Hi all, I am trying to configure FreeRadius 2.2.0. I am trying to test with the radtest utility. However, when I run radtest, on my radiusd server, I get the following error - "ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user". I know this is some issue with the authentication part. However, I have not been able to pinpoint the problem. Also, I haven't been able to find any relevant solutions on the web. I have just untarred the 2.2.0 tarball, and added just one line the users file: gokul Cleartext-Password:="abcde" Below is the output on the server and the client side: Server: Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 47080, id=238, length=75 User-Name = "gokul" User-Password = "abcde" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0xf92ae1fda2ea8f435d95c4a7294e1e55 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "gokul", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type REJECT # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> gokul attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 238 to 127.0.0.1 port 47080 Waking up in 4.9 seconds. Cleaning up request 0 ID 238 with timestamp +19 Ready to process requests. Client: shravan@ubuntu:~/freeradius-server-2.2.0/raddb$ sudo radtest gokul abcde localhost 0 testing123 [sudo] password for shravan: Sending Access-Request of id 238 to 127.0.0.1 port 1812 User-Name = "gokul" User-Password = "abcde" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=238, length=20 shravan@ubuntu:~/freeradius-server-2.2.0/raddb$ This is m first attempt at using FreeRadius, so please let me know if I have made any rookie mistakes. :) Thanks in advance. Shravan