FreeRadius seems to be working, but not getting it to respond

[Michelle Manning]

Hi,
I have been reading the list for a couple of days now and maybe I have 
missed something - but here goes.
My set up is the following - Linksys Router with DD-WRT running on it. 
It does work as it connects to a older version of Radius
on another server. The newer server is CENTOS with FreeRadius 1.1.3 - I 
changed the config files and the information below is
from running Radius in debug mode. From what I can see it should be 
happy. I have the DD-WRT pointing to the new server - the 
hotspotlogin.cgi is
in the correct place and configured correctly. I also have PhpMyPrepaid 
on the server - and do wonder if this is my problem - but I don't think 
so....

Any ideas? Is there something in this 'log' file that jumps out at any 
of you?

And - the log file in /usr/local/var/log/radius has nothing in it. I was 
hoping that that would give me some clues....

Please help.

Michelle

*************************************************************
Starting - reading configuration files ...
reread_config:  reading radiusd.conf
Config:   including file: /usr/local/etc/raddb/proxy.conf
Config:   including file: /usr/local/etc/raddb/clients.conf
Config:   including file: /usr/local/etc/raddb/snmp.conf
Config:   including file: /usr/local/etc/raddb/eap.conf
Config:   including file: /usr/local/etc/raddb/sql.conf
 main: prefix = "/usr/local"
 main: localstatedir = "/usr/local/var"
 main: logdir = "/usr/local/var/log/radius"
 main: libdir = "/usr/local/lib"
 main: radacctdir = "/usr/local/var/log/radius/radacct"
 main: hostname_lookups = no
 main: max_request_time = 30
 main: cleanup_delay = 5
 main: max_requests = 1024
 main: delete_blocked_requests = 0
 main: port = 0
 main: allow_core_dumps = no
 main: log_stripped_names = no
 main: log_file = "/usr/local/var/log/radius/radius.log"
 main: log_auth = no
 main: log_auth_badpass = no
 main: log_auth_goodpass = no
 main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
 main: user = "radiusd"
 main: group = "radiusd"
 main: usercollide = no
 main: lower_user = "no"
 main: lower_pass = "no"
 main: nospace_user = "no"
 main: nospace_pass = "no"
 main: checkrad = "/usr/local/sbin/checkrad"
 main: proxy_requests = yes
 proxy: retry_delay = 5
 proxy: retry_count = 3
 proxy: synchronous = no
 proxy: default_fallback = yes
 proxy: dead_time = 120
 proxy: post_proxy_authorize = yes
 proxy: wake_all_if_all_dead = no
 security: max_attributes = 200
 security: reject_delay = 1
 security: status_server = no
 main: debug_level = 0
read_config_files:  reading dictionary
read_config_files:  reading naslist
Using deprecated naslist file.  Support for this will go away soon.
read_config_files:  reading clients
read_config_files:  reading realms
radiusd:  entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
 exec: wait = yes
 exec: program = "(null)"
 exec: input_pairs = "request"
 exec: output_pairs = "(null)"
 exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
 pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
 mschap: use_mppe = yes
 mschap: require_encryption = no
 mschap: require_strong = no
 mschap: with_ntdomain_hack = no
 mschap: passwd = "(null)"
 mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded System
 unix: cache = no
 unix: passwd = "(null)"
 unix: shadow = "/etc/shadow"
 unix: group = "(null)"
 unix: radwtmp = "/usr/local/var/log/radius/radwtmp"
 unix: usegroup = no
 unix: cache_reload = 600
Module: Instantiated unix (unix)
Module: Loaded eap
 eap: default_eap_type = "md5"
 eap: timer_expire = 60
 eap: ignore_unknown_eap_types = no
 eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
 gtc: challenge = "Password: "
 gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
 mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
 preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
 preprocess: hints = "/usr/local/etc/raddb/hints"
 preprocess: with_ascend_hack = no
 preprocess: ascend_channels_per_line = 23
 preprocess: with_ntdomain_hack = no
 preprocess: with_specialix_jetstream_hack = no
 preprocess: with_cisco_vsa_hack = no
 preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
 realm: format = "suffix"
 realm: delimiter = "@"
 realm: ignore_default = no
 realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded SQL
 sql: driver = "rlm_sql_mysql"
 sql: server = "localhost"
 sql: port = ""
 sql: login = "root"
 sql: password = ""
 sql: radius_db = "radius"
 sql: nas_table = "nas"
 sql: sqltrace = yes
 sql: sqltracefile = "/usr/local/var/log/radius/sqltrace.sql"
 sql: readclients = yes
 sql: deletestalesessions = yes
 sql: num_sql_socks = 5
 sql: sql_user_name = "%{User-Name}"
 sql: default_user_profile = ""
 sql: query_on_not_found = no
 sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, 
op           FROM radcheck           WHERE Username = 
'%{SQL-User-Name}'           ORDER BY id"
 sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, 
op           FROM radreply           WHERE Username = 
'%{SQL-User-Name}'           ORDER BY id"
 sql: authorize_group_check_query = "SELECT 
