Odd issue with EAP-TTLS... Tunneled challenge invalid?

25 Aug 2015

      Hi,

One of our sites has run into an issue where they are trying to connect to their server with EAP-TTLS. They've used rad_eap_test on the same machine just to test the connection locally and this is the output log. I'm stumped... I've never seen this error before. Any suggestions will be most appreciated! :-)

-- debug log follows --

freeradius -fxx -l stdout
Copyright (C) 1999-2015 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/dhcp
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/linelog
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/accounting
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/abfab-tls
including configuration file /etc/freeradius/sites-enabled/abfab-tr-idp
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/channel_bindings
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 1024
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dynamic = yes
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 realm muj.prostor {
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  	default_community = "none"
  	rp_realm = "none"
  	trust_router = "none"
  	tr_port = 0
  }
Warning: dh_check failed with 8
: the g value is not a generator
  # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  	default_community = "apc.moonshot.ja.net"
  	rp_realm = "painless-security.com"
  	trust_router = "localhost"
  	tr_port = 0
  }
  # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  	default_community = "none"
  	rp_realm = "none"
  	trust_router = "none"
  	tr_port = 0
  }
  # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  	default_community = "none"
  	rp_realm = "none"
  	trust_router = "none"
  	tr_port = 0
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_exec
  # Instantiating module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/freeradius/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
  # Loaded module rlm_radutmp
  # Instantiating module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
  	default_eap_type = "ttls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	mod_accounting_username_bug = no
  	max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
   	challenge = "Password: "
   	auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   }
   tls-config tls-common {
   	rsa_key_exchange = no
   	dh_key_exchange = yes
   	rsa_key_length = 512
   	dh_key_length = 512
   	verify_depth = 0
   	ca_path = "/etc/freeradius/certs"
   	pem_file_type = yes
   	private_key_file = "/etc/freeradius/certs/server.pem"
   	certificate_file = "/etc/freeradius/certs/server.pem"
   	ca_file = "/etc/freeradius/certs/ca.pem"
   	private_key_password = <<< secret >>>
   	dh_file = "/etc/freeradius/certs/dh"
   	fragment_size = 1024
   	include_length = yes
   	check_crl = no
   	cipher_list = "DEFAULT"
   	ecdh_curve = "prime256v1"
    cache {
    	enable = yes
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "md5"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	virtual_server = "inner-tunnel"
   	include_length = yes
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_method = "mschapv2"
   	copy_request_to_tunnel = no
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "inner-tunnel"
   	soh = no
   	require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = no
   }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  }
  # Loaded module rlm_detail
  # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Instantiating module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file /etc/freeradius/mods-enabled/replicate
  # Instantiating module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Instantiating module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
  files {
