OK, I'm trying to get the 2.1.8 server to do a simple challenge/response with Auth-Challenge, so as to test my client. I've setup rlm_example as an enabled module and modified it so that if will return RLM_MODULE_OK or RLM_MODULE_REJECT, depending upon the response. I've added an example file to the raddb/modules directory, and modified sites-available/default to include example at the end of the "authenticate" and "authorize" sections. The first Access-Request successfully generates an Access-Challenge in response. When I send the second Access-Request in response to the Access-Challenge, I get the output below. Note that the example module is returning RLM_MODULE_OK I checked every config file in raddb, and cannot find case where there is an "Auth-Type = Crypt". What am I doing wrong? Thanks, ScottN -- BEGIN radiusd -X output Thu Jun 24 12:36:36 2010 : Info: +- entering group authorize {...} Thu Jun 24 12:36:36 2010 : Info: ++[preprocess] returns ok Thu Jun 24 12:36:36 2010 : Info: ++[chap] returns noop Thu Jun 24 12:36:36 2010 : Info: ++[mschap] returns noop Thu Jun 24 12:36:36 2010 : Info: [suffix] No '@' in User-Name = "[redacted]", looking up realm NULL Thu Jun 24 12:36:36 2010 : Info: [suffix] No such realm "NULL" Thu Jun 24 12:36:36 2010 : Info: ++[suffix] returns noop Thu Jun 24 12:36:36 2010 : Info: [eap] No EAP-Message, not doing EAP Thu Jun 24 12:36:36 2010 : Info: ++[eap] returns noop Thu Jun 24 12:36:36 2010 : Info: ++[unix] returns updated Thu Jun 24 12:36:36 2010 : Info: [example] Found reply to access challenge Thu Jun 24 12:36:36 2010 : Info: [example] Found response in reply: '[redacted]' Thu Jun 24 12:36:36 2010 : Info: [example] Response is good Thu Jun 24 12:36:36 2010 : Info: ++[example] returns ok Thu Jun 24 12:36:36 2010 : Info: WARNING: Please update your configuration, and remove 'Auth-Type = Crypt' Thu Jun 24 12:36:36 2010 : Info: WARNING: Use the PAP module instead. Thu Jun 24 12:36:36 2010 : Info: Failed to authenticate the user. Thu Jun 24 12:36:36 2010 : Info: Delaying reject of request 1 for 1 seconds Thu Jun 24 12:36:36 2010 : Debug: Going to the next request Thu Jun 24 12:36:36 2010 : Debug: Waking up in 0.8 seconds. Thu Jun 24 12:36:37 2010 : Info: Sending delayed reject for request 1 Sending Access-Reject of id 108 to 10.1.1.104 port 3277