Hello, I think that this is not an error from jradius. I have upgraded to freeradius 1.0.3 and I have the same error but I have more log. Has you can see at the end of this log, the error is after the process of the packet by jradius. rlm_jradius: packing attribute Cisco-AVPair (type: 589825; len: 20) rlm_jradius: packing attribute Cisco-AVPair (type: 589825; len: 31) rlm_jradius: packing attribute Calling-Station-Id (type: 31; len: 10) rlm_jradius: packing attribute Called-Station-Id (type: 30; len: 10) rlm_jradius: packing attribute NAS-Port-Type (type: 61; len: 4) rlm_jradius: packing attribute NAS-Port (type: 5; len: 4) rlm_jradius: packing attribute NAS-Port-Id (type: 87; len: 11) rlm_jradius: packing attribute Service-Type (type: 6; len: 4) rlm_jradius: packing attribute NAS-IP-Address (type: 4; len: 4) rlm_jradius: packing attribute Client-IP-Address (type: 1052; len: 4) rlm_jradius: packing packet with code: 1 (attr length: 537) rlm_jradius: packing packet with code: 0 (attr length: 0) rlm_jradius: sending 568 bytes to jradius server rlm_jradius: return code 0; receiving 2 packets rlm_jradius: reading packet: code=1 len=537 rlm_jradius: changing packet id from 0 to 3 rlm_jradius: reading attribute: type=1; len=10 rlm_jradius: reading attribute: type=2; len=0 rlm_jradius: reading attribute: type=589825; len=54 rlm_jradius: reading attribute: type=589825; len=36 rlm_jradius: reading attribute: type=589825; len=22 rlm_jradius: reading attribute: type=589825; len=20 rlm_jradius: reading attribute: type=589825; len=31 rlm_jradius: reading attribute: type=589848; len=48 rlm_jradius: reading attribute: type=589925; len=21 rlm_jradius: reading attribute: type=589929; len=28 rlm_jradius: reading attribute: type=31; len=10 rlm_jradius: reading attribute: type=30; len=10 rlm_jradius: reading attribute: type=61; len=4 rlm_jradius: reading attribute: type=5; len=4 rlm_jradius: reading attribute: type=87; len=11 rlm_jradius: reading attribute: type=6; len=4 rlm_jradius: reading attribute: type=4; len=4 rlm_jradius: reading attribute: type=1052; len=4 rlm_jradius: reading packet: code=0 len=0 rlm_jradius: changing packet id from 0 to 4 rlm_jradius: reading request: config_item: len=0 modcall[authorize]: module "jradius" returns reject for request 51 modcall: group authorize returns reject for request 51 Delaying request 51 for 1 seconds Finished request 51 Going to the next request --- Walking the entire request list --- Cleaning up request 50 ID 1 with timestamp 42a56398 Waking up in 1 seconds... --- Walking the entire request list --- Assertion failed in request_list.c, line 1000 -----Original Message----- From: freeradius-devel-bounces@lists.freeradius.org [mailto:freeradius-devel-bounces@lists.freeradius.org] On Behalf Of Alan DeKok Sent: lundi, 6. juin 2005 17:51 To: FreeRadius developers mailing list Subject: Re: crash of freeradius 1.0.2 "Schweizer Laurent" <laurent.schweizer@eivd.ch> wrote:
Hello, i use freeradius 1.0.2 with the jradius module and i have many crashes.
I'd say it's issues with jradius. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/devel.html