  	filename = "/etc/freeradius/mods-config/files/authorize"
  	usersfile = "/etc/freeradius/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  	compat = "cistron"
  }
reading pairlist file /etc/freeradius/mods-config/files/authorize
[/etc/freeradius/mods-config/files/authorize]:1 Cistron compatibility checks for entry testuser ...
[/etc/freeradius/mods-config/files/authorize]:184 Cistron compatibility checks for entry DEFAULT ...
[/etc/freeradius/mods-config/files/authorize]:191 Cistron compatibility checks for entry DEFAULT ...
[/etc/freeradius/mods-config/files/authorize]:197 Cistron compatibility checks for entry DEFAULT ...
reading pairlist file /etc/freeradius/mods-config/files/authorize
[/etc/freeradius/mods-config/files/authorize]:1 Cistron compatibility checks for entry testuser ...
[/etc/freeradius/mods-config/files/authorize]:184 Cistron compatibility checks for entry DEFAULT ...
[/etc/freeradius/mods-config/files/authorize]:191 Cistron compatibility checks for entry DEFAULT ...
[/etc/freeradius/mods-config/files/authorize]:197 Cistron compatibility checks for entry DEFAULT ...
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server abfab-idp { # from file /etc/freeradius/sites-enabled/abfab-tr-idp
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
} # server abfab-idp
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server channel_bindings { # from file /etc/freeradius/sites-enabled/channel_bindings
 # Loading authorize {...}
} # server channel_bindings
/etc/freeradius/policy.d/abfab-tr[29] Please change %{gss-acceptor-host-name}} to &gss-acceptor-host-name}
 thread pool {
 	start_servers = 5
 	max_servers = 32
 	min_spare_servers = 3
 	max_spare_servers = 10
 	max_requests_per_server = 0
 	cleanup_delay = 5
 	max_queue_size = 65536
 	auto_limit_acct = no
 }
Thread spawned new child 1. Total threads in pool: 1
Thread spawned new child 2. Total threads in pool: 2
Thread spawned new child 3. Total threads in pool: 3
Thread spawned new child 4. Total threads in pool: 4
Thread spawned new child 5. Total threads in pool: 5
Thread pool initialized
radiusd: #### Opening IP addresses and Ports ####
listen {
 	type = "auth"
 	virtual_server = "abfab-idp"
 	ipaddr = *
 	port = 2083
 	proto = "tcp"
  tls {
  	rsa_key_exchange = no
  	dh_key_exchange = yes
  	rsa_key_length = 512
  	dh_key_length = 512
  	verify_depth = 0
  	ca_path = "/etc/freeradius/certs"
  	pem_file_type = yes
  	private_key_file = "/etc/freeradius/certs/server.key"
  	certificate_file = "/etc/freeradius/certs/server.pem"
  	ca_file = "/etc/freeradius/certs/ca.pem"
  	private_key_password = <<< secret >>>
  	psk_query = "%{psksql:select hex(key) from psk_keys where keyid = '%{TLS-PSK-Identity}'}"
  	dh_file = "/etc/freeradius/certs/dh"
  	fragment_size = 8192
  	include_length = yes
  	check_crl = no
  	cipher_list = "DEFAULT"
  	require_client_cert = yes
  	ecdh_curve = "prime256v1"
   cache {
   	enable = no
   	lifetime = 24
   	max_entries = 255
   }
   verify {
   }
   ocsp {
   	enable = no
   	override_cert_url = no
   	use_nonce = yes
   	timeout = 0
   	softfail = no
   }
  }
Thread 5 waiting to be assigned a request
Thread 4 waiting to be assigned a request
Thread 3 waiting to be assigned a request
Thread 1 waiting to be assigned a request
Thread 2 waiting to be assigned a request
 	clients = "radsec-abfab"
  client default {
  	ipaddr = 0.0.0.0/0
  	require_message_authenticator = no
  	proto = "tls"
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
  }
}
listen {
  	type = "auth"
  	ipaddr = 127.0.0.1
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth proto tcp address * port 2083 (TLS) bound to server abfab-idp
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 37846
Ready to process requests
Threads: total/active/spare threads = 5/0/5
