String expansion of attributes value from database
Hello All, Is it possible to have similar functionality in a database stored reply item as with users file? in users file: user1 Cleartext-Password := “super_secret" Alc-Subsc-ID-Str := "%{Alc-Client-Hardware-Addr}", Alc-Subsc-Prof-Str := "sub_profile_1", Alc-SLA-Prof-Str := “sla_profile_1" The above works and the %{Alc-Client-Hardware-Addr} gets expanded to a correct mac address. However when the following is used in database: +----+----------------+--------------------+----+-------------------------------+ | id | groupname | attribute | op | value | +----+----------------+--------------------+----+-------------------------------+ | 1 | profile_1 | Alc-Subsc-ID-Str | := | "%{Alc-Client-Hardware-Addr}" | | 2 | profile_1 | Alc-Subsc-Prof-Str | := | sub_profile_1 | | 3 | profile_1 | Alc-SLA-Prof-Str | := | sla_profile_1 | +----+----------------+--------------------+----+-------------------------------+ The value of Alc-Subsc-ID-Str attribute is returned as is, without expansion. The comments in the sql module say that the sql should mirror the users file in functionality so i’m assuming i’m missing something ;) Can you advice please? Regards, Kris
On 12 Jul 2016, at 05:17, Krzysztof Grobelak <krzysztof.grobelak@enet.ie> wrote:
Hello All,
Is it possible to have similar functionality in a database stored reply item as with users file?
in users file:
user1 Cleartext-Password := “super_secret" Alc-Subsc-ID-Str := "%{Alc-Client-Hardware-Addr}", Alc-Subsc-Prof-Str := "sub_profile_1", Alc-SLA-Prof-Str := “sla_profile_1"
The above works and the %{Alc-Client-Hardware-Addr} gets expanded to a correct mac address.
However when the following is used in database:
+----+----------------+--------------------+----+-------------------------------+ | id | groupname | attribute | op | value | +----+----------------+--------------------+----+-------------------------------+ | 1 | profile_1 | Alc-Subsc-ID-Str | := | "%{Alc-Client-Hardware-Addr}" | | 2 | profile_1 | Alc-Subsc-Prof-Str | := | sub_profile_1 | | 3 | profile_1 | Alc-SLA-Prof-Str | := | sla_profile_1 | +----+----------------+--------------------+----+-------------------------------+
The value of Alc-Subsc-ID-Str attribute is returned as is, without expansion.
The comments in the sql module say that the sql should mirror the users file in functionality so i’m assuming i’m missing something ;)
Can you advice please?
In v3.1.x you can use %{xlat:<value>} But yeah, there should be a quoting column or something I guess. Fell free to submit patches against v4.0.x. -Arran Arran Cudbard-Bell <a.cudbardb@freeradius.org> FreeRADIUS Development Team FD31 3077 42EC 7FCD 32FE 5EE2 56CF 27F9 30A8 CAA2
Hello Arran, Thanks for the response.
In v3.1.x you can use %{xlat:<value>}
Could you explain a little bit more how to use this feature? I’m unclear how to apply this to the value returned from db. I suspect i need to do it in post-auth section. I know that I can do the following: post-auth { update reply { Alc-Subsc-ID-Str := "%{Alc-Client-Hardware-Addr}” } } And this works but this will update all the reply packet for all successful authentication responses. And i would like to be able to do this per profile. Like so: <pseudo unlang> post-auth { if (sql:groupname == “profile_1”){ <—"just finding out this would be veery helpful" update reply { Alc-Subsc-ID-Str := “%{xlat: profile_1.attribute_1}” } } } </pseudo unlang> I hope the above illustrates what i’m trying to achieve. Actually just being able to check the returned groupname (profile) would get me out of trouble.
But yeah, there should be a quoting column or something I guess. Fell free to submit patches against v4.0.x.
