I have been running it in debug mode. I don't think it's the module itself. Here is what I see: Ready to process requests. rad_recv: Access-Request packet from host X.Y.73.124:32769, id=77, length=56 User-Name = "test" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 1812 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall: group authorize returns noop for request 0 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 -----Original Message----- From: freeradius-devel-bounces@lists.freeradius.org [mailto:freeradius-devel-bounces@lists.freeradius.org] On Behalf Of Alan DeKok Sent: Tuesday, June 07, 2005 12:55 PM To: FreeRadius developers mailing list Subject: Re: PAP failure "Batta, Anurag" <Anurag_Batta@usr.com> wrote:
Did anyone experience this while testing? I loaded PAP module and put a user and pwd in config file. I get access reject in reply to radtest.
Run the server in debugging mode to see why. If it's a problem in the PAP module, instrument the code to see what it's doing, and why. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/devel.html This e-mail may contain confidential or privileged information. If you think you have received this e-mail in error, please advise the sender by reply e-mail and then delete this e-mail immediately. Thank you. U. S. Robotics