Waking up in 0.3 seconds.
Thread 5 got semaphore
Thread 5 handling request 0, (1 handled so far)
(0) Received Access-Request Id 0 from 127.0.0.1:56718 to 127.0.0.1:1812 length 151
(0)   User-Name = 'testuser@muj.prostor'
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = '70-6F-6C-69-73-68'
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = 'rad_eap_test + eapol_test'
(0)   EAP-Message = 0x02000019017465737475736572406d756a2e70726f73746f72
(0)   Message-Authenticator = 0xed71a7d4f2b5822548f6f2f3a6a5d07e
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (!&User-Name) {
(0)       if (!&User-Name)  -> FALSE
(0)       if (&User-Name =~ / /) {
(0)       if (&User-Name =~ / /)  -> FALSE
(0)       if (&User-Name =~ /@.*@/ ) {
(0)       if (&User-Name =~ /@.*@/ )  -> FALSE
(0)       if (&User-Name =~ /\.\./ ) {
(0)       if (&User-Name =~ /\.\./ )  -> FALSE
(0)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)       if (&User-Name =~ /\.$/)  {
(0)       if (&User-Name =~ /\.$/)   -> FALSE
(0)       if (&User-Name =~ /@\./)  {
(0)       if (&User-Name =~ /@\./)   -> FALSE
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "muj.prostor" for User-Name = "testuser@muj.prostor"
(0) suffix: Found realm "muj.prostor"
(0) suffix: Adding Stripped-User-Name = "testuser"
(0) suffix: Adding Realm = "muj.prostor"
(0) suffix: Authentication realm is LOCAL
(0)     [suffix] = ok
(0) eap: Peer sent code Response (2) ID 0 length 25
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent method Identity (1)
(0) eap: Calling eap_ttls to process EAP data
(0) eap_ttls: Flushing SSL sessions (of #0)
(0) eap_ttls: Initiate
(0) eap_ttls: Start returned 1
(0) eap: EAP session adding &reply:State = 0x46d103e846d0160f
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:56718 length 64
(0)   EAP-Message = 0x010100061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x46d103e846d0160f61e71b3cd5f9b6f6
(0) Finished request
Thread 5 waiting to be assigned a request
Waking up in 0.3 seconds.
Thread 4 got semaphore
Thread 4 handling request 1, (1 handled so far)
(1) Received Access-Request Id 1 from 127.0.0.1:56718 to 127.0.0.1:1812 length 439
(1)   User-Name = 'testuser@muj.prostor'
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = '70-6F-6C-69-73-68'
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = 'rad_eap_test + eapol_test'
(1)   EAP-Message = 0x020101251500160301011a01000116030355dc61f58c4c31193cddd93c26520c7eddc459e4e09204c951b419d67933a97b000082c030c02cc028c024c014c00a00a3009f006b006a0039003800880087c032c02ec02ac026c00fc005009d003d00350084c012c00800160013c00dc003000ac02fc02bc0
(1)   State = 0x46d103e846d0160f61e71b3cd5f9b6f6
(1)   Message-Authenticator = 0xc80ae9487430191ab0f2a75c134138ff
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (!&User-Name) {
(1)       if (!&User-Name)  -> FALSE
(1)       if (&User-Name =~ / /) {
(1)       if (&User-Name =~ / /)  -> FALSE
(1)       if (&User-Name =~ /@.*@/ ) {
(1)       if (&User-Name =~ /@.*@/ )  -> FALSE
(1)       if (&User-Name =~ /\.\./ ) {
(1)       if (&User-Name =~ /\.\./ )  -> FALSE
(1)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)       if (&User-Name =~ /\.$/)  {
(1)       if (&User-Name =~ /\.$/)   -> FALSE
(1)       if (&User-Name =~ /@\./)  {
(1)       if (&User-Name =~ /@\./)   -> FALSE
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "muj.prostor" for User-Name = "testuser@muj.prostor"
(1) suffix: Found realm "muj.prostor"
(1) suffix: Adding Stripped-User-Name = "testuser"
(1) suffix: Adding Realm = "muj.prostor"
(1) suffix: Authentication realm is LOCAL
(1)     [suffix] = ok
(1) eap: Peer sent code Response (2) ID 1 length 293
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x46d103e846d0160f
(1) eap: Finished EAP session with state 0x46d103e846d0160f