Would love to but i’m afraid the complexity of the server is slightly beyond my skill level :/ Regards, Kris
Hello All, I have been testing the below feature and it looks like the server is successfully performing the expansion of the attributes values when the value is enclosed with the “`” as can be seen below: MariaDB [radius]> SELECT * FROM radgroupreply; +----+-----------+--------------------+----+----------------------------------------------------------------------------------------------------------------------+ | id | groupname | attribute | op | value | +----+-----------+--------------------+----+----------------------------------------------------------------------------------------------------------------------+ | 2 | profile_1 | Framed-IP-Address | := | `%{sql:SELECT framedipaddress from radippool WHERE pool_name='bng1_dyn' AND username='%{Alc-Client-Hardware-Addr}'}` | | 3 | profile_1 | Alc-Subsc-ID-Str | := | `%{Alc-Client-Hardware-Addr}` | | 4 | profile_1 | Alc-Subsc-Prof-Str | := | sub_profile_1 | | 5 | profile_1 | Alc-SLA-Prof-Str | := | sla_profile_1 | +----+-----------+--------------------+----+----------------------------------------------------------------------------------------------------------------------+ 4 rows in set (0.00 sec) The resulting attributes are as follows: (1) Sent Access-Accept Id 178 from 10.100.1.1:1812 to 172.30.30.2:64414 via p1p2 length 0 (1) Framed-IP-Address = 0.0.0.0 (1) Alc-Subsc-ID-Str = "`84:8f:69:f1:16:0a`" (1) Alc-Subsc-Prof-Str = "sub_profile_1" (1) Alc-SLA-Prof-Str = "sla_profile_1" The %{Alc-Client-Hardware-Addr} gets correctly expanded to 84:8f:69:f1:16:0a however the “ `” are still encapsulating the mac. The Framed-IP-Address somehow gets assigned 0.0.0.0 even though debug log show the correct expansion and execution of the SQL query. Can you please advise how to remove the “`” and how to correctly assign the SQL returned value to Framed-IP-Addess attribute? Regards, Kris Full debug: FreeRADIUS Version 3.1.0 Copyright (C) 1999-2016 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/share/freeradius/dictionary including dictionary file /usr/local/share/freeradius/dictionary.dhcp including dictionary file /usr/local/share/freeradius/dictionary.vqp including dictionary file /usr/local/etc/raddb/dictionary including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/mods-enabled/ including configuration file /usr/local/etc/raddb/mods-enabled/pap including configuration file /usr/local/etc/raddb/mods-enabled/sqlippool including configuration file /usr/local/etc/raddb/mods-config/sql/ippool/mysql/queries.conf including configuration file /usr/local/etc/raddb/mods-enabled/digest including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/etc/raddb/mods-enabled/files including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/etc/raddb/mods-enabled/always including configuration file /usr/local/etc/raddb/mods-enabled/sql including configuration file /usr/local/etc/raddb/mods-config/sql/driver/mysql including configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/etc/raddb/mods-enabled/detail including configuration file /usr/local/etc/raddb/mods-enabled/eap_inner including configuration file /usr/local/etc/raddb/mods-enabled/expiration including configuration file /usr/local/etc/raddb/mods-enabled/linelog including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/etc/raddb/mods-enabled/unpack including configuration file /usr/local/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/etc/raddb/mods-enabled/eap including configuration file /usr/local/etc/raddb/mods-enabled/echo including configuration file /usr/local/etc/raddb/mods-enabled/dhcp including configuration file /usr/local/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/etc/raddb/mods-enabled/exec including configuration file /usr/local/etc/raddb/mods-enabled/unix including configuration file /usr/local/etc/raddb/mods-enabled/soh including configuration file /usr/local/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/etc/raddb/mods-enabled/utf8 including configuration file /usr/local/etc/raddb/mods-enabled/realm including configuration file /usr/local/etc/raddb/mods-enabled/mschap including configuration file /usr/local/etc/raddb/mods-enabled/expr including configuration file /usr/local/etc/raddb/mods-enabled/chap including configuration file /usr/local/etc/raddb/mods-enabled/passwd including configuration file /usr/local/etc/raddb/mods-enabled/replicate including configuration file /usr/local/etc/raddb/mods-enabled/dhcp_sqlippool including configuration file /usr/local/etc/raddb/mods-config/sql/ippool-dhcp/mysql/queries.conf including configuration file /usr/local/etc/raddb/mods-enabled/logintime including files in directory /usr/local/etc/raddb/policy.d/ including configuration file /usr/local/etc/raddb/policy.d/canonicalization including configuration file /usr/local/etc/raddb/policy.d/operator-name including configuration file /usr/local/etc/raddb/policy.d/eap including