && !control:Auth-Type) {
(0) update control {
(0) &Auth-Type := LDAP
(0) } # update control = noop
(0) } # if ((ok || updated) && User-Password && !control:Auth-Type)
= noop
(0) [expiration] = noop
(0) [logintime] = noop
Not doing PAP as Auth-Type is already set.
(0) [pap] = noop
(0) } # authorize = updated
(0) Found Auth-Type = LDAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0) Auth-Type LDAP {
rlm_ldap (ldap): Reserved connection (1)
(0) ldap: Login attempt by "user003"
(0) ldap: Using user DN from request
"uid=user003,ou=Users,dc=rdd-osaka,dc=soliton,dc=corp"
(0) ldap: Waiting for bind result...
(0) ldap: Bind successful
(0) ldap: Bind as user
"uid=user003,ou=Users,dc=rdd-osaka,dc=soliton,dc=corp" was successful
rlm_ldap (ldap): Released connection (1)
(0) [ldap] = ok
(0) } # Auth-Type LDAP = ok
(0) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(0) post-auth {
(0) if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) {
(0) if (session-state:User-Name && reply:User-Name &&
request:User-Name && (reply:User-Name == request:User-Name)) -> FALSE
(0) update {
(0) No attributes updated for RHS &session-state:
(0) } # update = noop
(0) [exec] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) if (EAP-Key-Name && &reply:EAP-Session-Id) {
(0) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE
(0) } # post-auth = noop
(0) Login OK: [user003] (from client naeps245 port 0 cli 112233445566)
(0) Sent Access-Accept Id 112 from 192.168.1.123:1812 to
192.168.1.245:50341 length 78
(0) Reply-Message += "mess\\age"
(0) Reply-Message += "mess\\age"
(0) Reply-Message += "mess\\age"
(0) Reply-Message += "mess\\age"
(0) Finished request
Waking up in 4.9 seconds.
More information about the Freeradius-Users
mailing list