(1) eap: Previous EAP request found for state 0x46d103e846d0160f, released from the list
(1) eap: Peer sent method TTLS (21)
(1) eap: EAP TTLS (21)
(1) eap: Calling eap_ttls to process EAP data
(1) eap_ttls: Authenticate
(1) eap_ttls: processing EAP-TLS
(1) eap_ttls: eaptls_verify returned 7
(1) eap_ttls: Done initial handshake
(1) eap_ttls: (other): before/accept initialization
(1) eap_ttls: TLS_accept: before/accept initialization
(1) eap_ttls: <<< Unknown TLS version [length 011a]
(1) eap_ttls: TLS_accept: SSLv3 read client hello A
(1) eap_ttls: >>> Unknown TLS version [length 005e]
(1) eap_ttls: TLS_accept: SSLv3 write server hello A
(1) eap_ttls: >>> Unknown TLS version [length 08d0]
(1) eap_ttls: TLS_accept: SSLv3 write certificate A
(1) eap_ttls: >>> Unknown TLS version [length 014d]
(1) eap_ttls: TLS_accept: SSLv3 write key exchange A
(1) eap_ttls: >>> Unknown TLS version [length 0004]
(1) eap_ttls: TLS_accept: SSLv3 write server done A
(1) eap_ttls: TLS_accept: SSLv3 flush data
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
(1) eap_ttls: TLS_accept: Need to read more data: SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
(1) eap_ttls: eaptls_process returned 13
(1) eap: EAP session adding &reply:State = 0x46d103e847d3160f
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:56718 length 1068
Waking up in 0.3 seconds.
Thread 3 got semaphore
Thread 3 handling request 2, (1 handled so far)
(2) Received Access-Request Id 2 from 127.0.0.1:56718 to 127.0.0.1:1812 length 150
(2)   User-Name = 'testuser@muj.prostor'
(2)   NAS-IP-Address = 127.0.0.1
(2)   Calling-Station-Id = '70-6F-6C-69-73-68'
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = 'rad_eap_test + eapol_test'
(2)   EAP-Message = 0x020200061500
(2)   State = 0x46d103e847d3160f61e71b3cd5f9b6f6
(2)   Message-Authenticator = 0x84302ab07957fd907f96539016886952
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (!&User-Name) {
(2)       if (!&User-Name)  -> FALSE
(2)       if (&User-Name =~ / /) {
(2)       if (&User-Name =~ / /)  -> FALSE
(2)       if (&User-Name =~ /@.*@/ ) {
(2)       if (&User-Name =~ /@.*@/ )  -> FALSE
(2)       if (&User-Name =~ /\.\./ ) {
(2)       if (&User-Name =~ /\.\./ )  -> FALSE
(2)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)       if (&User-Name =~ /\.$/)  {
(2)       if (&User-Name =~ /\.$/)   -> FALSE
(2)       if (&User-Name =~ /@\./)  {
(2)       if (&User-Name =~ /@\./)   -> FALSE
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "muj.prostor" for User-Name = "testuser@muj.prostor"
(2) suffix: Found realm "muj.prostor"
(2) suffix: Adding Stripped-User-Name = "testuser"
(2) suffix: Adding Realm = "muj.prostor"
(2) suffix: Authentication realm is LOCAL
(2)     [suffix] = ok
(2) eap: Peer sent code Response (2) ID 2 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x46d103e847d3160f
(2) eap: Finished EAP session with state 0x46d103e847d3160f
(2) eap: Previous EAP request found for state 0x46d103e847d3160f, released from the list
(2) eap: Peer sent method TTLS (21)
(2) eap: EAP TTLS (21)
(2) eap: Calling eap_ttls to process EAP data
(2) eap_ttls: Authenticate
(2) eap_ttls: processing EAP-TLS
(2) eap_ttls: Received TLS ACK
(2) eap_ttls: Received TLS ACK
(2) eap_ttls: ACK handshake fragment handler
(2) eap_ttls: eaptls_verify returned 1
(2) eap_ttls: eaptls_process returned 13
(2) eap: EAP session adding &reply:State = 0x46d103e844d2160f
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:56718 length 1068
(2)   EAP-Message = 0x010303ec15c000000a93e2c34c916a4923a0a7cb7d119c2dd6e88d64047881f0345c6a783e137e4ad1b43a5d9ab52cc0c73125f99bfef62dbf29ad4bdd1cf290f17fb81e3561fee9cd6dd01ee4bec7dc5e0a41c8556d075599629772825b591745e91a70039acdd4ea1b08bddefeb11003f1d66b8f4faa
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x46d103e844d2160f61e71b3cd5f9b6f6