configuration file /usr/local/etc/raddb/policy.d/dhcp including configuration file /usr/local/etc/raddb/policy.d/filter including configuration file /usr/local/etc/raddb/policy.d/cui including configuration file /usr/local/etc/raddb/policy.d/debug including configuration file /usr/local/etc/raddb/policy.d/vendor including configuration file /usr/local/etc/raddb/policy.d/control including configuration file /usr/local/etc/raddb/policy.d/accounting including configuration file /usr/local/etc/raddb/policy.d/abfab-tr including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } name = "radiusd" prefix = "/usr/local" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr/local" localstatedir = "/var" sbindir = "/usr/local/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 continuation_timeout = 15 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = no auth = yes auth_badpass = yes auth_goodpass = yes colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "yes" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dynamic = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 cleanup_delay = 5 max_queue_size = 65536 queue_priority = "default" auto_limit_acct = no } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 recv_buff = 0 } # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = eap listen { type = "auth" ipaddr = * port = 0 recv_buff = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 recv_buff = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 recv_buff = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 recv_buff = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } # Creating Auth-Type = digest radiusd: #### Loading modules #### modules { # Loaded module "rlm_pap" # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module "rlm_sqlippool" # Loading module "sqlippool" from file /usr/local/etc/raddb/mods-enabled/sqlippool sqlippool { sql_module_instance = "sql" lease_duration = 3600 pool_name = "" default_pool = "main_pool" allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < NOW() OR expiry_time IS NULL or expiry_time = 0) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "START TRANSACTION" start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start_commit = "COMMIT" alive_begin = "START TRANSACTION" alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_commit = "COMMIT" stop_begin = "START TRANSACTION" stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_commit = "COMMIT" on_begin = "START TRANSACTION" on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" on_commit = "COMMIT" off_begin = "START TRANSACTION" off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'" off_commit = "COMMIT" messages { exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})" failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})" } } # Loaded module "rlm_digest" # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest # Loaded module "rlm_cache" # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module "rlm_files" # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files files { filename = "/usr/local/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy" } # Loaded module "rlm_radutmp" # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module "rlm_always" # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module "rlm_sql" # Loading module "sql" from file /usr/local/etc/raddb/mods-enabled/sql sql { driver = "rlm_sql_mysql" server = "localhost" port = 3306 login = "radius" password = <<< secret >>> radius_db = "radius" read_groups = yes read_profiles = yes read_clients = yes delete_stale_sessions = yes sql_user_name = "%{User-Name}" group_attribute = "sql-sql-Group" default_user_profile = "" client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas" authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id" authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{sql-sql-Group}' ORDER BY id" authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{sql-sql-Group}' ORDER BY id" group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority" simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL" safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" accounting { reference = "%{tolower:type.%{Acct-Status-Type}.query}" type { accounting-on { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } accounting-off { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})" } start { query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" query = "UPDATE radacct SET acctstarttime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), connectinfo_start = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" } interim-update { query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, %{%{Acct-Session-Time}:-NULL}, '%{Acct-Authentic}', '%{Connect-Info}', '', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } stop { query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'" query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), %{%{Acct-Session-Time}:-NULL}, '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')" } } } post-auth { reference = ".query" query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')" } } rlm_sql (sql) - Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute sql-sql-Group # Loaded module "rlm_exec" # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module "rlm_detail" # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module "rlm_eap" # Loading module "inner-eap" from file /usr/local/etc/raddb/mods-enabled/eap_inner eap inner-eap { default_eap_type = "mschapv2" ignore_unknown_eap_types = no cisco_accounting_username_bug = no } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_tls tls { tls = "tls-peer" require_client_cert = yes include_length = yes } tls-config tls-peer { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.key" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 16384 auto_chain = yes check_crl = no allow_renegotiation = no ecdh_curve = "prime256v1" cache { lifetime = 86400 verify = no } verify { } ocsp { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } staple { enable = no override_cert_url = no use_nonce = yes timeout = 0 softfail = no } } # Loaded module "rlm_expiration" # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Loaded module "rlm_linelog" # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog linelog { destination = "file" delimiter = " " file { filename = "/var/log/radius/linelog" permissions = 384 escape_filenames = no } syslog { severity = "info" } unix { } tcp { port = 514 timeout = 2.000000 } udp { port = 514 timeout = 2.000000 } } # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog linelog log_accounting { destination = "file" delimiter = " " file { filename = "/var/log/radius/linelog-accounting" permissions = 384 escape_filenames = no } syslog { severity = "info" } unix { } tcp { timeout = 1000.000000 } udp { timeout = 1000.000000 } } # Loaded module "rlm_attr_filter" # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response" relaxed = no } # Loaded module "rlm_unpack" # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module "rlm_dynamic_clients" # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" ignore_unknown_eap_types = no cisco_accounting_username_bug = no } # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" require_client_cert = yes include_length = yes } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" ca_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/etc/raddb/certs/dh" fragment_size = 1024 auto_chain = yes check_crl = no cipher_list = "DEFAULT" allow_renegotiation = no ecdh_curve = "prime256v1" cache { lifetime = 86400 verify = no } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } staple { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls - Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls - Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module "rlm_dhcp" # Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module "rlm_unix" # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module "rlm_soh" # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module "rlm_preprocess" # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module "rlm_utf8" # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8 # Loaded module "rlm_realm" # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module "rlm_mschap" # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loaded module "rlm_expr" # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module "rlm_chap" # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap # Loaded module "rlm_passwd" # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module "rlm_replicate" # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate # Loading module "dhcp_sqlippool" from file /usr/local/etc/raddb/mods-enabled/dhcp_sqlippool sqlippool dhcp_sqlippool { sql_module_instance = "sql" lease_duration = 7200 pool_name = "" default_pool = "main_pool" allocate_begin = "START TRANSACTION" allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NOW() WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'" allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (callingstationid = '%{Calling-Station-Id}' or callingstationid = '') ORDER BY (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE" allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{Calling-Station-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 7200 SECOND WHERE framedipaddress = '%I'" allocate_commit = "COMMIT" pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1" start_begin = "START TRANSACTION" start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 7200 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{Calling-Station-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" start_commit = "COMMIT" alive_begin = "START TRANSACTION" alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 7200 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{Calling-Station-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" alive_commit = "COMMIT" stop_begin = "START TRANSACTION" stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NOW() WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{Calling-Station-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'" stop_commit = "COMMIT" on_begin = "START TRANSACTION" on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NOW() WHERE nasipaddress = '%{Nas-IP-Address}'" on_commit = "COMMIT" off_begin = "START TRANSACTION" off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NOW() WHERE nasipaddress = '%{Nas-IP-Address}'" off_commit = "COMMIT" messages { } } # Loaded module "rlm_logintime" # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } instantiate { } } # modules # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap # Instantiating module "sqlippool" from file /usr/local/etc/raddb/mods-enabled/sqlippool # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql rlm_sql_mysql - libmysql version: 10.0.26-MariaDB mysql { tls { } warnings = "auto" } rlm_sql (sql) - Attempting to connect to database "radius" rlm_sql (sql) - Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 connect_timeout = 3.000000 held_trigger_min = 0.000000 held_trigger_max = 0.500000 retry_delay = 30 spread = no } rlm_sql (sql) - Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 rlm_sql (sql) - Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 rlm_sql (sql) - Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 rlm_sql (sql) - Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 rlm_sql (sql) - Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 rlm_sql (sql) - Processing generate_sql_clients rlm_sql (sql) - Query is: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql) - Reserved connection (0) rlm_sql (sql) - Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql) - Adding client 172.30.30.2 (BNG1) to global clients list rlm_sql (sql) - Client "172.30.30.2" (BNG1) added rlm_sql (sql) - Adding client 172.30.30.4 (BNG2) to global clients list rlm_sql (sql) - Client "172.30.30.4" (BNG2) added rlm_sql (sql) - Adding client 172.30.30.254 (BNG_test_V13) to global clients list rlm_sql (sql) - Client "172.30.30.254" (BNG_test_V13) added rlm_sql (sql) - Released connection (0) rlm_sql (sql) - Need 5 more connections to reach 10 spares rlm_sql (sql) - Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap cache_eap - Driver rlm_cache_rbtree loaded and linked # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files reading file /usr/local/etc/raddb/mods-config/files/authorize reading file /usr/local/etc/raddb/mods-config/files/accounting reading file /usr/local/etc/raddb/mods-config/files/pre-proxy # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading file /usr/local/etc/raddb/mods-config/attr_filter/access_reject [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter reading file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log) - 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess reading file /usr/local/etc/raddb/mods-config/preprocess/huntgroups reading file /usr/local/etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap mschap: using internal authentication # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd # Instantiating module "dhcp_sqlippool" from file /usr/local/etc/raddb/mods-enabled/dhcp_sqlippool # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel /usr/local/etc/raddb/sites-enabled/inner-tunnel[157]: Ignoring "ldap" (see raddb/mods-available/README.rst) } # server inner-tunnel server default { # from file /usr/local/etc/raddb/sites-enabled/default /usr/local/etc/raddb/sites-enabled/default[391]: Ignoring "ldap" (see raddb/mods-available/README.rst) } # server default radiusd: #### Opening IP addresses and Ports #### Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Ready to process requests (1) Received Access-Request Id 178 from 172.30.30.2:64414 to 10.100.1.1:1812 via p1p2 length 122 (1) User-Name = "84:8f:69:f1:16:0a" (1) User-Password = "super_secret" (1) NAS-IP-Address = 172.30.30.2 (1) NAS-Identifier = "vSR_BNG1" (1) Alc-Client-Hardware-Addr = "84:8f:69:f1:16:0a" (1) Acct-Session-Id = "0002FF00000134578620FF" (1) Running section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) authorize { (1) filter_username { (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) ... (1) } (1) if (&User-Name =~ /@[^@]*@/ ) { (1) ... (1) } (1) if (&User-Name =~ /\.\./ ) { (1) ... (1) } (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@[^.]+(\.[^.]+)+$/)) { (1) ... (1) } (1) if (&User-Name =~ /\.