Hi All (warning, big/verbose email below), First of all, quick summary of setup: - Stock Debian Sarge - Clean freeradius 1.1.1 package downloaded yesterday. Built using standard dpkg-buildpackage from source. - Stock config files, with appropriate SQL bits uncommented for freeradius-mysql to work (see bottom of email). So, generally, it works fine - However, I'm experiencing a problem where whenever an Access-Reject is sent, the response is VERY slow (ie: >30 seconds). This happens if it's a formal Access-Reject via radgroupcheck or just wrong password or whatever (anything that would result in an Access-Reject). Access-Accept is instant/perfect, it's only any Access-Reject. And yes, reject_delay is on its standard setting of 1. Now, the bit that baffled me was I couldn't replicate it in debug mode (freeradius -X). At least, until I worked out it only occurs when freeradius is run normally. If you pass the -s flag (Do not spawn child processes), it works perfectly with a 1 second Access-Reject delay; if you set it to spawn child processes, it appears the reject only gets sent when the request times out (or something). See below for full output of a working and non-working example: Run without child processes: --------------Working---------------- /usr/sbin/freeradius -sfxxyz Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "clear" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded SQL sql: driver = "rlm_sql_mysql" sql: server = "localhost" sql: port = "" sql: login = "freeradius" sql: password = "xxxxxx" sql: radius_db = "freeradius" sql: acct_table = "radacct" sql: acct_table2 = "radacct" sql: authcheck_table = "radcheck" sql: authreply_table = "radreply" sql: groupcheck_table = "radgroupcheck" sql: groupreply_table = "radgroupreply" sql: usergroup_table = "usergroup" sql: nas_table = "nas" sql: dict_table = "dictionary" sql: sqltrace = no sql: sqltracefile = "/var/log/freeradius/sqltrace.sql" sql: readclients = yes sql: deletestalesessions = yes sql: num_sql_socks = 5 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: query_on_not_found = no sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'" sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: postauth_table = "radpostauth" sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to freeradius@localhost:/freeradius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): - generate_sql_clients rlm_sql (sql): Query: SELECT * FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=office.xxxx.com.au,shortname=office-nas,secret=xxxxxx rlm_sql (sql): Adding client 218.xxx.xxx.xxx (office-nas) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 218.xxx.xxx.xxx:2011, id=102, length=69 User-Name = "johnsmith@xxxx.com.au" User-Password = "xxxxxx" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: Looking up realm "xxxx.com.au" for User-Name = "johnsmith@xxxx.com.au" rlm_realm: No such realm "xxxx.com.au" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 radius_xlat: 'johnsmith@xxxx.com.au' rlm_sql (sql): sql_set_user escaped user --> 'johnsmith@xxxx.com.au' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'johnsmith@xxxx.com.au' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 3 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'johnsmith@xxxx.com.au' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'johnsmith@xxxx.com.au' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'johnsmith@xxxx.com.au' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 3 modcall[authorize]: module "sql" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Reject rad_check_password: Auth-Type = Reject, rejecting user auth: Failed to validate the user. Login incorrect: [johnsmith@xxxx.com.au/xxxxxx] (from client office-nas port 0) Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 102 to 218.xxx.xxx.xxx port 2011 Reply-Message := "Account Suspended" Waking up in 4 seconds... ------------------------------------- Run WITH child processes: --------------Broken----------------- /usr/sbin/freeradius -fxxyz Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/freeradius/proxy.conf Config: including file: /etc/freeradius/clients.conf Config: including file: /etc/freeradius/snmp.conf Config: including file: /etc/freeradius/eap.conf Config: including file: /etc/freeradius/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/freeradius" main: libdir = "/usr/lib/freeradius" main: radacctdir = "/var/log/freeradius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/freeradius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/var/run/freeradius/freeradius.pid" main: user = "freerad" main: group = "freerad" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib/freeradius Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "clear" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/freeradius/huntgroups" preprocess: hints = "/etc/freeradius/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded SQL sql: driver = "rlm_sql_mysql" sql: server = "localhost" sql: port = "" sql: login = "freeradius" sql: password = "xxxxxx" sql: radius_db = "freeradius" sql: acct_table = "radacct" sql: acct_table2 = "radacct" sql: authcheck_table = "radcheck" sql: authreply_table = "radreply" sql: groupcheck_table = "radgroupcheck" sql: groupreply_table = "radgroupreply" sql: usergroup_table = "usergroup" sql: nas_table = "nas" sql: dict_table = "dictionary" sql: sqltrace = no sql: sqltracefile = "/var/log/freeradius/sqltrace.sql" sql: readclients = yes sql: deletestalesessions = yes sql: num_sql_socks = 5 sql: sql_user_name = "%{User-Name}" sql: default_user_profile = "" sql: query_on_not_found = no sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id" sql: authorize_group_check_query = "SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" sql: authorize_group_reply_query = "SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress= '%{NAS-IP-Address}'" sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0')" sql: accounting_start_query = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'" sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')" sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE UserName='%{SQL-User-Name}'" sql: connect_failure_retry_delay = 60 sql: simul_count_query = "SELECT COUNT(*) FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" sql: postauth_table = "radpostauth" sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', '%{reply:Packet-Type}', NOW())" sql: safe-characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked rlm_sql (sql): Attempting to connect to freeradius@localhost:/freeradius rlm_sql (sql): starting 0 rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 rlm_sql_mysql: Starting connect to MySQL server for #0 rlm_sql (sql): Connected new DB handle, #0 rlm_sql (sql): starting 1 rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 rlm_sql_mysql: Starting connect to MySQL server for #1 rlm_sql (sql): Connected new DB handle, #1 rlm_sql (sql): starting 2 rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 rlm_sql_mysql: Starting connect to MySQL server for #2 rlm_sql (sql): Connected new DB handle, #2 rlm_sql (sql): starting 3 rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 rlm_sql_mysql: Starting connect to MySQL server for #3 rlm_sql (sql): Connected new DB handle, #3 rlm_sql (sql): starting 4 rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 rlm_sql_mysql: Starting connect to MySQL server for #4 rlm_sql (sql): Connected new DB handle, #4 rlm_sql (sql): - generate_sql_clients rlm_sql (sql): Query: SELECT * FROM nas rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Read entry nasname=office.xxxx.com.au,shortname=office-nas,secret=xxxxxx rlm_sql (sql): Adding client 218.xxx.xxx.xxx (office-nas) to clients list rlm_sql (sql): Released sql socket id: 4 Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded files files: usersfile = "/etc/freeradius/users" files: acctusersfile = "/etc/freeradius/acct_users" files: preproxy_usersfile = "/etc/freeradius/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded detail detail: detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "/etc/shadow" unix: group = "(null)" unix: radwtmp = "/var/log/freeradius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/freeradius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Initializing the thread pool... thread: start_servers = 5 thread: max_servers = 32 thread: min_spare_servers = 3 thread: max_spare_servers = 10 thread: max_requests_per_server = 0 thread: cleanup_delay = 5 Thread spawned new child 1. Total threads in pool: 1 Thread spawned new child 2. Total threads in pool: 2 Thread spawned new child 3. Total threads in pool: 3 Thread spawned new child 4. Total threads in pool: 4 Thread spawned new child 5. Total threads in pool: 5 Thread pool initialized Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. Thread 1 waiting to be assigned a request Thread 2 waiting to be assigned a request Thread 3 waiting to be assigned a request Thread 4 waiting to be assigned a request Thread 5 waiting to be assigned a request rad_recv: Access-Request packet from host 218.xxx.xxx.xxx:2006, id=101, length=69 --- Walking the entire request list --- Waking up in 31 seconds... Threads: total/active/spare threads = 5/0/5 Thread 1 got semaphore Thread 1 handling request 0, (1 handled so far) User-Name = "johnsmith@xxxx.com.au" User-Password = "xxxxxx" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: Looking up realm "xxxx.com.au" for User-Name = "johnsmith@xxxx.com.au" rlm_realm: No such realm "xxxx.com.au" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 radius_xlat: 'johnsmith@xxxx.com.au' rlm_sql (sql): sql_set_user escaped user --> 'johnsmith@xxxx.com.au' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radcheck WHERE Username = 'johnsmith@xxxx.com.au' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 3 radius_xlat: 'SELECT radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE usergroup.Username = 'johnsmith@xxxx.com.au' AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM radreply WHERE Username = 'johnsmith@xxxx.com.au' ORDER BY id' radius_xlat: 'SELECT radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE usergroup.Username = 'johnsmith@xxxx.com.au' AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released sql socket id: 3 modcall[authorize]: module "sql" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type Reject rad_check_password: Auth-Type = Reject, rejecting user auth: Failed to validate the user. Login incorrect: [johnsmith@xxxx.com.au/xxxxxx] (from client office-nas port 0) Delaying request 0 for 1 seconds Finished request 0 Going to the next request Thread 1 waiting to be assigned a request <<Nothing happens for ~30 seconds here>> --- Walking the entire request list --- Sending Access-Reject of id 101 to 218.xxx.xxx.xxx port 2006 Reply-Message := "Account Suspended" Cleaning up request 0 ID 101 with timestamp 442253f9 Nothing to do. Sleeping until we see a request. ------------------------------------- -----------------Config-------------- cat /etc/freeradius/radiusd.conf | grep -v '#' prefix = /usr exec_prefix = /usr sysconfdir = /etc localstatedir = /var sbindir = ${exec_prefix}/sbin logdir = /var/log/freeradius raddbdir = /etc/freeradius radacctdir = ${logdir}/radacct confdir = ${raddbdir} run_dir = ${localstatedir}/run/freeradius log_file = ${logdir}/radius.log libdir = /usr/lib/freeradius pidfile = ${run_dir}/freeradius.pid user = freerad group = freerad max_request_time = 30 delete_blocked_requests = no cleanup_delay = 5 max_requests = 1024 bind_address = * port = 0 hostname_lookups = no allow_core_dumps = no regular_expressions = yes extended_expressions = yes log_stripped_names = no log_auth = yes log_auth_badpass = yes log_auth_goodpass = no usercollide = no lower_user = no lower_pass = no nospace_user = no nospace_pass = no checkrad = ${sbindir}/checkrad security { max_attributes = 200 reject_delay = 1 status_server = no } proxy_requests = yes $INCLUDE ${confdir}/proxy.conf $INCLUDE ${confdir}/clients.conf snmp = no $INCLUDE ${confdir}/snmp.conf thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 } modules { pap { encryption_scheme = clear } chap { authtype = CHAP } pam { pam_auth = radiusd } unix { cache = no cache_reload = 600 shadow = /etc/shadow radwtmp = ${logdir}/radwtmp } $INCLUDE ${confdir}/eap.conf mschap { authtype = MS-CHAP } ldap { server = "ldap.your.domain" basedn = "o=My Org,c=UA" filter = "(uid=%{Stripped-User-Name:-%{User-Name}})" start_tls = no access_attr = "dialupAccess" dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_connections_number = 5 timeout = 4 timelimit = 3 net_timeout = 1 } realm IPASS { format = prefix delimiter = "/" ignore_default = no ignore_null = no } realm suffix { format = suffix delimiter = "@" ignore_default = no ignore_null = no } realm realmpercent { format = suffix delimiter = "%" ignore_default = no ignore_null = no } realm ntdomain { format = prefix delimiter = "\\" ignore_default = no ignore_null = no } checkval { item-name = Calling-Station-Id check-name = Calling-Station-Id data-type = string } preprocess { huntgroups = ${confdir}/huntgroups hints = ${confdir}/hints with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no } files { usersfile = ${confdir}/users acctusersfile = ${confdir}/acct_users preproxy_usersfile = ${confdir}/preproxy_users compat = no } detail { detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d detailperm = 0600 } acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } $INCLUDE ${confdir}/sql.conf radutmp { filename = ${logdir}/radutmp username = %{User-Name} case_sensitive = yes check_with_nas = yes perm = 0600 callerid = "yes" } radutmp sradutmp { filename = ${logdir}/sradutmp perm = 0644 callerid = "no" } attr_filter { attrsfile = ${confdir}/attrs } counter daily { filename = ${raddbdir}/db.daily key = User-Name count-attribute = Acct-Session-Time reset = daily counter-name = Daily-Session-Time check-name = Max-Daily-Session allowed-servicetype = Framed-User cache-size = 5000 } sqlcounter dailycounter { counter-name = Daily-Session-Time check-name = Max-Daily-Session sqlmod-inst = sql key = User-Name reset = daily query = "SELECT SUM(AcctSessionTime - \ GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ FROM radacct WHERE UserName='%{%k}' AND \ UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } sqlcounter monthlycounter { counter-name = Monthly-Session-Time check-name = Max-Monthly-Session sqlmod-inst = sql key = User-Name reset = monthly query = "SELECT SUM(AcctSessionTime - \ GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \ FROM radacct WHERE UserName='%{%k}' AND \ UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'" } always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } expr { } digest { } exec { wait = yes input_pairs = request } exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = request output_pairs = reply } ippool main_pool { range-start = 192.168.1.1 range-stop = 192.168.3.254 netmask = 255.255.255.0 cache-size = 800 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = no maximum-timeout = 0 } } instantiate { exec expr } authorize { preprocess chap mschap suffix eap sql } authenticate { Auth-Type PAP { pap } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } eap } preacct { preprocess acct_unique suffix files } accounting { detail unix radutmp sql } session { sql } post-auth { } pre-proxy { } post-proxy { eap } ------------------------------------- Any suggestions/help as to what would be causing this very slow reject time (which breaks most clients as they time out) would be most welcome. Thanks, Fenn.