"Clear text password not available"

[Kevin Bonner]

On Monday 25 June 2007 10:14:07 Flavio Silvestrone wrote:
> If i enable the same pppoe profile (user: flavio, password: flavio) on the
> Access Point all work fine; When i disable the profile on the Access Point
> and i configure the radius client on the Access Point i have the problem
> This is the configuration on the file /etc/raddb/users for the user
> "flavio"
>
>
>        Service-Type = Framed-User,
>        Framed-Protocol = PPP,
>        Framed-IP-Address = 10.1.1.8,
>        Framed-IP-Netmask = 255.255.255.0,
>        Framed-Routing = Broadcast-Listen,
> #       Framed-Filter-Id = "std.ppp",
>        Framed-MTU = 1500,
> #       Framed-Compression = Van-Jacobsen-TCP-IP
>
> Any idea to find out the prob ?
> Than's a lot
> Flavio

Can you post the FULL entry that you have in the users file?  What you posted 
lists only reply items, which give us no information related to the problem 
you are having.  What check items do you have?  If you are using a recent 
version of freeradius, you should have the Cleartext-Password as a check 
item.

Have you run the server in debug mode?  If so, there are probably error 
messages in the output which may assist you in resolving your problem.

Kevin Bonner
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20070625/ed42a9dd/attachment.pgp>