$/) { (1) ... (1) } (1) if (&User-Name =~ /@\./) { (1) ... (1) } (1) } # if (&User-Name) (notfound) (1) } # filter_username (notfound) (1) preprocess (ok) (1) chap (noop) (1) mschap (noop) (1) digest (noop) (1) suffix - Checking for suffix after "@" (1) suffix - No '@' in User-Name = "84:8f:69:f1:16:0a", looking up realm NULL (1) suffix - No such realm "NULL" (1) suffix (noop) (1) eap - No EAP-Message, not doing EAP (1) eap (noop) (1) files (noop) (1) sql - EXPAND %{User-Name} (1) sql - --> 84:8f:69:f1:16:0a (1) sql - SQL-User-Name set to '84:8f:69:f1:16:0a' (1) sql - Reserved connection (1) (1) sql - EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql - --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = '84:8f:69:f1:16:0a' ORDER BY id (1) sql - Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '84:8f:69:f1:16:0a' ORDER BY id (1) sql - User found in radcheck table (1) sql - Conditional check items matched, merging assignment check items (1) sql - &Cleartext-Password := "super_secret" (1) sql - EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql - --> SELECT id, username, attribute, value, op FROM radreply WHERE username = '84:8f:69:f1:16:0a' ORDER BY id (1) sql - Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = '84:8f:69:f1:16:0a' ORDER BY id (1) sql - EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql - --> SELECT groupname FROM radusergroup WHERE username = '84:8f:69:f1:16:0a' ORDER BY priority (1) sql - Executing select query: SELECT groupname FROM radusergroup WHERE username = '84:8f:69:f1:16:0a' ORDER BY priority (1) sql - User found in the group table (1) sql - EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{sql-sql-Group}' ORDER BY id (1) sql - --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'profile_1' ORDER BY id (1) sql - Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'profile_1' ORDER BY id (1) sql - Group "profile_1": Conditional check items matched (1) sql - Group "profile_1": Merging assignment check items (1) sql - EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{sql-sql-Group}' ORDER BY id (1) sql - --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'profile_1' ORDER BY id (1) sql - Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'profile_1' ORDER BY id (1) sql - Group "profile_1": Merging reply items (1) sql - &Framed-IP-Address = `%{sql:SELECT framedipaddress from radippool WHERE pool_name='bng1_dyn' AND username='%{Alc-Client-Hardware-Addr}'}` (1) sql - &Alc-Subsc-ID-Str := "`%{Alc-Client-Hardware-Addr}`" (1) sql - &Alc-Subsc-Prof-Str := "sub_profile_1" (1) sql - &Alc-SLA-Prof-Str := "sla_profile_1" (1) sql - EXPAND `%{sql:SELECT framedipaddress from radippool WHERE pool_name='bng1_dyn' AND username='%{Alc-Client-Hardware-Addr}'}` (1) sql - Reserved connection (2) (1) sql - Released connection (2) (1) sql - Need 5 more connections to reach 10 spares (1) sql - Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql - Starting connect to MySQL server rlm_sql_mysql - Connected to database 'radius' on Localhost via UNIX socket, server version 10.0.26-MariaDB-wsrep, protocol version 10 (1) sql - Reserved connection (3) (1) sql - Executing select query: SELECT framedipaddress from radippool WHERE pool_name='bng1_dyn' AND username='84:8f:69:f1:16:0a' (1) sql - Released connection (3) (1) sql - --> `192.168.10.3` (1) sql - EXPAND `%{Alc-Client-Hardware-Addr}` (1) sql - --> `84:8f:69:f1:16:0a` (1) sql - Released connection (1) (1) sql (ok) (1) expiration (noop) (1) logintime (noop) (1) pap (updated) (1) } # authorize (updated) (1) Using 'Auth-Type = PAP' for authenticate {...} (1) Running Auth-Type PAP from file /usr/local/etc/raddb/sites-enabled/default (1) Auth-Type PAP { (1) pap - Login attempt with password (1) pap - Comparing with "known good" Cleartext-Password (1) pap - User authenticated successfully (1) pap (ok) (1) } # Auth-Type PAP (ok) (1) Login OK: [84:8f:69:f1:16:0a/super_secret] (from client BNG1 port 0) (1) Running section post-auth from file /usr/local/etc/raddb/sites-enabled/default (1) post-auth { (1) update { (1) &reply: skipped: No values available (1) } # update (noop) (1) sql - EXPAND .query (1) sql - --> .query (1) sql - Using query template 'query' (1) sql - Reserved connection (4) (1) sql - EXPAND %{User-Name} (1) sql - --> 84:8f:69:f1:16:0a (1) sql - SQL-User-Name set to '84:8f:69:f1:16:0a' (1) sql - EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (1) sql - --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '84:8f:69:f1:16:0a', 'super_secret', 'Access-Accept', '2016-07-13 12:08:01') (1) sql - Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '84:8f:69:f1:16:0a', 'super_secret', 'Access-Accept', '2016-07-13 12:08:01') (1) sql - SQL query returned: success (1) sql - 1 record(s) updated (1) sql - Released connection (4) (1) sql (ok) (1) exec (noop) (1) remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) ... (1) } (1) else { (1) noop (noop) (1) } # else (noop) (1) } # remove_reply_message_if_eap (noop) (1) } # post-auth (ok) (1) Sent Access-Accept Id 178 from 10.100.1.1:1812 to 172.30.30.2:64414 via p1p2 length 0 (1) Framed-IP-Address = 0.0.0.0 (1) Alc-Subsc-ID-Str = "`84:8f:69:f1:16:0a`" (1) Alc-Subsc-Prof-Str = "sub_profile_1" (1) Alc-SLA-Prof-Str = "sla_profile_1" (1) Finished request Waking up in 4.9 seconds. ^CWaking up in 2.1 seconds. Signalled to terminate Exiting normally
On 12 Jul 2016, at 17:46, Krzysztof Grobelak <krzysztof.grobelak@enet.ie> wrote:
Hello Arran,
Thanks for the response.
