Hi, HEAD of master, building with BOILER=yes (without BOILER=yes is fine), I get: freeradius-server$ echo BOILER=yes >> Make.inc.in freeradius-server$ ./configure --prefix=/opt/fr3 freeradius-server$ make freeradius-server$ build/bin/radiusd -X FreeRADIUS Version 3.0.0, for host x86_64-unknown-linux-gnu, built on Feb 11 2012 at 02:40:47 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Errors reading /opt/fr3/etc/raddb: No such file or directory freeradius-server$ build/bin/relink/radiusd -X build/bin/relink/radiusd: error while loading shared libraries: libfreeradius-radius.so: cannot open shared object file: No such file or directory ...OK - probably looking in /opt/fr3/lib freeradius-server$ make install ... freeradius-server$ build/bin/radiusd -X ...as above, OK freeradius-server$ build/bin/relink/radiusd -X ...also OK - makes sense, now installed. freeradius-server$ /opt/fr3/sbin/radiusd -X ...also OK freeradius-server$ cd /opt/fr3/sbin sbin$ ./radiusd -X ./radiusd: error while loading shared libraries: build/lib/relink/.libs/rlm_acctlog.so: cannot open shared object file: No such file or directory ... not good. The problem seems to be in the final 'gcc -rdynamic -o build/bin/relink/radiusd' command - if you remove all the many ' -Wl,-rpath=/opt/fr3/lib build/lib/relink/.libs/rlm_acctlog.so' arguments and run manually, then copy the resulting binary to the correct location, all is fine. The dynamic libs seem to be being added to gcc by $${${1}_R_PRLIBS} in scripts/libtool.mk:106, and previously :205, but before that I get a bit lost :-) Any ideas? Thanks, Matthew -- Matthew Newton, Ph.D. <mcn4@le.ac.uk> Systems Architect (UNIX and Networks), Network Services, I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom For IT help contact helpdesk extn. 2253, <ithelp@le.ac.uk>