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op  
FROM radgroupcheck,usergroup WHERE usergroup.Username = 
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName 
ORDER BY radgroupcheck.id"
 sql: authorize_group_reply_query = "SELECT 
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op  
FROM radgroupreply,usergroup WHERE usergroup.Username = 
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName 
ORDER BY radgroupreply.id"
 sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', 
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), 
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = 
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND 
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
 sql: accounting_update_query = "UPDATE radacct           SET 
FramedIPAddress = '%{Framed-IP-Address}',           AcctSessionTime = 
'%{Acct-Session-Time}',           AcctInputOctets = 
'%{Acct-Input-Octets}',           AcctOutputOctets = 
'%{Acct-Output-Octets}'           WHERE AcctSessionId = 
'%{Acct-Session-Id}'           AND UserName = 
'%{SQL-User-Name}'           AND NASIPAddress= '%{NAS-IP-Address}'"
 sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, 
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, 
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + 
%{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', 
'%{Acct-Authentic}', '', '%{Acct-Input-Octets}', 
'%{Acct-Output-Octets}', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', 
'%{Framed-IP-Address}', '0')"
 sql: accounting_start_query = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, 
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, 
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', 
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', 
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
 sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = 
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = 
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND 
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', 
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = 
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', 
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = 
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE 
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' 
AND NASIPAddress = '%{NAS-IP-Address}'"
 sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, 
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, 
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, 
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, 
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, 
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) 
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', 
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', 
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + 
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', 
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', 
'%{Acct-Output-Octets}', '%{Called-Station-Id}', 
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', 
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
 sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE 
UserName='%{SQL-User-Name}'"
 sql: connect_failure_retry_delay = 60
 sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE 
UserName='%{SQL-User-Name}' AND AcctStopTime = 0"
 sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, 
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, 
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND 
AcctStopTime = 0"
 sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, 
date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', 
'%{reply:Packet-Type}', NOW())"
 sql: safe-characters = 
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to root at localhost:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
rlm_sql (sql): - generate_sql_clients
rlm_sql (sql): Query: SELECT * FROM nas
rlm_sql (sql): Reserving sql socket id: 4
rlm_sql_mysql: query:  SELECT * FROM nas
rlm_sql (sql): Released sql socket id: 4
Module: Instantiated sql (sql)
Module: Loaded files
 files: usersfile = "/usr/local/etc/raddb/users"
 files: acctusersfile = "/usr/local/etc/raddb/acct_users"
 files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
 files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
 acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, 
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
 detail: detailfile = 
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
 radutmp: filename = "/usr/local/var/log/radius/radutmp"
 radutmp: username = "%{User-Name}"
 radutmp: case_sensitive = yes
 radutmp: check_with_nas = yes
 radutmp: perm = 384
 radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
 detail: detailfile = 
"/usr/local/var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d"
 detail: detailperm = 384
 detail: dirperm = 493
 detail: locking = no
Module: Instantiated detail (reply_log)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
********************************************************************************