hi arran! i'm not sure yet, but it seems not solved. that's our gdb output: (0) Proxying request to home server 172.20.23.30 port 1812 Sending Access-Request of id 56 from 172.20.23.31 port 1814 to 172.20.23.30 port 1812 NAS-Port-Type = Wireless-802.16 Proxy-State = 0x313139 WiMAX-Available-In-Client = 99 Service-Type = Framed-User WiMAX-BS-Id = 0x303030303230303630313030 WiMAX-Release = "1.1" Message-Authenticator = 0x6166e5bd182d066691937bdc3ec9a893 WiMAX-Accounting-Capabilities = Flow-Based NAS-IP-Address = 172.20.10.121 WiMAX-Hotlining-Capabilities = Hotline-Profile-Id Calling-Station-Id = "0C4C399C58F7" User-Name = "test@fr3" Event-Timestamp = "Jun 1 2013 15:23:33 CEST" NAS-Identifier = "RM_TI_ASN-GW" WiMAX-GMT-Timezone-offset = 16777216 EAP-Message = 0x02fd000d017465737440667233 Attr-26.24757.1.5 = 0x01 WiMAX-Idle-Mode-Notification-Cap = Supported Waking up in 0.3 seconds. rad_recv: Access-Challenge packet from host 172.20.23.30 port 1812, id=56, length=85 EAP-Message = 0x01fe001604102735f90a69c8e681f667a84f5a7e692a Message-Authenticator = 0xa1f5b821e7e2f8bb57d3608a3efbfab1 State = 0x0caf7b430c517f3cf22df6a329b742e7 Proxy-State = 0x313139 (0) # Executing section post-proxy from file /etc/raddb/sites-enabled/default (0) group post-proxy { (0) - entering group post-proxy {...} (0) attr_filter.access_challenge : expand: '%{User-Name}' -> 'test@fr3' (0) attr_filter.access_challenge : Matched entry DEFAULT at line 13 Program received signal SIGSEGV, Segmentation fault. 0x00007ffff0e02d7b in attr_filter_common (instance=0x8a1a20, request=0x8e76b0, packet=0x8e7980) at src/modules/rlm_attr_filter/rlm_attr_filter.c:267 267 if (vp->da->attr == check_item->da->attr) { Missing separate debuginfos, use: debuginfo-install freeradius-3.0.0-15.el6.x86_64 (gdb) info frame Stack level 0, frame at 0x7fffffffd1e0: rip = 0x7ffff0e02d7b in attr_filter_common (src/modules/rlm_attr_filter/rlm_attr_filter.c:267); saved rip 0x41d949 called by frame at 0x7fffffffda00 source language c. Arglist at 0x7fffffffcfb8, args: instance=0x8a1a20, request=0x8e76b0, packet=0x8e7980 Locals at 0x7fffffffcfb8, Previous frame's sp is 0x7fffffffd1e0 Saved registers: rbx at 0x7fffffffd1a8, rbp at 0x7fffffffd1b0, r12 at 0x7fffffffd1b8, r13 at 0x7fffffffd1c0, r14 at 0x7fffffffd1c8, r15 at 0x7fffffffd1d0, rip at 0x7fffffffd1d8 (gdb) (gdb) info args instance = 0x8a1a20 request = 0x8e76b0 packet = 0x8e7980 (gdb) (gdb) info locals fall_through = <value optimized out> relax_filter = 0 inst = 0x8a1a20 vp = 0x8e76b0 input = {first = 0x8e79f0, found = 0x0, last = 0x0, current = 0x944310, next = 0x944420} check = {first = 0x8a2c78, found = 0x0, last = 0x0, current = 0x8a24e0, next = 0x8a2590} out = {first = 0x7fffffffd198, found = 0x0, last = 0x0, current = 0x0, next = 0x0} input_item = <value optimized out> check_item = 0x8a24e0 output = 0x0 pl = 0x8a2c70 found = 1 pass = <value optimized out> fail = <value optimized out> keyname = 0x7fffffffd010 "test@fr3" buffer = "test@fr3\000D\224\000\000\000\000\000pޘ\000\000\000\000\000\372\217\024\357\000\000\000\000\060\327\377\377\377\177\000\000 \327\377\377\377\177\000\000\f\000\000\000\000\000\000\000P\330\377\377\377\177\000\000\005\353\a\366\377\177\000\000\366\253:\367\377\177\000\000`\327\377\377\377\177\000\000P\327\377\377\377\177\000\000\f\000\000\000\000\000\000\000\200\330\377\377\377\177\000\000\060x313139\000\063\060c517f3cf22df6a329b742e7\000\070\064f5a7e692a\000\000\372\352\a\366\377\177\000\000\250\322\377\377\377\177\000\000\200\001\231", '\000' <repeats 13 times>, " \000\000\000\060\000\000\000\340\321\377\377\377\177\000\000\360\320\377\377\377\177\000\000\270\326\377\377\377\177\000\000\000\321\377\377\377\177\000\000\000\000\000\000\000\000\000\000\254\326\377\377\377\177\000\000\310\326\377\377\377\177\000" (gdb) thank you for your help! duffy Il 30/05/13 19.24, Arran Cudbard-Bell ha scritto:
On 30 May 2013, at 11:43, duffy <reg.marcos@yahoo.it> wrote:
ooops, i'm sorry.. you're right, i wrote to the wrong list. btw thank you arran, you fixed it!
now, this is the new issue:
rad_recv: Access-Challenge packet from host 172.20.23.30 port 1812, id=159, length=85 EAP-Message = 0x01a800160410b8a13ab82ba23820a55c0440bf74467f Message-Authenticator = 0x78a5dd4358024b720b10b1bcb7b0c917 State = 0xd036ba28d09ebe94e88e461954f76013 Proxy-State = 0x323432 (0) # Executing section post-proxy from file /etc/raddb/sites-enabled/default (0) group post-proxy { (0) - entering group post-proxy {...} (0) attr_filter.access_challenge : expand: '%{User-Name}' -> 'test@fr3' (0) attr_filter.access_challenge : Matched entry DEFAULT at line 13
Ok think i've got that one too.
Arran Cudbard-Bell <a.cudbardb@freeradius.org> FreeRADIUS Development Team
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/devel.html