(2) Finished request
Thread 3 waiting to be assigned a request
Waking up in 0.3 seconds.
Thread 1 got semaphore
Thread 1 handling request 3, (1 handled so far)
(3) Received Access-Request Id 3 from 127.0.0.1:56718 to 127.0.0.1:1812 length 150
(3)   User-Name = 'testuser@muj.prostor'
(3)   NAS-IP-Address = 127.0.0.1
(3)   Calling-Station-Id = '70-6F-6C-69-73-68'
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = 'rad_eap_test + eapol_test'
(3)   EAP-Message = 0x020300061500
(3)   State = 0x46d103e844d2160f61e71b3cd5f9b6f6
(3)   Message-Authenticator = 0x11e45ebcedd7f01a46e41f4b533fa08e
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (!&User-Name) {
(3)       if (!&User-Name)  -> FALSE
(3)       if (&User-Name =~ / /) {
(3)       if (&User-Name =~ / /)  -> FALSE
(3)       if (&User-Name =~ /@.*@/ ) {
(3)       if (&User-Name =~ /@.*@/ )  -> FALSE
(3)       if (&User-Name =~ /\.\./ ) {
(3)       if (&User-Name =~ /\.\./ )  -> FALSE
(3)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)       if (&User-Name =~ /\.$/)  {
(3)       if (&User-Name =~ /\.$/)   -> FALSE
(3)       if (&User-Name =~ /@\./)  {
(3)       if (&User-Name =~ /@\./)   -> FALSE
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "muj.prostor" for User-Name = "testuser@muj.prostor"
(3) suffix: Found realm "muj.prostor"
(3) suffix: Adding Stripped-User-Name = "testuser"
(3) suffix: Adding Realm = "muj.prostor"
(3) suffix: Authentication realm is LOCAL
(3)     [suffix] = ok
(3) eap: Peer sent code Response (2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x46d103e844d2160f
(3) eap: Finished EAP session with state 0x46d103e844d2160f
(3) eap: Previous EAP request found for state 0x46d103e844d2160f, released from the list
(3) eap: Peer sent method TTLS (21)
(3) eap: EAP TTLS (21)
(3) eap: Calling eap_ttls to process EAP data
(3) eap_ttls: Authenticate
(3) eap_ttls: processing EAP-TLS
(3) eap_ttls: Received TLS ACK
(3) eap_ttls: Received TLS ACK
(3) eap_ttls: ACK handshake fragment handler
(3) eap_ttls: eaptls_verify returned 1
(3) eap_ttls: eaptls_process returned 13
(3) eap: EAP session adding &reply:State = 0x46d103e845d5160f
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:56718 length 791
(3)   EAP-Message = 0x010402d9158000000a93696361746520417574686f72697479820900aa79031e627d0b9b300c0603551d13040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e636f6d2f6578616d706c655f63612e63726c300d06092a864886f70d010105
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x46d103e845d5160f61e71b3cd5f9b6f6
(3) Finished request
Thread 1 waiting to be assigned a request
(1)   EAP-Message = 0x010203ec15c000000a93160303005e0200005a030355dc61f59ac52305bad83957a2594d506564f4919ded134816948fc39c4652072033a218d505462c178a405e16e5bed8f0817d9f80e78b6093836ce2edb7050e38c030000012ff01000100000b000403000102000f00010116030308d00b0008cc00
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x46d103e847d3160f61e71b3cd5f9b6f6
(1) Finished request
Thread 4 waiting to be assigned a request
Waking up in 0.3 seconds.
Thread 2 got semaphore
Thread 2 handling request 4, (1 handled so far)
(4) Received Access-Request Id 4 from 127.0.0.1:56718 to 127.0.0.1:1812 length 276
(4)   User-Name = 'testuser@muj.prostor'
(4)   NAS-IP-Address = 127.0.0.1
(4)   Calling-Station-Id = '70-6F-6C-69-73-68'
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = 'rad_eap_test + eapol_test'
(4)   EAP-Message = 0x020400841500160303004610000042410481a878870091dbc32381894b3e7fba2cb9a93e7b008584396f1cac88db37617f18ba55919a1b9d1015b6029a2eef48a4d927a1db72b840799cc11aee416b97fc14030300010116030300289bb9f986e5ca653f81b6ba7f28e6ee93e19764d9132d5ebcc40fee
(4)   State = 0x46d103e845d5160f61e71b3cd5f9b6f6
(4)   Message-Authenticator = 0x92430f432b19026a1bbeba45a11720f2
