Hi All, I've an issue about EAP in 802.1X. right now, I'm trying EAP-MD5 for 802.1X using freeradius 2.0.3 and procurve switch, sadly it doesn't work. but when I 'am using freeradius 1.1.7 it works smoothly .... I've tried not only using native windows XP SP 2 supplicant but also wpa_supplicant. both don't work using freeradius2. I've also tried reinstall the freeradius 2.0.3 ( i'm forget using mercurial ), I thought I misconfigure something..but. even using "fresh from the oven" configuration still just don't work. , here are the debug: Sending duplicate reply to client test port 1024 - ID: 4 Cleaning up request 2 ID 4 with timestamp +46 Ready to process requests. Framed-MTU = 1480 NAS-IP-Address = 192.168.12.130 NAS-Identifier = "ProCurve Switch 2650" User-Name = "testing" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1 NAS-Port-Type = Ethernet NAS-Port-Id = "1" Called-Station-Id = "00-1c-2e-73-85-00" Calling-Station-Id = "00-0a-e4-13-58-c7" Connect-Info = "CONNECT Ethernet 100Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "1" EAP-Message = 0x023a000c0174657374696e67 Message-Authenticator = 0x55d6fa8c198752bd6c62c351b234a57b +- entering group authorize ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop rlm_realm: No '@' in User-Name = "testing", looking up realm NULL rlm_realm: No such realm "NULL" ++[suffix] returns noop rlm_eap: EAP packet type response id 58 length 12 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound users: Matched entry testing at line 102 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop rlm_pap: Found existing Auth-Type, not changing it. ++[pap] returns noop rad_check_password: Found Auth-Type EAP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Replacing User-Password in config items with Cleartext-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!! Please update your configuration so that the "known good" !!! !!! clear text password is in Cleartext-Password, and not in User-Password. !!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! auth: type "EAP" +- entering group authenticate rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 2 NAS-Port-Type = Ethernet Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "101" EAP-Message = 0x013b001604101fee1ce904aea0659f790123de5bc761 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x9e1dcf679e26cbc870b5fae6a11d133d Finished request 3. Going to the next request Waking up in 4.9 seconds. Sending duplicate reply to client test port 1024 - ID: 4 <--- any clue what is it ? Cleaning up request 3 ID 4 with timestamp +56 Ready to process requests. from the wpa_supplicant's debug it broke right before EAP message method, so it (the supplicant) doesn't receive any MD5 Challenge from radius. anyone have same problem? really appreciate for any help Thank you Ryan Setiawan H -- DISCLAIMER: The contents of this email and attachments are confidential and may be subject to legal privilege. Any unauthorized use, copying, disclosure or communicating any part of it to others is strictly prohibited and may be unlawful. If you are not the intended recipient you must not use, copy, distribute or rely on this email and should please return it immediately to the sender or notify us and delete the email and any attachments from your system. We cannot accept liability for loss or damage resulting from computer viruses. The integrity of email across the Internet cannot be guaranteed and PT BANK NISP, Tbk. will not accept liability for any claims arising as a result of the use of this medium for transmissions by or to PT BANK NISP, Tbk.