In v3.1.x you can use %{xlat:<value>}
Could you explain a little bit more how to use this feature? I’m unclear how to apply this to the value returned from db. I suspect i need to do it in post-auth section.
I know that I can do the following:
post-auth { update reply { Alc-Subsc-ID-Str := "%{Alc-Client-Hardware-Addr}” } }
And this works but this will update all the reply packet for all successful authentication responses. And i would like to be able to do this per profile.
Like so: <pseudo unlang>
post-auth { if (sql:groupname == “profile_1”){ <—"just finding out this would be veery helpful" update reply { Alc-Subsc-ID-Str := “%{xlat: profile_1.attribute_1}” } } }
</pseudo unlang>
I hope the above illustrates what i’m trying to achieve.
Actually just being able to check the returned groupname (profile) would get me out of trouble.
But yeah, there should be a quoting column or something I guess. Fell free to submit patches against v4.0.x.
Would love to but i’m afraid the complexity of the server is slightly beyond my skill level :/
Regards, Kris
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Jul 13, 2016, at 7:29 AM, Krzysztof Grobelak <krzysztof.grobelak@enet.ie> wrote:
I have been testing the below feature and it looks like the server is successfully performing the expansion of the attributes values when the value is enclosed with the “`” as can be seen below:
That's not supposed to work. If it does work, it works by accident, not by design.
The %{Alc-Client-Hardware-Addr} gets correctly expanded to 84:8f:69:f1:16:0a however the “ `” are still encapsulating the mac. The Framed-IP-Address somehow gets assigned 0.0.0.0 even though debug log show the correct expansion and execution of the SQL query.
Because the string `1.2.3.4` isn't a valid IP address.
Can you please advise how to remove the “`” and how to correctly assign the SQL returned value to Framed-IP-Addess attribute?
Don't use `` in the SQL database. Use the documented features, even if it means a slightly more complex configuration. it will work. Alan DeKok.
Hello Alan, Thanks for response.
On Jul 13, 2016, at 7:29 AM, Krzysztof Grobelak <krzysztof.grobelak@enet.ie> wrote:
I have been testing the below feature and it looks like the server is successfully performing the expansion of the attributes values when the value is enclosed with the “`” as can be seen below:
That's not supposed to work. If it does work, it works by accident, not by design.
Ohhh man… It would be a very cool functionality if it was intended. But lets say you now know its kind of there will you be looking to remove it or embrace it? ;)
The %{Alc-Client-Hardware-Addr} gets correctly expanded to 84:8f:69:f1:16:0a however the “ `” are still encapsulating the mac. The Framed-IP-Address somehow gets assigned 0.0.0.0 even though debug log show the correct expansion and execution of the SQL query.
Because the string `1.2.3.4` isn't a valid IP address.
I kind of suspected that this may be the case.
Can you please advise how to remove the “`” and how to correctly assign the SQL returned value to Framed-IP-Addess attribute?
Don't use `` in the SQL database.
Use the documented features, even if it means a slightly more complex configuration. it will work.
Very well, will look for some other approach. Thanks for great software! Regards, Kris
On Jul 13, 2016, at 11:13 AM, Krzysztof Grobelak <krzysztof.grobelak@enet.ie> wrote:
Ohhh man… It would be a very cool functionality if it was intended. But lets say you now know its kind of there will you be looking to remove it or embrace it? ;)
We will likely remove the support for ``, because it doesn't work. Also, `` are supposed to be for running an external program, i.e. `echo foo`. We are planning to add similar functionality. But it will be documented, consistent, and will work. Alan DeKok.
participants (3)
-
Alan DeKok -
Arran Cudbard-Bell -
Krzysztof Grobelak