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (!&User-Name) {
(4)       if (!&User-Name)  -> FALSE
(4)       if (&User-Name =~ / /) {
(4)       if (&User-Name =~ / /)  -> FALSE
(4)       if (&User-Name =~ /@.*@/ ) {
(4)       if (&User-Name =~ /@.*@/ )  -> FALSE
(4)       if (&User-Name =~ /\.\./ ) {
(4)       if (&User-Name =~ /\.\./ )  -> FALSE
(4)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)       if (&User-Name =~ /\.$/)  {
(4)       if (&User-Name =~ /\.$/)   -> FALSE
(4)       if (&User-Name =~ /@\./)  {
(4)       if (&User-Name =~ /@\./)   -> FALSE
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "muj.prostor" for User-Name = "testuser@muj.prostor"
(4) suffix: Found realm "muj.prostor"
(4) suffix: Adding Stripped-User-Name = "testuser"
(4) suffix: Adding Realm = "muj.prostor"
(4) suffix: Authentication realm is LOCAL
(4)     [suffix] = ok
(4) eap: Peer sent code Response (2) ID 4 length 132
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x46d103e845d5160f
(4) eap: Finished EAP session with state 0x46d103e845d5160f
(4) eap: Previous EAP request found for state 0x46d103e845d5160f, released from the list
(4) eap: Peer sent method TTLS (21)
(4) eap: EAP TTLS (21)
(4) eap: Calling eap_ttls to process EAP data
(4) eap_ttls: Authenticate
(4) eap_ttls: processing EAP-TLS
(4) eap_ttls: eaptls_verify returned 7
(4) eap_ttls: Done initial handshake
(4) eap_ttls: <<< Unknown TLS version [length 0046]
(4) eap_ttls: TLS_accept: SSLv3 read client key exchange A
(4) eap_ttls: <<< Unknown TLS version [length 0001]
(4) eap_ttls: <<< Unknown TLS version [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 read finished A
(4) eap_ttls: >>> Unknown TLS version [length 0001]
(4) eap_ttls: TLS_accept: SSLv3 write change cipher spec A
(4) eap_ttls: >>> Unknown TLS version [length 0010]
(4) eap_ttls: TLS_accept: SSLv3 write finished A
(4) eap_ttls: TLS_accept: SSLv3 flush data
  SSL: adding session 33a218d505462c178a405e16e5bed8f0817d9f80e78b6093836ce2edb7050e38 to cache
(4) eap_ttls: (other): SSL negotiation finished successfully
SSL Connection Established
(4) eap_ttls: eaptls_process returned 13
(4) eap: EAP session adding &reply:State = 0x46d103e842d4160f
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:56718 length 119
(4)   EAP-Message = 0x0105003d1580000000331403030001011603030028d2f96f0244ac87d5119f22c6ae3674bc26cad6b86e55ba9bcf36306e4fd27a4c435176c40bac962d
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x46d103e842d4160f61e71b3cd5f9b6f6
(4) Finished request
Thread 2 waiting to be assigned a request
Waking up in 0.3 seconds.
Thread 5 got semaphore
Thread 5 handling request 5, (2 handled so far)
(5) Received Access-Request Id 5 from 127.0.0.1:56718 to 127.0.0.1:1812 length 299
(5)   User-Name = 'testuser@muj.prostor'
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = '70-6F-6C-69-73-68'
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Connect-Info = 'rad_eap_test + eapol_test'
(5)   EAP-Message = 0x0205009b150017030300909bb9f986e5ca65406ad6d8a5567e4030dd6799f0d9e62358ccb7757c9dc4e604195a0f82566daf76417338606b1bd876e23263daa71a931ea157e4a1f2d869b4a1c41b135062418f2d930e5f670f351de2b29881ad79287339240d86db4e56e2c1e583df8e12f998e33ebdef
(5)   State = 0x46d103e842d4160f61e71b3cd5f9b6f6
(5)   Message-Authenticator = 0x06a44849163989b16f3b13a91e6847b9
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (!&User-Name) {
(5)       if (!&User-Name)  -> FALSE
(5)       if (&User-Name =~ / /) {
(5)       if (&User-Name =~ / /)  -> FALSE
(5)       if (&User-Name =~ /@.*@/ ) {
(5)       if (&User-Name =~ /@.*@/ )  -> FALSE
(5)       if (&User-Name =~ /\.\./ ) {
(5)       if (&User-Name =~ /\.\./ )  -> FALSE
(5)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)       if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)       if (&User-Name =~ /\.$/)  {
