hello. I use EAP-TLS authentication in freeRADIUS v2.1.10. Windows7 Computer authentication in EAP-TLS. 　Access-Request : User-Name = host/user 　Access-Accept : User-Name = user === degug message === rad_recv: Access-Request packet from host 192.168.1.102 port 4181, id=236, len gth=168 User-Name = "host/user" Cisco-AVPair = "ssid=tsunami2" NAS-IP-Address = 192.168.1.102 Called-Station-Id = "00409635c604" Calling-Station-Id = "0013ce2ce98c" NAS-Identifier = "AP340-35c604" NAS-Port = 37 Framed-MTU = 1400 State = 0xf63891eaf5349cad6a56444fd9199aec NAS-Port-Type = Wireless-802.11 Service-Type = Login-User EAP-Message = 0x020c00060d00 Message-Authenticator = 0xa007aa9e6ef0359c5b6b5edffe00ecbc === Sending Access-Accept of id 236 to 192.168.1.102 port 4181 Termination-Action = RADIUS-Request Session-Timeout = 1800 MS-MPPE-Recv-Key = 0x27a0af9b85abaccd7314693a3d18bcf32b04534287bbc839219d99cb 9500a6a3 MS-MPPE-Send-Key = 0x080829ecf636d5d7b8201accbf272cd5cf9fc4241a45dbf98fb2b580 139ada58 EAP-Message = 0x030c0004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "user" === hints file : === DEFAULT Prefix == "host/" === When Stripped-User-Name was set, this value is set to the User-Name attribute of the Access-Accept packet. Is this the wanted behaviour of v2.1.x? (changed from v1.1.x?) ========== Satoshi Hirabayashi