(5)       if (&User-Name =~ /\.$/)   -> FALSE
(5)       if (&User-Name =~ /@\./)  {
(5)       if (&User-Name =~ /@\./)   -> FALSE
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "muj.prostor" for User-Name = "testuser@muj.prostor"
(5) suffix: Found realm "muj.prostor"
(5) suffix: Adding Stripped-User-Name = "testuser"
(5) suffix: Adding Realm = "muj.prostor"
(5) suffix: Authentication realm is LOCAL
(5)     [suffix] = ok
(5) eap: Peer sent code Response (2) ID 5 length 155
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x46d103e842d4160f
(5) eap: Finished EAP session with state 0x46d103e842d4160f
(5) eap: Previous EAP request found for state 0x46d103e842d4160f, released from the list
(5) eap: Peer sent method TTLS (21)
(5) eap: EAP TTLS (21)
(5) eap: Calling eap_ttls to process EAP data
(5) eap_ttls: Authenticate
(5) eap_ttls: processing EAP-TLS
(5) eap_ttls: eaptls_verify returned 7
(5) eap_ttls: Done initial handshake
(5) eap_ttls: eaptls_process returned 7
(5) eap_ttls: Session established.  Proceeding to decode tunneled attributes
(5) eap_ttls: Tunneled challenge is incorrect
  SSL: Removing session 33a218d505462c178a405e16e5bed8f0817d9f80e78b6093836ce2edb7050e38 from the cache
(5) eap: ERROR: Failed continuing EAP TTLS (21) session. EAP sub-module failed
(5) eap: Failed in EAP select
(5)     [eap] = invalid
(5)   } # authenticate = invalid
(5) Failed to authenticate the user
(5) Using Post-Auth-Type Reject
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   Post-Auth-Type REJECT {
(5) attr_filter.access_reject: EXPAND %{User-Name}
(5) attr_filter.access_reject:    --> testuser@muj.prostor
(5) attr_filter.access_reject: Matched entry DEFAULT at line 18
(5)     [attr_filter.access_reject] = updated
(5) eap: Reply already contained an EAP-Message, not inserting EAP-Failure
(5)     [eap] = noop
(5)     policy remove_reply_message_if_eap {
(5)       if (&reply:EAP-Message && &reply:Reply-Message) {
(5)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(5)       else {
(5)         [noop] = noop
(5)       } # else = noop
(5)     } # policy remove_reply_message_if_eap = noop
(5)   } # Post-Auth-Type REJECT = updated
(5) Delaying response for 1.000000 seconds
Thread 5 waiting to be assigned a request
Waking up in 0.6 seconds.
(5) Sending delayed response
(5) Sent Access-Reject Id 5 from 127.0.0.1:1812 to 127.0.0.1:56718 length 44
(5)   EAP-Message = 0x04050004
(5)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) <done>: Cleaning up request packet ID 0 with timestamp +14
(1) <done>: Cleaning up request packet ID 1 with timestamp +14
(2) <done>: Cleaning up request packet ID 2 with timestamp +14
(3) <done>: Cleaning up request packet ID 3 with timestamp +14
(4) <done>: Cleaning up request packet ID 4 with timestamp +14
(5) Cleaning up request packet ID 5 with timestamp +14
Ready to process requests

-- debug log ends --

Thank you :-)

Stefan Paetow
Moonshot Industry & Research Liaison Coordinator

t: +44 (0)1235 822 125
gpg: 0x3FCE5142
xmpp: stefanp@jabber.dev.ja.net
skype: stefan.paetow.janet
Lumen House, Library Avenue, Harwell Oxford, Didcot, OX11 0SG

jisc.ac.uk

Jisc is a registered charity (number 1149740) and a company limited by guarantee which is registered in England under Company No. 5747339, VAT No. GB 197 0632 86. Jisc’s registered office is: One Castlepark, Tower Hill, Bristol, BS2 0JA. T 0203 697 5800.
Jisc Collections and Janet Ltd. is a wholly owned Jisc subsidiary and a company limited by guarantee which is registered in England under Company No. number 2881024, VAT No. GB 197 0632 86. The registered office is: Lumen House, Library Avenue, Harwell, Didcot, Oxfordshire, OX11 0SG. T 01235 822200.

Stefan Paetow

Matthew Newton

Stefan Paetow

tags

participants (2)